Merge pull request #6598 from nextcloud/aio-helm-update

Helm Chart updates

Containers/collabora/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/blob/master/docker/from-packages/Dockerfile
-FROM collabora/code:25.04.2.2.1
+FROM collabora/code:25.04.3.1.1
 
 USER root
 ARG DEBIAN_FRONTEND=noninteractive

Containers/mastercontainer/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:28.2.2-cli AS docker
+FROM docker:28.3.0-cli AS docker
 
 # Caddy is a requirement
 FROM caddy:2.10.0-alpine AS caddy
@@ -8,6 +8,9 @@ FROM caddy:2.10.0-alpine AS caddy
 # From https://github.com/docker-library/php/blob/master/8.4/alpine3.21/fpm/Dockerfile
 FROM php:8.4.8-fpm-alpine3.21
 
+ARG AIO_GIT_URL="https://github.com/nextcloud-releases/all-in-one.git"
+ARG AIO_GIT_BRANCH="main"
+
 EXPOSE 80
 EXPOSE 8080
 EXPOSE 8443
@@ -64,7 +67,7 @@ RUN set -ex; \
     wget https://getcomposer.org/installer -O - | php -- --install-dir=/usr/local/bin --filename=composer; \
     chmod +x /usr/local/bin/composer; \
     cd /var/www/docker-aio; \
-    git clone https://github.com/nextcloud-releases/all-in-one.git --depth 1 .; \
+    git clone "$AIO_GIT_URL" --depth 1 --single-branch --branch "$AIO_GIT_BRANCH" .; \
     find ./ -maxdepth 1 -mindepth 1 -not -path ./php -not -path ./community-containers -exec rm -r {} \; ; \
     rm -r ./php/tests; \
     chown www-data:www-data -R /var/www/docker-aio; \

Containers/mastercontainer/daily-backup.sh

@@ -2,6 +2,13 @@
 
 echo "Daily backup script has started"
 
+# Check if initial configuration has been done, otherwise this script should do nothing.
+CONFIG_FILE=/mnt/docker-aio-config/data/configuration.json
+if ! [ -f "$CONFIG_FILE" ] || ! grep -q "wasStartButtonClicked.*1" "$CONFIG_FILE"; then
+    echo "Initial configuration via AIO interface not done yet. Exiting..."
+    exit 0
+fi
+
 # Daily backup and backup check cannot be run at the same time
 if [ "$DAILY_BACKUP" = 1 ] && [ "$CHECK_BACKUP" = 1 ]; then
     echo "Daily backup and backup check cannot be run at the same time. Exiting..."

Containers/mastercontainer/start.sh

@@ -366,4 +366,4 @@ caddy fmt --overwrite /Caddyfile
 chmod 777 /root
 
 # Start supervisord
-/usr/bin/supervisord -c /supervisord.conf
+exec /usr/bin/supervisord -c /supervisord.conf

Containers/nextcloud/entrypoint.sh

@@ -676,7 +676,12 @@ fi
 
 # OnlyOffice
 if [ "$ONLYOFFICE_ENABLED" = 'yes' ]; then
-    while ! nc -z "$ONLYOFFICE_HOST" 80; do
+    if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
+        ONLYOFFICE_PORT=80
+    else
+        ONLYOFFICE_PORT=443
+    fi
+    while ! nc -z "$ONLYOFFICE_HOST" "$ONLYOFFICE_PORT"; do
         echo "waiting for OnlyOffice to become available..."
         sleep 5
     done
@@ -690,7 +695,11 @@ if [ "$ONLYOFFICE_ENABLED" = 'yes' ]; then
     php /var/www/html/occ config:system:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
     php /var/www/html/occ config:app:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
     php /var/www/html/occ config:system:set onlyoffice jwt_header --value="AuthorizationJwt"
-    php /var/www/html/occ config:app:set onlyoffice DocumentServerUrl --value="https://$NC_DOMAIN/onlyoffice"
+    if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
+        ONLYOFFICE_HOST="$NC_DOMAIN/onlyoffice"
+        export ONLYOFFICE_HOST
+    fi
+    php /var/www/html/occ config:app:set onlyoffice DocumentServerUrl --value="https://$ONLYOFFICE_HOST"
 else
     if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/onlyoffice" ] && [ -n "$ONLYOFFICE_SECRET" ] && [ "$(php /var/www/html/occ config:system:get onlyoffice jwt_secret)" = "$ONLYOFFICE_SECRET" ]; then
         php /var/www/html/occ app:remove onlyoffice

Containers/nextcloud/run-exec-commands.sh

@@ -26,4 +26,11 @@ else
     fi
 fi
 
-sleep inf
+signal_handler() {
+    exit 0
+}
+
+trap signal_handler SIGINT SIGTERM
+
+sleep inf &
+wait $!

