Update index.yaml

Signed-off-by: szaimen <szaimen@users.noreply.github.com>

.github/workflows/command-rebase.yml

@@ -23,7 +23,7 @@ jobs:
 
     steps:
       - name: Add reaction on start
-        uses: peter-evans/create-or-update-comment@v3
+        uses: peter-evans/create-or-update-comment@v2
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}
           repository: ${{ github.event.repository.full_name }}
@@ -42,7 +42,7 @@ jobs:
           GITHUB_TOKEN: ${{ secrets.COMMAND_BOT_PAT }}
 
       - name: Add reaction on failure
-        uses: peter-evans/create-or-update-comment@v3
+        uses: peter-evans/create-or-update-comment@v2
         if: failure()
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}

.github/workflows/create-psalm-container.yml

@@ -23,7 +23,7 @@ jobs:
       - name: Modify the Dockerfile
         run: |
           set -x
-          sed -i 's|FROM php:7.4-alpine|FROM php:8.2-alpine|' "psalm-github-actions/Dockerfile"
+          sed -i 's|FROM php:7.4-alpine|FROM php:8.1-alpine|' "psalm-github-actions/Dockerfile"
           cat << APCU >> "psalm-github-actions/Dockerfile"
           RUN mkdir -p /usr/src/php/ext/apcu && \
             curl -fsSL https://pecl.php.net/get/apcu | tar xvz -C "/usr/src/php/ext/apcu" --strip 1 && \

.github/workflows/dependency-updates.yml

@@ -13,24 +13,23 @@ jobs:
     - uses: actions/checkout@v3
     - uses: shivammathur/setup-php@v2
       with:
-        php-version: 8.2
+        php-version: 8.1
         extensions: apcu
     - name: Run dependency update script
       run: |
         set -x
         cd ./php
-        composer update --with-all-dependencies
-        # Disable dependency updates for now
-        # set +e
-        # ALL_LINES="$(composer outdated | grep -v "^$\|Direct dependencies\|Everything up to date\|Transitive dependencies")"
-        # set -e
-        # while [ -n "$ALL_LINES" ]; do
-        #   CURRENT_LINE="$(echo "$ALL_LINES" | head -1)"
-        #   composer require "$(echo "$CURRENT_LINE" | awk '{print $1}')" "^$(echo "$CURRENT_LINE" | awk '{print $4}')" --with-all-dependencies
-        #   ALL_LINES="$(echo "$ALL_LINES" | sed '1d')"
-        # done
-        # echo "outdated dependencies:
-        # $(composer outdated)"
+        composer update
+        set +e
+        ALL_LINES="$(composer outdated | grep -v "^$\|Direct dependencies\|Everything up to date\|Transitive dependencies")"
+        set -e
+        while [ -n "$ALL_LINES" ]; do
+          CURRENT_LINE="$(echo "$ALL_LINES" | head -1)"
+          composer require "$(echo "$CURRENT_LINE" | awk '{print $1}')" "^$(echo "$CURRENT_LINE" | awk '{print $4}')" --with-all-dependencies
+          ALL_LINES="$(echo "$ALL_LINES" | sed '1d')"
+        done
+        echo "outdated dependencies:
+        $(composer outdated)"
     - name: Update apcu
       run: |
         # APCU
@@ -44,12 +43,12 @@ jobs:
         )"
         sed -i "s|pecl install APCu.*\;|pecl install APCu-$apcu_version\;|" ./Containers/mastercontainer/Dockerfile
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v5
+      uses: peter-evans/create-pull-request@v4
       with:
         commit-message: dependency updates
         signoff: true
         title: Dependency updates
         body: Automated dependency updates since dependabot does not support grouped updates
-        labels: dependencies, 3. to review
+        labels: dependencies, enhancement
         milestone: next
         branch: aio-dependency-update

.github/workflows/helm-release.yml

@@ -6,7 +6,7 @@ on:
     branches:
       - main
     paths:
-      - 'nextcloud-aio-helm-chart/**'
+      - 'helm-chart/**'
 
 jobs:
   release:
@@ -40,8 +40,9 @@ jobs:
         # TODO: switch back @main to a specific version like @v1.5.1 or higher
         uses: helm/chart-releaser-action@main
         with:
+          charts_repo_url: https://nextcloud.github.io/all-in-one
+          charts_dir: helm-chart
           mark_as_latest: false
-          charts_dir: .
         env:
           CR_TOKEN: "${{ secrets.GITHUB_TOKEN }}"
           CR_RELEASE_NAME_TEMPLATE: "helm-chart-{{ .Version }}"

.github/workflows/imaginary-update.yml

@@ -1,33 +0,0 @@
-name: imaginary-update
-
-on:
-  workflow_dispatch:
-  schedule:
-  - cron:  '00 12 * * *'
-
-jobs:
-  run_update:
-    name: update to latest imaginary commit on master branch
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v3
-    - name: Run imaginary-update
-      run: |
-        # Imaginary
-        imaginary_version="$(
-          git ls-remote https://github.com/h2non/imaginary master \
-            | cut -f1 \
-            | tail -1
-        )"
-        sed -i "s|go install github.com/h2non/imaginary.*;|go install github.com/h2non/imaginary@$imaginary_version;|" ./Containers/imaginary/Dockerfile
-        
-    - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v5
-      with:
-        commit-message: imaginary-update automated change
-        signoff: true
-        title: Imaginary update
-        body: Automated Imaginary container update
-        labels: dependencies, 3. to review
-        milestone: next
-        branch: imaginary-container-update

.github/workflows/json-validator.yml

@@ -15,6 +15,6 @@ jobs:
         uses: actions/checkout@v3
       - name: Validate Json
         run: |
-          sudo apt-get install python3-pip --no-install-recommends
+          sudo apt install python3-pip --no-install-recommends
           sudo pip3 install json-spec
           json validate --schema-file=php/containers-schema.json --document-file=php/containers.json

.github/workflows/lint-php.yml

@@ -3,7 +3,7 @@
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
 
-name: PHP Lint
+name: Lint
 
 on:
   pull_request:
@@ -23,7 +23,7 @@ jobs:
     runs-on: ubuntu-latest
     strategy:
       matrix:
-        php-versions: ["8.2"]
+        php-versions: ["8.1"]
 
     name: php-lint
 

.github/workflows/nextcloud-update.yml

@@ -66,12 +66,12 @@ jobs:
         sed -i "s|^ENV NEXTCLOUD_VERSION.*|ENV NEXTCLOUD_VERSION $NCVERSION|" ./Containers/nextcloud/Dockerfile
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@v5
+      uses: peter-evans/create-pull-request@v4
       with:
         commit-message: nextcloud-update automated change
         signoff: true
         title: Nextcloud update
         body: Automated Nextcloud container update
-        labels: dependencies, 3. to review
+        labels: dependencies, enhancement
         milestone: next
         branch: nextcloud-container-update

.github/workflows/php-deprecation-detector.yml

@@ -13,10 +13,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v3
-      - name: Set up php8.2
+      - name: Set up php8.1
         uses: shivammathur/setup-php@v2
         with:
-          php-version: 8.2
+          php-version: 8.1
           extensions: apcu
           coverage: none
 

.github/workflows/psalm-analysis.yml

@@ -12,10 +12,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - uses: actions/checkout@v3
-      - name: Set up php8.2
+      - name: Set up php8.1
         uses: shivammathur/setup-php@v2
         with:
-          php-version: 8.2
+          php-version: 8.1
           extensions: apcu
           coverage: none
 

.github/workflows/psalm-update-baseline.yml

@@ -12,10 +12,10 @@ jobs:
     steps:
       - uses: actions/checkout@v3
 
-      - name: Set up php8.2
+      - name: Set up php8.1
         uses: shivammathur/setup-php@v2
         with:
-          php-version: 8.2
+          php-version: 8.1
           extensions: apcu
           coverage: none
 
@@ -31,7 +31,7 @@ jobs:
         continue-on-error: true
 
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@v5
+        uses: peter-evans/create-pull-request@v4
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}
           commit-message: Update psalm baseline
@@ -42,8 +42,7 @@ jobs:
           # Make sure we can open multiple PRs
           branch-suffix: timestamp
           title: '[Automated] Update psalm-baseline.xml'
-          milestone: next
           body: |
             Auto-generated update psalm-baseline.xml with fixed psalm warnings
           labels: |
-            3. to review, dependencies
+            3. to review

.github/workflows/twig-lint.yml

@@ -1,55 +0,0 @@
-name: Twig Lint
-
-on:
-  pull_request:
-  push:
-    branches:
-      - main
-
-permissions:
-  contents: read
-
-concurrency: 
-  group: lint-twig-${{ github.head_ref || github.run_id }}
-  cancel-in-progress: true
-
-jobs:
-  twig-lint:
-    runs-on: ubuntu-latest
-    strategy:
-      matrix:
-        php-versions: ["8.2"]
-
-    name: twig-lint
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v3
-
-      - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@v2
-        with:
-          php-version: ${{ matrix.php-versions }}
-          coverage: none
-
-      - name: twig lint
-        run: |
-          cd php
-          composer require sserbin/twig-linter:@dev --no-progress --dev
-          composer install
-          chmod +x ./vendor/bin/twig-linter
-          ./vendor/bin/twig-linter lint ./templates
-
-  summary:
-    permissions:
-      contents: none
-    runs-on: ubuntu-latest
-    needs: twig-lint
-
-    if: always()
-
-    name: twig-lint-summary
-
-    steps:
-      - name: Summary status
-        run: if ${{ needs.twig-lint.result != 'success' && needs.twig-lint.result != 'skipped' }}; then exit 1; fi

.github/workflows/update-helm.yml

@@ -17,17 +17,17 @@ jobs:
           DOCKER_TAG="$(curl -L -s 'https://registry.hub.docker.com/v2/repositories/nextcloud/all-in-one/tags?page_size=1024' | jq '."results"[]["name"]' | sed 's|"||g' | grep '^20' | sort -r | head -1)"
           DOCKER_TAG="${DOCKER_TAG%%-latest*}"
           export DOCKER_TAG
-          if [ -n "$DOCKER_TAG" ] && ! grep -q "$DOCKER_TAG" ./nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml; then
-            sudo bash nextcloud-aio-helm-chart/update-helm.sh "$DOCKER_TAG"
+          if [ -n "$DOCKER_TAG" ] && ! grep -q "$DOCKER_TAG" ./helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml; then
+            sudo bash helm-chart/update-helm.sh "$DOCKER_TAG"
           fi
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@v5
+        uses: peter-evans/create-pull-request@v4
         with:
           commit-message: Helm Chart updates
           signoff: true
           title: Helm Chart updates
           body: Automated Helm Chart updates for the yaml files. It can be merged if it looks good at any time which will automatically trigger a new release of the helm chart.
-          labels: dependencies, 3. to review
+          labels: dependencies
           milestone: next
           branch: aio-helm-update
           token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/update-yaml.yml

@@ -16,13 +16,13 @@ jobs:
         run: |
           sudo bash manual-install/update-yaml.sh
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@v5
+        uses: peter-evans/create-pull-request@v4
         with:
           commit-message: Yaml updates
           signoff: true
           title: Yaml updates
           body: Automated yaml updates for the docker-compose files. Should only be merged shortly before the next latest release.
-          labels: dependencies, 3. to review
+          labels: dependencies
           milestone: next
           branch: aio-yaml-update
           token: ${{ secrets.GITHUB_TOKEN }}

Containers/apache/Caddyfile

@@ -5,10 +5,6 @@
         root /mnt/data/caddy
     }
 
-    servers {
-        # trusted_proxies placeholder
-    }
-
     log {
         level ERROR
     }
@@ -16,21 +12,37 @@
 
 {$PROTOCOL}://{$NC_DOMAIN}:{$APACHE_PORT} {
 
-    # Collabora
-    route /browser/* {
-        reverse_proxy {$COLLABORA_HOST}:9980
-    }
-    route /hosting/* {
-        reverse_proxy {$COLLABORA_HOST}:9980
-    }
-    route /cool/* {
-        reverse_proxy {$COLLABORA_HOST}:9980
-    }
-
     # Notify Push
     route /push/* {
         uri strip_prefix /push
-        reverse_proxy {$NEXTCLOUD_HOST}:7867
+        reverse_proxy {$NEXTCLOUD_HOST}:7867 {
+            # trusted_proxies placeholder
+        }
+    }
+
+    # Talk
+    route /standalone-signaling/* {
+        uri strip_prefix /standalone-signaling
+        reverse_proxy {$TALK_HOST}:8081 {
+            # trusted_proxies placeholder
+        }
+    }
+
+    # Collabora
+    route /browser/* {
+        reverse_proxy {$COLLABORA_HOST}:9980 {
+            # trusted_proxies placeholder
+        }
+    }
+    route /hosting/* {
+        reverse_proxy {$COLLABORA_HOST}:9980 {
+            # trusted_proxies placeholder
+        }
+    }
+    route /cool/* {
+        reverse_proxy {$COLLABORA_HOST}:9980 {
+            # trusted_proxies placeholder
+        }
     }
 
     # Onlyoffice
@@ -39,24 +51,19 @@
         reverse_proxy {$ONLYOFFICE_HOST}:80 {
             header_up X-Forwarded-Host {http.request.host}/onlyoffice
             header_up X-Forwarded-Proto https
+            # trusted_proxies placeholder
         }
     }
 
-    # Talk
-    route /standalone-signaling/* {
-        uri strip_prefix /standalone-signaling
-        reverse_proxy {$TALK_HOST}:8081
-    }
-
-    # Others
-    import /mnt/data/caddy-imports/*
-
     # Nextcloud
     route {
         rewrite /.well-known/carddav /remote.php/dav
         rewrite /.well-known/caldav /remote.php/dav
         header Strict-Transport-Security max-age=31536000;
-        reverse_proxy localhost:8000
+        reverse_proxy localhost:8000 {
+            # See https://github.com/nextcloud/all-in-one/issues/828
+            # trusted_proxies placeholder
+        }
     }
 
     # TLS options

Containers/apache/Dockerfile

@@ -1,17 +1,7 @@
 # Caddy is a requirement
 FROM caddy:2.6.4-alpine as caddy
 
-FROM httpd:2.4.57-alpine3.17
-
-COPY --from=caddy /usr/bin/caddy /usr/bin/caddy
-
-COPY --chown=33:33 Caddyfile /Caddyfile
-COPY --chmod=664 nextcloud.conf /usr/local/apache2/conf/nextcloud.conf
-COPY --chmod=664 supervisord.conf /supervisord.conf
-COPY --chmod=775 start.sh /start.sh
-COPY --chmod=775 healthcheck.sh /healthcheck.sh
-
-VOLUME /mnt/data
+FROM httpd:2.4.56-alpine3.17
 
 RUN set -ex; \
     apk add --no-cache shadow; \
@@ -19,56 +9,77 @@ RUN set -ex; \
     usermod -u 333 -g 333 xfs; \
     groupmod -g 33 www-data; \
     usermod -u 33 -g 33 www-data; \
-    apk del --no-cache shadow; \
-    \
-    mkdir -p /mnt/data; \
-    chown -R www-data:www-data /mnt/data; \
-    \
+    apk del --no-cache shadow
+
+RUN mkdir -p /mnt/data; \
+    chown www-data:www-data /mnt/data;
+
+VOLUME /mnt/data
+
+RUN set -ex; \
     apk add --no-cache \
         bash \
         supervisor \
+        wget \
         tzdata \
         ca-certificates \
         openssl \
-        netcat-openbsd; \
-    \
-    sed -i \
-            -e '/^Listen /d' \
-            -e 's/^#\(LoadModule .*mod_rewrite.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_headers.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_proxy.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_proxy_fcgi.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_setenvif.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_env.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_mime.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_dir.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_authz_core.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_alias.so\)/\1/' \
-            -e 's/^#\(LoadModule .*mod_mpm_event.so\)/\1/' \
-            -e 's/\(LoadModule .*mod_mpm_worker.so\)/#\1/' \
-            -e 's/\(LoadModule .*mod_mpm_prefork.so\)/#\1/' \
-        /usr/local/apache2/conf/httpd.conf; \
-    echo "Include conf/nextcloud.conf" | tee -a /usr/local/apache2/conf/httpd.conf; \
-    echo "ServerName localhost" | tee -a /usr/local/apache2/conf/httpd.conf; \
-    \
-    rm -rf /usr/local/apache2/conf/original /var/www; \
-    mkdir -p /var/www; \
-    chown -R www-data:www-data /var/www; \
-    \
-    mkdir /var/log/supervisord; \
+        netcat-openbsd
+
+COPY --from=caddy /usr/bin/caddy /usr/bin/
+RUN chmod +x /usr/bin/caddy
+
+RUN sed -i \
+                -e '/^Listen /d' \
+                -e 's/^#\(LoadModule .*mod_rewrite.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_headers.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_proxy.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_proxy_fcgi.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_setenvif.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_env.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_mime.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_dir.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_authz_core.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_alias.so\)/\1/' \
+                -e 's/^#\(LoadModule .*mod_mpm_event.so\)/\1/' \
+                -e 's/\(LoadModule .*mod_mpm_worker.so\)/#\1/' \
+                -e 's/\(LoadModule .*mod_mpm_prefork.so\)/#\1/' \
+                conf/httpd.conf; \
+		echo "Include conf/nextcloud.conf" | tee -a conf/httpd.conf; \
+                echo "ServerName localhost" | tee -a conf/httpd.conf
+		
+COPY nextcloud.conf conf
+
+RUN set -ex; \
+    rm -rf conf/original conf/original && \
+    rm -rf /var/www/html/* && \
+    mkdir /var/www && \
+    chown -R www-data:www-data /var/www;
+
+RUN mkdir /var/log/supervisord; \
     mkdir /var/run/supervisord; \
     chown www-data:www-data /var/run/supervisord; \
-    chown www-data:www-data /var/log/supervisord; \
-    \
+    chown www-data:www-data /var/log/supervisord;
+
+COPY Caddyfile /
+
+COPY start.sh /usr/bin/
+COPY healthcheck.sh /usr/bin/
+COPY supervisord.conf /
+RUN chmod +x /usr/bin/start.sh; \
+    chmod +x /usr/bin/healthcheck.sh; \
+    chmod +r /supervisord.conf; \
+    chown www-data:www-data /Caddyfile; \
     chown -R www-data:www-data /usr/local/apache2; \
-    chmod +r -R /usr/local/apache2; \
-    \
-    echo "root:$(openssl rand -base64 12)" | chpasswd
+    chmod +r -R /usr/local/apache2
+
+# Give root a random password
+RUN echo "root:$(openssl rand -base64 12)" | chpasswd
 
