Merge pull request #4417 from nextcloud/aio-helm-update

Helm Chart updates

Containers/mastercontainer/start.sh

@@ -344,6 +344,7 @@ fi
 print_green "Initial startup of Nextcloud All-in-One complete!
 You should be able to open the Nextcloud AIO Interface now on port 8080 of this server!
 E.g. https://internal.ip.of.this.server:8080
+⚠️ Important: do always use an ip-address if you access this port and not a domain as HSTS might block access to it later!
 
 If your server has port 80 and 8443 open and you point a domain to your server, you can get a valid certificate automatically by opening the Nextcloud AIO Interface via:
 https://your-domain-that-points-to-this-server.tld:8443"

community-containers/readme.md

@@ -9,13 +9,13 @@ All containers that are in this directory are community maintained so the respon
 ## How to use this?
 Before adding any additional container, make sure to create a backup via the AIO interface!
 
-Afterwards, you might want to add additional community containers to the default AIO stack. You can do so by adding `--env AIO_COMMUNITY_CONTAINERS="container1 container2"` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and customize the value to your fitting. It must match the folder names in this directory! ⚠️⚠️⚠️ Please review the folder for documentation on each of the containers before adding them! Not reviewing the documentation for each of them first might break starting the AIO containers because e.g. fail2ban only works on Linux and not on Docker Desktop!
+Afterwards, you might want to add additional community containers to the default AIO stack. You can do so by adding `--env AIO_COMMUNITY_CONTAINERS="container1 container2"` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and customize the value to your fitting. It must match the folder names in this directory! ⚠️⚠️⚠️ Please review the folder for documentation on each of the containers before adding them! Not reviewing the documentation for each of them first might break starting the AIO containers because e.g. fail2ban only works on Linux and not on Docker Desktop! **Hint:** If the containers where running already, in order to actually start the added container, you need to click on `Stop containers` and the `Update and start containers` in order to actually start it.
 
 ## How to add containers?
 Simply submit a PR by creating a new folder in this directory: https://github.com/nextcloud/all-in-one/tree/main/community-containers with the name of your container. It must include a json file with the same name and with correct syntax and a readme.md with additional information. You might get inspired by caddy, fail2ban, local-ai, libretranslate, plex, pi-hole or vaultwarden (subfolders in this directory). For a full-blown example of the json file, see https://github.com/nextcloud/all-in-one/blob/main/php/containers.json. The json-schema that it validates against can be found here: https://github.com/nextcloud/all-in-one/blob/main/php/containers-schema.json.
 
 ### Is there a list of ideas for new community containers?
-Yes, see [this list](https://github.com/nextcloud/all-in-one/discussions/categories/ideas?discussions_q=is%3Aopen+category%3AIdeas+label%3A%22help+wanted%22) for already existing ideas for new community containers. Feel free to pick one up and add it to this folder by following the instructions above.
+Yes, see [this list](https://github.com/nextcloud/all-in-one/discussions/categories/ideas?discussions_q=is%3Aopen+category%3AIdeas+label%3A%22help+wanted%22+sort%3Atop) for already existing ideas for new community containers. Feel free to pick one up and add it to this folder by following the instructions above.
 
 ## How to remove containers from AIOs stack?
 In some cases, you might want to remove some community containers from the AIO stack again. Here is how to do this.

manual-install/latest.yml

@@ -149,6 +149,7 @@ services:
       - REMOVE_DISABLED_APPS=${REMOVE_DISABLED_APPS}
       - APACHE_PORT=${APACHE_PORT}
       - APACHE_IP_BINDING=${APACHE_IP_BINDING}
+      - IMAGINARY_SECRET=${IMAGINARY_SECRET}
     stop_grace_period: 600s
     restart: unless-stopped
     networks:
@@ -322,6 +323,7 @@ services:
       - "9000"
     environment:
       - TZ=${TIMEZONE}
+      - IMAGINARY_SECRET=${IMAGINARY_SECRET}
     restart: unless-stopped
     cap_add:
       - SYS_NICE

manual-install/sample.conf

@@ -1,5 +1,6 @@
 DATABASE_PASSWORD=          # TODO! This needs to be a unique and good password!
 FULLTEXTSEARCH_PASSWORD=          # TODO! This needs to be a unique and good password!
+IMAGINARY_SECRET=          # TODO! This needs to be a unique and good password!
 NC_DOMAIN=yourdomain.com          # TODO! Needs to be changed to the domain that you want to use for Nextcloud.
 NEXTCLOUD_PASSWORD=          # TODO! This is the password of the initially created Nextcloud admin with username "admin".
 ONLYOFFICE_SECRET=          # TODO! This needs to be a unique and good password!

