Currently the README section that describes how to change the custom
skeleton directory does not explain why an administrator may wish to
do this. This addition to the documentation provides context: a custom
skeleton directory is created to change the default files and folders
that ship with Nextcloud.
Signed-off-by: J Hackman <gene@preciouschicken.com>
Just a very little typo that confused me while I was reading documentation yesterday. I assume this was what the title wanted to convey?
Signed-off-by: Aytsuqi <141279848+Aytsuqi@users.noreply.github.com>
Allow to get local ip-address of database container which allows to talk to it even in host mode (the container that requires this needs to be started first then)
Signed-off-by: Simon L <szaimen@e.mail.de>
Add information about synchronizing after migration. There maybe issues if the server has been offline for a while and a user reconnects clients for synchronization.
Signed-off-by: Lance <Gero3977@gmail.com>
echo"The database initialization failed. Most likely was a wrong timezone selected."
echo"The selected timezone is '$TZ'."
echo"Please check if it is in 'TZ database name' column of the timezone list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List"
echo"Please check if it is in the 'TZ identifier' column of the timezone list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List"
echo"For further clues on what went wrong, look at the logs above."
echo"You might start again from scratch by following https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance and selecting a proper timezone."
sed -i "s|^max_connections =.*|max_connections = $MAX_CONNECTIONS|""/var/lib/postgresql/data/postgresql.conf"
fi
echo"Setting postgres values..."
# Modify conf
# Sync this with max pm.max_children and MaxRequestWorkers
# 5000 connections is apparently the highest possible value with postgres so set it to that so that we don't run into a limit here.
# We don't actually expect so many connections but don't want to limit it artificially because people will report issues otherwise
# Also connections should usually be closed again after the process is done
# If we should actually exceed this limit, it is definitely a bug in Nextcloud server or some of its apps that does not close connections correctly and not a bug in AIO
sed -i "s|^max_connections =.*|max_connections = 5000|""/var/lib/postgresql/data/postgresql.conf"
# Do not log checkpoints
if grep -q "#log_checkpoints" /var/lib/postgresql/data/postgresql.conf;then
sed -i 's|#log_checkpoints.*|log_checkpoints = off|' /var/lib/postgresql/data/postgresql.conf
fi
# Closing idling connections automatically seems to break any logic so was reverted again to default where it is disabled
if grep -q "^idle_session_timeout" /var/lib/postgresql/data/postgresql.conf;then
sed -i 's|^idle_session_timeout.*|#idle_session_timeout|' /var/lib/postgresql/data/postgresql.conf
fi
fi
do_database_dump(){
set -x
rm -f "$DUMP_FILE.temp"
touch "$DUMP_DIR/export.failed"
if pg_dump --username "$POSTGRES_USER""$POSTGRES_DB" > "$DUMP_FILE.temp";then
rm -f "$DUMP_FILE"
mv "$DUMP_FILE.temp""$DUMP_FILE"
pg_ctl stop -m fast
rm "$DUMP_DIR/export.failed"
echo'Database dump successful!'
set +x
exit0
else
pg_ctl stop -m fast
echo"Database dump unsuccessful!"
set +x
exit1
fi
}
# Catch docker stop attempts
trap'true' SIGINT SIGTERM
trapdo_database_dump SIGINT SIGTERM
# Start the database
exec docker-entrypoint.sh postgres &
wait$!
# Continue with shutdown procedure: do database dump, etc.
rm -f "$DUMP_FILE.temp"
touch "$DUMP_DIR/export.failed"
if pg_dump --username "$POSTGRES_USER""$POSTGRES_DB" > "$DUMP_FILE.temp";then
This container bundles caddy and auto-configures it for you. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden by listening on `bw.$NC_DOMAIN`, if installed.
This container bundles caddy and auto-configures it for you. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden by listening on `bw.$NC_DOMAIN`, if installed. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart by listening on `mail.$NC_DOMAIN`, if installed.
### Notes
- This container is incompatible with the [npmplus](https://github.com/nextcloud/all-in-one/tree/main/community-containers/npmplus) community container. So make sure that you do not enable both at the same time!
- Make sure that no other service is using port 443 on your host as otherwise the containers will fail to start. You can check this with `sudo netstat -tulpn | grep 443` before installing AIO.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden, make sure that you point `bw.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for vaultwarden.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart, make sure that you point `mail.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for stalwart.
- After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
This container bundles DLNA server for your Nextcloud files to be accessible by the clients in your local network. Simply run the container and look for a new media server `nextcloud-aio` in your local network.
