increase to 7.6.0

Signed-off-by: Simon L <szaimen@e.mail.de>

.github/workflows/lint-helm.yml

@@ -21,7 +21,7 @@ jobs:
           version: v3.11.1
 
       - name: Set up chart-testing
-        uses: helm/chart-testing-action@v2.4.0
+        uses: helm/chart-testing-action@v2.6.0
 
       - name: Run chart-testing (lint)
         id: lint

Containers/borgbackup/backupscript.sh

@@ -72,10 +72,10 @@ if [ "$BORG_MODE" = backup ]; then
         exit 1
     fi
 
-    # Test that nothing is empty
-    for directory in "${VOLUME_DIRS[@]}"; do
-        if [ -z "$(ls -A "$directory")" ] && [ "$directory" != "/nextcloud_aio_volumes/nextcloud_aio_elasticsearch" ]; then
-            echo "$directory is empty which is not allowed."
+    # Test that default volumes are not empty
+    for volume in "${DEFAULT_VOLUMES[@]}"; do
+        if [ -z "$(ls -A "/nextcloud_aio_volumes/$volume")" ] && [ "$volume" != "nextcloud_aio_elasticsearch" ]; then
+            echo "/nextcloud_aio_volumes/$volume is empty which should not happen!"
             exit 1
         fi
     done

Containers/clamav/Dockerfile

@@ -1,5 +1,5 @@
 # Probably from this file: https://github.com/Cisco-Talos/clamav-docker/blob/main/clamav/1.1/alpine/Dockerfile
-FROM clamav/clamav:1.2.0-9
+FROM clamav/clamav:1.2.1-12
 
 COPY clamav.conf /tmp/clamav.conf
 

Containers/collabora/Dockerfile

@@ -1,5 +1,5 @@
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/tree/master/docker
-FROM collabora/code:23.05.5.1.1
+FROM collabora/code:23.05.5.3.1
 
 USER root
 

Containers/imaginary/Dockerfile

@@ -1,6 +1,6 @@
 FROM golang:1.21.3-alpine3.18 as go
 
-ENV IMAGINARY_HASH b632dae8cc321452c3f85bcae79c580b1ae1ed84
+ENV IMAGINARY_HASH 7efb66c243056e5b3b65215e101be7915983e364
 
 RUN set -ex; \
     apk add --no-cache \

Containers/mastercontainer/Dockerfile

@@ -1,11 +1,11 @@
 # Docker CLI is a requirement
-FROM docker:24.0.6-cli as docker
+FROM docker:24.0.7-cli as docker
 
 # Caddy is a requirement
 FROM caddy:2.7.5-alpine as caddy
 
 # From https://github.com/docker-library/php/blob/master/8.2/alpine3.18/fpm/Dockerfile
-FROM php:8.2.11-fpm-alpine3.18
+FROM php:8.2.12-fpm-alpine3.18
 
 EXPOSE 80
 EXPOSE 8080

Containers/nextcloud/Dockerfile

@@ -1,9 +1,9 @@
-FROM php:8.1.24-fpm-alpine3.18
+FROM php:8.1.25-fpm-alpine3.18
 
 ENV PHP_MEMORY_LIMIT 512M
 ENV PHP_UPLOAD_LIMIT 10G
 ENV PHP_MAX_TIME 3600
-ENV NEXTCLOUD_VERSION 27.1.2
+ENV NEXTCLOUD_VERSION 27.1.3
 ENV AIO_TOKEN 123456
 ENV AIO_URL localhost
 
@@ -70,7 +70,7 @@ RUN set -ex; \
 # pecl will claim success even if one install fails, so we need to perform each install separately
     pecl install APCu-5.1.22; \
     pecl install memcached-3.2.0; \
-    pecl install redis-6.0.1; \
+    pecl install redis-6.0.2; \
     pecl install imagick-3.7.0; \
     \
     docker-php-ext-enable \