 USER www-data
 
-ENTRYPOINT ["/start.sh"]
+ENTRYPOINT ["start.sh"]
 CMD ["/usr/bin/supervisord", "-c", "/supervisord.conf"]
 
-HEALTHCHECK CMD /healthcheck.sh
+HEALTHCHECK CMD healthcheck.sh
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/apache/healthcheck.sh

@@ -2,5 +2,8 @@
 
 nc -z "$NEXTCLOUD_HOST" 9000 || exit 0
 nc -z localhost 8000 || exit 1
-nc -z localhost "$APACHE_PORT" || exit 1
-nc -z "$NC_DOMAIN" 443 || exit 1
+if [ "$APACHE_PORT" != '443' ]; then
+    nc -z localhost "$APACHE_PORT" || exit 1
+else
+    nc -z "$NC_DOMAIN" "$APACHE_PORT" || exit 1
+fi

Containers/apache/start.sh

@@ -39,9 +39,9 @@ echo "$CADDYFILE" > /Caddyfile
 
 # Change the trusted_proxies in case of reverse proxies
 if [ "$APACHE_PORT" != '443' ]; then
-    CADDYFILE="$(sed 's|# trusted_proxies placeholder|trusted_proxies static private_ranges|' /Caddyfile)"
+    CADDYFILE="$(sed 's|# trusted_proxies placeholder|trusted_proxies private_ranges|' /Caddyfile)"
 else
-    CADDYFILE="$(sed 's|trusted_proxies.*private_ranges|# trusted_proxies placeholder|' /Caddyfile)"
+    CADDYFILE="$(sed 's|trusted_proxies private_ranges|# trusted_proxies placeholder|' /Caddyfile)"
 fi
 echo "$CADDYFILE" > /Caddyfile
 
@@ -51,15 +51,6 @@ caddy fmt --overwrite /Caddyfile
 # Add caddy path
 mkdir -p /mnt/data/caddy/
 
-# Add caddy import path
-mkdir -p /mnt/data/caddy-imports
-
-# Remove falsely added Nextcloud conf
-rm -f /mnt/data/caddy-imports/nextcloud
-
-# Makre sure that the caddy-imports dir is not empty
-echo "# empty file so that caddy does not print a warning" > /mnt/data/caddy-imports/empty
-
 # Fix apache startup
 rm -f /usr/local/apache2/logs/httpd.pid
 

Containers/borgbackup/Dockerfile

@@ -1,4 +1,4 @@
-FROM alpine:3.17.3
+FROM alpine:3.17.2
 
 RUN set -ex; \
     \
@@ -13,8 +13,11 @@ RUN set -ex; \
 
 VOLUME /root
 
-COPY --chmod=770 *.sh /
-
-ENTRYPOINT ["/start.sh"]
+COPY start.sh /usr/bin/
+COPY backupscript.sh /
+RUN chmod +x /usr/bin/start.sh; \
+    chmod +x /backupscript.sh
 
+USER root
+ENTRYPOINT ["start.sh"]
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/borgbackup/backupscript.sh

@@ -24,14 +24,6 @@ for directory in "${VOLUME_DIRS[@]}"; do
         exit 1
     fi
 done
-# Test if default volumes are there
-DEFAULT_VOLUMES=(nextcloud_aio_apache nextcloud_aio_nextcloud nextcloud_aio_database nextcloud_aio_database_dump nextcloud_aio_elasticsearch nextcloud_aio_nextcloud_data nextcloud_aio_mastercontainer)
-for volume in "${DEFAULT_VOLUMES[@]}"; do
-    if ! mountpoint -q "/nextcloud_aio_volumes/$volume"; then
-        echo "$volume is missing which is not intended."
-        exit 1
-    fi
-done
 
 # Check if target is mountpoint
 if ! mountpoint -q /mnt/borgbackup; then
@@ -94,9 +86,8 @@ if [ "$BORG_MODE" = backup ]; then
     if ! [ -f "$BORG_BACKUP_DIRECTORY/config" ]; then
         # Don't initialize if already initialized
         if [ -f "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/borg.config" ]; then
-            echo "No borg config file was found in the targeted directory."
-            echo "This might happen if the targeted directory is located on an external drive and the drive not connected anymore. You should check this."
-            echo "If you instead want to initialize a new backup repository, you may delete the 'borg.config' file that is stored in the mastercontainer volume manually, which will allow you to initialize a new borg repository in the chosen directory:"
+            echo "Cannot initialize a new repository as that was already done at least one time."
+            echo "If you still want to do so, you may delete the 'borg.config' file that is stored in the mastercontainer volume manually, which will allow you to initialize a new borg repository in the chosen directory:"
             echo "sudo docker exec nextcloud-aio-mastercontainer rm /mnt/docker-aio-config/data/borg.config"
             exit 1
         fi
@@ -136,18 +127,11 @@ if [ "$BORG_MODE" = backup ]; then
     # Borg options
     # auto,zstd compression seems to has the best ratio based on:
     # https://forum.level1techs.com/t/optimal-compression-for-borg-backups/145870/6
-    BORG_OPTS=(-v --stats --compression "auto,zstd" --exclude-caches)
+    BORG_OPTS=(-v --stats --compression "auto,zstd" --exclude-caches --checkpoint-interval 86400)
 
     # Exclude the nextcloud log and audit log for GDPR reasons
     BORG_EXCLUDE=(--exclude "/nextcloud_aio_volumes/nextcloud_aio_nextcloud/data/nextcloud.log*" --exclude "/nextcloud_aio_volumes/nextcloud_aio_nextcloud/data/audit.log")
 
-    # Make sure that there is always a borg.config file before creating a new backup
-    if ! [ -f "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/borg.config" ]; then
-        echo "Did not find borg.config file in the mastercontainer volume."
-        echo "Cannot create a backup as this is wrong."
-        exit 1
-    fi
-
     # Create the backup
     echo "Starting the backup..."
     get_start_time
@@ -155,7 +139,6 @@ if [ "$BORG_MODE" = backup ]; then
         echo "Deleting the failed backup archive..."
         borg delete --stats "$BORG_BACKUP_DIRECTORY::$CURRENT_DATE-nextcloud-aio"
         echo "Backup failed!"
-        echo "You might want to check the backup integrity via the AIO interface."
         if [ "$NEW_REPOSITORY" = 1 ]; then
             echo "Deleting borg.config file so that you can choose a different location for the backup."
             rm "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/borg.config"
@@ -379,7 +362,6 @@ if [ "$BORG_MODE" = check ]; then
     # Perform the check
     if ! borg check -v --verify-data "$BORG_BACKUP_DIRECTORY"; then
         echo "Some errors were found while checking the backup integrity!"
-        echo "Check the AIO interface for advices on how to proceed now!"
         exit 1
     fi
 

Containers/clamav/Dockerfile

@@ -1,10 +1,7 @@
-# Probably from this file: https://github.com/Cisco-Talos/clamav-docker/blob/main/clamav/1.1/alpine/Dockerfile
-FROM clamav/clamav:1.1.0-1
+# Probably from this file: https://github.com/Cisco-Talos/clamav-docker/blob/main/clamav/0.105/alpine/Dockerfile
+FROM clamav/clamav:1.0.1-1
 
-COPY clamav.conf /tmp/clamav.conf
-
-RUN set -ex; \
-    apk add --no-cache tzdata; \
-    cat /tmp/clamav.conf | tee -a /etc/clamav/clamd.conf; \
-    rm /tmp/clamav.conf
+RUN apk add --no-cache tzdata
+COPY clamav.conf /tmp/
+RUN cat /tmp/clamav.conf >> /etc/clamav/clamd.conf
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/collabora/Dockerfile

@@ -1,5 +1,5 @@
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/tree/master/docker
-FROM collabora/code:22.05.14.3.1
+FROM collabora/code:22.05.12.2.1
 
 USER root
 

Containers/domaincheck/Dockerfile

@@ -1,16 +1,18 @@
-FROM alpine:3.17.3
-RUN set -ex; \
-    apk add --no-cache bash lighttpd netcat-openbsd; \
-    adduser -S www-data -G www-data; \
-    rm -rf /etc/lighttpd/lighttpd.conf; \
-    chmod +r -R /etc/lighttpd; \
-    mkdir -p /var/www/domaincheck; \
-    chown www-data:www-data -R /var/www
-COPY --chown=www-data:www-data lighttpd.conf /etc/lighttpd/lighttpd.conf
+FROM alpine:3.17.2
+RUN apk add --no-cache lighttpd bash netcat-openbsd
 
-COPY --chmod=775 start.sh /start.sh
+RUN adduser -S www-data -G www-data
+RUN rm -rf /etc/lighttpd/lighttpd.conf
+COPY lighttpd.conf /etc/lighttpd/lighttpd.conf
+RUN chmod +r -R /etc/lighttpd && \
+    chown www-data:www-data -R /var/www && \
+    chown www-data:www-data /etc/lighttpd/lighttpd.conf
+
+COPY start.sh /
+RUN chmod +x /start.sh
 
 USER www-data
+RUN mkdir -p /var/www/domaincheck/
 ENTRYPOINT ["/start.sh"]
 
 HEALTHCHECK CMD nc -z localhost $APACHE_PORT || exit 1

Containers/fulltextsearch/Dockerfile

@@ -1,15 +1,15 @@
 # Probably from here https://github.com/elastic/elasticsearch/blob/main/distribution/docker/src/docker/Dockerfile
-FROM elasticsearch:7.17.10
+FROM elasticsearch:7.17.9
+
+RUN elasticsearch-plugin install --batch ingest-attachment
 
 RUN set -ex; \
     \
-    export DEBIAN_FRONTEND=noninteractive; \
     apt-get update; \
     apt-get install -y --no-install-recommends \
         tzdata \
     ; \
-    rm -rf /var/lib/apt/lists/*; \
-    elasticsearch-plugin install --batch ingest-attachment
+    rm -rf /var/lib/apt/lists/*
 
 HEALTHCHECK CMD nc -z localhost 9200 || exit 1
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/imaginary/Dockerfile

@@ -1,35 +1,29 @@
-FROM golang:1.20.4-alpine3.17 as go
+# From https://github.com/h2non/imaginary/blob/master/Dockerfile
+FROM nextcloud/imaginary:20230301
+
+USER root
 RUN set -ex; \
-    apk add --no-cache \
-        vips-dev \
-        vips-magick \
-        vips-heif \
-        vips-jxl \
-        vips-poppler \
-        build-base; \
-    go install github.com/h2non/imaginary@b632dae8cc321452c3f85bcae79c580b1ae1ed84;
-
-FROM alpine:3.17.3
-RUN set -ex; \
-    apk add --no-cache \
-        tzdata \
-        ca-certificates \
-        netcat-openbsd \
-        vips \
-        vips-magick \
-        vips-heif \
-        vips-jxl \
-        vips-poppler
-
-COPY --from=go /go/bin/imaginary /usr/local/bin/imaginary
-
-ENV PORT 9000
-
+    \
+    apt-get update; \
+    apt-get install -y --no-install-recommends \
+        netcat \
+    ; \
+    echo "deb http://deb.debian.org/debian bookworm main" > /etc/apt/sources.list.d/bookworm.list; \
+    apt-get update; \
+    apt-get install -t bookworm -y --no-install-recommends \
+        libheif1 \
+        libde265-0 \
+        libx265-199 \
+        libvips \
+    ; \
+    rm /etc/apt/sources.list.d/bookworm.list; \
+    rm -rf /var/lib/apt/lists/*
 USER nobody
 
+ENTRYPOINT ["/usr/local/bin/imaginary", "-return-size", "-max-allowed-resolution", "222.2"]
+
+HEALTHCHECK CMD nc -z localhost 9000 || exit 1
+LABEL com.centurylinklabs.watchtower.monitor-only="true"
+
 # https://github.com/h2non/imaginary#memory-issues
 ENV MALLOC_ARENA_MAX=2
-ENTRYPOINT ["imaginary", "-return-size", "-max-allowed-resolution", "222.2"]
-
-HEALTHCHECK CMD nc -z localhost "$PORT" || exit 1
-LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/mastercontainer/Dockerfile

@@ -1,28 +1,28 @@
 # Docker CLI is a requirement
-FROM docker:23.0.6-cli as docker
+FROM docker:23.0.1-dind as dind
 
 # Caddy is a requirement
 FROM caddy:2.6.4-alpine as caddy
 
-# From https://github.com/docker-library/php/blob/master/8.2/alpine3.17/fpm/Dockerfile
-FROM php:8.2.6-fpm-alpine3.17
-
-EXPOSE 80
-EXPOSE 8080
-EXPOSE 8443
-
-COPY --from=caddy /usr/bin/caddy /usr/bin/caddy
-COPY --from=docker /usr/local/bin/docker /usr/local/bin/docker
-
-WORKDIR /var/www/docker-aio
+# From https://github.com/docker-library/php/blob/master/8.1/alpine3.17/fpm/Dockerfile
+FROM php:8.1.17-fpm-alpine3.17
 
 RUN set -ex; \
     apk add --no-cache shadow; \
     groupmod -g 333 xfs; \
     usermod -u 333 -g 333 xfs; \
     groupmod -g 33 www-data; \
-    usermod -u 33 -g 33 www-data; \
-    \
+    usermod -u 33 -g 33 www-data
+
+EXPOSE 80
+EXPOSE 8080
+EXPOSE 8443
+
+RUN mkdir -p /var/www/docker-aio;
+
+WORKDIR /var/www/docker-aio
+
+RUN set -ex; \
     apk add --no-cache \
         util-linux-misc \
         ca-certificates \
@@ -36,14 +36,16 @@ RUN set -ex; \
         sudo \
         netcat-openbsd \
         curl \
-        grep; \
-    \
+        grep
+
+RUN set -ex; \
     apk add --no-cache --virtual .build-deps \
         autoconf \
         build-base; \
     pecl install APCu-5.1.22; \
     docker-php-ext-enable apcu; \
     rm -r /tmp/pear; \
+    \
     runDeps="$( \
         scanelf --needed --nobanner --format '%n#p' --recursive /usr/local/lib/php/extensions \
             | tr ',' '\n' \
@@ -55,30 +57,38 @@ RUN set -ex; \
     grep -q '^pm = dynamic' /usr/local/etc/php-fpm.d/www.conf; \
     sed -i 's/^pm = dynamic/pm = ondemand/' /usr/local/etc/php-fpm.d/www.conf; \
     sed -i 's/^pm.max_children =.*/pm.max_children = 80/' /usr/local/etc/php-fpm.d/www.conf; \
-    sed -i 's|access.log = /proc/self/fd/2|access.log = /proc/self/fd/1|' /usr/local/etc/php-fpm.d/docker.conf; \
-    \
+    sed -i 's|access.log = /proc/self/fd/2|access.log = /proc/self/fd/1|' /usr/local/etc/php-fpm.d/docker.conf
+
+COPY --from=caddy /usr/bin/caddy /usr/bin/
+RUN chmod +x /usr/bin/caddy
+
+COPY --from=dind /usr/local/bin/docker /usr/local/bin/
+RUN chmod +x /usr/local/bin/docker
+
+RUN set -e && \
     apk add --no-cache git; \
     wget https://getcomposer.org/installer -O - | php -- --install-dir=/usr/local/bin --filename=composer; \
     chmod +x /usr/local/bin/composer; \
     cd /var/www/docker-aio; \
     git clone https://github.com/nextcloud-releases/all-in-one.git --depth 1 .; \
-    find ./ -not -path ./php -maxdepth 1 -mindepth 1 -delete; \
-    chown www-data:www-data -R /var/www/docker-aio; \
     cd php; \
-    sudo -u www-data composer install --no-dev; \
-    sudo -u www-data composer clear-cache; \
+    composer install --no-dev; \
+    composer clearcache; \
     cd ..; \
     rm -f /usr/local/bin/composer; \
-    chmod -R 770 /var/www/docker-aio; \
-    chown -R www-data:www-data /var/www; \
-    rm -r php/data; \
-    rm -r php/session; \
-    \
-    mkdir -p /etc/apache2/certs; \
-    cd /etc/apache2/certs; \
-    openssl req -new -newkey rsa:4096 -days 3650 -nodes -x509 -subj "/C=DE/ST=BE/L=Local/O=Dev/CN=nextcloud.local" -keyout /etc/apache2/certs/ssl.key -out /etc/apache2/certs/ssl.crt; \
-    \
-    sed -i \
+    chmod 770 -R ./; \
+    chown www-data:www-data -R /var/www; \
+    rm -r ./php/data; \
+    rm -r ./php/session; \
+    apk del --no-cache git
+
+RUN mkdir -p /etc/apache2/certs && \
+    cd /etc/apache2/certs && \
+    openssl req -new -newkey rsa:4096 -days 3650 -nodes -x509 -subj "/C=DE/ST=BE/L=Local/O=Dev/CN=nextcloud.local" -keyout ./ssl.key -out ./ssl.crt;
+
+COPY mastercontainer.conf /etc/apache2/sites-available/
+
+RUN sed -i \
             -e '/^Listen /d' \
             -e 's/User apache/User www-data/g' \
             -e 's/Group apache/Group www-data/g' \
@@ -97,23 +107,35 @@ RUN set -ex; \
         echo "ServerName localhost" | tee -a /etc/apache2/httpd.conf; \
         echo "LoadModule ssl_module modules/mod_ssl.so" | tee -a /etc/apache2/httpd.conf; \
         echo "LoadModule socache_shmcb_module modules/mod_socache_shmcb.so" | tee -a /etc/apache2/httpd.conf; \
-        echo "Include /etc/apache2/sites-available/mastercontainer.conf" | tee -a /etc/apache2/httpd.conf; \
-    \
+        echo "Include /etc/apache2/sites-available/mastercontainer.conf" | tee -a /etc/apache2/httpd.conf
+
+RUN set -ex; \
     rm -f /etc/apache2/conf.d/default.conf \
           /etc/apache2/conf.d/userdir.conf \
-          /etc/apache2/conf.d/info.conf; \
-    \
-    mkdir /var/log/supervisord; \
+          /etc/apache2/conf.d/info.conf
+
+RUN mkdir /var/log/supervisord; \
     mkdir /var/run/supervisord;
 