### Notes
- This container will work only if the Nextcloud installation is in your home network, it is not suitable for installations on remote servers.
- This is not working with Docker Desktop since it requires the `host` networking mode in docker, and it doesn't really share the host's network interfaces in this system
- If you have a firewall like ufw configured, you might need to open at least port 9999 TCP and 1900 UDP first in order to make it work.
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
This container bundles the external model of facerecognition and auto-configures it for you.
### Notes
- This container needs imaginary in order to analyze modern file format images. Make sure to enable imaginary in the AIO interface before adding this container.
- Facerecognition is by default disabled for all users, if you want to enable facerecognition for all users, you can run the following before adding this container:
- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
This container bundles LibreTranslate and auto-configures it for you.
### Notes
- Please note that this community container is currently not working since its integration app is not yet compatible with Nextcloud 27 (Hub 6). You can follow the progress here: https://github.com/v1r0x/integration_libretranslate/issues/1
- After the initial startup is done, you might want to change the default language to translate from and to via:
```bash
# Adjust the values `en` and `de` in commands below accordingly
This container bundles the hardware-transcoding container of memories and auto-configures it for you.
### Notes
- In order to actually enable the hardware transcoding, you need to add the following flag to AIO apart from adding this container: https://github.com/nextcloud/all-in-one#how-to-enable-hardware-transcoding-for-nextcloud
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -6,7 +6,7 @@ This container bundles pi-hole and auto-configures it for you.
- Make sure that no dns server is already running by checking with `sudo netstat -tulpn | grep 53`. Otherwise the container will not be able to start!
- The DHCP functionality of Pi-hole has been disabled!
- The data of pi-hole will be automatically included in AIOs backup solution!
- After adding and starting the container, you can visit `http://ip.address.of.this.server:8573` in order to log in with the admin key that you can retrieve when running `sudo docker inspect nextcloud-aio-pihole | grep WEBPASSWORD`. There you can configure the pi-hole setup. Also you can add local dns records.
- After adding and starting the container, you can visit `http://ip.address.of.this.server:8573/admin` in order to log in with the admin key that you can retrieve when running `sudo docker inspect nextcloud-aio-pihole | grep WEBPASSWORD`. There you can configure the pi-hole setup. Also you can add local dns records.
- You can configure your home network now to use pi-hole as its dns server by configuring your router.
- Additionally, you can configure the docker daemon to use that by editing `/etc/docker/daemon.json` and adding ` { "dns" : [ "ip.address.of.this.server" , "8.8.8.8" ] } `.
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -5,7 +5,7 @@ This container bundles Plex and auto-configures it for you.
- This is not working on arm64 since Plex does only provide x64 docker images.
- This is not working on Docker Desktop since it needs `network_mode: host` in order to work correctly.
- If you have a firewall like ufw configured, you might need to open all Plex ports in there first in order to make it work. Especially port 32400 is important!
- After adding and starting the container, you need to visit http://ip.address.of.server:32400 in order to claim your server with a plex account
- After adding and starting the container, you need to visit http://ip.address.of.server:32400/manage in order to claim your server with a plex account
- The data of Plex will be automatically included in AIOs backup solution!
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -16,3 +16,10 @@ Simply submit a PR by creating a new folder in this directory: https://github.co
### Is there a list of ideas for new community containers?
Yes, see [this list](https://github.com/nextcloud/all-in-one/discussions/categories/ideas?discussions_q=is%3Aopen+category%3AIdeas+label%3A%22help+wanted%22) for already existing ideas for new community containers. Feel free to pick one up and add it to this folder by following the instructions above.
## How to remove containers from AIOs stack?
In some cases, you might want to remove some community containers from the AIO stack again. Here is how to do this.
First, do a backup from the AIO interface in order to save the current state. Do not start the containers again afterwards! Now simply recreate the mastercontainer and remove any container from the `--env AIO_COMMUNITY_CONTAINERS="container1 container2"` that you do not actually need. If you want to remove all, simply use `--env AIO_COMMUNITY_CONTAINERS=" "`.
After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`).
This container bundles stalwart mail server and auto-configures it for you.
### Notes
- This is only intended to run on a VPS with static ip-address.
- Check with `sudo netstat -tulpn` that no other service is using port 25, 143, 465, 587, 993 nor 4190 yet as otherwise the container will fail to start.
- You need to configure a reverse proxy in order to run this container since stalwart needs a dedicated (sub)domain! For that, you might have a look at https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy.