Containers/nextcloud/entrypoint.sh

@@ -33,8 +33,13 @@ REDIS_CONF
 echo "Setting php max children..."
 MEMORY=$(awk '/MemTotal/ {printf "%d", $2/1024}' /proc/meminfo)
 PHP_MAX_CHILDREN=$((MEMORY/50))
+# 100 is the default, we do not want to go lower than this
+if [ "$PHP_MAX_CHILDREN" -lt 100 ]; then
+    PHP_MAX_CHILDREN=100
+fi
 if [ -n "$PHP_MAX_CHILDREN" ]; then
     sed -i "s/^pm.max_children =.*/pm.max_children = $PHP_MAX_CHILDREN/" /usr/local/etc/php-fpm.d/www.conf
+    sed -i "s/^;pm.process_idle_timeout =.*/pm.process_idle_timeout = 3s/" /usr/local/etc/php-fpm.d/www.conf
 fi
 
 # Check permissions in ncdata

Containers/postgresql/start.sh

@@ -31,7 +31,7 @@ fi
 if [ -f "$DUMP_DIR/initialization.failed" ]; then
     echo "The database initialization failed. Most likely was a wrong timezone selected."
     echo "The selected timezone is '$TZ'." 
-    echo "Please check if it is in 'TZ database name' column of the timezone list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List"
+    echo "Please check if it is in the 'TZ identifier' column of the timezone list: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List"
     echo "For further clues on what went wrong, look at the logs above."
     echo "You might start again from scratch by following https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance and selecting a proper timezone."
     exit 1
@@ -152,13 +152,21 @@ if [ -f "/var/lib/postgresql/data/postgresql.conf" ]; then
     MEMORY=$(awk '/MemTotal/ {printf "%d", $2/1024}' /proc/meminfo)
     MAX_CONNECTIONS=$((MEMORY/50+3))
     if [ -n "$MAX_CONNECTIONS" ]; then
+        # 100 is the default, we do not want to go lower than this
+        if [ "$MAX_CONNECTIONS" -lt 100 ]; then
+            MAX_CONNECTIONS=100
+        fi
         sed -i "s|^max_connections =.*|max_connections = $MAX_CONNECTIONS|" "/var/lib/postgresql/data/postgresql.conf"
     fi
 
-    # Modify conf
+    # Do not log checkpoints
     if grep -q "#log_checkpoints" /var/lib/postgresql/data/postgresql.conf; then
         sed -i 's|#log_checkpoints.*|log_checkpoints = off|' /var/lib/postgresql/data/postgresql.conf
     fi
+    # Close idling connections automatically after 3s which does not seem to happen automatically so that we run into max_connections limits
+    if grep -q "#idle_session_timeout" /var/lib/postgresql/data/postgresql.conf; then
+        sed -i 's|#idle_session_timeout.*|idle_session_timeout = 3000|' /var/lib/postgresql/data/postgresql.conf
+    fi
 fi
 
 # Catch docker stop attempts

Containers/talk-recording/Dockerfile

@@ -2,7 +2,7 @@ FROM python:3.12.0-alpine3.18
 
 COPY --chmod=775 start.sh /start.sh
 
-ENV RECORDING_VERSION v17.1.1
+ENV RECORDING_VERSION v17.1.2
 ENV ALLOW_ALL false
 ENV HPB_PROTOCOL https
 ENV SKIP_VERIFY false

Containers/talk/Dockerfile

@@ -1,6 +1,6 @@
-FROM nats:2.10.3-scratch as nats
+FROM nats:2.10.4-scratch as nats
 FROM eturnal/eturnal:1.12.0 AS eturnal
-FROM strukturag/nextcloud-spreed-signaling:1.1.3 as signaling
+FROM strukturag/nextcloud-spreed-signaling:1.2.0 as signaling
 FROM alpine:3.18.4 as janus
 
 ARG JANUS_VERSION=v0.14.0

Containers/talk/server.conf.in

@@ -86,9 +86,10 @@ internalsecret = the-shared-secret-for-internal-clients
 # only be used while running the benchmark client against the server.
 allowall = false
 
-# Common shared secret for requests from and to the backend servers if
-# "allowall" is enabled. This must be the same value as configured in the
-# Nextcloud admin ui.
+# Common shared secret for requests from and to the backend servers. Used if
+# "allowall" is enabled or as fallback for individual backends that don't have
+# their own secret set.
+# This must be the same value as configured in the Nextcloud admin ui.
 #secret = the-shared-secret-for-allowall
 
 # Timeout in seconds for requests to the backend.
@@ -109,8 +110,9 @@ connectionsperhost = 8
 # URL of the Nextcloud instance
 #url = https://cloud.domain.invalid
 