-COPY --chmod=775 *.sh /
-COPY --chmod=664 Caddyfile /Caddyfile
-COPY --chmod=664 supervisord.conf /supervisord.conf
-COPY mastercontainer.conf /etc/apache2/sites-available/mastercontainer.conf
+COPY Caddyfile /
+COPY start.sh /usr/bin/
+COPY backup-time-file-watcher.sh /
+COPY session-deduplicator.sh /
+COPY cron.sh /
+COPY daily-backup.sh /
+COPY supervisord.conf /
+COPY healthcheck.sh /
+RUN chmod +x /usr/bin/start.sh; \
+    chmod +x /cron.sh; \
+    chmod +x /session-deduplicator.sh; \
+    chmod +x /backup-time-file-watcher.sh; \
+    chmod +x /daily-backup.sh; \
+    chmod a+r /Caddyfile; \
+    chmod +x /healthcheck.sh
 
 USER root
 
-ENTRYPOINT ["/start.sh"]
+ENTRYPOINT ["start.sh"]
 CMD ["/usr/bin/supervisord", "-c", "/supervisord.conf"]
 
 HEALTHCHECK CMD /healthcheck.sh

Containers/mastercontainer/start.sh

@@ -6,12 +6,6 @@ print_green() {
     printf "%b%s%b\n" "\e[0;92m" "$TEXT" "\e[0m"
 }
 
-# Function to show text in red
-print_red() {
-    local TEXT="$1"
-    printf "%b%s%b\n" "\e[0;31m" "$TEXT" "\e[0m"
-}
-
 # Function to check if number was provided
 check_if_number() {
 case "${1}" in
@@ -20,19 +14,12 @@ case "${1}" in
 esac
 }
 
-# Check if running as root user
-if [ "$EUID" != "0" ]; then
-    print_red "Container does not run as root user. This is not supported."
-    exit 1
-fi
-
 # Check if socket is available and readable
 if ! [ -a "/var/run/docker.sock" ]; then
-    print_red "Docker socket is not available. Cannot continue."
-    echo "If you did this by purpose because you don't want the container to have access to the docker socket, see https://github.com/nextcloud/all-in-one/tree/main/manual-install."
+    echo "Docker socket is not available. Cannot continue."
     exit 1
 elif ! mountpoint -q "/mnt/docker-aio-config"; then
-    print_red "/mnt/docker-aio-config is not a mountpoint. Cannot proceed!"
+    echo "/mnt/docker-aio-config is not a mountpoint. Cannot proceed!"
     exit 1
 elif ! sudo -u www-data test -r /var/run/docker.sock; then
     echo "Trying to fix docker.sock permissions internally..."
@@ -53,14 +40,14 @@ elif ! sudo -u www-data test -r /var/run/docker.sock; then
         usermod -aG docker www-data
     fi
     if ! sudo -u www-data test -r /var/run/docker.sock; then
-        print_red "Docker socket is not readable by the www-data user. Cannot continue."
+        echo "Docker socket is not readable by the www-data user. Cannot continue."
         exit 1
     fi
 fi
 
 # Check if api version is supported
 if ! sudo -u www-data docker info &>/dev/null; then
-    print_red "Cannot connect to the docker socket. Cannot proceed."
+    echo "Cannot connect to the docker socket. Cannot proceed."
     exit 1
 fi
 API_VERSION_FILE="$(find ./ -name DockerActionManager.php | head -1)"
@@ -70,7 +57,7 @@ API_VERSION_NUMB="$(echo "$API_VERSION" | sed 's/\.//')"
 LOCAL_API_VERSION_NUMB="$(sudo -u www-data docker version | grep -i "api version" | grep -oP '[0-9]+.[0-9]+' | head -1 | sed 's/\.//')"
 if [ -n "$LOCAL_API_VERSION_NUMB" ] && [ -n "$API_VERSION_NUMB" ]; then
     if ! [ "$LOCAL_API_VERSION_NUMB" -ge "$API_VERSION_NUMB" ]; then
-        print_red "Docker API v$API_VERSION is not supported by your docker engine. Cannot proceed. Please upgrade your docker engine if you want to run Nextcloud AIO!"
+        echo "Docker API v$API_VERSION is not supported by your docker engine. Cannot proceed. Please upgrade your docker engine if you want to run Nextcloud AIO!"
         exit 1
     fi
 else
@@ -91,16 +78,16 @@ fi
 
 # Check if startup command was executed correctly
 if ! sudo -u www-data docker ps --format "{{.Names}}" | grep -q "^nextcloud-aio-mastercontainer$"; then
-    print_red "It seems like you did not give the mastercontainer the correct name? (The 'nextcloud-aio-mastercontainer' container was not found.)
+    echo "It seems like you did not give the mastercontainer the correct name? (The 'nextcloud-aio-mastercontainer' container was not found.)
 Using a different name is not supported since mastercontainer updates will not work in that case!
 If you are on docker swarm and try to run AIO, see https://github.com/nextcloud/all-in-one#can-i-run-this-with-docker-swarm"
     exit 1
 elif ! sudo -u www-data docker volume ls --format "{{.Name}}" | grep -q "^nextcloud_aio_mastercontainer$"; then
-    print_red "It seems like you did not give the mastercontainer volume the correct name? (The 'nextcloud_aio_mastercontainer' volume was not found.)
+    echo "It seems like you did not give the mastercontainer volume the correct name? (The 'nextcloud_aio_mastercontainer' volume was not found.)
 Using a different name is not supported since the built-in backup solution will not work in that case!"
     exit 1
 elif ! sudo -u www-data docker inspect nextcloud-aio-mastercontainer | grep -q "nextcloud_aio_mastercontainer"; then
-    print_red "It seems like you did not attach the 'nextcloud_aio_mastercontainer' volume to the mastercontainer?
+    echo "It seems like you did not attach the 'nextcloud_aio_mastercontainer' volume to the mastercontainer?
 This is not supported since the built-in backup solution will not work in that case!"
     exit 1
 fi
@@ -108,34 +95,34 @@ fi
 # Check for other options
 if [ -n "$NEXTCLOUD_DATADIR" ]; then
     if [ "$NEXTCLOUD_DATADIR" = "nextcloud_aio_nextcloud_datadir" ]; then
-        sleep 1
+        echo "NEXTCLOUD_DATADIR is set to $NEXTCLOUD_DATADIR"
     elif ! echo "$NEXTCLOUD_DATADIR" | grep -q "^/" || [ "$NEXTCLOUD_DATADIR" = "/" ]; then
-        print_red "You've set NEXTCLOUD_DATADIR but not to an allowed value.
-The string must start with '/' and must not be equal to '/'. Also allowed is 'nextcloud_aio_nextcloud_datadir'.
+        echo "You've set NEXTCLOUD_DATADIR but not to an allowed value.
+The string must start with '/' and must not be equal to '/'.
 It is set to '$NEXTCLOUD_DATADIR'."
         exit 1
     fi
 fi
 if [ -n "$NEXTCLOUD_MOUNT" ]; then
     if ! echo "$NEXTCLOUD_MOUNT" | grep -q "^/" || [ "$NEXTCLOUD_MOUNT" = "/" ]; then
-        print_red "You've set NEXCLOUD_MOUNT but not to an allowed value.
+        echo "You've set NEXCLOUD_MOUNT but not to an allowed value.
 The string must start with '/' and must not be equal to '/'.
 It is set to '$NEXTCLOUD_MOUNT'."
         exit 1
     elif [ "$NEXTCLOUD_MOUNT" = "/mnt/ncdata" ] || echo "$NEXTCLOUD_MOUNT" | grep -q "^/mnt/ncdata/"; then
-        print_red "'/mnt/ncdata' and '/mnt/ncdata/' are not allowed as values for NEXTCLOUD_MOUNT."
+        echo "'/mnt/ncdata' and '/mnt/ncdata/' are not allowed as values for NEXTCLOUD_MOUNT."
         exit 1
     fi
 fi
 if [ -n "$NEXTCLOUD_DATADIR" ] && [ -n "$NEXTCLOUD_MOUNT" ]; then
     if [ "$NEXTCLOUD_DATADIR" = "$NEXTCLOUD_MOUNT" ]; then
-        print_red "NEXTCLOUD_DATADIR and NEXTCLOUD_MOUNT are not allowed to be equal."
+        echo "NEXTCLOUD_DATADIR and NEXTCLOUD_MOUNT are not allowed to be equal."
         exit 1
     fi
 fi
 if [ -n "$NEXTCLOUD_UPLOAD_LIMIT" ]; then
     if ! echo "$NEXTCLOUD_UPLOAD_LIMIT" | grep -q '^[0-9]\+G$'; then
-        print_red "You've set NEXTCLOUD_UPLOAD_LIMIT but not to an allowed value.
+        echo "You've set NEXTCLOUD_UPLOAD_LIMIT but not to an allowed value.
 The string must start with a number and end with 'G'.
 It is set to '$NEXTCLOUD_UPLOAD_LIMIT'."
         exit 1
@@ -143,7 +130,7 @@ It is set to '$NEXTCLOUD_UPLOAD_LIMIT'."
 fi
 if [ -n "$NEXTCLOUD_MAX_TIME" ]; then
     if ! echo "$NEXTCLOUD_MAX_TIME" | grep -q '^[0-9]\+$'; then
-        print_red "You've set NEXTCLOUD_MAX_TIME but not to an allowed value.
+        echo "You've set NEXTCLOUD_MAX_TIME but not to an allowed value.
 The string must be a number. E.g. '3600'.
 It is set to '$NEXTCLOUD_MAX_TIME'."
         exit 1
@@ -151,7 +138,7 @@ It is set to '$NEXTCLOUD_MAX_TIME'."
 fi
 if [ -n "$NEXTCLOUD_MEMORY_LIMIT" ]; then
     if ! echo "$NEXTCLOUD_MEMORY_LIMIT" | grep -q '^[0-9]\+M$'; then
-        print_red "You've set NEXTCLOUD_MEMORY_LIMIT but not to an allowed value.
+        echo "You've set NEXTCLOUD_MEMORY_LIMIT but not to an allowed value.
 The string must start with a number and end with 'M'.
 It is set to '$NEXTCLOUD_MEMORY_LIMIT'."
         exit 1
@@ -159,64 +146,64 @@ It is set to '$NEXTCLOUD_MEMORY_LIMIT'."
 fi
 if [ -n "$APACHE_PORT" ]; then
     if ! check_if_number "$APACHE_PORT"; then
-        print_red "You provided an Apache port but did not only use numbers.
+        echo "You provided an Apache port but did not only use numbers.
 It is set to '$APACHE_PORT'."
         exit 1
     elif ! [ "$APACHE_PORT" -le 65535 ] || ! [ "$APACHE_PORT" -ge 1 ]; then
-        print_red "The provided Apache port is invalid. It must be between 1 and 65535"
+        echo "The provided Apache port is invalid. It must be between 1 and 65535"
         exit 1
     fi
 fi
 if [ -n "$APACHE_IP_BINDING" ]; then
     if ! echo "$APACHE_IP_BINDING" | grep -q '^[0-9.]\+$'; then
-        print_red "You provided an ip-address for the apache container's ip-binding but it was not a valid ip-address.
+        echo "You provided an ip-address for the apache container's ip-binding but it was not a valid ip-address.
 It is set to '$APACHE_IP_BINDING'."
         exit 1
     fi
 fi
 if [ -n "$TALK_PORT" ]; then
     if ! check_if_number "$TALK_PORT"; then
-        print_red "You provided an Talk port but did not only use numbers.
+        echo "You provided an Talk port but did not only use numbers.
 It is set to '$TALK_PORT'."
         exit 1
     elif ! [ "$TALK_PORT" -le 65535 ] || ! [ "$TALK_PORT" -ge 1 ]; then
-        print_red "The provided Talk port is invalid. It must be between 1 and 65535"
+        echo "The provided Talk port is invalid. It must be between 1 and 65535"
         exit 1
     fi
 fi
 if [ -n "$APACHE_PORT" ] && [ -n "$TALK_PORT" ]; then
     if [ "$APACHE_PORT" = "$TALK_PORT" ]; then
-        print_red "APACHE_PORT and TALK_PORT are not allowed to be equal."
+        echo "APACHE_PORT and TALK_PORT are not allowed to be equal."
         exit 1
     fi
 fi
-if [ -n "$WATCHTOWER_DOCKER_SOCKET_PATH" ]; then
-    if ! echo "$WATCHTOWER_DOCKER_SOCKET_PATH" | grep -q "^/" || echo "$WATCHTOWER_DOCKER_SOCKET_PATH" | grep -q "/$"; then
-        print_red "You've set WATCHTOWER_DOCKER_SOCKET_PATH but not to an allowed value.
+if [ -n "$DOCKER_SOCKET_PATH" ]; then
+    if ! echo "$DOCKER_SOCKET_PATH" | grep -q "^/" || echo "$DOCKER_SOCKET_PATH" | grep -q "/$"; then
+        echo "You've set DOCKER_SOCKET_PATH but not to an allowed value.
 The string must start with '/' and must not end with '/'.
-It is set to '$WATCHTOWER_DOCKER_SOCKET_PATH'."
+It is set to '$DOCKER_SOCKET_PATH'."
         exit 1
     fi
 fi
 if [ -n "$NEXTCLOUD_TRUSTED_CACERTS_DIR" ]; then
     if ! echo "$NEXTCLOUD_TRUSTED_CACERTS_DIR" | grep -q "^/" || echo "$NEXTCLOUD_TRUSTED_CACERTS_DIR" | grep -q "/$"; then
-        print_red "You've set NEXTCLOUD_TRUSTED_CACERTS_DIR but not to an allowed value.
+        echo "You've set NEXTCLOUD_TRUSTED_CACERTS_DIR but not to an allowed value.
 It should be an absolute path to a directory that starts with '/' but not end with '/'.
 It is set to '$NEXTCLOUD_TRUSTED_CACERTS_DIR '."
         exit 1
     fi
 fi
 if [ -n "$NEXTCLOUD_STARTUP_APPS" ]; then
-    if ! echo "$NEXTCLOUD_STARTUP_APPS" | grep -q "^[a-z0-9 _-]\+$"; then
-        print_red "You've set NEXTCLOUD_STARTUP_APPS but not to an allowed value.
-It needs to be a string. Allowed are small letters a-z, 0-9, spaces, hyphens and '_'.
+    if ! echo "$NEXTCLOUD_STARTUP_APPS" | grep -q "^[a-z _-]\+$"; then
+        echo "You've set NEXTCLOUD_STARTUP_APPS but not to an allowed value.
+It needs to be a string. Allowed are small letters a-z, spaces, hyphens and '_'.
 It is set to '$NEXTCLOUD_STARTUP_APPS'."
         exit 1
     fi
 fi
 if [ -n "$NEXTCLOUD_ADDITIONAL_APKS" ]; then
     if ! echo "$NEXTCLOUD_ADDITIONAL_APKS" | grep -q "^[a-z0-9 ._-]\+$"; then
-        print_red "You've set NEXTCLOUD_ADDITIONAL_APKS but not to an allowed value.
+        echo "You've set NEXTCLOUD_ADDITIONAL_APKS but not to an allowed value.
 It needs to be a string. Allowed are small letters a-z, digits 0-9, spaces, hyphens, dots and '_'.
 It is set to '$NEXTCLOUD_ADDITIONAL_APKS'."
         exit 1
@@ -224,7 +211,7 @@ It is set to '$NEXTCLOUD_ADDITIONAL_APKS'."
 fi
 if [ -n "$NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS" ]; then
     if ! echo "$NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS" | grep -q "^[a-z0-9 ._-]\+$"; then
-        print_red "You've set NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS but not to an allowed value.
+        echo "You've set NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS but not to an allowed value.
 It needs to be a string. Allowed are small letters a-z, digits 0-9, spaces, hyphens, dots and '_'.
 It is set to '$NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS'."
         exit 1
@@ -235,7 +222,7 @@ fi
 # Prevents issues like https://github.com/nextcloud/all-in-one/discussions/565
 curl https://nextcloud.com &>/dev/null
 if [ "$?" = 6 ]; then
-    print_red "Could not resolve the host nextcloud.com."
+    echo "Could not resolve the host nextcloud.com."
     echo "Most likely the DNS resolving does not work."
     echo "You should be able to fix this by following https://dockerlabs.collabnix.com/intermediate/networking/Configuring_DNS.html"
     echo "Apart from that, there has been this: https://github.com/nextcloud/all-in-one/discussions/2065"
@@ -286,7 +273,7 @@ if [ -f ./ssl.crt ] && [ -f ./ssl.key ]; then
     cp "$GENERATED_CERTS/ssl.key" ./
 fi
 