Containers/talk-recording/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM python:3.13.4-alpine3.21
+FROM python:3.13.5-alpine3.21
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh

Containers/talk/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM nats:2.11.4-scratch AS nats
+FROM nats:2.11.5-scratch AS nats
 FROM eturnal/eturnal:1.12.1 AS eturnal
 FROM strukturag/nextcloud-spreed-signaling:2.0.3 AS signaling
 FROM alpine:3.21.3 AS janus

Containers/watchtower/Dockerfile

@@ -1,11 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM golang:1.24.4-alpine3.21 AS go
-
-RUN set -ex; \
-    apk upgrade --no-cache -a; \
-    apk add --no-cache \
-        build-base; \
-    go install github.com/containrrr/watchtower@76f9cea516593fabb8ca91ff13de55caa6aa0a8b;
+FROM ghcr.io/nicholas-fedor/watchtower:1.11.3 AS watchtower
 
 FROM alpine:3.21.3
 
@@ -13,7 +7,7 @@ RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache bash ca-certificates tzdata
 
-COPY --from=go /go/bin/watchtower /watchtower
+COPY --from=watchtower /watchtower /watchtower
 
 COPY --chmod=775 start.sh /start.sh
 

Containers/watchtower/start.sh

@@ -9,6 +9,13 @@ elif ! test -r /var/run/docker.sock; then
     exit 1
 fi
 
+if [ -f /run/.containerenv ]; then
+    # If running under podman disable memory_swappiness setting in watchtower.
+    # It is a necessary workaround until https://github.com/containers/podman/issues/23824 gets fixed.
+    echo "Running under Podman. Setting WATCHTOWER_DISABLE_MEMORY_SWAPPINESS to 1."
+    export WATCHTOWER_DISABLE_MEMORY_SWAPPINESS=1
+fi
+
 if [ -n "$CONTAINER_TO_UPDATE" ]; then
     exec /watchtower --cleanup --debug --run-once "$CONTAINER_TO_UPDATE"
 else

Containers/whiteboard/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/nextcloud/whiteboard/blob/main/Dockerfile
-FROM ghcr.io/nextcloud-releases/whiteboard:v1.0.5
+FROM ghcr.io/nextcloud-releases/whiteboard:v1.1.2
 
 USER root
 RUN set -ex; \

app/templates/admin.php

@@ -10,7 +10,7 @@ declare(strict_types=1);
  */
 	/** @var array $_ */ ?>
 <div id="allinone" class="section">
-	<h2><?php p($l->t('Nextcloud All-in-One'));?></h2>
+	<h2><?php p($l->t('Nextcloud All-in-One'));?></h2><br/>
 	<a href="<?php p($_['AIOLoginUrl']);?>" class="button" target="_blank">Open Nextcloud AIO Interface ↗</a><br><br>
 	<p><a href="https://github.com/nextcloud/all-in-one#how-to-easily-log-in-to-the-aio-interface">Click here for more infos on this feature (e.g. also on how to change the link in the button)</a></p>
 </div>

community-containers/caddy/readme.md

@@ -1,5 +1,5 @@
 ## Caddy with geoblocking
-This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed. It also covers [mollysocket](https://github.com/nextcloud/all-in-one/tree/main/community-containers/mollysocket) by listening on `mollysocket.$NC_DOMAIN`, if installed.
+This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed.
 
 ### Notes
 - This container is incompatible with the [npmplus](https://github.com/nextcloud/all-in-one/tree/main/community-containers/npmplus) community container. So make sure that you do not enable both at the same time!
@@ -10,9 +10,8 @@ This container bundles caddy and auto-configures it for you. It also covers [vau
 - If you want to use this with [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap), make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
 - If you want to use this with [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb), make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
 - If you want to use this with [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr), make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
-- If you want to use this with [mollysocket](https://github.com/nextcloud/all-in-one/tree/main/community-containers/mollysocket), make sure that you point `mollysocket.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for mollysocket.
 - After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
-- You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup.
+- You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 
 ### Repository