-# Shared secret for requests from and to the backend servers. This must be the
-# same value as configured in the Nextcloud admin ui.
+# Shared secret for requests from and to the backend servers. Leave empty to use
+# the common shared secret from above.
+# This must be the same value as configured in the Nextcloud admin ui.
 #secret = the-shared-secret
 
 # Limit the number of sessions that are allowed to connect to this backend.
@@ -129,8 +131,9 @@ connectionsperhost = 8
 # URL of the Nextcloud instance
 #url = https://cloud.otherdomain.invalid
 
-# Shared secret for requests from and to the backend servers. This must be the
-# same value as configured in the Nextcloud admin ui.
+# Shared secret for requests from and to the backend servers. Leave empty to use
+# the common shared secret from above.
+# This must be the same value as configured in the Nextcloud admin ui.
 #secret = the-shared-secret
 
 [nats]

app/lib/Settings/Admin.php

@@ -78,6 +78,6 @@ class Admin implements ISettings {
 	 * E.g.: 70
 	 */
 	public function getPriority(): int {
-		return 5;
+		return 0;
 	}
 }

community-containers/dlna/dlna.json

@@ -0,0 +1,39 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-dlna",
+            "display_name": "DLNA",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/dlna",
+            "image": "thanek/nextcloud-dlna",
+            "image_tag": "latest",
+            "internal_port": "host",
+            "restart": "unless-stopped",
+            "depends_on": [
+                "nextcloud-aio-database"
+            ],
+            "environment": [
+                "NC_DOMAIN=%NC_DOMAIN%",
+                "NC_PORT=443",
+                "NEXTCLOUD_DLNA_SERVER_PORT=9999",
+                "NEXTCLOUD_DLNA_FRIENDLY_NAME=nextcloud-aio",
+                "NEXTCLOUD_DATA_DIR=/data",
+                "NEXTCLOUD_DB_TYPE=postgres",
+                "NEXTCLOUD_DB_HOST=%AIO_DATABASE_HOST%",
+                "NEXTCLOUD_DB_PORT=5432",
+                "NEXTCLOUD_DB_NAME=nextcloud_database",
+                "NEXTCLOUD_DB_USER=oc_nextcloud",
+                "NEXTCLOUD_DB_PASS=%DATABASE_PASSWORD%"
+            ],
+            "secrets": [
+                "DATABASE_PASSWORD"
+            ],
+            "volumes": [
+                {
+                    "source": "%NEXTCLOUD_DATADIR%",
+                    "destination": "/data",
+                    "writeable": false
+                }
+            ]
+        }
+    ]
+}

community-containers/dlna/readme.md

@@ -0,0 +1,15 @@
+## DLNA server
+This container bundles DLNA server for your Nextcloud files to be accessible by the clients in your local network. Simply run the container and look for a new media server `nextcloud-aio` in your local network.
+
+### Notes
+- This container will work only if the Nextcloud installation is in your home network, it is not suitable for installations on remote servers.
+- This is not working with Docker Desktop since it requires the `host` networking mode in docker, and it doesn't really share the host's network interfaces in this system
+- If you have a firewall like ufw configured, you might need to open at least port 9999 TCP and 1900 UDP first in order to make it work.
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/thanek/nextcloud-dlna
+
+### Maintainer
+https://github.com/thanek
+

community-containers/libretranslate/libretranslate.json

@@ -25,6 +25,7 @@
             ],
             "nextcloud_exec_commands": [
                 "php /var/www/html/occ app:install integration_libretranslate",
+                "php /var/www/html/occ app:enable integration_libretranslate",
                 "php /var/www/html/occ config:app:set integration_libretranslate host --value='http://nextcloud-aio-libretranslate'",
                 "php /var/www/html/occ config:app:set integration_libretranslate port --value='5000'"
             ]

community-containers/libretranslate/readme.md

@@ -1,4 +1,4 @@
-## Local AI
+## LibreTranslate
 This container bundles LibreTranslate and auto-configures it for you.
 