-print_green "Initial startup of Nextcloud All-in-One complete!
+print_green "Initial startup of Nextcloud All In One complete!
 You should be able to open the Nextcloud AIO Interface now on port 8080 of this server!
 E.g. https://internal.ip.of.this.server:8080
 

Containers/nextcloud/Dockerfile

@@ -27,21 +27,32 @@ RUN set -ex; \
     apk add --no-cache --virtual .build-deps \
         $PHPIZE_DEPS \
         autoconf \
+        libtool \
         freetype-dev \
-        gmp-dev \
         icu-dev \
-        imagemagick-dev \
         libevent-dev \
         libjpeg-turbo-dev \
         libmcrypt-dev \
-        libmemcached-dev \
         libpng-dev \
-        libwebp-dev \
+        libmemcached-dev \
         libxml2-dev \
         libzip-dev \
         openldap-dev \
         pcre-dev \
         postgresql-dev \
+        libwebp-dev \
+        gmp-dev \
+        lcms2-dev \
+        fontconfig-dev \
+        freetype-dev \
+        ghostscript-dev \
+        tiff-dev \
+        zlib-dev \
+        imagemagick-dev \
+        libheif-dev \
+        librsvg-dev \
+        libxext-dev \
+        ghostscript-fonts \
     ; \
     \
     docker-php-ext-configure gd --with-freetype --with-jpeg --with-webp; \
@@ -50,14 +61,13 @@ RUN set -ex; \
         bcmath \
         exif \
         gd \
-        gmp \
         intl \
         ldap \
         opcache \
         pcntl \
         pdo_pgsql \
-        sysvsem \
         zip \
+        gmp \
     ; \
     \
 # pecl will claim success even if one install fails, so we need to perform each install separately
@@ -88,8 +98,6 @@ RUN { \
         echo 'opcache.interned_strings_buffer=32'; \
         echo 'opcache.save_comments=1'; \
         echo 'opcache.revalidate_freq=60'; \
-        echo 'opcache.jit=1255'; \
-        echo 'opcache.jit_buffer_size=128M'; \
     } > /usr/local/etc/php/conf.d/opcache-recommended.ini; \
     \
     echo 'apc.enable_cli=1' >> /usr/local/etc/php/conf.d/docker-php-ext-apcu.ini; \
@@ -108,7 +116,7 @@ RUN { \
 
 VOLUME /var/www/html
 
-ENV NEXTCLOUD_VERSION 25.0.7
+ENV NEXTCLOUD_VERSION 25.0.5
 
 RUN set -ex; \
     apk add --no-cache --virtual .fetch-deps \
@@ -205,8 +213,12 @@ RUN set -ex; \
         mawk \
         sudo \
         grep \
-        nodejs \
-        coreutils;
+        coreutils \
+        libjpeg \
+        librsvg \
+        libheif \
+        libpng \
+        ghostscript-fonts;
 
 RUN set -ex; \
     grep -q '^pm = dynamic' /usr/local/etc/php-fpm.d/www.conf; \
@@ -250,11 +262,6 @@ RUN set -ex; \
 
 VOLUME /mnt/ncdata
 
-RUN set -ex; \
-    mkdir -p /nc-updater; \
-    chown -R www-data:www-data /nc-updater; \
-    chmod -R 770 /nc-updater
-
 # Give root a random password
 RUN echo "root:$(openssl rand -base64 12)" | chpasswd
 

Containers/nextcloud/entrypoint.sh

@@ -216,12 +216,6 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
             fi
 
             # We do our own permission check so the permission check is not needed
-            cat << DATADIR_PERMISSION_CONF > /var/www/html/config/datadir.permission.config.php
-<?php
-\$CONFIG = array (
-  'check_data_directory_permissions' => false
-);
-DATADIR_PERMISSION_CONF
             php /var/www/html/occ config:system:set check_data_directory_permissions --value=false --type=bool
 
             # Try to force generation of appdata dir:
@@ -244,43 +238,9 @@ DATADIR_PERMISSION_CONF
                 fi
             fi
 
-            # This autoconfig is not needed anymore and should be able to be overwritten by the user
-            rm /var/www/html/config/datadir.permission.config.php
-
             # unset admin password
             unset ADMIN_PASSWORD
 
-            if [ "$INSTALL_LATEST_MAJOR" = yes ]; then
-                php /var/www/html/occ config:system:set updater.release.channel --value=beta
-                php /var/www/html/occ config:system:set updatedirectory --value="/nc-updater"
-                php /var/www/html/updater/updater.phar --no-interaction
-                php /var/www/html/occ app:enable nextcloud-aio --force
-                if ! php /var/www/html/occ -V || php /var/www/html/occ status | grep maintenance | grep -q 'true'; then
-                    echo "Installation of Nextcloud failed!"
-                    touch "$NEXTCLOUD_DATA_DIR/install.failed"
-                    exit 1
-                fi
-                # shellcheck disable=SC2016
-                installed_version="$(php -r 'require "/var/www/html/version.php"; echo implode(".", $OC_Version);')"
-                INSTALLED_MAJOR="${installed_version%%.*}"
-                IMAGE_MAJOR="${image_version%%.*}"
-                if ! [ "$INSTALLED_MAJOR" -gt "$IMAGE_MAJOR" ]; then
-                    php /var/www/html/occ config:system:set updater.release.channel --value=beta
-                    php /var/www/html/occ config:system:set updatedirectory --value="/nc-updater"
-                    php /var/www/html/updater/updater.phar --no-interaction
-                    if ! php /var/www/html/occ -V || php /var/www/html/occ status | grep maintenance | grep -q 'true'; then
-                        echo "Installation of Nextcloud failed!"
-                        touch "$NEXTCLOUD_DATA_DIR/install.failed"
-                        exit 1
-                    fi
-                fi
-                php /var/www/html/occ config:system:set updater.release.channel --value=stable
-                php /var/www/html/occ db:add-missing-indices
-                php /var/www/html/occ db:add-missing-columns
-                php /var/www/html/occ db:add-missing-primary-keys
-                yes | php /var/www/html/occ db:convert-filecache-bigint
-            fi
-
             # Apply log settings
             echo "Applying default settings..."
             mkdir -p /var/www/html/data
@@ -305,7 +265,6 @@ DATADIR_PERMISSION_CONF
             php /var/www/html/occ config:system:set enabledPreviewProviders 4 --value="OC\\Preview\\TXT"
             php /var/www/html/occ config:system:set enabledPreviewProviders 5 --value="OC\\Preview\\OpenDocument"
             php /var/www/html/occ config:system:set enabledPreviewProviders 6 --value="OC\\Preview\\Movie"
-            php /var/www/html/occ config:system:set enabledPreviewProviders 7 --value="OC\\Preview\\Krita"
             php /var/www/html/occ config:system:set enable_previews --value=true --type=boolean
 
             # Apply other settings
@@ -340,6 +299,11 @@ DATADIR_PERMISSION_CONF
                 done
             fi
 
+            # Set the permission check to its default value again if not set
+            if [ "$SKIP_DATA_DIRECTORY_PERMISSION_CHECK" != yes ]; then
+                php /var/www/html/occ config:system:set check_data_directory_permissions --value=true --type=bool
+            fi
+
         #upgrade
         else
             touch "$NEXTCLOUD_DATA_DIR/update.failed"
@@ -444,7 +408,6 @@ php /var/www/html/occ app:enable support
 echo "Adjusting log files..."
 php /var/www/html/occ config:system:set logfile --value="/var/www/html/data/nextcloud.log"
 php /var/www/html/occ config:app:set admin_audit logfile --value="/var/www/html/data/audit.log"
-php /var/www/html/occ config:system:set updatedirectory --value="/nc-updater"
 
 # Apply network settings
 echo "Applying network settings..."

Containers/onlyoffice/Dockerfile

@@ -1,5 +1,5 @@
 # From https://github.com/ONLYOFFICE/Docker-DocumentServer/blob/master/Dockerfile
-FROM onlyoffice/documentserver:7.3.3.50
+FROM onlyoffice/documentserver:7.3.3.49
 
 HEALTHCHECK CMD nc -z localhost 80 || exit 1
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/postgresql/Dockerfile

@@ -1,35 +1,39 @@
 # From https://github.com/docker-library/postgres/blob/master/15/alpine/Dockerfile
-FROM postgres:15.3-alpine
+FROM postgres:15.2-alpine
 
-COPY --chmod=775 start.sh /start.sh
-COPY --chmod=775 healthcheck.sh /healthcheck.sh
-COPY --chmod=775 init-user-db.sh /docker-entrypoint-initdb.d/init-user-db.sh
+RUN apk add --no-cache bash openssl shadow grep mawk
 
-RUN set -ex; \
-    apk add --no-cache bash openssl shadow grep mawk; \
-    \
 # We need to use the same gid and uid as on old installations
+RUN set -ex; \
     deluser postgres; \
     groupmod -g 9999 ping; \
     addgroup -g 999 -S postgres; \
-    adduser -u 999 -S -D -G postgres -H -h /var/lib/postgresql -s /bin/sh postgres; \
-    apk del --no-cache shadow; \
-    \
+    adduser -u 999 -S -D -G postgres -H -h /var/lib/postgresql -s /bin/sh postgres
+
 # Fix default permissions
+RUN set -ex; \
     chown -R postgres:postgres /var/lib/postgresql; \
     chown -R postgres:postgres /var/run/postgresql; \
-    chown -R postgres:postgres "$PGDATA"; \
-    \
-    mkdir /mnt/data; \
-    chown postgres:postgres /mnt/data; \
-    \
-# Give root a random password
-    echo "root:$(openssl rand -base64 12)" | chpasswd
+    chown -R postgres:postgres "$PGDATA"
+
+COPY start.sh /usr/bin/
+COPY healthcheck.sh /usr/bin/
+COPY init-user-db.sh /docker-entrypoint-initdb.d/
+RUN set -ex; \
+    chmod +x /usr/bin/start.sh; \
+    chmod +xr /docker-entrypoint-initdb.d/init-user-db.sh; \
+    chmod +x /usr/bin/healthcheck.sh
+
+RUN mkdir /mnt/data; \
+    chown postgres:postgres /mnt/data;
 
 VOLUME /mnt/data
 
-USER postgres
-ENTRYPOINT ["/start.sh"]
+# Give root a random password
+RUN echo "root:$(openssl rand -base64 12)" | chpasswd
 
-HEALTHCHECK CMD /healthcheck.sh
+USER postgres
+ENTRYPOINT ["start.sh"]
+
+HEALTHCHECK CMD healthcheck.sh
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/redis/Dockerfile

@@ -1,13 +1,13 @@
 # From https://github.com/docker-library/redis/blob/master/7.0/alpine/Dockerfile
-FROM redis:7.0.11-alpine
+FROM redis:7.0.10-alpine
 
-COPY --chmod=775 start.sh /usr/bin/start.sh
+RUN apk add --no-cache openssl bash
+
+COPY start.sh /usr/bin/
+RUN chmod +x /usr/bin/start.sh
 
-RUN set -ex; \
-    apk add --no-cache openssl bash; \
-    \
 # Give root a random password
-    echo "root:$(openssl rand -base64 12)" | chpasswd
+RUN echo "root:$(openssl rand -base64 12)" | chpasswd
 
 USER redis
 ENTRYPOINT ["start.sh"]

Containers/talk/Dockerfile

@@ -1,19 +1,17 @@
-FROM nats:2.9.16-scratch as nats
+FROM nats:2.9.15-scratch as nats
 FROM strukturag/nextcloud-spreed-signaling:1.1.2 as signaling
-FROM coturn/coturn:4.6.2-r0-alpine
+FROM alpine:3.17.2
 USER root
 
 COPY --from=nats /nats-server /usr/local/bin/nats-server
 COPY --from=signaling /usr/bin/nextcloud-spreed-signaling /usr/local/bin/nextcloud-spreed-signaling
 
-COPY --chmod=775 start.sh /usr/bin/start.sh
-COPY --chmod=664 supervisord.conf /supervisord.conf
-
 RUN set -ex; \
     apk add --no-cache \
         ca-certificates \
         tzdata \
         bash \
+        coturn \
         openssl \
         supervisor \
         bind-tools \
@@ -33,11 +31,15 @@ RUN set -ex; \
         util-linux \
         build-base \
         lua5.3-dev \
-        luarocks5.3; \
-    \
+        luarocks5.3;
+
 # Give root a random password
-    echo "root:$(openssl rand -base64 12)" | chpasswd; \
-    \
+RUN echo "root:$(openssl rand -base64 12)" | chpasswd
+
+COPY --chmod=775 start.sh /usr/bin/start.sh
+COPY --chmod=664 supervisord.conf /supervisord.conf
+
+RUN set -ex; \
     touch \
         /etc/nats.conf \
         /etc/signaling.conf \
@@ -65,5 +67,5 @@ USER talk
 ENTRYPOINT ["start.sh"]
 CMD ["/usr/bin/supervisord", "-c", "/supervisord.conf"]
 
-HEALTHCHECK CMD (nc -z localhost 8081 && nc -z localhost 8188 && nc -z localhost 4222 && nc -z localhost "$TALK_PORT" && nc -z "$NC_DOMAIN" "$TALK_PORT") || exit 1
+HEALTHCHECK CMD (nc -z localhost 8081 && nc -z localhost 8188 && nc -z localhost 4222 && nc -z localhost $TALK_PORT) || exit 1
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

Containers/talk/start.sh

@@ -20,6 +20,7 @@ set +x
 cat << TURN_CONF > "/etc/turnserver.conf"
 listening-port=$TALK_PORT
 fingerprint
+lt-cred-mech
 use-auth-secret
 static-auth-secret=$TURN_SECRET
 realm=$NC_DOMAIN

Containers/watchtower/Dockerfile

@@ -1,12 +1,14 @@
 # From https://github.com/containrrr/watchtower/blob/main/dockerfiles/Dockerfile.self-contained
 FROM containrrr/watchtower:1.5.3 as watchtower
 
-FROM alpine:3.17.3
+FROM alpine:3.17.2
 
 RUN apk add --no-cache bash
-COPY --from=watchtower /watchtower /watchtower
+COPY --from=watchtower /watchtower /
 
-COPY --chmod=775 start.sh /start.sh
+COPY start.sh /
+RUN chmod +x /start.sh
 
+USER root
 ENTRYPOINT ["/start.sh"]
 LABEL com.centurylinklabs.watchtower.monitor-only="true"

app/appinfo/info.xml

@@ -2,9 +2,9 @@
 <info xmlns:xsi= "http://www.w3.org/2001/XMLSchema-instance"
 	  xsi:noNamespaceSchemaLocation="https://apps.nextcloud.com/schema/apps/info.xsd">
 	<id>nextcloud-aio</id>
-	<name>Nextcloud All-in-One</name>
+	<name>Nextcloud All In One</name>
 	<summary>Provides a login link for admins.</summary>
-	<description>Add a link to the admin settings that gives access to the Nextcloud All-in-One admin interface</description>
+	<description>Add a link to the admin settings that gives access to the Nextcloud All In One admin interface</description>
 	<version>0.3.0</version>
 	<licence>agpl</licence>
 	<author>Azul</author>

app/templates/admin.php

@@ -10,7 +10,6 @@ declare(strict_types=1);
  */
 	/** @var array $_ */ ?>
 <div id="allinone" class="section">
-	<h2><?php p($l->t('Nextcloud All-in-One'));?></h2>
-	<a href="<?php p($_['AIOLoginUrl']);?>" class="button" target="_blank" rel="noopener">Open Nextcloud AIO Interface ↗</a><br><br>
-	<p><a href="https://github.com/nextcloud/all-in-one#how-to-easily-log-in-to-the-aio-interface">Click here for more infos on this feature (e.g. also on how to change the link in the button)</a></p>
+	<h2><?php p($l->t('Nextcloud All In One'));?></h2>
+	<a href="<?php p($_['AIOLoginUrl']);?>" class="button" target="_blank" rel="noopener">Open Nextcloud AIO Interface ↗</a>
 </div>

develop.md

@@ -22,8 +22,6 @@ Simply use https://github.com/nextcloud/all-in-one/issues/180 as template.
 Go to https://github.com/nextcloud-releases/all-in-one/actions/workflows/repo-sync.yml and run the workflow that will first sync the repo and then build new container that automatically get published to `develop` and `develop-arm64`.
 
