- allows monitoring your nextcloud with prometheus
- listens on localhost only, but caddy integration is available
- You can create a Dashboard in Grafana to visualize the collected data
Signed-off-by: Benjamin Brahmer <info@b-brahmer.de>
Co-Authored-By: Simon L. <szaimen@e.mail.de>
This allows all containers to use any secret declared anywhere
in their placeholders but they will not be generated and
written to the configuration until they are used.
Signed-off-by: Alan Savage <3028205+asavageiv@users.noreply.github.com>
In the documentation there is reference of a manipulation to perform in
case the collabora container is missing some permissions to access the
filesystem, however `docker system prune` might not clean what's needed.
Adding `-a` is very broad however but will most definitely clean the
image.
Fixes#6776
Signed-off-by: Thomas Lavocat <tlavocat@redhat.com>
This environment variable when set to "true" will allow usage
of self-signed certificates.
Signed-off-by: Anupam Kumar <kyteinsky@gmail.com>
Signed-off-by: Simon L. <szaimen@e.mail.de>
- Before submitting a bug report, please read through the documentation available at https://github.com/nextcloud/all-in-one#faq
-If you use Cloudflare Tunnel or Cloudflare Proxy, see https://github.com/nextcloud/all-in-one#notes-on-cloudflare-proxytunnel for known issues/limitations and workarounds.
-For issues with Collabora or Talk, make sure to follow https://github.com/nextcloud/all-in-one/discussions/1358. It may already resolve your issue and makes it easier to help you.
-Additional documentation is available here: https://github.com/nextcloud/all-in-one/discussions/categories/wiki
-You should also read through existing questions and their answer here: https://github.com/nextcloud/all-in-one/discussions/categories/questions
- Additional threads can be found here: https://help.nextcloud.com/tag/aio
- Existing feature requests are listed here: https://github.com/nextcloud/all-in-one/discussions/categories/ideas
--->
<!--- Please fill out the whole template below -->
print_red "Docker socket is not available. Cannot continue."
echo"Please make sure to mount the docker socket into /var/run/docker.sock inside the container!"
echo"If you did this by purpose because you don't want the container to have access to the docker socket, see https://github.com/nextcloud/all-in-one/tree/main/manual-install."
print_red "The environmental variable HTTP_PROXY, http_proxy, HTTPS_PROXY, https_proxy, NO_PROXY or no_proxy has been set which is not supported by AIO."
echo"If you need this, then you should use https://github.com/nextcloud/all-in-one/tree/main/manual-install"
<p><a href="https://github.com/nextcloud/all-in-one#how-to-easily-log-in-to-the-aio-interface">Click here for more infos on this feature (e.g. also on how to change the link in the button)</a></p>
This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed. It also covers [mollysocket](https://github.com/nextcloud/all-in-one/tree/main/community-containers/mollysocket) by listening on `mollysocket.$NC_DOMAIN`, if installed.
This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed. It also covers [nextcloud-exporter](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter) by listening on `metrics.$NC_DOMAIN`, if installed.
### Notes
- This container is incompatible with the [npmplus](https://github.com/nextcloud/all-in-one/tree/main/community-containers/npmplus) community container. So make sure that you do not enable both at the same time!
@@ -10,9 +10,9 @@ This container bundles caddy and auto-configures it for you. It also covers [vau
- If you want to use this with [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap), make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
- If you want to use this with [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb), make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
- If you want to use this with [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr), make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
- If you want to use this with [mollysocket](https://github.com/nextcloud/all-in-one/tree/main/community-containers/mollysocket), make sure that you point `mollysocket.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for mollysocket.
- If you want to use this with [nextcloud-exporter](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter), make sure that you point `metrics.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nextcloud-exporter.
- After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
- You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup.
- You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup.**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
This container allows to manage insides of other containers via a GUI inside a Web session by allowing to run docker commands from inside this container.
### Notes
- After adding and starting the container, you need to visit `https://ip.address.of.this.server:5804` in order to log in with the user `container-management` and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning).