community-containers/container-management/container-management.json

@@ -0,0 +1,41 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-container-management",
+            "display_name": "Container Management",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management",
+            "image": "ghcr.io/szaimen/aio-container-management",
+            "image_tag": "v1",
+            "internal_port": "5804",
+            "restart": "unless-stopped",
+            "ports": [
+                {
+                    "ip_binding": "",
+                    "port_number": "5804",
+                    "protocol": "tcp"
+                }
+            ],
+            "volumes": [
+                {
+                  "source": "%WATCHTOWER_DOCKER_SOCKET_PATH%",
+                  "destination": "/var/run/docker.sock",
+                  "writeable": false
+                }
+            ],
+            "environment": [
+                "TZ=%TIMEZONE%",
+                "SECURE_CONNECTION=1",
+                "WEB_AUTHENTICATION=1",
+                "USER_ID=0",
+                "GROUP_ID=0",
+                "WEB_AUTHENTICATION_USERNAME=container-management",
+                "WEB_AUTHENTICATION_PASSWORD=%CONTAINER_MANAGEMENT_PASSWORD%",
+                "WEB_LISTENING_PORT=5804"
+            ],
+            "secrets": [
+                "CONTAINER_MANAGEMENT_PASSWORD"
+            ],
+            "ui_secret": "CONTAINER_MANAGEMENT_PASSWORD"
+        }
+    ]
+}

community-containers/container-management/readme.md

@@ -0,0 +1,15 @@
+## Container-Management
+This container allows to manage insides of other containers via a GUI inside a Web session by allowing to run docker commands from inside this container.
+
+### Notes
+- After adding and starting the container, you need to visit `https://ip.address.of.this.server:5804` in order to log in with the user `container-management` and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning).
+- Then, you should see a terminal. There you can use any docker command. ⚠️ Be very carefully while doing that as can break your instance!
+- There are also some pre-made scripts that make configuring some of the community containers easier. For example scripts for [LLDAP](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) and [Facerecognition](https://github.com/nextcloud/all-in-one/tree/main/community-containers/facerecognition).
+- ⚠️ After you are done doing your operations, remove the container for better security again from the stack: https://github.com/nextcloud/all-in-one/tree/main/community-containers#how-to-remove-containers-from-aios-stack
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/szaimen/aio-container-management
+
+### Maintainer
+https://github.com/szaimen

community-containers/facerecognition/readme.md

@@ -4,7 +4,8 @@ This container bundles the external model of facerecognition and auto-configures
 ### Notes
 - This container needs imaginary in order to analyze modern file format images. Make sure to enable imaginary in the AIO interface before adding this container.
 - The image analysis is currently set to fixed value of `1G`. See [this](https://github.com/search?q=repo%3Anextcloud%2Fall-in-one+1G+path%3A%2F%5Ecommunity-containers%5C%2Ffacerecognition%5C%2F%2F&type=code)
-- Facerecognition is by default disabled for all users, if you want to enable facerecognition for all users, you can run the following before adding this container:
+- Facerecognition is by default disabled for all users. If you want to enable facerecognition for all users, you can run the following commands before adding this container:<br>
+**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /facerecognition.sh`.
     ```bash
     # Go into the container
     sudo docker exec --user www-data -it nextcloud-aio-nextcloud bash
@@ -22,7 +23,8 @@ This container bundles the external model of facerecognition and auto-configures
     # Exit the container shell
     exit
     ```
-- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.
+- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.<br>
+**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 
 ### Repository

community-containers/fail2ban/readme.md

@@ -4,7 +4,7 @@ This container bundles fail2ban and auto-configures it for you in order to block
 ### Notes
 - If you get an error like `"ip6tables v1.8.9 (legacy): can't initialize ip6tables table filter': Table does not exist (do you need to insmod?)"`, you need to enable ip6tables on your host via `sudo modprobe ip6table_filter`.
 - If you get an error like  `stderr: 'iptables: No chain/target/match by that name.'` and `stderr: 'ip6tables: No chain/target/match by that name.'`, you need to follow https://github.com/szaimen/aio-fail2ban/issues/9#issuecomment-2026898790 in order to resolve this.
-- You can unban ip addresses like so for example: `docker exec -it nextcloud-aio-fail2ban fail2ban-client set nextcloud unbanip 203.113.167.162`.
+- You can unban ip addresses like so for example: `docker exec -it nextcloud-aio-fail2ban fail2ban-client set nextcloud unbanip 203.113.167.162`. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 
 ### Repository