 ## How to test things correctly?
-Before testing, make sure that at least the amd64 containers are built successfully by checking the last workflow here: https://github.com/nextcloud-releases/all-in-one/actions/workflows/build_images.yml. 
-
 There is a testing-VM available for the maintainer of AIO that allows for some final testing before releasing new version. See [this](https://cloud.nextcloud.com/apps/collectives/Nextcloud%20Handbook/Technical/AIO%20testing%20VM?fileId=6350152) for details.
 
 ## How to promote builds from develop to beta

docker-compose.yml

@@ -2,25 +2,26 @@ version: "3.8"
 
 volumes:
   nextcloud_aio_mastercontainer:
-    name: nextcloud_aio_mastercontainer # This line is not allowed to be changed as otherwise the built-in backup solution will not work
+    name: nextcloud_aio_mastercontainer # This line is not allowed to be changed
 
 services:
   nextcloud:
     image: nextcloud/all-in-one:latest
     restart: always
-    container_name: nextcloud-aio-mastercontainer # This line is not allowed to be changed as otherwise AIO will not work correctly
+    container_name: nextcloud-aio-mastercontainer # This line is not allowed to be changed
     volumes:
-      - nextcloud_aio_mastercontainer:/mnt/docker-aio-config # This line is not allowed to be changed as otherwise the built-in backup solution will not work
-      - /var/run/docker.sock:/var/run/docker.sock:ro # May be changed on macOS, Windows or docker rootless. See the applicable documentation. If adjusting, don't forget to also set 'WATCHTOWER_DOCKER_SOCKET_PATH'!
+      - nextcloud_aio_mastercontainer:/mnt/docker-aio-config # This line is not allowed to be changed
+      - /var/run/docker.sock:/var/run/docker.sock:ro # May be changed on macOS, Windows or docker rootless. See the applicable documentation. If adjusting, don't forget to also set 'DOCKER_SOCKET_PATH'!
     ports:
       - 80:80 # Can be removed when running behind a web server or reverse proxy (like Apache, Nginx and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
       - 8080:8080
       - 8443:8443 # Can be removed when running behind a web server or reverse proxy (like Apache, Nginx and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
     # environment: # Is needed when using any of the options below
-      # - AIO_DISABLE_BACKUP_SECTION=false # Setting this to true allows to hide the backup section in the AIO interface.
       # - APACHE_PORT=11000 # Is needed when running behind a web server or reverse proxy (like Apache, Nginx and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
       # - APACHE_IP_BINDING=127.0.0.1 # Should be set when running behind a web server or reverse proxy (like Apache, Nginx and else) that is running on the same host. See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
       # - COLLABORA_SECCOMP_DISABLED=false # Setting this to true allows to disable Collabora's Seccomp feature. See https://github.com/nextcloud/all-in-one#how-to-disable-collaboras-seccomp-feature
+      # - DOCKER_SOCKET_PATH=/var/run/docker.sock # Needs to be specified if the docker socket on the host is not located in the default '/var/run/docker.sock'. Otherwise mastercontainer updates will fail. For macos it needs to be '/var/run/docker.sock'
+      # - DISABLE_BACKUP_SECTION=false # Setting this to true allows to hide the backup section in the AIO interface.
       # - NEXTCLOUD_DATADIR=/mnt/ncdata # Allows to set the host directory for Nextcloud's datadir. See https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir
       # - NEXTCLOUD_MOUNT=/mnt/ # Allows the Nextcloud container to access the chosen directory on the host. See https://github.com/nextcloud/all-in-one#how-to-allow-the-nextcloud-container-to-access-directories-on-the-host
       # - NEXTCLOUD_UPLOAD_LIMIT=10G # Can be adjusted if you need more. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-upload-limit-for-nextcloud
@@ -32,9 +33,6 @@ services:
       # - NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=imagick # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value. See https://github.com/nextcloud/all-in-one#how-to-add-php-extensions-permanently-to-the-nextcloud-container
       # - NEXTCLOUD_ENABLE_DRI_DEVICE=true # This allows to enable the /dev/dri device in the Nextcloud container which is needed for hardware-transcoding. See https://github.com/nextcloud/all-in-one#how-to-enable-hardware-transcoding-for-nextcloud
       # - TALK_PORT=3478 # This allows to adjust the port that the talk container is using.
-      # - WATCHTOWER_DOCKER_SOCKET_PATH=/var/run/docker.sock # Needs to be specified if the docker socket on the host is not located in the default '/var/run/docker.sock'. Otherwise mastercontainer updates will fail. For macos it needs to be '/var/run/docker.sock'
-    # networks: # Is needed when you want to create the nextcloud-aio network with ipv6-support using this file, see the network config at the bottom of the file
-      # - nextcloud-aio # Is needed when you want to create the nextcloud-aio network with ipv6-support using this file, see the network config at the bottom of the file
 
   # # Optional: Caddy reverse proxy. See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
   # # You can find further examples here: https://github.com/nextcloud/all-in-one/discussions/588
@@ -49,16 +47,3 @@ services:
   #     - ./data:/data
   #     - ./sites:/srv
   #   network_mode: "host"
-
-# # Optional: If you need ipv6, follow step 1 and 2 of https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md first and then uncomment the below config in order to activate ipv6 for the internal nextcloud-aio network.
-# # Please make sure to uncomment also the networking lines of the mastercontainer above in order to actually create the network with docker-compose
-# # Inspired by https://github.com/mailcow/mailcow-dockerized/blob/master/docker-compose.yml
-# networks:
-#   nextcloud-aio:
-#     name: nextcloud-aio # This line is not allowed to be changed as otherwise the created network will not be used by the other containers of AIO
-#     driver: bridge
-#     enable_ipv6: true
-#     ipam:
-#       driver: default
-#       config:
-#         - subnet: fd12:3456:789a:2::/64 # IPv6 subnet to use

docker-ipv6-support.md

@@ -1,45 +0,0 @@
-# IPv6-Support for Docker
-
-Before enabling IPv6-Support for Docker, please note that there are still some unresolved problems in regards to IPv6-Support in Docker. See https://github.com/nextcloud/all-in-one/discussions/2557 for more details on this.
-
-Now that this was mentioned, see the instructions below on how to enable IPv6 for Docker.
-
-## Docker on Linux and Docker-rootless
-1.  Edit `/etc/docker/daemon.json` (or `~/.config/docker/daemon.json` in case of docker-rootless), set the `ipv6` key to `true` and the `fixed-cidr-v6` key to your IPv6 subnet. In this example we are setting it to `fd12:3456:789a:1::/64`. Additionally set `experimental` to `true` and `ip6tables` to `true` as well. If you are using mailcow and enabled IPv6 with the update.sh, you can keep their daemon.json, it will work too.
-
-    ```json
-    {
-      "ipv6": true,
-      "fixed-cidr-v6": "fd12:3456:789a:1::/64",
-      "experimental": true,
-      "ip6tables": true
-    }
-    ```
-
-    Save the file.
-
-2.  Reload the Docker configuration file.
-
-    ```console
-    sudo systemctl restart docker
-    ```
-3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create --subnet="fd12:3456:789a:2::/64" --driver bridge --ipv6 nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/2045 in order to recreate the network and enable ipv6 for it.
-
-## Docker Desktop (Windows and macOS)
-On Windows and macOS which use Docker Desktop, you need to go into the settings, and select `Docker Engine`. There you should see the currently used daemon.json file. 
-
-1. You need to now adjust this json file by setting the `ipv6` key to `true` and the `fixed-cidr-v6` key to your IPv6 subnet. In this example we are setting it to `fd12:3456:789a:1::/64`. Additionally set `experimental` to `true` and `ip6tables` to `true` as well.
-
-    ```
-    "ipv6": true,
-    "fixed-cidr-v6": "fd12:3456:789a:1::/64",
-    "experimental": true,
-    "ip6tables": true
-    ```
-
-2. Add these values to the json and make sure to keep the other currently values and that you don't see `Unexpected token in JSON at position ...` before attempting to restart by clicking on `Apply & restart`.
-3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `docker network inspect nextcloud-aio`. On a new instance, this command should return that it did not find a network with this name. Then you can run `docker network create --subnet="fd12:3456:789a:2::/64" --driver bridge --ipv6 nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/2045 in order to recreate the network and enable ipv6 for it.
-
----
-
-**Note**: This is a copy of the original docker docs at https://docs.docker.com/config/daemon/ipv6/ which apparently are not correct. However experimental is set to true which the ip6tables feature needs. Thus it will not get included into the official docs. However it is needed to make it work in our testing.

docker-rootless.md

@@ -4,11 +4,11 @@ You can run AIO with docker rootless by following the steps below.
 
 0. If docker is already installed, you should consider disabling it first: (`sudo systemctl disable --now docker.service docker.socket`)
 1. Install docker rootless by following the official documentation: https://docs.docker.com/engine/security/rootless/#install. The easiest way is installing it **Without packages** (`curl -fsSL https://get.docker.com/rootless | sh`). Further limitations, distribution specific hints, etc. are discussed on the same site. Also do not forget to enable the systemd service, which may not be enabled always by default. See https://docs.docker.com/engine/security/rootless/#usage. (`systemctl --user enable docker`)
-1. If you need ipv6 support, you should enable it by following https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md.
+1. If you need ipv6 support, you should enable it by following https://docs.docker.com/config/daemon/ipv6/. The daemon.json file is most likely stored in `~/.config/docker/daemon.json`.
 1. Do not forget to set the mentioned environmental variables and in best case add them to your `~/.bashrc` file as shown!
 1. Also do not forget to run `loginctl enable-linger USERNAME` (and substitute USERNAME with the correct one) in order to make sure that user services are automatically started after every reboot.
 1. Expose the privileged ports by following https://docs.docker.com/engine/security/rootless/#exposing-privileged-ports. (`sudo setcap cap_net_bind_service=ep $(which rootlesskit); systemctl --user restart docker`)
-1. Use the official AIO startup command but use `--volume $XDG_RUNTIME_DIR/docker.sock:/var/run/docker.sock:ro` instead of `--volume /var/run/docker.sock:/var/run/docker.sock:ro` and also add `--env WATCHTOWER_DOCKER_SOCKET_PATH=$XDG_RUNTIME_DIR/docker.sock` to the initial container startup (which is needed for mastercontainer updates to work correctly).
+1. Use the official AIO startup command but use `--volume $XDG_RUNTIME_DIR/docker.sock:/var/run/docker.sock:ro` instead of `--volume /var/run/docker.sock:/var/run/docker.sock:ro` and also add `-e DOCKER_SOCKET_PATH=$XDG_RUNTIME_DIR/docker.sock` to the initial container startup (which is needed for mastercontainer updates to work correctly).
 1. Now everything should work like without docker rootless. You can consider using docker-compose for this or running it behind a reverse proxy. Basically the only thing that needs to be adjusted always in the startup command or docker-compose file (after installing docker rootles) are things that are mentioned in point 3.
 
 **Please note:** All files outside the containers get created, written to and accessed as the user that is running the docker daemon or a subuid of it. So for the built-in backup to work you need to allow this user to write to the target directory. E.g. with `sudo chown -R USERNAME:GROUPNAME /mnt/backup`. The same applies when changing Nextcloud's datadir. E.g. `sudo chown -R USERNAME:GROUPNAME /mnt/ncdata`. When you want to use the NEXTCLOUD_MOUNT option for local external storage, you need to adjust the permissions of the chosen folders to be accessible/writeable by the userid `100032:100032` (if running `grep ^$(whoami): /etc/subuid` as the user that is running the docker daemon returns 100000 as first value). 

helm-chart/Chart.yaml

@@ -0,0 +1,9 @@
+name: Nextcloud AIO Helm Chart
+description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
+version: 4.6.2
+apiVersion: v2
+keywords:
+  - latest
+sources:
+  - https://github.com/nextcloud/all-in-one/tree/main/helm-chart
+home: https://github.com/nextcloud/all-in-one/tree/main/helm-chart

helm-chart/readme.md

@@ -0,0 +1,3 @@
+# You can also install the AIO containers on Kubernetes using this Helm Chart
+
+This is currently beta and not ready yet.

helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -54,7 +54,7 @@ spec:
               value: nextcloud-aio-talk
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-apache:20230511_075831-latest
+          image: nextcloud/aio-apache:20230315_112022-latest
           name: nextcloud-aio-apache
           ports:
             - containerPort: {{ .Values.APACHE_PORT }}

helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -38,7 +38,7 @@ spec:
               value: "90"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-clamav:20230511_075831-latest
+          image: nextcloud/aio-clamav:20230315_112022-latest
           name: nextcloud-aio-clamav
           ports:
             - containerPort: 3310

helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -34,8 +34,6 @@ spec:
               mountPath: /nextcloud-aio-collabora-fonts
       containers:
         - env:
-            - name: DONT_GEN_SSL_CERT
-              value: "1"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
             - name: aliasgroup1
@@ -46,7 +44,7 @@ spec:
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true {{ .Values.COLLABORA_SECCOMP_POLICY }} --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: nextcloud/aio-collabora:20230511_075831-latest
+          image: nextcloud/aio-collabora:20230315_112022-latest
           name: nextcloud-aio-collabora
           ports:
             - containerPort: 9980

helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -22,25 +22,11 @@ spec:
         io.kompose.service: nextcloud-aio-database
     spec:
       initContainers:
-        - name: init-subpath
-          image: alpine
-          command:
-            - mkdir
-            - "-p"
-            - /nextcloud-aio-database/data
-            - /nextcloud-aio-database
-            - /nextcloud-aio-database-dump
-          volumeMounts:
-            - name: nextcloud-aio-database-dump
-              mountPath: /nextcloud-aio-database-dump
-            - name: nextcloud-aio-database
-              mountPath: /nextcloud-aio-database
         - name: init-volumes
           image: alpine
           command:
             - chown
             - 999:999
-            - "-R"
             - /nextcloud-aio-database
             - /nextcloud-aio-database-dump
           volumeMounts:
@@ -60,13 +46,12 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-postgresql:20230511_075831-latest
+          image: nextcloud/aio-postgresql:20230315_112022-latest
           name: nextcloud-aio-database
           ports:
             - containerPort: 5432
           volumeMounts:
             - mountPath: /var/lib/postgresql/data
-              subPath: data
               name: nextcloud-aio-database
             - mountPath: /mnt/data
               name: nextcloud-aio-database-dump

helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: discovery.type
               value: single-node
-          image: nextcloud/aio-fulltextsearch:20230511_075831-latest
+          image: nextcloud/aio-fulltextsearch:20230315_112022-latest
           name: nextcloud-aio-fulltextsearch
           ports:
             - containerPort: 9200

helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -26,7 +26,7 @@ spec:
         - env:
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-imaginary:20230511_075831-latest
+          image: nextcloud/aio-imaginary:20230315_112022-latest
           name: nextcloud-aio-imaginary
           ports:
             - containerPort: 9000

helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -64,8 +64,6 @@ spec:
               value: "{{ .Values.IMAGINARY_ENABLED }}"
             - name: IMAGINARY_HOST
               value: nextcloud-aio-imaginary
-            - name: INSTALL_LATEST_MAJOR
-              value: "{{ .Values.INSTALL_LATEST_MAJOR }}"
             - name: NC_DOMAIN
               value: "{{ .Values.NC_DOMAIN }}"
             - name: NEXTCLOUD_DATA_DIR
@@ -100,6 +98,8 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: SIGNALING_SECRET
               value: "{{ .Values.SIGNALING_SECRET }}"
+            - name: SKIP_DATA_DIRECTORY_PERMISSION_CHECK
+              value: "{{ .Values.SKIP_DATA_DIRECTORY_PERMISSION_CHECK }}"
             - name: STARTUP_APPS
               value: "{{ .Values.NEXTCLOUD_STARTUP_APPS }}"
             - name: TALK_ENABLED
@@ -114,7 +114,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: UPDATE_NEXTCLOUD_APPS
               value: "{{ .Values.UPDATE_NEXTCLOUD_APPS }}"
-          image: nextcloud/aio-nextcloud:20230511_075831-latest
+          image: nextcloud/aio-nextcloud:20230315_112022-latest
           name: nextcloud-aio-nextcloud
           ports:
             - containerPort: 9000

helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-onlyoffice:20230511_075831-latest
+          image: nextcloud/aio-onlyoffice:20230315_112022-latest
           name: nextcloud-aio-onlyoffice
           ports:
             - containerPort: 80

helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -37,7 +37,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-redis:20230511_075831-latest
+          image: nextcloud/aio-redis:20230315_112022-latest
           name: nextcloud-aio-redis
           ports:
             - containerPort: 6379

helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -34,7 +34,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk:20230511_075831-latest
+          image: nextcloud/aio-talk:20230315_112022-latest
           name: nextcloud-aio-talk
           ports:
             - containerPort: {{ .Values.TALK_PORT }}

helm-chart/update-helm.sh

@@ -2,9 +2,6 @@
 
 DOCKER_TAG="$1"
 