- Currently, only `mail.$NC_DOMAIN` is supported as subdomain! So if Nextcloud is using `your-domain.com`, Stalwart will use `mail.your-domain.com`.
- The data of Stalwart will be automatically included in AIOs backup solution!
- After adding and starting the container, you need to run `sudo docker exec -it nextcloud-aio-stalwart configure.sh` and follow https://stalw.art/docs/install/docker/#choose-where-to-store-your-data (1. choose `Local disk using Maildir`, 2. choose `No, create a new directory for me` (or select LDAP if you have an LDAP server), 3. type in your `$NC_DOMAIN` as `domain name` and `mail.$NC_DOMAIN` as `server hostname`. 4. add `DKIM, SPF and DMARC` as advised to your DNS config, 5. Take note of the administrator credentials, 6. Now the config script should exit and automatically restart the container and enable your config.
- See https://stalw.art/docs/directory/types/memory/ how you can easily create new user accounts. (Alternatively see https://stalw.art/docs/directory/types/ldap if you have an LDAP server). You can edit the config file with `sudo docker exec -it nextcloud-aio-stalwart vi /opt/stalwart-mail/etc/config.toml`. Also, you might want to enable logging to stdout so that you can see the stalwart logs in your container logs via `sudo docker exec -it nextcloud-aio-stalwart vi /opt/stalwart-mail/etc/common/tracing.toml` (you need to restart the container afterwards with `sudo docker restart nextcloud-aio-stalwart` in order to apply the settings).
- Afterwards, you can visit the basic admin settings in `https://your-nc-domain.com/settings/admin` and add the your mail server for outgoing mails there.
- Additionally, you might want to install and configure [snappymail](https://apps.nextcloud.com/apps/snappymail) or [mail](https://apps.nextcloud.com/apps/mail) inside Nextcloud in order to use your mail accounts for sending and retrieving mails.
- See https://stalw.art/docs/faq for further faq and docs on the project
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
**Please note:** Due to a bug in Collabora is the Collabora container currently in rootless mode not working. See https://github.com/CollaboraOnline/online/issues/2800. In that case, you need to run a separate Collabora instance on your own if you want to use this feature. The following flag will be useful https://github.com/nextcloud/all-in-one#how-to-keep-disabled-apps.
You can run AIO with docker rootless by following the steps below.
0. If docker is already installed, you should consider disabling it first: (`sudo systemctl disable --now docker.service docker.socket`)
@@ -18,6 +18,7 @@ The procedure for migrating only the files works like this:
1. Next, run `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chown -R 33:0 /mnt/ncdata/` and `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chmod -R 750 /mnt/ncdata/` to apply the correct permissions. (Or if `NEXTCLOUD_DATADIR` was provided, apply `chown -R 33:0` and `chmod -R 750` to the chosen path.)
1. Start the containers again and wait until all containers are running
1. Run `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan-app-data && sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan --all` in order to scan all files in the datadirectory.
1. If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
## Migrate the files and the database
**Please note**: this is much more complicated than migrating only the files and also not as failproof so be warned! Also, this will not work on former snap installations as the snap is read-only and thus you cannot install the necessary `pdo_pgsql` PHP extension. So if migrating from snap, you will need to use one of the other methods. However you could try to ask if the snaps maintainer could add this one small PHP extension to the snap here: https://github.com/nextcloud-snap/nextcloud-snap/issues which would allow for an easy migration.
@@ -84,5 +85,21 @@ The procedure for migrating the files and the database works like this:
Now the whole Nextcloud instance should work again.<br>
If not, feel free to restore the AIO instance from backup and start at step 8 again.
If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
## Use the user_migration app
A new way since the Nextcloud update to 24 is to use the new [user_migration app](https://apps.nextcloud.com/apps/user_migration#app-gallery). It allows to export the most important data on one instance and import it on a different Nextcloud instance. For that, you need to install and enable the user_migration app on your old instance, trigger the export for the user, create the user on the new instance, log in with that user and import the archive that was created during the export. This then needs to be done for each user that you want to migrate.
If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
# Synchronising with clients after migration
#### From https://docs.nextcloud.com/server/latest/admin_manual/maintenance/restore.html#synchronising-with-clients-after-data-recovery
By default the Nextcloud server is considered the authoritative source for the data. If the data on the server and the client differs clients will default to fetching the data from the server.