 ### Notes

community-containers/local-ai/local-ai.json

@@ -20,7 +20,7 @@
                 },
                 {
                     "source": "nextcloud_aio_localai_images",
-                    "destination": "/images",
+                    "destination": "/tmp/generated/images/",
                     "writeable": true
                 },
                 {
@@ -35,8 +35,10 @@
                 "echo 'Scanning nextcloud-aio-local-ai folder for admin user...'",
                 "php /var/www/html/occ files:scan --path='/admin/files/nextcloud-aio-local-ai'",
                 "php /var/www/html/occ app:install integration_openai",
+                "php /var/www/html/occ app:enable integration_openai",
                 "php /var/www/html/occ config:app:set integration_openai url --value http://nextcloud-aio-local-ai:8080",
-                "php /var/www/html/occ app:install assistant"
+                "php /var/www/html/occ app:install assistant",
+                "php /var/www/html/occ app:enable assistant"
             ]
         }
     ]

community-containers/plex/readme.md

@@ -5,7 +5,7 @@ This container bundles Plex and auto-configures it for you.
 - This is not working on arm64 since Plex does only provide x64 docker images.
 - This is not working on Docker Desktop since it needs `network_mode: host` in order to work correctly.
 - If you have a firewall like ufw configured, you might need to open all Plex ports in there first in order to make it work. Especially port 32400 is important!
-- After adding and starting the container, you need to visit http://ip.address.of.server:32400 in order to claim your server with a plex account
+- After adding and starting the container, you need to visit http://ip.address.of.server:32400/manage in order to claim your server with a plex account
 - The data of Plex will be automatically included in AIOs backup solution!
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 

manual-install/latest.yml

@@ -143,6 +143,8 @@ services:
       - TALK_RECORDING_HOST=nextcloud-aio-talk-recording
       - FULLTEXTSEARCH_PASSWORD=${FULLTEXTSEARCH_PASSWORD}
       - REMOVE_DISABLED_APPS=${REMOVE_DISABLED_APPS}
+      - APACHE_PORT=${APACHE_PORT}
+      - APACHE_IP_BINDING=${APACHE_IP_BINDING}
     restart: unless-stopped
     networks:
       - nextcloud-aio

migration.md

@@ -18,6 +18,7 @@ The procedure for migrating only the files works like this:
 1. Next, run `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chown -R 33:0 /mnt/ncdata/` and `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chmod -R 750 /mnt/ncdata/` to apply the correct permissions. (Or if `NEXTCLOUD_DATADIR` was provided, apply `chown -R 33:0` and `chmod -R 750` to the chosen path.)
 1. Start the containers again and wait until all containers are running
 1. Run `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan-app-data && sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan --all` in order to scan all files in the datadirectory.
+1. If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
 
 ## Migrate the files and the database
 **Please note**: this is much more complicated than migrating only the files and also not as failproof so be warned! Also, this will not work on former snap installations as the snap is read-only and thus you cannot install the necessary `pdo_pgsql` PHP extension. So if migrating from snap, you will need to use one of the other methods. However you could try to ask if the snaps maintainer could add this one small PHP extension to the snap here: https://github.com/nextcloud-snap/nextcloud-snap/issues which would allow for an easy migration.
@@ -84,5 +85,21 @@ The procedure for migrating the files and the database works like this:
 Now the whole Nextcloud instance should work again.<br>
 If not, feel free to restore the AIO instance from backup and start at step 8 again.
 
+If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
+
 ## Use the user_migration app
 A new way since the Nextcloud update to 24 is to use the new [user_migration app](https://apps.nextcloud.com/apps/user_migration#app-gallery). It allows to export the most important data on one instance and import it on a different Nextcloud instance. For that, you need to install and enable the user_migration app on your old instance, trigger the export for the user, create the user on the new instance, log in with that user and import the archive that was created during the export. This then needs to be done for each user that you want to migrate.
+
+If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
+
+# Synchronising with clients after migration
+#### From https://docs.nextcloud.com/server/latest/admin_manual/maintenance/restore.html#synchronising-with-clients-after-data-recovery
+By default the Nextcloud server is considered the authoritative source for the data. If the data on the server and the client differs clients will default to fetching the data from the server.
+
+If the recovered backup is outdated the state of the clients may be more up to date than the state of the server. In this case also make sure to run `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ maintenance:data-fingerprint` command afterwards. It changes the logic of the synchronisation algorithm to try an recover as much data as possible. Files missing on the server are therefore recovered from the clients and in case of different content the users will be asked.
+
+>[!Note]
+>The usage of maintenance:data-fingerprint can cause conflict dialogues and difficulties deleting files on the client. Therefore it’s only recommended to prevent dataloss if the backup was outdated.
+
+
+If you are running multiple application servers you will need to make sure the config files are synced between them so that the updated data-fingerprint is applied on all instances.