-# The logic needs the files in ./helm-chart
-mv ./nextcloud-aio-helm-chart ./helm-chart
-
 # Clean
 rm -f ./helm-chart/values.yaml
 rm -rf ./helm-chart/templates
@@ -32,7 +29,6 @@ sed -i "s|\${TALK_PORT}:\${TALK_PORT}/|$TALK_PORT:$TALK_PORT/|g" latest.yml
 sed -i "s|- \${APACHE_PORT}|- $APACHE_PORT|" latest.yml
 sed -i "s|- \${TALK_PORT}|- $TALK_PORT|" latest.yml
 sed -i "s|\${NEXTCLOUD_DATADIR}|$NEXTCLOUD_DATADIR|" latest.yml
-sed -i "/name: nextcloud-aio/,$ d" latest.yml
 sed -i "/NEXTCLOUD_DATADIR/d" latest.yml
 sed -i "/\${NEXTCLOUD_MOUNT}/d" latest.yml
 sed -i "/^volumes:/a\ \ nextcloud_aio_nextcloud_trusted_cacerts:\n \ \ \ \ name: nextcloud_aio_nextcloud_trusted_cacerts" latest.yml
@@ -57,19 +53,11 @@ cat << EOL > /tmp/initcontainers
 EOL
 cat << EOL > /tmp/initcontainers.database
       initContainers:
-        - name: init-subpath
-          image: alpine
-          command:
-            - mkdir
-            - "-p"
-            - /nextcloud-aio-database/data
-          volumeMountsInitContainer:
         - name: init-volumes
           image: alpine
           command:
             - chown
             - 999:999
-            - "-R"
           volumeMountsInitContainer:
 EOL
 # shellcheck disable=SC1083
@@ -89,11 +77,6 @@ for variable in "${DEPLOYMENTS[@]}"; do
             if [ "$volumeName" != "nextcloud-aio-nextcloud-data" ]; then
                 sed -i "/^.*volumeMountsInitContainer:/i\ \ \ \ \ \ \ \ \ \ \ \ - /$volumeName" "$variable"
                 sed -i "/volumeMountsInitContainer:/a\ \ \ \ \ \ \ \ \ \ \ \ - name: $volumeName\n\ \ \ \ \ \ \ \ \ \ \ \ \ \ mountPath: /$volumeName" "$variable"
-                # Workaround for the database volume
-                if [ "$volumeName" = nextcloud-aio-database ]; then
-                    sed -i "/mountPath: \/var\/lib\/postgresql\/data/a\ \ \ \ \ \ \ \ \ \ \ \ \ \ subPath: data" "$variable"
-                fi
-                
             fi
         done
         sed -i "s|volumeMountsInitContainer|volumeMounts|" "$variable"
@@ -188,11 +171,9 @@ sed -i 's|= |: |' /tmp/sample.conf
 sed -i '/^NEXTCLOUD_DATADIR/d' /tmp/sample.conf
 sed -i '/^APACHE_IP_BINDING/d' /tmp/sample.conf
 sed -i '/^NEXTCLOUD_MOUNT/d' /tmp/sample.conf
-sed -i '/^IPV6_NETWORK/d' /tmp/sample.conf
 sed -i '/_ENABLED.*/s/ yes / "yes" /' /tmp/sample.conf
 sed -i '/_ENABLED.*/s/ no / "no" /' /tmp/sample.conf
 sed -i 's|^NEXTCLOUD_TRUSTED_CACERTS_DIR: .*|NEXTCLOUD_TRUSTED_CACERTS_DIR:        # Setting this to any value allows to automatically import root certificates into the Nextcloud container|' /tmp/sample.conf
-sed -i 's|10737418240|"10737418240"|' /tmp/sample.conf
 # shellcheck disable=SC2129
 echo 'STORAGE_CLASS:        # By setting this, you can adjust the storage class for your volumes' >> /tmp/sample.conf
 for variable in "${VOLUME_VARIABLE[@]}"; do
@@ -218,9 +199,4 @@ done
 
 chmod 777 -R ./
 
-# Seems like the dir needs to match the name of the chart
-cd ../
-rm -rf ./nextcloud-aio-helm-chart
-mv ./helm-chart ./nextcloud-aio-helm-chart
-
 set +ex

helm-chart/values.yaml

@@ -1,6 +1,6 @@
 AIO_TOKEN: 123456          # Has no function but needs to be set!
 AIO_URL: localhost          # Has no function but needs to be set!
-APACHE_MAX_SIZE: "10737418240"          # This needs to be an integer and in sync with NEXTCLOUD_UPLOAD_LIMIT
+APACHE_MAX_SIZE: 10737418240          # This needs to be an integer and in sync with NEXTCLOUD_UPLOAD_LIMIT
 APACHE_PORT: 443          # Changing this to a different value than 443 will allow you to run it behind a web server or reverse proxy (like Apache, Nginx and else).
 CLAMAV_ENABLED: "no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
 COLLABORA_DICTIONARIES: de_DE en_GB en_US es_ES fr_FR it nl pt_BR pt_PT ru        # You can change this in order to enable other dictionaries for collabora
@@ -9,7 +9,6 @@ COLLABORA_SECCOMP_POLICY: --o:security.seccomp=true          # Changing the valu
 DATABASE_PASSWORD:           # TODO! This needs to be a unique and good password!
 FULLTEXTSEARCH_ENABLED: "no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
 IMAGINARY_ENABLED: "no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
-INSTALL_LATEST_MAJOR: no        # Setting this to yes will install the latest Major Nextcloud version upon the first installation
 NC_DOMAIN: yourdomain.com          # TODO! Needs to be changed to the domain that you want to use for Nextcloud.
 NEXTCLOUD_ADDITIONAL_APKS: imagemagick        # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value.
 NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS: imagick        # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value.
@@ -23,6 +22,7 @@ ONLYOFFICE_ENABLED: "no"          # Setting this to "yes" (with quotes) enables
 ONLYOFFICE_SECRET:           # TODO! This needs to be a unique and good password!
 REDIS_PASSWORD:           # TODO! This needs to be a unique and good password!
 SIGNALING_SECRET:           # TODO! This needs to be a unique and good password!
+SKIP_DATA_DIRECTORY_PERMISSION_CHECK: no          # When setting to yes (with quotes), it will skip the datadir permission check upon the initial Nextcloud installation.
 TALK_ENABLED: "no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
 TALK_PORT: 3478          # This allows to adjust the port that the talk container is using.
 TIMEZONE: Europe/Berlin          # TODO! This is the timezone that your containers will use.

local-instance.md

@@ -5,8 +5,8 @@ It is possible due to several reasons that you do not want or cannot open Nextcl
 The recommended way is the following:
 1. Set up your domain correctly to point to your home network
 1. Set up a reverse proxy by following the [reverse proxy documentation](./reverse-proxy.md) but only open port 80 (which is needed for the ACME challenge to work - however no real traffic will use this port).
-1. Set up a local DNS-server like a pi-hole and configure it to be your local DNS-server for the whole network. Then in the Pi-hole interface, add a custom DNS-record for your domain and overwrite the A-record (and possibly the AAAA-record, too) to point to the private ip-address of your reverse proxy (see https://github.com/nextcloud/all-in-one#how-can-i-access-nextcloud-locally)
-1. Enter the ip-address of your local dns-server in the deamon.json file for docker so that you are sure that all docker containers use the correct local dns-server.
+1. Set up a local DNS-server like a pi-hole and configure it to be your local DNS-server for the whole network. Then in the Pi-hole interface, add a custom DNS-record for your domain and overwrite the A-record (and possibly the AAAA-record, too) to point to the local ip-address of your reverse proxy (see https://github.com/nextcloud/all-in-one#how-can-i-access-nextcloud-locally)
+1. Enter the the ip-address of your local dns-server in the deamon.json file for docker so that you are sure that all docker containers use the correct local dns-server.
 1. Now, entering the domain in the AIO-interface should work as expected and should allow you to continue with the setup
 
 ## 2. Use the ACME DNS-challenge

manual-install/latest.yml

@@ -44,7 +44,6 @@ services:
     restart: unless-stopped
     networks:
       - nextcloud-aio
-    shm_size: 268435456
 
   nextcloud-aio-nextcloud:
     depends_on:
@@ -102,7 +101,7 @@ services:
       - STARTUP_APPS=${NEXTCLOUD_STARTUP_APPS}
       - ADDITIONAL_APKS=${NEXTCLOUD_ADDITIONAL_APKS}
       - ADDITIONAL_PHP_EXTENSIONS=${NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS}
-      - INSTALL_LATEST_MAJOR=${INSTALL_LATEST_MAJOR}
+      - SKIP_DATA_DIRECTORY_PERMISSION_CHECK=${SKIP_DATA_DIRECTORY_PERMISSION_CHECK}
     restart: unless-stopped
     networks:
       - nextcloud-aio
@@ -131,7 +130,6 @@ services:
       - dictionaries=${COLLABORA_DICTIONARIES}
       - TZ=${TIMEZONE}
       - server_name=${NC_DOMAIN}
-      - DONT_GEN_SSL_CERT=1
     volumes:
       - nextcloud_aio_collabora_fonts:/opt/cool/systemplate/tmpfonts:rw
     restart: unless-stopped
@@ -237,13 +235,5 @@ volumes:
   nextcloud_aio_nextcloud_data:
     name: nextcloud_aio_nextcloud_data
 
-# Inspired by https://github.com/mailcow/mailcow-dockerized/blob/master/docker-compose.yml
 networks:
   nextcloud-aio:
-    name: nextcloud-aio
-    driver: bridge
-    enable_ipv6: true
-    ipam:
-      driver: default
-      config:
-        - subnet: ${IPV6_NETWORK}

manual-install/readme.md

@@ -11,7 +11,7 @@ You can run the containers that are build for AIO with docker-compose. This come
 - You lose the AIO interface
 - You lose update notifications and automatic updates
 - You lose all AIO backup and restore features
-- **You need to know what you are doing, especially when modifying the docker-compose file**
+- You need to know what you are doing, especially when modifying the docker-compose file
 - For updating, you need to strictly follow the at the bottom described update routine
 - Probably more
 
@@ -37,7 +37,7 @@ Since the AIO containers may change in the future, it is highly recommended to s
 1. If your previous copy of `sample.conf` is named `my.conf`, run `mv my.conf .env` in order to rename the file to `.env`.
 1. Run `sudo docker-compose down` to stop all running containers
 1. Back up all important files and folders
-1. Run `git pull` in order to get the updated yaml files from the repository. Now bring your `docker-compose.yml` file up-to-date with the updated one from the repository. You can use `diff docker-compose.yml latest.yml` for comparing. ⚠️ **Please note**: Starting with AIO v5.1.0, ipv6 networking will be enabled by default, so make sure to either enable it first by following steps 1 and 2 of https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md and then proceed with the steps below or disable ipv6 networking by editing the docker-compose file and removing ipv6 from the network.
+1. Run `git pull` in order to get the updated yaml files from the repository. Now bring your `docker-compose.yml` file up-to-date with the updated one from the repository. You can use `diff docker-compose.yml latest.yml` for comparing.
 1. Also have a look at the `sample.conf` if any variable was added or renamed and add that to your conf file as well. Here may help the diff command as well.
 1. After the file update was successful, simply run `sudo docker-compose pull` to pull the new images.
 1. At the end run `sudo docker-compose up` in order to start and update the containers with the new configuration.

manual-install/sample.conf

@@ -10,7 +10,6 @@ COLLABORA_SECCOMP_POLICY=--o:security.seccomp=true          # Changing the value
 DATABASE_PASSWORD=          # TODO! This needs to be a unique and good password!
 FULLTEXTSEARCH_ENABLED="no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
 IMAGINARY_ENABLED="no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
-INSTALL_LATEST_MAJOR=no        # Setting this to yes will install the latest Major Nextcloud version upon the first installation
 NC_DOMAIN=yourdomain.com          # TODO! Needs to be changed to the domain that you want to use for Nextcloud.
 NEXTCLOUD_ADDITIONAL_APKS=imagemagick        # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value.
 NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=imagick        # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value.
@@ -26,9 +25,9 @@ ONLYOFFICE_ENABLED="no"          # Setting this to "yes" (with quotes) enables t
 ONLYOFFICE_SECRET=          # TODO! This needs to be a unique and good password!
 REDIS_PASSWORD=          # TODO! This needs to be a unique and good password!
 SIGNALING_SECRET=          # TODO! This needs to be a unique and good password!
+SKIP_DATA_DIRECTORY_PERMISSION_CHECK="no"          # When setting to "yes" (with quotes), it will skip the datadir permission check upon the initial Nextcloud installation.
 TALK_ENABLED="no"          # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.
 TALK_PORT=3478          # This allows to adjust the port that the talk container is using.
 TIMEZONE=Europe/Berlin          # TODO! This is the timezone that your containers will use.
 TURN_SECRET=          # TODO! This needs to be a unique and good password!
 UPDATE_NEXTCLOUD_APPS="no"          # When setting to "yes" (with quotes), it will automatically update all installed Nextcloud apps upon container startup on saturdays.
-IPV6_NETWORK=fd12:3456:789a:2::/64 # IPv6 subnet to use

manual-install/update-yaml.sh

@@ -15,7 +15,6 @@ OUTPUT="$(cat /tmp/containers.json)"
 OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[].internal_port)')"
 OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[].secrets)')"
 OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[].devices)')"
-OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[].backup_volumes)')"
 OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[] | select(.container_name == "nextcloud-aio-watchtower"))')"
 OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[] | select(.container_name == "nextcloud-aio-domaincheck"))')"
 OUTPUT="$(echo "$OUTPUT" | jq 'del(.services[] | select(.container_name == "nextcloud-aio-borgbackup"))')"
@@ -72,6 +71,7 @@ sed -i 's|APACHE_MAX_SIZE=|APACHE_MAX_SIZE=10737418240          # This needs to
 sed -i 's|NEXTCLOUD_MAX_TIME=|NEXTCLOUD_MAX_TIME=3600          # This allows to change the upload time limit of the Nextcloud container|' sample.conf
 sed -i 's|NEXTCLOUD_TRUSTED_CACERTS_DIR=|NEXTCLOUD_TRUSTED_CACERTS_DIR=/usr/local/share/ca-certificates/my-custom-ca          # Nextcloud container will trust all the Certification Authorities, whose certificates are included in the given directory.|' sample.conf
 sed -i 's|UPDATE_NEXTCLOUD_APPS=|UPDATE_NEXTCLOUD_APPS="no"          # When setting to "yes" (with quotes), it will automatically update all installed Nextcloud apps upon container startup on saturdays.|' sample.conf
+sed -i 's|SKIP_DATA_DIRECTORY_PERMISSION_CHECK=|SKIP_DATA_DIRECTORY_PERMISSION_CHECK="no"          # When setting to "yes" (with quotes), it will skip the datadir permission check upon the initial Nextcloud installation.|' sample.conf
 sed -i 's|APACHE_PORT=|APACHE_PORT=443          # Changing this to a different value than 443 will allow you to run it behind a web server or reverse proxy (like Apache, Nginx and else).|' sample.conf
 sed -i 's|APACHE_IP_BINDING=|APACHE_IP_BINDING=0.0.0.0          # This can be changed to e.g. 127.0.0.1 if you want to run AIO behind a web server or reverse proxy (like Apache, Nginx and else) and if that is running on the same host and using localhost to connect|' sample.conf
 sed -i 's|TALK_PORT=|TALK_PORT=3478          # This allows to adjust the port that the talk container is using.|' sample.conf
@@ -84,9 +84,7 @@ sed -i 's|COLLABORA_SECCOMP_POLICY=|COLLABORA_SECCOMP_POLICY=--o:security.seccom
 sed -i 's|NEXTCLOUD_STARTUP_APPS=|NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts"        # Allows to modify the Nextcloud apps that are installed on starting AIO the first time|' sample.conf
 sed -i 's|NEXTCLOUD_ADDITIONAL_APKS=|NEXTCLOUD_ADDITIONAL_APKS=imagemagick        # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value.|' sample.conf
 sed -i 's|NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=|NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=imagick        # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value.|' sample.conf
-sed -i 's|INSTALL_LATEST_MAJOR=|INSTALL_LATEST_MAJOR=no        # Setting this to yes will install the latest Major Nextcloud version upon the first installation|' sample.conf
 sed -i 's|=$|=          # TODO! This needs to be a unique and good password!|' sample.conf
-echo 'IPV6_NETWORK=fd12:3456:789a:2::/64 # IPv6 subnet to use' >> sample.conf
 
 cat sample.conf
 
@@ -130,16 +128,8 @@ done
 
 cat << NETWORK >> containers.yml
 
-# Inspired by https://github.com/mailcow/mailcow-dockerized/blob/master/docker-compose.yml
 networks:
   nextcloud-aio:
-    name: nextcloud-aio
-    driver: bridge
-    enable_ipv6: true
-    ipam:
-      driver: default
-      config:
-        - subnet: \${IPV6_NETWORK}
 NETWORK
 
 cat containers.yml > latest.yml

multiple-instances.md

@@ -8,12 +8,12 @@ Below is described more in detail how the the second way works.
 ## Run multiple AIO instances on the same server with docker rootless
 1. Create as many linux users as you need first. The easiest way is to use `sudo adduser` and follow the setup for that. Make sure to create a strong unique password for each of them and write it down!
 1. Log in as each of the users e.g. by opening a new SSH connection and install docker rootless for each of them by following step 0-4 of the [docker rootless documentation](./docker-rootless.md).
-1. Then install AIO in reverse proxy mode by using the command that is descriebed in step 2 and 3 of the [reverse proxy documentation](./reverse-proxy.md) but use a different `APACHE_PORT` and [`TALK_PORT`](https://github.com/nextcloud/all-in-one#how-to-adjust-the-talk-port) for each instance as otherwise it will bug out. Also make sure to adjust the docker socket and `WATCHTOWER_DOCKER_SOCKET_PATH` correctly for each of them by following step 6 of the [docker rootless documentation](./docker-rootless.md). Additionally, modify `--publish 8080:8080` to a different port for each container, e.g. `8081:8080` as otherwise it will not work.<br>
+1. Then install AIO in reverse proxy mode by using the command that is descriebed in step 2 and 3 of the [reverse proxy documentation](./reverse-proxy.md) but use a different `APACHE_PORT` and [`TALK_PORT`](https://github.com/nextcloud/all-in-one#how-to-adjust-the-talk-port) for each instance as otherwise it will bug out. Also make sure to adjust the docker socket and `DOCKER_SOCKET_PATH` correctly for each of them by following step 6 of the [docker rootless documentation](./docker-rootless.md). Additionally, modify `--publish 8080:8080` to a different port for each container, e.g. `8081:8080` as otherwise it will not work.<br>
 **⚠️ Please note:** If you want to adjust the `NEXTCLOUD_DATADIR`, make sure to apply the correct permissions to the chosen path as documented at the bottom of the [docker rootless documentation](./docker-rootless.md). Also for the built-in backup to work, the target path needs to have the correct permissions as documented there, too.
 1. Now install your webserver of choice on the host system. It is recommended to use caddy for this as it is by far the easiest solution. You can do so by following https://caddyserver.com/docs/install#debian-ubuntu-raspbian or below. (It needs to be installed directly on the host or on a different server in the same network).
 1. Next create your Caddyfile with multiple entries and domains for the different instances like described in step 1 of the [reverse proxy documentation](./reverse-proxy.md). Obviously each domain needs to point correctly to the chosen `APACHE_PORT` that you've configured before. Then start Caddy which should automatically get the needed certificates for you if your domains are configured correctly and ports 80 and 443 are forwarded to your server.
 1. Now open each of the AIO interfaces by opening `https://ip.address.of.this.server:8080` or e.g. `https://ip.address.of.this.server:8081` or as chosen during step 3 of this documentation. 
 1. Finally type in the domain that you've configured for each of the instances during step 5 of this documentation and you are done.
-1. Please also do not forget to open/forward each chosen `TALK_PORT` UPD and TCP in your firewall/router as otherwise Talk will not work correctly!
+1. Please also do not forget to open each chosen `TALK_PORT` UPD and TCP in your firewall/router as otherwise Talk will not work correctly!
 
