Merge pull request #7028 from nextcloud/enh/noid/download-from-github

nextcloud: download nextcloud archive file from github instead of download.nextcloud.com

.github/workflows/dependency-updates.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
     - uses: actions/checkout@v5
-    - uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+    - uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
       with:
         php-version: 8.4
         extensions: apcu

.github/workflows/helm-release.yml

@@ -16,7 +16,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Turnstyle
-        uses: softprops/turnstyle@bff843227669a0c34c7f791ebd53a4b7c2a3febd # v2
+        uses: softprops/turnstyle@9d692f15fa9f84928799bccac2dba6565e024bdf # v2
         with:
           continue-after-seconds: 180
         env:

.github/workflows/lint-php.yml

@@ -36,7 +36,7 @@ jobs:
         uses: actions/checkout@ff7abcd0c3c05ccf6adc123a8cd1fd4fb30fb493 # v4.1.1
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: ${{ matrix.php-versions }}
           coverage: none

.github/workflows/php-deprecation-detector.yml

@@ -18,7 +18,7 @@ jobs:
     steps:
       - uses: actions/checkout@v5
       - name: Set up php
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/playwright.yml

@@ -15,7 +15,7 @@ jobs:
     steps:
       - uses: actions/checkout@v5
 
-      - uses: actions/setup-node@v5
+      - uses: actions/setup-node@v6
         with:
           node-version: lts/*
 

.github/workflows/psalm-update-baseline.yml

@@ -13,7 +13,7 @@ jobs:
       - uses: actions/checkout@v5
 
       - name: Set up php
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/psalm.yml

@@ -29,7 +29,7 @@ jobs:
         uses: actions/checkout@ff7abcd0c3c05ccf6adc123a8cd1fd4fb30fb493 # v4.1.1
 
       - name: Set up php
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/twig-lint.yml

@@ -27,7 +27,7 @@ jobs:
         uses: actions/checkout@v5
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

Containers/alpine/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a

Containers/apache/start.sh

@@ -66,6 +66,11 @@ caddy fmt --overwrite /tmp/Caddyfile
 # Add caddy path
 mkdir -p /mnt/data/caddy/
 
+# Fix caddy startup
+if [ -d "/mnt/data/caddy/locks" ]; then
+    rm -rf /mnt/data/caddy/locks/*
+fi
+
 # Fix apache startup
 rm -f /usr/local/apache2/logs/httpd.pid
 

Containers/borgbackup/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 
 RUN set -ex; \
     \

Containers/clamav/Dockerfile

@@ -1,18 +1,24 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \
-    apk add --no-cache tzdata clamav supervisor bash; \
+    apk add --no-cache tzdata clamav clamav-milter supervisor bash; \
     mkdir -p /var/lib/clamav /run/clamav /var/log/supervisord /var/run/supervisord; \
     chmod 777 -R /run/clamav /var/log/clamav /var/log/supervisord /var/run/supervisord; \
     chown -R 100:100 /var/lib/clamav; \
     sed -i "s|#\?MaxDirectoryRecursion.*|MaxDirectoryRecursion 30|g" /etc/clamav/clamd.conf; \
+    sed -i "s|#\?MaxScanSize.*|MaxScanSize 2G|g" /etc/clamav/clamd.conf; \
     sed -i "s|#\?MaxFileSize.*|MaxFileSize 2G|g" /etc/clamav/clamd.conf; \
-    sed -i "s|#\?PCREMaxFileSize.*|PCREMaxFileSize aio-placeholder|g" /etc/clamav/clamd.conf; \
+    sed -i "s|#\?PCREMaxFileSize.*|PCREMaxFileSize 0|g" /etc/clamav/clamd.conf; \
     sed -i "s|#\?StreamMaxLength.*|StreamMaxLength aio-placeholder|g" /etc/clamav/clamd.conf; \
     sed -i "s|#\?TCPSocket|TCPSocket|g" /etc/clamav/clamd.conf; \
-    sed -i "s|^LocalSocket .*|LocalSocket /tmp/clamd.sock|g" /etc/clamav/clamd.conf
+    sed -i "s|^LocalSocket .*|LocalSocket /tmp/clamd.sock|g" /etc/clamav/clamd.conf; \
+    sed -i "s|Example| |g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?MilterSocket inet:7357|MilterSocket inet:7357|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?ClamdSocket unix:/run/clamav/clamd.sock|ClamdSocket unix:/tmp/clamd.sock|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?AddHeader Replace|AddHeader Add|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?Foreground yes|Foreground yes|g" /etc/clamav/clamav-milter.conf
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh

Containers/clamav/supervisord.conf

@@ -21,3 +21,10 @@ stdout_logfile_maxbytes=0
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
 command=clamd --foreground --config-file=/tmp/clamd.conf
+
+[program:milter]
+stdout_logfile=/dev/stdout
+stdout_logfile_maxbytes=0
+stderr_logfile=/dev/stderr
+stderr_logfile_maxbytes=0
+command=clamav-milter --config-file=/etc/clamav/clamav-milter.conf