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 7.4.1
+version: 7.5.1
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -57,7 +57,7 @@ spec:
               value: nextcloud-aio-talk
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-apache:20231016_081107-latest
+          image: nextcloud/aio-apache:20231030_072910-latest
           name: nextcloud-aio-apache
           ports:
             - containerPort: {{ .Values.APACHE_PORT }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -39,7 +39,7 @@ spec:
               value: "90"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-clamav:20231016_081107-latest
+          image: nextcloud/aio-clamav:20231030_072910-latest
           name: nextcloud-aio-clamav
           ports:
             - containerPort: 3310

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -37,7 +37,7 @@ spec:
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true {{ .Values.COLLABORA_SECCOMP_POLICY }} --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: nextcloud/aio-collabora:20231016_081107-latest
+          image: nextcloud/aio-collabora:20231030_072910-latest
           name: nextcloud-aio-collabora
           ports:
             - containerPort: 9980

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -61,7 +61,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-postgresql:20231016_081107-latest
+          image: nextcloud/aio-postgresql:20231030_072910-latest
           name: nextcloud-aio-database
           ports:
             - containerPort: 5432

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -55,7 +55,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: nextcloud/aio-fulltextsearch:20231016_081107-latest
+          image: nextcloud/aio-fulltextsearch:20231030_072910-latest
           name: nextcloud-aio-fulltextsearch
           ports:
             - containerPort: 9200

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -27,7 +27,7 @@ spec:
         - env:
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-imaginary:20231016_081107-latest
+          image: nextcloud/aio-imaginary:20231030_072910-latest
           name: nextcloud-aio-imaginary
           ports:
             - containerPort: 9000

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -45,6 +45,8 @@ spec:
               value: "{{ .Values.NEXTCLOUD_PASSWORD }}"
             - name: ADMIN_USER
               value: admin
+            - name: APACHE_PORT
+              value: "{{ .Values.APACHE_PORT }}"
             - name: CLAMAV_ENABLED
               value: "{{ .Values.CLAMAV_ENABLED }}"
             - name: CLAMAV_HOST
@@ -121,7 +123,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: UPDATE_NEXTCLOUD_APPS
               value: "{{ .Values.UPDATE_NEXTCLOUD_APPS }}"
-          image: nextcloud/aio-nextcloud:20231016_081107-latest
+          image: nextcloud/aio-nextcloud:20231030_072910-latest
           name: nextcloud-aio-nextcloud
           ports:
             - containerPort: 9000

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -50,7 +50,7 @@ spec:
               value: nextcloud-aio-redis
             - name: REDIS_HOST_PASSWORD
               value: "{{ .Values.REDIS_PASSWORD }}"
-          image: nextcloud/aio-notify-push:20231016_081107-latest
+          image: nextcloud/aio-notify-push:20231030_072910-latest
           name: nextcloud-aio-notify-push
           ports:
             - containerPort: 7867

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -43,7 +43,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-onlyoffice:20231016_081107-latest
+          image: nextcloud/aio-onlyoffice:20231030_072910-latest
           name: nextcloud-aio-onlyoffice
           ports:
             - containerPort: 80

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -38,7 +38,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-redis:20231016_081107-latest
+          image: nextcloud/aio-redis:20231030_072910-latest
           name: nextcloud-aio-redis
           ports:
             - containerPort: 6379

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -37,7 +37,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk:20231016_081107-latest
+          image: nextcloud/aio-talk:20231030_072910-latest
           name: nextcloud-aio-talk
           ports:
             - containerPort: {{ .Values.TALK_PORT }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -33,7 +33,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk-recording:20231016_081107-latest
+          image: nextcloud/aio-talk-recording:20231030_072910-latest
           name: nextcloud-aio-talk-recording
           ports:
             - containerPort: 1234