 Now everything should be set up correctly and you should have created multiple working instances of AIO on the same server!

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,13 +0,0 @@
-name: nextcloud-aio-helm-chart
-description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 5.1.0
-apiVersion: v2
-keywords:
-  - latest
-  - nextcloud
-  - helm-chart
-  - open-source
-  - cloud
-sources:
-  - https://github.com/nextcloud/all-in-one/tree/main/nextcloud-aio-helm-chart
-home: https://github.com/nextcloud/all-in-one/tree/main/nextcloud-aio-helm-chart

nextcloud-aio-helm-chart/readme.md

@@ -1,37 +0,0 @@
-# Nextcloud AIO Helm-chart
-
-You can run the containers that are build for AIO with Kubernetes using this Helm chart. This comes with a few downsides, that are discussed below.
-
-### Advantages
-- You can run it without a container having access to the docker socket
-- You can run the containers with Kubernetes
-
-### Disadvantages
-- You lose the AIO interface
-- You lose update notifications and automatic updates
-- You lose all AIO backup and restore features
-- **You need to know what you are doing**
-- For updating, you need to strictly follow the at the bottom described update routine
-- You need to monitor yourself if the volumes have enough free space and increase them if they don't by adjusting their size in values.yaml
-- Probably more
-
-## How to use this?
-
-First download this file: https://raw.githubusercontent.com/nextcloud/all-in-one/main/nextcloud-aio-helm-chart/values.yaml and adjust at least all values marked with `# TODO!`
-
-Then run:
-
-```
-helm repo add nextcloud-aio https://nextcloud.github.io/all-in-one/
-helm install my-release nextcloud-aio/nextcloud-aio-helm-chart -f values.yaml
-```
-
-And after a while, everything should be set up.
-
-## How to update?
-Since the values of this helm chart may change in the future, it is highly recommended to strictly follow the following procedure whenever you want to upgrade it.
-1. Stop all running pods
-1. Back up all volumes that got created by the Helm chart and the values.yaml file
-1. Run `helm repo update nextcloud-aio` in order to get the updated yaml files from the repository
-1. Now download the updated values.yaml file from https://raw.githubusercontent.com/nextcloud/all-in-one/main/nextcloud-aio-helm-chart/values.yaml and compare that with the one that you currently have locally. Look for variables that changed or got added. You can use the diff command to compare them.
-1. After the file update was successful, simply run `helm install my-release nextcloud-aio/nextcloud-aio-helm-chart -f values.yaml` to update to the new version.

php/composer.json

@@ -5,7 +5,7 @@
         }
     },
     "require": {
-        "php": "8.2.*",
+        "php": "8.1.*",
         "ext-json": "*",
         "ext-sodium": "*",
         "ext-curl": "*",
@@ -22,6 +22,6 @@
 		"psalm": "psalm --threads=1",
 		"psalm:update-baseline": "psalm --threads=1 --update-baseline",
 		"lint": "find . -name \\*.php -not -path './vendor/*' -exec php -l {} \\;",
-		"php-deprecation-detector": "find . -name \\*.php -not -path './vendor/*' -exec phpdd scan {} -n -t 8.2 \\;"
+		"php-deprecation-detector": "find . -name \\*.php -not -path './vendor/*' -exec phpdd scan {} -n -t 8.1 \\;"
 	}
 }

php/composer.lock

@@ -4,26 +4,26 @@
         "Read more about it at https://getcomposer.org/doc/01-basic-usage.md#installing-dependencies",
         "This file is @generated automatically"
     ],
-    "content-hash": "b0074cfbf6b5cde6d6d2207286ad2e85",
+    "content-hash": "ca8e9b0dbbbd88c096dd8f2bda37a315",
     "packages": [
         {
             "name": "guzzlehttp/guzzle",
-            "version": "7.6.1",
+            "version": "7.5.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/guzzle/guzzle.git",
-                "reference": "8444a2bacf1960bc6a2b62ed86b8e72e11eebe51"
+                "reference": "b50a2a1251152e43f6a37f0fa053e730a67d25ba"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/guzzle/guzzle/zipball/8444a2bacf1960bc6a2b62ed86b8e72e11eebe51",
-                "reference": "8444a2bacf1960bc6a2b62ed86b8e72e11eebe51",
+                "url": "https://api.github.com/repos/guzzle/guzzle/zipball/b50a2a1251152e43f6a37f0fa053e730a67d25ba",
+                "reference": "b50a2a1251152e43f6a37f0fa053e730a67d25ba",
                 "shasum": ""
             },
             "require": {
                 "ext-json": "*",
                 "guzzlehttp/promises": "^1.5",
-                "guzzlehttp/psr7": "^1.9.1 || ^2.4.5",
+                "guzzlehttp/psr7": "^1.9 || ^2.4",
                 "php": "^7.2.5 || ^8.0",
                 "psr/http-client": "^1.0",
                 "symfony/deprecation-contracts": "^2.2 || ^3.0"
@@ -48,6 +48,9 @@
                 "bamarni-bin": {
                     "bin-links": true,
                     "forward-command": false
+                },
+                "branch-alias": {
+                    "dev-master": "7.5-dev"
                 }
             },
             "autoload": {
@@ -113,7 +116,7 @@
             ],
             "support": {
                 "issues": "https://github.com/guzzle/guzzle/issues",
-                "source": "https://github.com/guzzle/guzzle/tree/7.6.1"
+                "source": "https://github.com/guzzle/guzzle/tree/7.5.0"
             },
             "funding": [
                 {
@@ -129,7 +132,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2023-05-15T20:43:01+00:00"
+            "time": "2022-08-28T15:39:27+00:00"
         },
         {
             "name": "guzzlehttp/promises",
@@ -217,22 +220,22 @@
         },
         {
             "name": "guzzlehttp/psr7",
-            "version": "2.5.0",
+            "version": "2.4.4",
             "source": {
                 "type": "git",
                 "url": "https://github.com/guzzle/psr7.git",
-                "reference": "b635f279edd83fc275f822a1188157ffea568ff6"
+                "reference": "3cf1b6d4f0c820a2cf8bcaec39fc698f3443b5cf"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/guzzle/psr7/zipball/b635f279edd83fc275f822a1188157ffea568ff6",
-                "reference": "b635f279edd83fc275f822a1188157ffea568ff6",
+                "url": "https://api.github.com/repos/guzzle/psr7/zipball/3cf1b6d4f0c820a2cf8bcaec39fc698f3443b5cf",
+                "reference": "3cf1b6d4f0c820a2cf8bcaec39fc698f3443b5cf",
                 "shasum": ""
             },
             "require": {
                 "php": "^7.2.5 || ^8.0",
                 "psr/http-factory": "^1.0",
-                "psr/http-message": "^1.1 || ^2.0",
+                "psr/http-message": "^1.0",
                 "ralouphie/getallheaders": "^3.0"
             },
             "provide": {
@@ -252,6 +255,9 @@
                 "bamarni-bin": {
                     "bin-links": true,
                     "forward-command": false
+                },
+                "branch-alias": {
+                    "dev-master": "2.4-dev"
                 }
             },
             "autoload": {
@@ -313,7 +319,7 @@
             ],
             "support": {
                 "issues": "https://github.com/guzzle/psr7/issues",
-                "source": "https://github.com/guzzle/psr7/tree/2.5.0"
+                "source": "https://github.com/guzzle/psr7/tree/2.4.4"
             },
             "funding": [
                 {
@@ -329,7 +335,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2023-04-17T16:11:26+00:00"
+            "time": "2023-03-09T13:19:02+00:00"
         },
         {
             "name": "http-interop/http-factory-guzzle",
@@ -723,21 +729,21 @@
         },
         {
             "name": "psr/http-client",
-            "version": "1.0.2",
+            "version": "1.0.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/php-fig/http-client.git",
-                "reference": "0955afe48220520692d2d09f7ab7e0f93ffd6a31"
+                "reference": "2dfb5f6c5eff0e91e20e913f8c5452ed95b86621"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/php-fig/http-client/zipball/0955afe48220520692d2d09f7ab7e0f93ffd6a31",
-                "reference": "0955afe48220520692d2d09f7ab7e0f93ffd6a31",
+                "url": "https://api.github.com/repos/php-fig/http-client/zipball/2dfb5f6c5eff0e91e20e913f8c5452ed95b86621",
+                "reference": "2dfb5f6c5eff0e91e20e913f8c5452ed95b86621",
                 "shasum": ""
             },
             "require": {
                 "php": "^7.0 || ^8.0",
-                "psr/http-message": "^1.0 || ^2.0"
+                "psr/http-message": "^1.0"
             },
             "type": "library",
             "extra": {
@@ -757,7 +763,7 @@
             "authors": [
                 {
                     "name": "PHP-FIG",
-                    "homepage": "https://www.php-fig.org/"
+                    "homepage": "http://www.php-fig.org/"
                 }
             ],
             "description": "Common interface for HTTP clients",
@@ -769,27 +775,27 @@
                 "psr-18"
             ],
             "support": {
-                "source": "https://github.com/php-fig/http-client/tree/1.0.2"
+                "source": "https://github.com/php-fig/http-client/tree/master"
             },
-            "time": "2023-04-10T20:12:12+00:00"
+            "time": "2020-06-29T06:28:15+00:00"
         },
         {
             "name": "psr/http-factory",
-            "version": "1.0.2",
+            "version": "1.0.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/php-fig/http-factory.git",
-                "reference": "e616d01114759c4c489f93b099585439f795fe35"
+                "reference": "12ac7fcd07e5b077433f5f2bee95b3a771bf61be"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/php-fig/http-factory/zipball/e616d01114759c4c489f93b099585439f795fe35",
-                "reference": "e616d01114759c4c489f93b099585439f795fe35",
+                "url": "https://api.github.com/repos/php-fig/http-factory/zipball/12ac7fcd07e5b077433f5f2bee95b3a771bf61be",
+                "reference": "12ac7fcd07e5b077433f5f2bee95b3a771bf61be",
                 "shasum": ""
             },
             "require": {
                 "php": ">=7.0.0",
-                "psr/http-message": "^1.0 || ^2.0"
+                "psr/http-message": "^1.0"
             },
             "type": "library",
             "extra": {
@@ -809,7 +815,7 @@
             "authors": [
                 {
                     "name": "PHP-FIG",
-                    "homepage": "https://www.php-fig.org/"
+                    "homepage": "http://www.php-fig.org/"
                 }
             ],
             "description": "Common interfaces for PSR-7 HTTP message factories",
@@ -824,31 +830,31 @@
                 "response"
             ],
             "support": {
-                "source": "https://github.com/php-fig/http-factory/tree/1.0.2"
+                "source": "https://github.com/php-fig/http-factory/tree/master"
             },
-            "time": "2023-04-10T20:10:41+00:00"
+            "time": "2019-04-30T12:38:16+00:00"
         },
         {
             "name": "psr/http-message",
-            "version": "1.1",
+            "version": "1.0.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/php-fig/http-message.git",
-                "reference": "cb6ce4845ce34a8ad9e68117c10ee90a29919eba"
+                "reference": "f6561bf28d520154e4b0ec72be95418abe6d9363"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/php-fig/http-message/zipball/cb6ce4845ce34a8ad9e68117c10ee90a29919eba",
-                "reference": "cb6ce4845ce34a8ad9e68117c10ee90a29919eba",
+                "url": "https://api.github.com/repos/php-fig/http-message/zipball/f6561bf28d520154e4b0ec72be95418abe6d9363",
+                "reference": "f6561bf28d520154e4b0ec72be95418abe6d9363",
                 "shasum": ""
             },
             "require": {
-                "php": "^7.2 || ^8.0"
+                "php": ">=5.3.0"
             },
             "type": "library",
             "extra": {
                 "branch-alias": {
-                    "dev-master": "1.1.x-dev"
+                    "dev-master": "1.0.x-dev"
                 }
             },
             "autoload": {
@@ -877,27 +883,27 @@
                 "response"
             ],
             "support": {
-                "source": "https://github.com/php-fig/http-message/tree/1.1"
+                "source": "https://github.com/php-fig/http-message/tree/master"
             },
-            "time": "2023-04-04T09:50:52+00:00"
+            "time": "2016-08-06T14:39:51+00:00"
         },
         {
             "name": "psr/http-server-handler",
-            "version": "1.0.2",
+            "version": "1.0.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/php-fig/http-server-handler.git",
-                "reference": "84c4fb66179be4caaf8e97bd239203245302e7d4"
+                "reference": "aff2f80e33b7f026ec96bb42f63242dc50ffcae7"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/php-fig/http-server-handler/zipball/84c4fb66179be4caaf8e97bd239203245302e7d4",
-                "reference": "84c4fb66179be4caaf8e97bd239203245302e7d4",
+                "url": "https://api.github.com/repos/php-fig/http-server-handler/zipball/aff2f80e33b7f026ec96bb42f63242dc50ffcae7",
+                "reference": "aff2f80e33b7f026ec96bb42f63242dc50ffcae7",
                 "shasum": ""
             },
             "require": {
                 "php": ">=7.0",
-                "psr/http-message": "^1.0 || ^2.0"
+                "psr/http-message": "^1.0"
             },
             "type": "library",
             "extra": {
@@ -917,7 +923,7 @@
             "authors": [
                 {
                     "name": "PHP-FIG",
-                    "homepage": "https://www.php-fig.org/"
+                    "homepage": "http://www.php-fig.org/"
                 }
             ],
             "description": "Common interface for HTTP server-side request handler",
@@ -933,27 +939,28 @@
                 "server"
             ],
             "support": {
-                "source": "https://github.com/php-fig/http-server-handler/tree/1.0.2"
+                "issues": "https://github.com/php-fig/http-server-handler/issues",
+                "source": "https://github.com/php-fig/http-server-handler/tree/master"
             },
-            "time": "2023-04-10T20:06:20+00:00"
+            "time": "2018-10-30T16:46:14+00:00"
         },
         {
             "name": "psr/http-server-middleware",
-            "version": "1.0.2",
+            "version": "1.0.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/php-fig/http-server-middleware.git",
-                "reference": "c1481f747daaa6a0782775cd6a8c26a1bf4a3829"
+                "reference": "2296f45510945530b9dceb8bcedb5cb84d40c5f5"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/php-fig/http-server-middleware/zipball/c1481f747daaa6a0782775cd6a8c26a1bf4a3829",
-                "reference": "c1481f747daaa6a0782775cd6a8c26a1bf4a3829",
+                "url": "https://api.github.com/repos/php-fig/http-server-middleware/zipball/2296f45510945530b9dceb8bcedb5cb84d40c5f5",
+                "reference": "2296f45510945530b9dceb8bcedb5cb84d40c5f5",
                 "shasum": ""
             },
             "require": {
                 "php": ">=7.0",
-                "psr/http-message": "^1.0 || ^2.0",
+                "psr/http-message": "^1.0",
                 "psr/http-server-handler": "^1.0"
             },
             "type": "library",
@@ -974,7 +981,7 @@
             "authors": [
                 {
                     "name": "PHP-FIG",
-                    "homepage": "https://www.php-fig.org/"
+                    "homepage": "http://www.php-fig.org/"
                 }
             ],
             "description": "Common interface for HTTP server-side middleware",
@@ -990,9 +997,9 @@
             ],
             "support": {
                 "issues": "https://github.com/php-fig/http-server-middleware/issues",
-                "source": "https://github.com/php-fig/http-server-middleware/tree/1.0.2"
+                "source": "https://github.com/php-fig/http-server-middleware/tree/master"
             },
-            "time": "2023-04-11T06:14:47+00:00"
+            "time": "2018-10-30T17:12:04+00:00"
         },
         {
             "name": "psr/log",
@@ -1639,16 +1646,16 @@
         },
         {
             "name": "twig/twig",
-            "version": "v3.6.0",
+            "version": "v3.5.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/twigphp/Twig.git",
-                "reference": "106c170d08e8415d78be2d16c3d057d0d108262b"
+                "reference": "a6e0510cc793912b451fd40ab983a1d28f611c15"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/twigphp/Twig/zipball/106c170d08e8415d78be2d16c3d057d0d108262b",
-                "reference": "106c170d08e8415d78be2d16c3d057d0d108262b",
+                "url": "https://api.github.com/repos/twigphp/Twig/zipball/a6e0510cc793912b451fd40ab983a1d28f611c15",
+                "reference": "a6e0510cc793912b451fd40ab983a1d28f611c15",
                 "shasum": ""
             },
             "require": {
@@ -1657,10 +1664,15 @@
                 "symfony/polyfill-mbstring": "^1.3"
             },
             "require-dev": {
-                "psr/container": "^1.0|^2.0",
+                "psr/container": "^1.0",
                 "symfony/phpunit-bridge": "^4.4.9|^5.0.9|^6.0"
             },
             "type": "library",
+            "extra": {
+                "branch-alias": {
+                    "dev-master": "3.5-dev"
+                }
+            },
             "autoload": {
                 "psr-4": {
                     "Twig\\": "src/"
@@ -1694,7 +1706,7 @@
             ],
             "support": {
                 "issues": "https://github.com/twigphp/Twig/issues",
-                "source": "https://github.com/twigphp/Twig/tree/v3.6.0"
+                "source": "https://github.com/twigphp/Twig/tree/v3.5.1"
             },
             "funding": [
                 {
@@ -1706,7 +1718,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2023-05-03T19:06:57+00:00"
+            "time": "2023-02-08T07:49:20+00:00"
         }
     ],
     "packages-dev": [],
@@ -1716,7 +1728,7 @@
     "prefer-stable": false,
     "prefer-lowest": false,
     "platform": {
-        "php": "8.2.*",
+        "php": "8.1.*",
         "ext-json": "*",
         "ext-sodium": "*",
         "ext-curl": "*",