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 7.13.1
+version: 8.0.0
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -26,7 +26,11 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -61,7 +65,7 @@ spec:
               value: nextcloud-aio-talk
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-apache:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-apache:20240321_080708-latest
           name: nextcloud-aio-apache
           ports:
             - containerPort: {{ .Values.APACHE_PORT }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -27,7 +27,11 @@ spec:
     spec:
       initContainers:
         - name: init-subpath
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - mkdir
             - "-p"
@@ -37,7 +41,11 @@ spec:
             - name: nextcloud-aio-clamav
               mountPath: /nextcloud-aio-clamav
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chown
             - 100:100
@@ -52,7 +60,7 @@ spec:
               value: "90"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-clamav:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-clamav:20240321_080708-latest
           name: nextcloud-aio-clamav
           ports:
             - containerPort: 3310

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -37,7 +37,7 @@ spec:
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true {{ .Values.COLLABORA_SECCOMP_POLICY }} --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: nextcloud/aio-collabora:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-collabora:20240321_080708-latest
           name: nextcloud-aio-collabora
           ports:
             - containerPort: 9980

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -26,7 +26,11 @@ spec:
     spec:
       initContainers:
         - name: init-subpath
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - mkdir
             - "-p"
@@ -39,7 +43,11 @@ spec:
             - name: nextcloud-aio-database
               mountPath: /nextcloud-aio-database
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chown
             - 999:999
@@ -63,7 +71,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-postgresql:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-postgresql:20240321_080708-latest
           name: nextcloud-aio-database
           ports:
             - containerPort: 5432

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -27,7 +27,11 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -57,7 +61,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: nextcloud/aio-fulltextsearch:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-fulltextsearch:20240321_080708-latest
           name: nextcloud-aio-fulltextsearch
           ports:
             - containerPort: 9200

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -25,9 +25,11 @@ spec:
     spec:
       containers:
         - env:
+            - name: IMAGINARY_SECRET
+              value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-imaginary:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-imaginary:20240321_080708-latest
           name: nextcloud-aio-imaginary
           ports:
             - containerPort: 9000

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -26,7 +26,11 @@ spec:
     spec:
       initContainers:
         - name: "delete-lost-found"
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - rm
             - "-rf"
@@ -37,7 +41,11 @@ spec:
             - name: nextcloud-aio-nextcloud
               mountPath: /nextcloud-aio-nextcloud
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -104,6 +112,8 @@ spec:
               value: "{{ .Values.IMAGINARY_ENABLED }}"
             - name: IMAGINARY_HOST
               value: nextcloud-aio-imaginary
+            - name: IMAGINARY_SECRET
+              value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: INSTALL_LATEST_MAJOR
               value: "{{ .Values.INSTALL_LATEST_MAJOR }}"
             - name: NC_DOMAIN
@@ -160,7 +170,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: UPDATE_NEXTCLOUD_APPS
               value: "{{ .Values.UPDATE_NEXTCLOUD_APPS }}"
-          image: nextcloud/aio-nextcloud:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-nextcloud:20240321_080708-latest
           name: nextcloud-aio-nextcloud
           ports:
             - containerPort: 9000

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -26,7 +26,11 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -52,7 +56,7 @@ spec:
               value: nextcloud-aio-redis
             - name: REDIS_HOST_PASSWORD
               value: "{{ .Values.REDIS_PASSWORD }}"
-          image: nextcloud/aio-notify-push:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-notify-push:20240321_080708-latest
           name: nextcloud-aio-notify-push
           ports:
             - containerPort: 7867

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -27,7 +27,11 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -45,7 +49,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-onlyoffice:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-onlyoffice:20240321_080708-latest
           name: nextcloud-aio-onlyoffice
           ports:
             - containerPort: 80

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -26,7 +26,11 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -40,7 +44,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-redis:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-redis:20240321_080708-latest
           name: nextcloud-aio-redis
           ports:
             - containerPort: 6379