If the recovered backup is outdated the state of the clients may be more up to date than the state of the server. In this case also make sure to run `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ maintenance:data-fingerprint` command afterwards. It changes the logic of the synchronisation algorithm to try an recover as much data as possible. Files missing on the server are therefore recovered from the clients and in case of different content the users will be asked.
>[!Note]
>The usage of maintenance:data-fingerprint can cause conflict dialogues and difficulties deleting files on the client. Therefore it’s only recommended to prevent dataloss if the backup was outdated.
If you are running multiple application servers you will need to make sure the config files are synced between them so that the updated data-fingerprint is applied on all instances.
find ./ -name '*nextcloud-deployment.yaml' -exec sed -i "/^.*\- env:/r /tmp/additional.config"\{}\;
# Additional config
cat << EOL > /tmp/additional-apache.config
- name: ADDITIONAL_TRUSTED_DOMAIN
value: "{{ .Values.ADDITIONAL_TRUSTED_DOMAIN }}"
EOL
# shellcheck disable=SC1083
find ./ -name '*apache-deployment.yaml' -exec sed -i "/^.*\- env:/r /tmp/additional-apache.config"\{}\;
cd ../
mkdir -p ../helm-chart/
rm latest/Chart.yaml
@@ -210,14 +300,34 @@ sed -i '/_ENABLED.*/s/ no / "no" /' /tmp/sample.conf
sed -i 's|^NEXTCLOUD_TRUSTED_CACERTS_DIR: .*|NEXTCLOUD_TRUSTED_CACERTS_DIR: # Setting this to any value allows to automatically import root certificates into the Nextcloud container|' /tmp/sample.conf
sed -i 's|10737418240|"10737418240"|' /tmp/sample.conf
# shellcheck disable=SC2129
echo"NAMESPACE: default # By changing this, you can adjust the namespace of the installation which allows to install multiple instances on one kubernetes cluster" >> /tmp/sample.conf
# shellcheck disable=SC2129
echo"" >> /tmp/sample.conf
# shellcheck disable=SC2129
echo'STORAGE_CLASS: # By setting this, you can adjust the storage class for your volumes' >> /tmp/sample.conf
for variable in "${VOLUME_VARIABLE[@]}";do
echo"$variable: 1Gi # You can change the size of the $(echo"$variable"| sed 's|_STORAGE_SIZE||;s|_|-|g'| tr '[:upper:]''[:lower:]') volume that default to 1Gi with this value" >> /tmp/sample.conf
done
sed -i "s|NEXTCLOUD_STORAGE_SIZE: 1Gi|NEXTCLOUD_STORAGE_SIZE: 5Gi|" /tmp/sample.conf
sed -i "s|NEXTCLOUD_DATA_STORAGE_SIZE: 1Gi|NEXTCLOUD_DATA_STORAGE_SIZE: 5Gi|" /tmp/sample.conf
# Additional config
cat << ADDITIONAL_CONFIG >> /tmp/sample.conf
NAMESPACE: default # By changing this, you can adjust the namespace of the installation which allows to install multiple instances on one kubernetes cluster
SUBSCRIPTION_KEY: # This allows to set the Nextcloud Enterprise key via ENV
SERVERINFO_TOKEN: # This allows to set the serverinfo app token for monitoring your Nextcloud via the serverinfo app
APPS_ALLOWLIST: # This allows to configure allowed apps that will be shown in Nextcloud's Appstore. You need to enter the app-IDs of the apps here and separate them with spaces. E.g. 'files richdocuments'
ADDITIONAL_TRUSTED_PROXY: # Allows to add one additional ip-address to Nextcloud's trusted proxies and to the Office WOPI-allowlist automatically. Set it e.g. like this: 'your.public.ip-address'. You can also use an ip-range here.
ADDITIONAL_TRUSTED_DOMAIN: # Allows to add one domain to Nextcloud's trusted domains and also generates a certificate automatically for it
SMTP_HOST: # (empty by default): The hostname of the SMTP server.
SMTP_SECURE: # (empty by default): Set to 'ssl' to use SSL, or 'tls' to use STARTTLS.
SMTP_PORT: # (default: '465' for SSL and '25' for non-secure connections): Optional port for the SMTP connection. Use '587' for an alternative port for STARTTLS.
SMTP_AUTHTYPE: # (default: 'LOGIN'): The method used for authentication. Use 'PLAIN' if no authentication or STARTLS is required.
SMTP_NAME: # (empty by default): The username for the authentication.
SMTP_PASSWORD: # (empty by default): The password for the authentication.