- Then, you should see a terminal. There you can use any docker command. ⚠️ Be very carefully while doing that as can break your instance!
- There are also some pre-made scripts that make configuring some of the community containers easier. For example scripts for [LLDAP](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) and [Facerecognition](https://github.com/nextcloud/all-in-one/tree/main/community-containers/facerecognition).
- ⚠️ After you are done doing your operations, remove the container for better security again from the stack: https://github.com/nextcloud/all-in-one/tree/main/community-containers#how-to-remove-containers-from-aios-stack
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -4,7 +4,8 @@ This container bundles the external model of facerecognition and auto-configures
### Notes
- This container needs imaginary in order to analyze modern file format images. Make sure to enable imaginary in the AIO interface before adding this container.
- The image analysis is currently set to fixed value of `1G`. See [this](https://github.com/search?q=repo%3Anextcloud%2Fall-in-one+1G+path%3A%2F%5Ecommunity-containers%5C%2Ffacerecognition%5C%2F%2F&type=code)
- Facerecognition is by default disabled for all users, if you want to enable facerecognition for all users, you can run the following before adding this container:
- Facerecognition is by default disabled for all users. If you want to enable facerecognition for all users, you can run the following commands before adding this container:<br>
**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /facerecognition.sh`.
@@ -22,7 +23,8 @@ This container bundles the external model of facerecognition and auto-configures
# Exit the container shell
exit
```
- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.
- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.<br>
**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -4,7 +4,7 @@ This container bundles fail2ban and auto-configures it for you in order to block
### Notes
- If you get an error like `"ip6tables v1.8.9 (legacy): can't initialize ip6tables table filter': Table does not exist (do you need to insmod?)"`, you need to enable ip6tables on your host via `sudo modprobe ip6table_filter`.
- If you get an error like `stderr: 'iptables: No chain/target/match by that name.'` and `stderr: 'ip6tables: No chain/target/match by that name.'`, you need to follow https://github.com/szaimen/aio-fail2ban/issues/9#issuecomment-2026898790 in order to resolve this.
- You can unban ip addresses like so for example: `docker exec -it nextcloud-aio-fail2ban fail2ban-client set nextcloud unbanip 203.113.167.162`.
- You can unban ip addresses like so for example: `docker exec -it nextcloud-aio-fail2ban fail2ban-client set nextcloud unbanip 203.113.167.162`.**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /lldap.sh`.
This container bundles MollySocket and auto-configures it for you.
### Notes
- This container is only intended to be used over https behind a reverse proxy. You can You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) OR use the [Caddy community container](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy) that will automatically configure mollysocket.$NC_DOMAIN to redirect to your MollySocket.
- This will work with a locally hosted UnifiedPush provider such as [NextPush](https://codeberg.org/NextPush/uppush) if it is hosted at https://mollysocket.$NC_DOMAIN.
- See [here](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) how to add it to the AIO stack.
A Prometheus exporter that collects metrics from your Nextcloud instance for monitoring and alerting.
### How to install
See the [Community Containers documentation](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) for instructions on how to install this in your Nextcloud All-in-One setup.
### Security & Access
**Important:** This container is configured to bind only to `127.0.0.1` (localhost) for security reasons. Prometheus exporters typically don't include authentication, so direct network exposure is not recommended.
#### Access Options
1.**With Caddy Container (Recommended)**: If you also install the [Caddy community container](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy), it will automatically configure secure HTTPS access to your metrics with authentication at `metrics.your-domain.com`
**Getting Authentication Credentials**:
- **Username**: Always `metrics`
- **Password**: After deploying the nextcloud-exporter container, the automatically generated password will be displayed in the AIO interface. Look for it in the container section below the container name "Prometheus Nextcloud Exporter".
2.**Custom Reverse Proxy**: Set up your own reverse proxy (nginx, Apache, etc.) to provide HTTPS and authentication. See configuration guides:
@@ -8,7 +8,7 @@ This container contains a fork of the Nginx Proxy Manager, which is a WebUI for
- After the container was started the first time, please check the logs for errors. Then you can open NPMplus on `https://<ip>:81` and change the password.