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -37,7 +37,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-talk:20240321_080708-latest
           name: nextcloud-aio-talk
           ports:
             - containerPort: {{ .Values.TALK_PORT }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -33,7 +33,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk-recording:20240308_092935-latest
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/aio-talk-recording:20240321_080708-latest
           name: nextcloud-aio-talk-recording
           ports:
             - containerPort: 1234

nextcloud-aio-helm-chart/update-helm.sh

@@ -59,7 +59,11 @@ find ./ -name '*networkpolicy.yaml' -exec sed -i "s|manual-install-nextcloud-aio
 cat << EOL > /tmp/initcontainers
       initContainers:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -68,14 +72,22 @@ EOL
 cat << EOL > /tmp/initcontainers.database
       initContainers:
         - name: init-subpath
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - mkdir
             - "-p"
             - /nextcloud-aio-database/data
           volumeMountsInitContainer:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chown
             - 999:999
@@ -85,14 +97,22 @@ EOL
 cat << EOL > /tmp/initcontainers.clamav
       initContainers:
         - name: init-subpath
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - mkdir
             - "-p"
             - /nextcloud-aio-clamav/data
           volumeMountsInitContainer:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chown
             - 100:100
@@ -102,14 +122,22 @@ EOL
 cat << EOL > /tmp/initcontainers.nextcloud
       initContainers:
         - name: "delete-lost-found"
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - rm
             - "-rf"
             - "/nextcloud-aio-nextcloud/lost+found"
           volumeMountsInitRmLostFound:
         - name: init-volumes
+          {{- if or .Values.IMAGE_MIRROR_PREFIX .Values.ALPINE_IMAGE_ORG }}
+          image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.ALPINE_IMAGE_ORG}}/alpine"
+          {{- else }}
           image: alpine
+          {{- end }}
           command:
             - chmod
             - "777"
@@ -272,6 +300,8 @@ EOL
 # shellcheck disable=SC1083
 find ./ -name '*apache-deployment.yaml' -exec sed -i "/^.*\- env:/r /tmp/additional-apache.config"  \{} \;
 
+# shellcheck disable=SC1083
+find ./ -name '*deployment.yaml' -exec sed -i 's|image: nextcloud/|image: "{{ .Values.IMAGE_MIRROR_PREFIX }}{{ .Values.NEXTCLOUD_IMAGE_ORG }}"/|' \{} \; 
 
 cd ../
 mkdir -p ../helm-chart/
@@ -326,6 +356,10 @@ SMTP_NAME:         # (empty by default): The username for the authentication.
 SMTP_PASSWORD:         # (empty by default): The password for the authentication.
 MAIL_FROM_ADDRESS:         # (not set by default): Set the local-part for the 'from' field in the emails sent by Nextcloud.
 MAIL_DOMAIN:         # (not set by default): Set a different domain for the emails than the domain where Nextcloud is installed.
+
+IMAGE_MIRROR_PREFIX:          # Setting this allows you to pull Nextcloud images through a mirror registry.
+NEXTCLOUD_IMAGE_ORG: nextcloud          # Setting this allows you to change the image's org name in case a different image needs to be used e.g. for compliance reasons.
+ALPINE_IMAGE_ORG:          # Setting this allows you to change the image's org name in case a different image needs to be used e.g. for compliance reasons.
 ADDITIONAL_CONFIG
 
 mv /tmp/sample.conf ../helm-chart/values.yaml

nextcloud-aio-helm-chart/values.yaml

@@ -1,5 +1,6 @@
 DATABASE_PASSWORD:           # TODO! This needs to be a unique and good password!
 FULLTEXTSEARCH_PASSWORD:           # TODO! This needs to be a unique and good password!
+IMAGINARY_SECRET:           # TODO! This needs to be a unique and good password!
 NC_DOMAIN: yourdomain.com          # TODO! Needs to be changed to the domain that you want to use for Nextcloud.
 NEXTCLOUD_PASSWORD:           # TODO! This is the password of the initially created Nextcloud admin with username admin.
 ONLYOFFICE_SECRET:           # TODO! This needs to be a unique and good password!
@@ -60,3 +61,7 @@ SMTP_NAME:         # (empty by default): The username for the authentication.
 SMTP_PASSWORD:         # (empty by default): The password for the authentication.
 MAIL_FROM_ADDRESS:         # (not set by default): Set the local-part for the 'from' field in the emails sent by Nextcloud.
 MAIL_DOMAIN:         # (not set by default): Set a different domain for the emails than the domain where Nextcloud is installed.
+
+IMAGE_MIRROR_PREFIX:          # Setting this allows you to pull Nextcloud images through a mirror registry.
+NEXTCLOUD_IMAGE_ORG: nextcloud          # Setting this allows you to change the image's org name in case a different image needs to be used e.g. for compliance reasons.
+ALPINE_IMAGE_ORG:          # Setting this allows you to change the image's org name in case a different image needs to be used e.g. for compliance reasons.

readme.md

@@ -119,7 +119,8 @@ The following instructions are meant for installations without a web server or r
     Note: You may be interested in adjusting Nextcloud’s datadir to store the files in a different location than the default docker volume. See [this documentation](https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir) on how to do it.
 