nextcloud-aio-helm-chart/update-helm.sh

@@ -29,6 +29,7 @@ source /tmp/sample.conf
 rm /tmp/sample.conf
 sed -i "s|:latest$|:$DOCKER_TAG-latest|" latest.yml
 sed -i "s|\${APACHE_IP_BINDING}:||" latest.yml
+sed -i '/APACHE_IP_BINDING/d' latest.yml
 sed -i "s|\${APACHE_PORT}:\${APACHE_PORT}/|$APACHE_PORT:$APACHE_PORT/|" latest.yml
 sed -i "s|\${TALK_PORT}:\${TALK_PORT}/|$TALK_PORT:$TALK_PORT/|g" latest.yml
 sed -i "s|- \${APACHE_PORT}|- $APACHE_PORT|" latest.yml

php/composer.lock

@@ -391,16 +391,16 @@
         },
         {
             "name": "laravel/serializable-closure",
-            "version": "v1.3.1",
+            "version": "v1.3.2",
             "source": {
                 "type": "git",
                 "url": "https://github.com/laravel/serializable-closure.git",
-                "reference": "e5a3057a5591e1cfe8183034b0203921abe2c902"
+                "reference": "076fe2cf128bd54b4341cdc6d49b95b34e101e4c"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/laravel/serializable-closure/zipball/e5a3057a5591e1cfe8183034b0203921abe2c902",
-                "reference": "e5a3057a5591e1cfe8183034b0203921abe2c902",
+                "url": "https://api.github.com/repos/laravel/serializable-closure/zipball/076fe2cf128bd54b4341cdc6d49b95b34e101e4c",
+                "reference": "076fe2cf128bd54b4341cdc6d49b95b34e101e4c",
                 "shasum": ""
             },
             "require": {
@@ -447,7 +447,7 @@
                 "issues": "https://github.com/laravel/serializable-closure/issues",
                 "source": "https://github.com/laravel/serializable-closure"
             },
-            "time": "2023-07-14T13:56:28+00:00"
+            "time": "2023-10-17T13:38:16+00:00"
         },
         {
             "name": "nikic/fast-route",

php/src/Docker/DockerActionManager.php

@@ -403,6 +403,9 @@ class DockerActionManager
                     } else {
                         $replacements[1] = '';
                     }
+                // Allow to get local ip-address of database container which allows to talk to it even in host mode (the container that requires this needs to be started first then)
+                } elseif ($out[1] === 'AIO_DATABASE_HOST') {
+                    $replacements[1] = gethostbyname('nextcloud-aio-database');
                 } else {
                     $secret = $this->configurationManager->GetSecret($out[1]);
                     if ($secret === "") {
@@ -577,14 +580,8 @@ class DockerActionManager
     public function PullContainer(Container $container) : void
     {
         $url = $this->BuildApiUrl(sprintf('images/create?fromImage=%s', urlencode($this->BuildImageName($container))));
-        try {
-            $this->guzzleClient->post($url);
-        } catch (RequestException $e) {
-            error_log('Could not get image ' . $this->BuildImageName($container) . ' from docker hub. Probably due to rate limits. ' . $e->getMessage());
-            // Don't exit here because it is possible that the image is already present 
-            // and we ran into docker hub limits.
-            // We will exit later if not image should be available.
-        }
+        // do not catch any exception so that it always throws and logs the error
+        $this->guzzleClient->post($url);
     }
 
     private function isContainerUpdateAvailable(string $id) : string

php/templates/containers.twig

@@ -16,7 +16,7 @@
     </header>
 
     <div class="content">
-        <h1>Nextcloud AIO v7.5.0</h1>
+        <h1>Nextcloud AIO v7.6.0</h1>
 
         {# Add 2nd tab warning #}
         <script type="text/javascript" src="second-tab-warning.js"></script>
@@ -649,7 +649,7 @@
                                 <input type="hidden" name="{{csrf.keys.value}}" value="{{csrf.value}}">
                                 <input class="button" type="submit" value="Submit timezone" onclick="return confirm('Are you sure that this is a valid timezone? Please double check by following the wikipedia article and checking the correct column since if not, it will break the startup since the database will not get correctly initialized and you will end in a startup loop.')" />
                             </form>
-                            You need to make sure that the timezone that you enter is valid. An example is <b>Europe/Berlin</b>. You can get valid values by looking at the 'TZ database name' column of this list: <a href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List"><b>click here</b></a>. The default is <b>Etc/UTC</b> if nothing is entered.<br><br>
+                            You need to make sure that the timezone that you enter is valid. An example is <b>Europe/Berlin</b>. You can get valid values by looking at the 'TZ identifier' column of this list: <a href="https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List"><b>click here</b></a>. The default is <b>Etc/UTC</b> if nothing is entered.<br><br>
                         {% else %}
                             The timezone for Nextcloud is currently set to <b>{{ timezone }}</b>. You can reset the timezone again by clicking on the button below.<br><br/>
                             <form method="POST" action="/api/configuration" class="xhr">