php/containers-schema.json

@@ -13,49 +13,40 @@
 				"required": ["image", "container_name"],
 				"properties": {
 					"image": {
-						"type": "string",
-						"minLength": 1
+						"type": "string"
 					},
 					"expose": {
 						"type": "array",
 						"items": {
-							"type": "string",
-							"pattern": "^([0-9]{1,5})$"
+							"type": "string"
 						}
 					},
 					"cap_add": {
 						"type": "array",
 						"items": {
-							"type": "string",
-							"pattern": "^[A-Z_]+$"
+							"type": "string"
 						}
 					},
 					"depends_on": {
 						"type": "array",
 						"items": {
-							"type": "string",
-							"pattern": "^nextcloud-aio-[a-z-]+$"
+							"type": "string"
 						}
 					},
 					"display_name": {
-						"type": "string",
-						"pattern": "^[A-Za-z ]+$"
+						"type": "string"
 					},
 					"environment": {
 						"type": "array",
 						"items": {
-							"type": "string",
-							"pattern": "^.*=.*$",
-							"minlength": 1
+							"type": "string"
 						}
 					},
 					"container_name": {
-						"type": "string",
-						"pattern": "^nextcloud-aio-[a-z-]+$"
+						"type": "string"
 					},
 					"internal_port": {
-						"type": "string",
-						"pattern": "^(([0-9]{1,5})|host|(%[A-Z_]+%))$"
+						"type": "string"
 					},
 					"stop_grace_period": {
 						"type": "integer"
@@ -68,49 +59,30 @@
 							"minProperties": 3,
 							"properties": {
 								"ip_binding": {
-									"type": "string",
-									"pattern": "^(%[A-Z_]+%)?$"
+									"type": "string"
 								},
 								"port_number": {
-									"type": "string",
-									"pattern": "^(%[A-Z_]+%)$"
+									"type": "string"
 								},
 								"protocol": {
-									"type": "string",
-									"pattern": "^(tcp|udp)$"
+									"type": "string"
 								}
 							}
 						}
 					},
 					"restart": {
-						"type": "string",
-						"pattern": "^unless-stopped$"
-					},
-					"shm_size": {
-						"type": "integer"
+						"type": "string"
 					},
 					"secrets": {
 						"type": "array",
 						"items": {
-							"type": "string",
-							"pattern": "^[A-Z_]+$"
+							"type": "string"
 						}
 					},
 					"devices": {
 						"type": "array",
 						"items": {
-							"type": "string",
-							"pattern": "^/dev/[a-z]+$"
-						}
-					},
-					"apparmor_unconfined": {
-						"type": "boolean"
-					},
-					"backup_volumes": {
-						"type": "array",
-						"items": {
-							"type": "string",
-							"pattern": "^nextcloud_aio_[a-z_]+$"
+							"type": "string"
 						}
 					},
 					"volumes": {
@@ -121,12 +93,10 @@
 							"minProperties": 3,
 							"properties": {
 								"destination": {
-									"type": "string",
-									"pattern": "^((/[a-z_/.-]+)|(%[A-Z_]+%))$"
+									"type": "string"
 								},
 								"source": {
-									"type": "string",
-									"pattern": "^((nextcloud_aio_[a-z_]+)|(%[A-Z_]+%))$"
+									"type": "string"
 								},
 								"writeable": {
 									"type": "boolean"

php/containers.json

@@ -41,11 +41,7 @@
           "writeable": true
         }
       ],
-      "restart": "unless-stopped",
-      "backup_volumes": [
-        "nextcloud_aio_nextcloud",
-        "nextcloud_aio_apache"
-      ]
+      "restart": "unless-stopped"
     },
     {
       "container_name": "nextcloud-aio-database",
@@ -78,12 +74,7 @@
         "PGTZ=%TIMEZONE%"
       ],
       "stop_grace_period": 1800,
-      "restart": "unless-stopped",
-      "shm_size": 268435456,
-      "backup_volumes": [
-        "nextcloud_aio_database",
-        "nextcloud_aio_database_dump"
-      ]
+      "restart": "unless-stopped"
     },
     {
       "container_name": "nextcloud-aio-nextcloud",
@@ -170,14 +161,11 @@
         "STARTUP_APPS=%NEXTCLOUD_STARTUP_APPS%",
         "ADDITIONAL_APKS=%NEXTCLOUD_ADDITIONAL_APKS%",
         "ADDITIONAL_PHP_EXTENSIONS=%NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS%",
-        "INSTALL_LATEST_MAJOR=%INSTALL_LATEST_MAJOR%"
+        "SKIP_DATA_DIRECTORY_PERMISSION_CHECK=%SKIP_DATA_DIRECTORY_PERMISSION_CHECK%"
       ],
       "restart": "unless-stopped",
       "devices": [
         "/dev/dri"
-      ],
-      "backup_volumes": [
-        "nextcloud_aio_nextcloud"
       ]
     },
     {
@@ -218,8 +206,7 @@
         "extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true %COLLABORA_SECCOMP_POLICY% --o:remote_font_config.url=https://%NC_DOMAIN%/apps/richdocuments/settings/fonts.json",
         "dictionaries=%COLLABORA_DICTIONARIES%",
         "TZ=%TIMEZONE%",
-        "server_name=%NC_DOMAIN%",
-        "DONT_GEN_SSL_CERT=1"
+        "server_name=%NC_DOMAIN%"
       ],
       "volumes": [
         {
@@ -272,8 +259,7 @@
         "SELECTED_RESTORE_TIME=%SELECTED_RESTORE_TIME%",
         "BACKUP_RESTORE_PASSWORD=%BACKUP_RESTORE_PASSWORD%",
         "ADDITIONAL_DIRECTORIES_BACKUP=%ADDITIONAL_DIRECTORIES_BACKUP%",
-        "BORGBACKUP_HOST_LOCATION=%BORGBACKUP_HOST_LOCATION%",
-        "BORG_HOST_ID=nextcloud-aio-borgbackup"
+        "BORGBACKUP_HOST_LOCATION=%BORGBACKUP_HOST_LOCATION%"
       ],
       "volumes": [
         {
@@ -281,11 +267,31 @@
           "destination": "/root",
           "writeable": true
         },
+        {
+          "source": "nextcloud_aio_nextcloud",
+          "destination": "/nextcloud_aio_volumes/nextcloud_aio_nextcloud",
+          "writeable": true
+        },
         {
           "source": "%NEXTCLOUD_DATADIR%",
           "destination": "/nextcloud_aio_volumes/nextcloud_aio_nextcloud_data",
           "writeable": true
         },
+        {
+          "source": "nextcloud_aio_database",
+          "destination": "/nextcloud_aio_volumes/nextcloud_aio_database",
+          "writeable": true
+        },
+        {
+          "source": "nextcloud_aio_database_dump",
+          "destination": "/nextcloud_aio_volumes/nextcloud_aio_database_dump",
+          "writeable": true
+        },
+        {
+          "source": "nextcloud_aio_apache",
+          "destination": "/nextcloud_aio_volumes/nextcloud_aio_apache",
+          "writeable": true
+        },
         {
           "source": "nextcloud_aio_mastercontainer",
           "destination": "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer",
@@ -315,8 +321,7 @@
       ],
       "cap_add": [
         "SYS_ADMIN"
-      ],
-      "apparmor_unconfined": true
+      ]
     },
     {
       "container_name": "nextcloud-aio-watchtower",
@@ -326,7 +331,7 @@
       ],
       "volumes": [
         {
-          "source": "%WATCHTOWER_DOCKER_SOCKET_PATH%",
+          "source": "%DOCKER_SOCKET_PATH%",
           "destination": "/var/run/docker.sock",
           "writeable": false
         }

php/psalm-baseline.xml

@@ -1,2 +1,2 @@
 <?xml version="1.0" encoding="UTF-8"?>
-<files psalm-version="5.12.0@f90118cdeacd0088e7215e64c0c99ceca819e176"/>
+<files psalm-version="5.8.0@9cf4f60a333f779ad3bc704a555920e81d4fdcda"/>

php/public/forms.js

@@ -20,10 +20,8 @@
     if (xhr.status === 201) {
       window.location.replace(xhr.getResponseHeader('Location'));
     } else if (xhr.status === 422) {
-      disableSpinner()
       showError(xhr.response);
     } else if (xhr.status === 500) {
-      disableSpinner()
       showError("Server error. Please check the mastercontainer logs for details.");
     } else {
       // If the responose is not one of the above, we should reload to show the latest content
@@ -31,12 +29,16 @@
     }
   }
 
-  function enableSpinner() {
+  function disable(element) {
     document.getElementById('overlay').classList.add('loading');
+    element.classList.add('loading');
+    element.disabled = true;
   }
 
-  function disableSpinner() {
+  function enable(element) {
     document.getElementById('overlay').classList.remove('loading');
+    element.classList.remove('loading');
+    element.disabled = false;
   }
 
   function initForm(form) {
@@ -48,10 +50,11 @@
       var xhr = new XMLHttpRequest();
       xhr.addEventListener('load', handleEvent);
       xhr.addEventListener('error', () => showError("Failed to talk to server."));
-      xhr.addEventListener('error', () => disableSpinner());
+      xhr.addEventListener('load', () => enable(event.submitter));
+      xhr.addEventListener('error', () => enable(event.submitter));
       xhr.open(form.method, form.getAttribute("action"));
       xhr.setRequestHeader('Content-type', 'application/x-www-form-urlencoded');
-      enableSpinner();
+      disable(event.submitter);
       xhr.send(new URLSearchParams(new FormData(form)));
       event.preventDefault();
     }

php/public/index.php

@@ -70,18 +70,15 @@ $app->post('/api/configuration', \AIO\Controller\ConfigurationController::class
 // Views
 $app->get('/containers', function (Request $request, Response $response, array $args) use ($container) {
     $view = Twig::fromRequest($request);
-    $view->addExtension(new \AIO\Twig\ClassExtension());
     /** @var \AIO\Data\ConfigurationManager $configurationManager */
     $configurationManager = $container->get(\AIO\Data\ConfigurationManager::class);
-    /** @var \AIO\Docker\DockerActionManager $dockerActionManger */
     $dockerActionManger = $container->get(\AIO\Docker\DockerActionManager::class);
-    /** @var \AIO\Controller\DockerController $dockerController */
-    $dockerController = $container->get(\AIO\Controller\DockerController::class);
     $dockerActionManger->ConnectMasterContainerToNetwork();
+    $dockerController = $container->get(\AIO\Controller\DockerController::class);
     $dockerController->StartDomaincheckContainer();
+    $view->addExtension(new \AIO\Twig\ClassExtension());
     return $view->render($response, 'containers.twig', [
         'domain' => $configurationManager->GetDomain(),
-        'apache_port' => $configurationManager->GetApachePort(),
         'borg_backup_host_location' => $configurationManager->GetBorgBackupHostLocation(),
         'nextcloud_password' => $configurationManager->GetAndGenerateSecret('NEXTCLOUD_PASSWORD'),
         'containers' => (new \AIO\ContainerDefinitionFetcher($container->get(\AIO\Data\ConfigurationManager::class), $container))->FetchDefinition(),
@@ -114,12 +111,6 @@ $app->get('/containers', function (Request $request, Response $response, array $
         'is_imaginary_enabled' => $configurationManager->isImaginaryEnabled(),
         'is_fulltextsearch_enabled' => $configurationManager->isFulltextsearchEnabled(),
         'additional_backup_directories' => $configurationManager->GetAdditionalBackupDirectoriesString(),
-        'nextcloud_datadir' => $configurationManager->GetNextcloudDatadirMount(),
-        'nextcloud_mount' => $configurationManager->GetNextcloudMount(),
-        'nextcloud_upload_limit' => $configurationManager->GetNextcloudUploadLimit(),
-        'nextcloud_max_time' => $configurationManager->GetNextcloudMaxTime(),
-        'nextcloud_memory_limit' => $configurationManager->GetNextcloudMemoryLimit(),
-        'is_dri_device_enabled' => $configurationManager->isDriDeviceEnabled(),
     ]);
 })->setName('profile');
 $app->get('/login', function (Request $request, Response $response, array $args) use ($container) {
@@ -153,7 +144,6 @@ $app->get('/setup', function (Request $request, Response $response, array $args)
 
 // Auth Redirector
 $app->get('/', function (\Psr\Http\Message\RequestInterface $request, Response $response, array $args) use ($container) {
-    /** @var \AIO\Auth\AuthManager $authManager */
     $authManager = $container->get(\AIO\Auth\AuthManager::class);
 
     /** @var \AIO\Data\Setup $setup */

php/public/style.css

@@ -23,11 +23,6 @@ a {
     outline: none;
 }
 
-.button:focus {
-    color:black;
-    border: 2px solid black;
-}
-
 #logout {
     margin-top: 7px;
 }
@@ -149,7 +144,7 @@ input {
     padding: 20px;
     max-width: 100%;
     word-break: break-word;
-    max-width: 500px;
+    max-width: 470px;
     margin: 0 auto;
 }
 

php/src/Container/Container.php

@@ -25,10 +25,6 @@ class Container {
     private array $devices;
     /** @var string[] */
     private array $capAdd;
-    private int $shmSize;
-    private bool $apparmorUnconfined;
-    /** @var string[] */
-    private array $backupVolumes;
     private DockerActionManager $dockerActionManager;
 
     public function __construct(
@@ -45,9 +41,6 @@ class Container {
         array $secrets,
         array $devices,
         array $capAdd,
-        int $shmSize,
-        bool $apparmorUnconfined,
-        array $backupVolumes,
         DockerActionManager $dockerActionManager
     ) {
         $this->identifier = $identifier;
@@ -63,9 +56,6 @@ class Container {
         $this->secrets = $secrets;
         $this->devices = $devices;
         $this->capAdd = $capAdd;
-        $this->shmSize = $shmSize;
-        $this->apparmorUnconfined = $apparmorUnconfined;
-        $this->backupVolumes = $backupVolumes;
         $this->dockerActionManager = $dockerActionManager;
     }
 
@@ -85,14 +75,6 @@ class Container {
         return $this->restartPolicy;
     }
 
-    public function GetShmSize() : int {
-        return $this->shmSize;
-    }
-
-    public function isApparmorUnconfined() : bool {
-        return $this->apparmorUnconfined;
-    }
-
     public function GetMaxShutdownTime() : int {
         return $this->maxShutdownTime;
     }
@@ -109,10 +91,6 @@ class Container {
         return $this->capAdd;
     }
 
-    public function GetBackupVolumes() : array {
-        return $this->backupVolumes;
-    }
-
     public function GetPorts() : ContainerPorts {
         return $this->ports;
     }