- The default password is `iArhP1j7p1P6TA92FA2FMbbUGYqwcYzxC4AVEe12Wbi94FY9gNN62aKyF1shrvG4NycjjX9KfmDQiwkLZH1ZDR9xMjiG2QmoHXi` and the default email is `admin@example.org`
- If you want to use NPMplus behind a domain and outside localhost just create a new proxy host inside the NPMplus which proxies to `https`, `127.0.0.1` and port `81` - all other settings should be the same as for the AIO host.
- If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume
- If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- The data (certs, configs, etc.) of NPMplus will be automatically included in AIOs backup solution!
- **Important:** you always need to enable https for your hosts, since `DISABLE_HTTP` is set to true by default
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -17,4 +17,4 @@ Yes, see [this list](https://github.com/nextcloud/all-in-one/issues/5251) for al
## How to remove containers from AIOs stack?
You can remove containers now via the web interface.
After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`).
After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`).**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
image:ghcr.io/nextcloud-releases/all-in-one:latest# This is the container image used. You can switch to ghcr.io/nextcloud-releases/all-in-one:beta if you want to help testing new releases. See https://github.com/nextcloud/all-in-one#how-to-switch-the-channel
init:true# This setting makes sure that signals from main process inside the container are correctly forwarded to children. See https://docs.docker.com/reference/compose-file/services/#init
restart:always# This makes sure that the container starts always together with the host OS. See https://docs.docker.com/reference/compose-file/services/#restart
container_name:nextcloud-aio-mastercontainer# This line is not allowed to be changed as otherwise AIO will not work correctly
volumes:
- nextcloud_aio_mastercontainer:/mnt/docker-aio-config# This line is not allowed to be changed as otherwise the built-in backup solution will not work
- /var/run/docker.sock:/var/run/docker.sock:ro# May be changed on macOS, Windows or docker rootless. See the applicable documentation. If adjusting, don't forget to also set 'WATCHTOWER_DOCKER_SOCKET_PATH'!
network_mode:bridge# add to the same network as docker run would do
network_mode:bridge# This adds the container to the same network as docker run would do. Comment this line and uncomment the line below and the networks section at the end of the file if you want to define a custom MTU size for the docker network
# networks: ["nextcloud-aio"]
ports:
- 80:80# Can be removed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
- 8080:8080
- 8080:8080# This is the AIO interface, served via https and self-signed certificate. See https://github.com/nextcloud/all-in-one#explanation-of-used-ports
- 8443:8443# Can be removed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
# security_opt: ["label:disable"] # Is needed when using SELinux. See https://github.com/nextcloud/all-in-one#are-there-known-problems-when-selinux-is-enabled
# environment: # Is needed when using any of the options below
# AIO_DISABLE_BACKUP_SECTION: false # Setting this to true allows to hide the backup section in the AIO interface. See https://github.com/nextcloud/all-in-one#how-to-disable-the-backup-section
# APACHE_PORT: 11000 # Is needed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
@@ -35,10 +37,9 @@ services:
# SKIP_DOMAIN_VALIDATION: false # This should only be set to true if things are correctly configured. See https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-skip-the-domain-validation
# TALK_PORT: 3478 # This allows to adjust the port that the talk container is using which is exposed on the host. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-talk-port
# WATCHTOWER_DOCKER_SOCKET_PATH: /var/run/docker.sock # Needs to be specified if the docker socket on the host is not located in the default '/var/run/docker.sock'. Otherwise mastercontainer updates will fail. For macos it needs to be '/var/run/docker.sock'
# security_opt: ["label:disable"] # Is needed when using SELinux
# # Optional: Caddy reverse proxy. See https://github.com/nextcloud/all-in-one/discussions/575
# # Alternatively, use Tailscale if you don't have a domain yet. See https://github.com/nextcloud/all-in-one/discussions/5439
# # Alternatively, use Tailscale if you don't have a domain yet. See https://github.com/nextcloud/all-in-one/discussions/6817
# # Hint: You need to uncomment APACHE_PORT: 11000 above, adjust cloud.example.com to your domain and uncomment the necessary docker volumes at the bottom of this file in order to make it work
# # You can find further examples here: https://github.com/nextcloud/all-in-one/discussions/588
# caddy:
@@ -69,3 +70,10 @@ volumes: # If you want to store the data on a different drive, see https://githu
# caddy_config:
# caddy_data:
# caddy_sites:
# # Adjust the MTU size of the docker network. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-mtu-size-of-the-docker-network
@@ -26,7 +26,7 @@ Simply use https://github.com/nextcloud/all-in-one/issues/6198 as template.