community-containers/lldap/readme.md

@@ -23,7 +23,8 @@ First, you need to retrieve the LLDAP admin password, this will be used later on
 sudo docker inspect nextcloud-aio-lldap | grep LLDAP_LDAP_USER_PASS
 ```
 
-Now go into the Nextcloud container:
+Now go into the Nextcloud container:<br>
+**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /lldap.sh`.
 ```bash
 sudo docker exec --user www-data -it nextcloud-aio-nextcloud bash
 ```

community-containers/mollysocket/mollysocket.json

@@ -1,37 +0,0 @@
-{
-    "aio_services_v1": [
-        {
-            "container_name": "nextcloud-aio-mollysocket",
-            "display_name": "MollySocket",
-            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/mollysocket",
-            "image": "ghcr.io/mollyim/mollysocket",
-            "image_tag": "1",
-            "restart": "unless-stopped",
-            "ports": [
-                { 
-                   "ip_binding": "%APACHE_IP_BINDING%", 
-                   "port_number": "8020", 
-                   "protocol": "tcp" 
-                 }  
-            ],
-            "volumes": [
-                {
-                    "source": "nextcloud_aio_mollysocket",
-                    "destination": "/data",
-                    "writeable": true
-                }
-            ],
-            "working_dir": "/data",
-            "command": "server",
-            "environment": [
-                "TZ=%TIMEZONE%",
-                "MOLLY_DB=/data/mollysocket.db",
-                "MOLLY_ALLOWED_ENDPOINTS=[\"*\",\"https://mollysocket.%NC_DOMAIN%\"]",
-                "MOLLY_ALLOWED_UUIDS=[\"*\"]",
-                "MOLLY_HOST=0.0.0.0",
-                "MOLLY_PORT=8020",
-                "RUST_LOG=error"
-            ]
-        }
-    ]
-}

community-containers/mollysocket/readme.md

@@ -1,13 +0,0 @@
-## MollySocket
-This container bundles MollySocket and auto-configures it for you.
-
-### Notes
-- This container is only intended to be used over https behind a reverse proxy. You can You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) OR use the [Caddy community container](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy) that will automatically configure mollysocket.$NC_DOMAIN to redirect to your MollySocket.
-- This will work with a locally hosted UnifiedPush provider such as [NextPush](https://codeberg.org/NextPush/uppush) if it is hosted at https://mollysocket.$NC_DOMAIN.
-- See [here](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) how to add it to the AIO stack.
-
-### Repository
-https://github.com/mollyim/mollysocket
-
-### Maintainer
-https://github.com/Anvil5465

community-containers/npmplus/readme.md

@@ -8,7 +8,7 @@ This container contains a fork of the Nginx Proxy Manager, which is a WebUI for
 - After the container was started the first time, please check the logs for errors. Then you can open NPMplus on `https://<ip>:81` and change the password. 
 - The default password is `iArhP1j7p1P6TA92FA2FMbbUGYqwcYzxC4AVEe12Wbi94FY9gNN62aKyF1shrvG4NycjjX9KfmDQiwkLZH1ZDR9xMjiG2QmoHXi` and the default email is `admin@example.org`
 - If you want to use NPMplus behind a domain and outside localhost just create a new proxy host inside the NPMplus which proxies to `https`, `127.0.0.1` and port `81` - all other settings should be the same as for the AIO host.
-- If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume
+- If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 - The data (certs, configs, etc.) of NPMplus will be automatically included in AIOs backup solution!
 - **Important:** you always need to enable https for your hosts, since `DISABLE_HTTP` is set to true by default
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack

community-containers/readme.md

@@ -17,4 +17,4 @@ Yes, see [this list](https://github.com/nextcloud/all-in-one/issues/5251) for al
 ## How to remove containers from AIOs stack?
 You can remove containers now via the web interface.
 
-After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`).
+After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`). **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management

develop.md

@@ -47,3 +47,13 @@ This is documented here: https://github.com/nextcloud-releases/all-in-one/tree/m
 
 ## How to connect to the database?
 Simply run `sudo docker exec -it nextcloud-aio-database psql -U oc_nextcloud nextcloud_database` and you should be in.
+
+## How to locally build and test changes to mastercontainer?
+1. Push changes to your own git fork and branch.
+1. Use below commands to build mastercontainer image for a custom git url and branch:
+```
+cd Containers/mastercontainer
+docker buildx build -t ghcr.io/nextcloud-releases/all-in-one:latest --build-arg AIO_GIT_URL="https://github.com/my-fork-repo/all-in-one.git" --build-arg AIO_GIT_BRANCH="my-feature-branch" --load .
+```
+1. Start a container with above built image.
+1. Since the hash of a locally built image doesn't match the latest release mastercontainer, it prompts for a mandatory update. To temporarily bypass the update suffix `?bypass_mastercontainer_update` to the URL. Eg: `https://localhost:8080/containers?bypass_mastercontainer_update`

docker-ipv6-support.md

@@ -4,19 +4,23 @@
 First of all upgrade your docker installation to v27.0.1 or higher.
 1. Then edit `/etc/docker/daemon.json` (or `~/.config/docker/daemon.json` in case of docker-rootless), add the below json:
 
-    ```json
-    {
-      "default-network-opts": {"bridge":{"com.docker.network.enable_ipv6":"true"}}
-    }
-    ```
+> [!WARNING]
+> This will enable ipv6 for all new docker networks by default! You can alternatively create the `nextcloud-aio` network with ipv6 support by hand manually via docker network create or via compose.yaml.
 
-    Save the file.
+```json
+{
+    "default-network-opts": {"bridge":{"com.docker.network.enable_ipv6":"true"}}
+}
+```
+
+And save the file.
 
 2.  Reload the Docker configuration file.
 