MAIL_FROM_ADDRESS: # (not set by default): Set the local-part for the 'from' field in the emails sent by Nextcloud.
MAIL_DOMAIN: # (not set by default): Set a different domain for the emails than the domain where Nextcloud is installed.
@@ -33,7 +33,6 @@ NEXTCLOUD_UPLOAD_LIMIT: 10G # This allows to change the upload limit of
REMOVE_DISABLED_APPS:yes# Setting this to no keep Nextcloud apps that are disabled via their switch and not uninstall them if they should be installed in Nextcloud.
TALK_PORT:3478# This allows to adjust the port that the talk container is using.
UPDATE_NEXTCLOUD_APPS:no# When setting to yes (with quotes), it will automatically update all installed Nextcloud apps upon container startup on saturdays.
NAMESPACE:default # By changing this, you can adjust the namespace of the installation which allows to install multiple instances on one kubernetes cluster
STORAGE_CLASS:# By setting this, you can adjust the storage class for your volumes
APACHE_STORAGE_SIZE:1Gi # You can change the size of the apache volume that default to 1Gi with this value
@@ -41,8 +40,23 @@ CLAMAV_STORAGE_SIZE: 1Gi # You can change the size of the clamav volume th
DATABASE_STORAGE_SIZE:1Gi # You can change the size of the database volume that default to 1Gi with this value
DATABASE_DUMP_STORAGE_SIZE:1Gi # You can change the size of the database-dump volume that default to 1Gi with this value
ELASTICSEARCH_STORAGE_SIZE:1Gi # You can change the size of the elasticsearch volume that default to 1Gi with this value
NEXTCLOUD_STORAGE_SIZE:1Gi # You can change the size of the nextcloud volume that default to 1Gi with this value
NEXTCLOUD_DATA_STORAGE_SIZE:1Gi # You can change the size of the nextcloud-data volume that default to 1Gi with this value
NEXTCLOUD_STORAGE_SIZE:5Gi # You can change the size of the nextcloud volume that default to 1Gi with this value
NEXTCLOUD_DATA_STORAGE_SIZE:5Gi # You can change the size of the nextcloud-data volume that default to 1Gi with this value
NEXTCLOUD_TRUSTED_CACERTS_STORAGE_SIZE:1Gi # You can change the size of the nextcloud-trusted-cacerts volume that default to 1Gi with this value
ONLYOFFICE_STORAGE_SIZE:1Gi # You can change the size of the onlyoffice volume that default to 1Gi with this value
REDIS_STORAGE_SIZE:1Gi # You can change the size of the redis volume that default to 1Gi with this value
NAMESPACE:default # By changing this, you can adjust the namespace of the installation which allows to install multiple instances on one kubernetes cluster
SUBSCRIPTION_KEY:# This allows to set the Nextcloud Enterprise key via ENV
SERVERINFO_TOKEN:# This allows to set the serverinfo app token for monitoring your Nextcloud via the serverinfo app
APPS_ALLOWLIST:# This allows to configure allowed apps that will be shown in Nextcloud's Appstore. You need to enter the app-IDs of the apps here and separate them with spaces. E.g. 'files richdocuments'
ADDITIONAL_TRUSTED_PROXY: # Allows to add one additional ip-address to Nextcloud's trusted proxies and to the Office WOPI-allowlist automatically. Set it e.g. like this:'your.public.ip-address'. You can also use an ip-range here.
ADDITIONAL_TRUSTED_DOMAIN:# Allows to add one domain to Nextcloud's trusted domains and also generates a certificate automatically for it
SMTP_HOST: # (empty by default):The hostname of the SMTP server.
SMTP_SECURE: # (empty by default):Set to 'ssl' to use SSL, or 'tls' to use STARTTLS.
SMTP_PORT: # (default: '465' for SSL and '25' for non-secure connections):Optional port for the SMTP connection. Use '587' for an alternative port for STARTTLS.
SMTP_AUTHTYPE: # (default: 'LOGIN'):The method used for authentication. Use 'PLAIN' if no authentication or STARTLS is required.
SMTP_NAME: # (empty by default):The username for the authentication.
SMTP_PASSWORD: # (empty by default):The password for the authentication.
MAIL_FROM_ADDRESS: # (not set by default):Set the local-part for the 'from' field in the emails sent by Nextcloud.
MAIL_DOMAIN: # (not set by default):Set a different domain for the emails than the domain where Nextcloud is installed.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