Go to https://github.com/nextcloud-releases/all-in-one/actions/workflows/repo-sync.yml and run the workflow that will first sync the repo and then build new container that automatically get published to `develop` and `develop-arm64`.
## How to test things correctly?
Before testing, make sure that at least the amd64 containers are built successfully by checking the last workflow here: https://github.com/nextcloud-releases/all-in-one/actions/workflows/build_images.yml.
Before testing, make sure that at least the amd64 containers are built successfully by checking the last workflow here: https://github.com/nextcloud-releases/all-in-one/actions/workflows/build_images.yml.
There is a testing-VM available for the maintainer of AIO that allows for some final testing before releasing new version. See [this](https://cloud.nextcloud.com/apps/collectives/Nextcloud%20Handbook/Technical/AIO%20testing%20VM?fileId=6350152) for details.
@@ -47,3 +47,26 @@ This is documented here: https://github.com/nextcloud-releases/all-in-one/tree/m
## How to connect to the database?
Simply run `sudo docker exec -it nextcloud-aio-database psql -U oc_nextcloud nextcloud_database` and you should be in.
## How to locally build and test changes to mastercontainer
1. Ensure you are on the developer channel per the instructions above.
1. Use the commands below from the project root to build the mastercontainer image:
1. Since the hash of a locally built image doesn't match the latest release mastercontainer, it prompts for a mandatory update. To temporarily bypass the update suffix `?bypass_mastercontainer_update` to the URL. Eg: `https://localhost:8080/containers?bypass_mastercontainer_update`
## How to locally build and test changes to other containers using the bypass_container_update param
1. Ensure you are on the developer channel per the instructions above.
1. Use the commands below from the project root to build the container image:
1. Stop the containers using the AIO admin interface.
1. Reload the AIO admin interface with the param `bypass_container_update` to avoid overwriting your local changes, e.g. `https://localhost:8080/containers?bypass_container_update`.
1. Click "Start and update containers" and test your changes. Containers will not be updated, despite the button text.
> This will enable ipv6 for all new docker networks by default! You can alternatively create the `nextcloud-aio` network with ipv6 support by hand manually via docker network create or via compose.yaml.
3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/4989 in order to recreate the network and enable ipv6 for it.
## Docker Desktop (Windows and macOS)
@@ -25,9 +29,12 @@ Then, on Windows and macOS which use Docker Desktop, you need to go into the set
> This will enable ipv6 for all new docker networks by default! You can alternatively create the `nextcloud-aio` network with ipv6 support by hand manually via dockernetwork create or via compose.yaml.
2. Add these values to the json and make sure to keep the other currently values and that you don't see `Unexpected token in JSON at position ...` before attempting to restart by clicking on `Apply & restart`.
3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/4989 in order to recreate the network and enable ipv6 for it.
@@ -9,7 +9,7 @@ It is possible due to several reasons that you do not want or cannot open Nextcl
- [5. Buy a certificate and use that](#5-buy-a-certificate-and-use-that)
## 1. Tailscale
This is the recommended way. For a reverse proxy example guide for Tailscale, see this guide by @flll: https://github.com/nextcloud/all-in-one/discussions/5439
This is the recommended way. For a reverse proxy example guide for Tailscale, see this guide by [@Perseus333](https://github.com/Perseus333): https://github.com/nextcloud/all-in-one/discussions/6817
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