-    ```console
-    sudo systemctl restart docker
-    ```
+```console
+sudo systemctl restart docker
+```
+
 3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/4989 in order to recreate the network and enable ipv6 for it.
 
 ## Docker Desktop (Windows and macOS)
@@ -25,9 +29,12 @@ Then, on Windows and macOS which use Docker Desktop, you need to go into the set
 
 1. You need to now adjust this json file:
 
-    ```
-    "default-network-opts": {"bridge":{"com.docker.network.enable_ipv6":"true"}}
-    ```
+> [!WARNING]
+> This will enable ipv6 for all new docker networks by default! You can alternatively create the `nextcloud-aio` network with ipv6 support by hand manually via docker network create or via compose.yaml.
+
+```json
+"default-network-opts": {"bridge":{"com.docker.network.enable_ipv6":"true"}}
+```
 
 2. Add these values to the json and make sure to keep the other currently values and that you don't see `Unexpected token in JSON at position ...` before attempting to restart by clicking on `Apply & restart`.
 3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/4989 in order to recreate the network and enable ipv6 for it.

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 11.1.0
+version: 11.2.1
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -61,7 +61,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: WHITEBOARD_HOST
               value: nextcloud-aio-whiteboard
-          image: ghcr.io/nextcloud-releases/aio-apache:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-apache:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -36,7 +36,7 @@ spec:
         {{- end }}
       initContainers:
         - name: init-subpath
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250701_092737
           command:
             - mkdir
             - "-p"
@@ -59,7 +59,7 @@ spec:
               value: "{{ .Values.NEXTCLOUD_UPLOAD_LIMIT }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-clamav:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-clamav:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -35,7 +35,7 @@ spec:
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: ghcr.io/nextcloud-releases/aio-collabora:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-collabora:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -35,7 +35,7 @@ spec:
         {{- end }}
       initContainers:
         - name: init-subpath
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250701_092737
           command:
             - mkdir
             - "-p"
@@ -64,7 +64,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-postgresql:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-postgresql:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -24,7 +24,7 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250701_092737
           command:
             - chmod
             - "777"
@@ -54,7 +54,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: ghcr.io/nextcloud-releases/aio-fulltextsearch:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-fulltextsearch:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -38,7 +38,7 @@ spec:
               value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-imaginary:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-imaginary:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -38,7 +38,7 @@ spec:
 # AIO settings start # Do not remove or change this line!
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250701_092737
           command:
             - chmod
             - "777"
@@ -182,7 +182,7 @@ spec:
               value: "{{ .Values.WHITEBOARD_ENABLED }}"
             - name: WHITEBOARD_SECRET
               value: "{{ .Values.WHITEBOARD_SECRET }}"
-          image: ghcr.io/nextcloud-releases/aio-nextcloud:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-nextcloud:20250701_092737
           {{- if eq (.Values.RPSS_ENABLED | default "no") "yes" }} # AIO-config - do not change this comment!
           securityContext:
             # The items below only work in container context

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -55,7 +55,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-notify-push:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-notify-push:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -24,7 +24,7 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250701_092737
           command:
             - chmod
             - "777"
@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-onlyoffice:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-onlyoffice:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -39,7 +39,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-redis:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-redis:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -52,7 +52,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-talk:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-talk:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -44,7 +44,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-talk-recording:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-talk-recording:20250701_092737
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-whiteboard-deployment.yaml

@@ -48,7 +48,7 @@ spec:
               value: redis
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-whiteboard:20250619_082329
+          image: ghcr.io/nextcloud-releases/aio-whiteboard:20250701_092737
           readinessProbe:
             exec:
               command:

php/composer.lock

@@ -3875,16 +3875,16 @@
         },
         {
             "name": "symfony/console",
-            "version": "v6.4.22",
+            "version": "v6.4.23",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/console.git",
-                "reference": "7d29659bc3c9d8e9a34e2c3414ef9e9e003e6cf3"
+                "reference": "9056771b8eca08d026cd3280deeec3cfd99c4d93"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/console/zipball/7d29659bc3c9d8e9a34e2c3414ef9e9e003e6cf3",
-                "reference": "7d29659bc3c9d8e9a34e2c3414ef9e9e003e6cf3",
+                "url": "https://api.github.com/repos/symfony/console/zipball/9056771b8eca08d026cd3280deeec3cfd99c4d93",
+                "reference": "9056771b8eca08d026cd3280deeec3cfd99c4d93",
                 "shasum": ""
             },
             "require": {
@@ -3949,7 +3949,7 @@
                 "terminal"
             ],
             "support": {
-                "source": "https://github.com/symfony/console/tree/v6.4.22"
+                "source": "https://github.com/symfony/console/tree/v6.4.23"
             },
             "funding": [
                 {
@@ -3965,7 +3965,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2025-05-07T07:05:04+00:00"
+            "time": "2025-06-27T19:37:22+00:00"
         },
         {
             "name": "symfony/filesystem",

php/public/index.php

@@ -82,6 +82,11 @@ $app->get('/containers', function (Request $request, Response $response, array $
     $dockerController = $container->get(\AIO\Controller\DockerController::class);
     $dockerActionManger->ConnectMasterContainerToNetwork();
     $dockerController->StartDomaincheckContainer();
+
+    // Check if bypass_mastercontainer_update is provided on the URL, a special developer mode to bypass a mastercontainer update and use local image.
+    $params = $request->getQueryParams();
+    $bypass_mastercontainer_update = isset($params['bypass_mastercontainer_update']);
+
     return $view->render($response, 'containers.twig', [
         'domain' => $configurationManager->GetDomain(),
         'apache_port' => $configurationManager->GetApachePort(),
@@ -91,7 +96,7 @@ $app->get('/containers', function (Request $request, Response $response, array $
         'nextcloud_password' => $configurationManager->GetAndGenerateSecret('NEXTCLOUD_PASSWORD'),
         'containers' => (new \AIO\ContainerDefinitionFetcher($container->get(\AIO\Data\ConfigurationManager::class), $container))->FetchDefinition(),
         'borgbackup_password' => $configurationManager->GetAndGenerateSecret('BORGBACKUP_PASSWORD'),
-        'is_mastercontainer_update_available' => $dockerActionManger->IsMastercontainerUpdateAvailable(),
+        'is_mastercontainer_update_available' => ( $bypass_mastercontainer_update ? false : $dockerActionManger->IsMastercontainerUpdateAvailable() ),
         'has_backup_run_once' => $configurationManager->hasBackupRunOnce(),
         'is_backup_container_running' => $dockerActionManger->isBackupContainerRunning(),
         'backup_exit_code' => $dockerActionManger->GetBackupcontainerExitCode(),

php/templates/containers.twig

@@ -17,7 +17,7 @@
 
     <div class="container">
         <main>
-            <h1>Nextcloud AIO v11.1.0</h1>
+            <h1>Nextcloud AIO v11.2.1</h1>
 
             {# Add 2nd tab warning #}
             <script type="text/javascript" src="second-tab-warning.js"></script>

readme.md

@@ -81,6 +81,9 @@ Included are:
 | ![image](https://github.com/user-attachments/assets/6ef5d7b5-86f2-402c-bc6c-b633af2ca7dd) | ![image](https://github.com/user-attachments/assets/939d0fdf-436f-433d-82d3-27548263a040) |
 
 ## How to use this?
+>[!WARNING]
+> You should first make sure that you are not using docker installed via snap. You can check this by running `sudo docker info | grep "Docker Root Dir" | grep "/var/snap/docker/"`. If the output should contain the mentioned string `/var/snap/docker/`, you should first uninstall docker snap via `sudo snap remove docker` and then follow the instructions below. ⚠️ Attention: only run the command if this is a clean new docker installation and you are not running any service already using this.
+
 > [!NOTE]
 > The following instructions are meant for installations without a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) already being in place. If you want to run AIO behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else), see the [reverse proxy documentation](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md). Also, the instructions below are especially meant for Linux. For macOS see [this](#how-to-run-aio-on-macos), for Windows see [this](#how-to-run-aio-on-windows) and for Synology see [this](#how-to-run-aio-on-synology-dsm).
 
@@ -567,16 +570,16 @@ On older TrueNAS SCALE releases with Kubernetes environment, there are two ways
 Another but untested way is to install Portainer on your TrueNAS SCALE from here https://truecharts.org/charts/stable/portainer/installation-notes and add the Helm-chart repository https://nextcloud.github.io/all-in-one/ into Portainer by following https://docs.portainer.io/user/kubernetes/helm. More docs on AIOs Helm Chart are available here: https://github.com/nextcloud/all-in-one/tree/main/nextcloud-aio-helm-chart#nextcloud-aio-helm-chart.
 
 ### How to run `occ` commands?
-Simply run the following: `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ your-command`. Of course `your-command` needs to be exchanged with the command that you want to run.