 3. After the initial startup, you should be able to open the Nextcloud AIO Interface now on port 8080 of this server.<br>
-E.g. `https://ip.address.of.this.server:8080`<br><br>
+E.g. `https://ip.address.of.this.server:8080`<br>
+⚠️ **Important:** do always use an ip-address if you access this port and not a domain as HSTS might block access to it later! (It is also expected that this port uses a self-signed certificate due to security concerns which you need to accept in your browser)<br><br>
 If your firewall/router has port 80 and 8443 open/forwarded and you point a domain to your server, you can get a valid certificate automatically by opening the Nextcloud AIO Interface via:<br>
 `https://your-domain-that-points-to-this-server.tld:8443`
 4. Please do not forget to open port `3478/TCP` and `3478/UDP` in your firewall/router for the Talk container!
@@ -143,7 +144,7 @@ Only those (if you access the Mastercontainer Interface internally via port 8080
 - `3478/TCP` and `3478/UDP` for the Talk container
 
 ### Explanation of used ports:
-- `8080/TCP`: Mastercontainer Interface with self-signed certificate (works always, also if only access via IP-address is possible, e.g. `https://ip.address.of.this.server:8080/`)
+- `8080/TCP`: Mastercontainer Interface with self-signed certificate (works always, also if only access via IP-address is possible, e.g. `https://ip.address.of.this.server:8080/`) ⚠️ **Important:** do always use an ip-address if you access this port and not a domain as HSTS might block access to it later! (It is also expected that this port uses a self-signed certificate due to security concerns which you need to accept in your browser)
 - `80/TCP`: redirects to Nextcloud (is used for getting the certificate via ACME http-challenge for the Mastercontainer)
 - `8443/TCP`: Mastercontainer Interface with valid certificate (only works if port 80 and 8443 are open/forwarded in your firewall/router and you point a domain to your server. It generates a valid certificate then automatically and access via e.g. `https://public.domain.com:8443/` is possible.)
 - `443/TCP`: will be used by the Apache container later on and needs to be open/forwarded in your firewall/router
@@ -386,6 +387,7 @@ Not directly but you have multiple options to achieve this:
 - Mount a network FS like SSHFS, SMB or NFS in the directory that you enter in AIO as backup directory
 - Use rsync or rclone for syncing the borg backup archive that AIO creates locally to a remote target (make sure to lock the backup archive correctly before starting the sync; search for "aio-lockfile"; you can find a local example script here: https://github.com/nextcloud/all-in-one#sync-the-backup-regularly-to-another-drive)
 - You can find a well written guide that uses rclone and e.g. BorgBase for remote backups here: https://github.com/nextcloud/all-in-one/discussions/2247
+- Here is another one that utilizes borgmatic and BorgBase for remote backups: https://github.com/nextcloud/all-in-one/discussions/4391
 - create your own backup solution using a script and borg, borgmatic or any other to backup tool for backing up to a remote target (make sure to stop and start the AIO containers correctly following https://github.com/nextcloud/all-in-one#how-to-enable-automatic-updates-without-creating-a-backup-beforehand)
 
 ---

reverse-proxy.md

@@ -699,7 +699,9 @@ Simply translate the docker run command into a docker-compose file. You can have
 Use this environment variable during the initial startup of the mastercontainer to make the apache container only listen on localhost: `--env APACHE_IP_BINDING=127.0.0.1`. **Attention:** This is only recommended to be set if you use `localhost` in your reverse proxy config to connect to your AIO instance. If you use an ip-address instead of localhost, you should set it to `0.0.0.0`.
 
 ## 4. Open the AIO interface.
-After starting AIO, you should be able to access the AIO Interface via `https://ip.address.of.the.host:8080`. Enter your domain that you've entered in the reverse proxy config and you should be done. Please do not forget to open/forward port `3478/TCP` and `3478/UDP` in your firewall/router for the Talk container!
+After starting AIO, you should be able to access the AIO Interface via `https://ip.address.of.the.host:8080`.<br>
+⚠️ **Important:** do always use an ip-address if you access this port and not a domain as HSTS might block access to it later! (It is also expected that this port uses a self-signed certificate due to security concerns which you need to accept in your browser)<br>
+Enter your domain in the AIO interface that you've used in the reverse proxy config and you should be done. Please do not forget to open/forward port `3478/TCP` and `3478/UDP` in your firewall/router for the Talk container!
 
 ## 5. Optional: get a valid certificate for the AIO interface