readme.md

@@ -704,7 +704,7 @@ If you want to use the user_sql app, the easiest way is to create an additional
 It is possible to install any of these to get a GUI for your AIO database. The pgAdmin container is recommended. You can get some docs on it here: https://www.pgadmin.org/docs/pgadmin4/latest/container_deployment.html. For the container to connect to the aio-database, you need to connect the container to the docker network `nextcloud-aio` and use `nextcloud-aio-database` as database host, `oc_nextcloud` as database username and the password that you get when running `sudo docker exec nextcloud-aio-nextcloud grep dbpassword config/config.php` as the password. Apart from that there is now a way for the community to add containers: https://github.com/nextcloud/all-in-one/discussions/3061#discussioncomment-7307045
 
 ### Mail server
-You can configure one yourself by using either of these three recommended projects: [Docker Mailserver](https://github.com/docker-mailserver/docker-mailserver/#docker-mailserver), [Maddy Mail Server](https://github.com/foxcpp/maddy#maddy-mail-server) or [Mailcow](https://github.com/mailcow/mailcow-dockerized#mailcow-dockerized-------). Docker Mailserver and Maddy Mail Server are probably a bit easier to set up as it is possible to run them using only one container but Mailcow has much more features. Apart from that there is now a way for the community to add containers: https://github.com/nextcloud/all-in-one/discussions/356#discussioncomment-7133547
+You can configure one yourself by using either of these three recommended projects: [Docker Mailserver](https://github.com/docker-mailserver/docker-mailserver/#docker-mailserver), [Mailu](https://github.com/Mailu/Mailu), [Maddy Mail Server](https://github.com/foxcpp/maddy#maddy-mail-server) or [Mailcow](https://github.com/mailcow/mailcow-dockerized#mailcow-dockerized-------). Docker Mailserver and Maddy Mail Server are probably a bit easier to set up as it is possible to run them using only one container but Mailcow and Mailu both have more features. Apart from that there is now a way for the community to add containers: https://github.com/nextcloud/all-in-one/discussions/356#discussioncomment-7133547
 
 ### How to migrate from an already existing Nextcloud installation to Nextcloud AIO?
 Please see the following documentation on this: [migration.md](https://github.com/nextcloud/all-in-one/blob/main/migration.md)

reverse-proxy.md

@@ -8,7 +8,7 @@ In order to run Nextcloud behind a web server or reverse proxy (like Apache, Ngi
 
 **Attention:** The process to run Nextcloud behind a reverse proxy consists of at least steps 1, 2 and 4:
 1. **Configure the reverse proxy! See [point 1](#1-add-this-to-your-reverse-proxy-config)**
-1. **Use the in this document provided startup command! See [point 2](#2-use-this-startup-command)**
+1. **Use this startup command! See [point 2](#2-use-this-startup-command)**
 1. Optional: If the reverse proxy is installed on the same host and in the host network, you should limit the apache container to only listen on localhost. See [point 3](#3-limit-the-access-to-the-apache-container)
 1. **Open the AIO interface. See [point 4](#4-open-the-aio-interface)**
 1. Optional: Get a valid certificate for the AIO interface! See [point 5](#5-optional-get-a-valid-certificate-for-the-aio-interface)
@@ -383,7 +383,7 @@ Second, see these screenshots for a working config:
 
 ![grafik](https://user-images.githubusercontent.com/75573284/213889724-1ab32264-3e0c-4d83-b067-9fe9d1672fb2.png)
 
-![grafik](https://user-images.githubusercontent.com/75573284/213889797-42642302-b079-4378-a4a6-079f4f67058c.png)
+![grafik](https://github.com/nextcloud/all-in-one/assets/24786786/fecbb5ef-d2f4-4e0f-bc4b-82207e2c2809)
 
 ![grafik](https://user-images.githubusercontent.com/75573284/213889746-87dbe8c5-4d1f-492f-b251-bbf82f1510d0.png)