+Simply run the following: `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ your-command`. Of course `your-command` needs to be exchanged with the command that you want to run. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 
 ### How to resolve `Security & setup warnings displays the "missing default phone region" after initial install`?
-Simply run the following command: `sudo docker exec --user www-data nextcloud-aio-nextcloud php occ config:system:set default_phone_region --value="yourvalue"`. Of course you need to modify `yourvalue` based on your location. Examples are `DE`, `US` and `GB`. See this list for more codes: https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2#Officially_assigned_code_elements
+Simply run the following command: `sudo docker exec --user www-data nextcloud-aio-nextcloud php occ config:system:set default_phone_region --value="yourvalue"`. Of course you need to modify `yourvalue` based on your location. Examples are `DE`, `US` and `GB`. See this list for more codes: https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2#Officially_assigned_code_elements **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 
 ### How to run multiple AIO instances on one server?
 See [multiple-instances.md](./multiple-instances.md) for some documentation on this.
 
 ### Bruteforce protection FAQ
-Nextcloud features a built-in bruteforce protection which may get triggered and will block an ip-address or disable a user. You can unblock an ip-address by running `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ security:bruteforce:reset <ip-address>` and enable a disabled user by running `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ user:enable <name of user>`. See https://docs.nextcloud.com/server/latest/admin_manual/configuration_server/occ_command.html#security for further information.
+Nextcloud features a built-in bruteforce protection which may get triggered and will block an ip-address or disable a user. You can unblock an ip-address by running `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ security:bruteforce:reset <ip-address>` and enable a disabled user by running `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ user:enable <name of user>`. See https://docs.nextcloud.com/server/latest/admin_manual/configuration_server/occ_command.html#security for further information. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 
 ### How to switch the channel?
 You can switch to a different channel like e.g. the beta channel or from the beta channel back to the latest channel by stopping the mastercontainer, removing it (no data will be lost) and recreating the container using the same command that you used initially to create the mastercontainer. You simply need to change the last line `ghcr.io/nextcloud-releases/all-in-one:latest` to `ghcr.io/nextcloud-releases/all-in-one:beta` and vice versa.
@@ -658,10 +661,10 @@ Since Podman is not 100% compatible with the Docker API, Podman is not supported
 ### Access/Edit Nextcloud files/folders manually
 The files and folders that you add to Nextcloud are by default stored in the following docker directory: `nextcloud_aio_nextcloud:/mnt/ncdata/` (usually `/var/lib/docker/volumes/nextcloud_aio_nextcloud_data/_data/` on linux host systems). If needed, you can modify/add/delete files/folders there but **ATTENTION**: be very careful when doing so because you might corrupt your AIO installation! Best is to create a backup using the built-in backup solution before editing/changing files/folders in there because you will then be able to restore your instance to the backed up state.
 
-After you are done modifying/adding/deleting files/folders, don't forget to apply the correct permissions by running: `sudo docker exec nextcloud-aio-nextcloud chown -R 33:0 /mnt/ncdata/` and `sudo docker exec nextcloud-aio-nextcloud chmod -R 750 /mnt/ncdata/` and rescan the files with `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan --all`.
+After you are done modifying/adding/deleting files/folders, don't forget to apply the correct permissions by running: `sudo docker exec nextcloud-aio-nextcloud chown -R 33:0 /mnt/ncdata/` and `sudo docker exec nextcloud-aio-nextcloud chmod -R 750 /mnt/ncdata/` and rescan the files with `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan --all`. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 
 ### How to edit Nextclouds config.php file with a texteditor?
-You can edit Nextclouds config.php file directly from the host with your favorite text editor. E.g. like this: `sudo docker run -it --rm --volume nextcloud_aio_nextcloud:/var/www/html:rw alpine sh -c "apk add --no-cache nano && nano /var/www/html/config/config.php"`. Make sure to not break the file though which might corrupt your Nextcloud instance otherwise. In best case, create a backup using the built-in backup solution before editing the file.
+You can edit Nextclouds config.php file directly from the host with your favorite text editor. E.g. like this: `sudo docker run -it --rm --volume nextcloud_aio_nextcloud:/var/www/html:rw alpine sh -c "apk add --no-cache nano && nano /var/www/html/config/config.php"`. Make sure to not break the file though which might corrupt your Nextcloud instance otherwise. In best case, create a backup using the built-in backup solution before editing the file. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 
 ### How to change default files by creating a custom skeleton directory?
 All users see a set of [default files and folders](https://docs.nextcloud.com/server/latest/admin_manual/configuration_files/default_files_configuration.html) as dictated by Nextcloud's configuration.  To change these default files and folders a custom skeleton directory must first be created; this can be accomplished by copying your skeleton files `sudo docker cp --follow-link /path/to/nextcloud/skeleton/ nextcloud-aio-nextcloud:/mnt/ncdata/skeleton/`, applying the correct permissions with `sudo docker exec nextcloud-aio-nextcloud chown -R 33:0 /mnt/ncdata/skeleton/` and `sudo docker exec nextcloud-aio-nextcloud chmod -R 750 /mnt/ncdata/skeleton/` and setting the skeleton directory option with `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:system:set skeletondirectory --value="/mnt/ncdata/skeleton"`.  Further information is available in the Nextcloud documentation on [configuration parameters for the skeleton directory](https://docs.nextcloud.com/server/stable/admin_manual/configuration_server/config_sample_php_parameters.html#skeletondirectory).
@@ -801,7 +804,7 @@ If you have the borg backup feature enabled, you can copy it over to the new hos
     1. Note the path where the backups are stored and the encryption password
 1. Navigate to the backup folder
 1. Create archive of the backup so it's easier to copy: `tar -czvf borg.tar.gz borg`
-1. Copy the archive over to the new host: `cp borg.tar.gz user@new.host:/mnt`. Make sure to replace `user` with your actual user and `new.host` with the IP or domain of the actual host. You can also use another way to copy the archive.
+1. Copy the archive over to the new host: `scp borg.tar.gz user@new.host:/mnt`. Make sure to replace `user` with your actual user and `new.host` with the IP or domain of the actual host. You can also use another way to copy the archive.
 1. Switch to the new host
 1. Go to the folder you put the backup archive and extract it with `tar -xf borg.tar.gz`
 1. Follow the installation guide to create a new aio instance, but do not start the containers yet (the `docker run` or `docker compose up -d` command)
@@ -1057,7 +1060,7 @@ Netdata allows you to monitor your server using a GUI. You can install it by fol
 If you want to use the user_sql app, the easiest way is to create an additional database container and add it to the docker network `nextcloud-aio`. Then the Nextcloud container should be able to talk to the database container using its name.
 
 ### phpMyAdmin, Adminer or pgAdmin
-It is possible to install any of these to get a GUI for your AIO database. The pgAdmin container is recommended. You can get some docs on it here: https://www.pgadmin.org/docs/pgadmin4/latest/container_deployment.html. For the container to connect to the aio-database, you need to connect the container to the docker network `nextcloud-aio` and use `nextcloud-aio-database` as database host, `oc_nextcloud` as database username and the password that you get when running `sudo docker exec nextcloud-aio-nextcloud grep dbpassword config/config.php` as the password. Apart from that there is now a way for the community to add containers: https://github.com/nextcloud/all-in-one/discussions/3061#discussioncomment-7307045
+It is possible to install any of these to get a GUI for your AIO database. The pgAdmin container is recommended. You can get some docs on it here: https://www.pgadmin.org/docs/pgadmin4/latest/container_deployment.html. For the container to connect to the aio-database, you need to connect the container to the docker network `nextcloud-aio` and use `nextcloud-aio-database` as database host, `oc_nextcloud` as database username and the password that you get when running `sudo docker exec nextcloud-aio-nextcloud grep dbpassword config/config.php` as the password. Apart from that there is now a way for the community to add containers: https://github.com/nextcloud/all-in-one/discussions/3061#discussioncomment-7307045 **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 
 ### Mail server
 You can configure one yourself by using either of these four recommended projects: [Docker Mailserver](https://github.com/docker-mailserver/docker-mailserver/#docker-mailserver), [Mailu](https://github.com/Mailu/Mailu), [Maddy Mail Server](https://github.com/foxcpp/maddy#maddy-mail-server), [Mailcow](https://github.com/mailcow/mailcow-dockerized#mailcow-dockerized-------) or [Stalwart](https://stalw.art/). There is now a community container which allows to easily add Stalwart Mail server to AIO: https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart

reverse-proxy.md

@@ -273,7 +273,7 @@ Although it does not seem like it is the case but from AIO perspective a Cloudfl
 ⚠️ **Please note:** look into [this](#adapting-the-sample-web-server-configurations-below) to adapt the above example configuration.
 1. Now continue with [point 2](#2-use-this-startup-command) but add `--env SKIP_DOMAIN_VALIDATION=true` to the docker run command - which will disable the domain validation (because it is known that the domain validation will not work behind a Cloudflare Tunnel).
 
-**Advice:** Make sure to [disable Cloudflares Rocket Loader feature](https://help.nextcloud.com/t/login-page-not-working-solved/149417/8) as otherwise Nextcloud's login prompt will not be shown.
+**Advice:** Make sure to [disable Cloudflare's Rocket Loader feature](https://help.nextcloud.com/t/login-page-not-working-solved/149417/8) as otherwise Nextcloud's login prompt will not be shown.
 
 </details>