Containers/collabora/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/blob/master/docker/from-packages/Dockerfile
-FROM collabora/code:25.04.5.2.1
+FROM collabora/code:25.04.6.2.1
 
 USER root
 ARG DEBIAN_FRONTEND=noninteractive

Containers/docker-socket-proxy/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM haproxy:3.2.4-alpine
+FROM haproxy:3.2.6-alpine
 
 # hadolint ignore=DL3002
 USER root

Containers/domaincheck/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache bash lighttpd netcat-openbsd; \

Containers/fulltextsearch/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from here https://github.com/elastic/elasticsearch/blob/main/distribution/docker/src/docker/Dockerfile
-FROM elasticsearch:8.19.4
+FROM elasticsearch:8.19.6
 
 USER root
 

Containers/imaginary/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM golang:1.25.1-alpine3.22 AS go
+FROM golang:1.25.3-alpine3.22 AS go
 
 ENV IMAGINARY_HASH=1d4e251cfcd58ea66f8361f8721d7b8cc85002a3
 
@@ -14,7 +14,7 @@ RUN set -ex; \
         build-base; \
     go install github.com/h2non/imaginary@"$IMAGINARY_HASH";
 
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache \

Containers/mastercontainer/Dockerfile

@@ -1,12 +1,12 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:28.4.0-cli AS docker
+FROM docker:28.5.1-cli AS docker
 
 # Caddy is a requirement
 FROM caddy:2.10.2-alpine AS caddy
 
 # From https://github.com/docker-library/php/blob/master/8.4/alpine3.22/fpm/Dockerfile
-FROM php:8.4.12-fpm-alpine3.22
+FROM php:8.4.13-fpm-alpine3.22
 
 EXPOSE 80
 EXPOSE 8080

Containers/mastercontainer/README.md

@@ -0,0 +1,69 @@
+# Nextcloud All-in-One `mastercontainer`
+
+This folder contains the OCI/Docker container definition, along with associated resources and
+configuration files, for building the `mastercontainer` as part of the Nextcloud All-in-One
+project. This container hosts [the Nextcloud AIO interface](
+https://github.com/nextcloud/all-in-one/tree/main/php)[^app], and a dedicated PHP environment
+for it (which is completely independent of the Nextcloud Server).
+
+## Overview
+
+The mastercontainer acts as the central orchestration service for the deployment and management
+of all other containers in the Nextcloud All-in-One stack. It hosts:
+
+- A dedicated PHP SAPI/backend (php-fpm) for AIO itself (not Nextcloud Server)
+- An Apache service for accessing the AIO interface via a self-signed HTTPS VirtualHost on 8080/tcp
+- A Caddy reverse proxy service enabling HTTPS access to the AIO frontend on port 8443/tcp.
+  - Caddy will automatically issue a Let's Encrypt issued certificate if port 80 and 8443
+    is open/forwarded and a domain pointer is in place; then, simply open the Nextcloud AIO interface using the
+    domain (`https://your-domain-that-points-to-this-server.tld:8443`). The Let's Encrypt certificate request will
+    use an [ACME HTTP-01](https://letsencrypt.org/docs/challenge-types/#http-01-challenge) challenge.
+- Miscellaneous support services specific to AIO (backup management, health checks, etc.)
+
+## Key Responsibilities
+
+- Orchestrates the deployment and lifecycle of all Nextcloud service containers
+- Handles initial setup and container configuration
+- Coordinates image updates
+- Monitors general system health
+
+It triggers the initial installation and ensures the smooth operation of the Nextcloud
+All-in-One stack.
+
+## Contents
+
+- **Dockerfile**: Instructions for building the mastercontainer image.
+- **Entrypoint script**: The `start.sh` script is used for container initialization and runtime
+  configuration before starting supervisord.
+- [**Nextcloud All-in-One Controller App**](https://github.com/nextcloud/all-in-one/tree/main/php): The
+  core AIO orchestrator that handles configuration and settings for the containers.
+- **Supervisor**: The `supervisord.conf` file defines the long-running services hosted within
+  the container (php-fpm, cron, etc.)
+
+## Usage
+
+This container should be used as the trigger image when deploying the Nextcloud All-in-One
+stack in a Docker or other OCI-compliant container environment. For detailed deployment
+instructions, refer to the [project documentation](
+https://github.com/nextcloud/all-in-one).
+
+## Related Resources
+
+- [Main Repository](https://github.com/nextcloud/all-in-one)
+- [Documentation](https://github.com/nextcloud/all-in-one#readme)
+
+## Contributing
+
+Contributions are welcome! Please follow the Nextcloud project's guidelines and submit pull
+requests or issues via the main repository.
+
+## License
+
+This folder and its contents are licensed under the
+[GNU AGPLv3](https://www.gnu.org/licenses/agpl-3.0.html), in line with the rest of Nextcloud
+All-in-One.
+
+[^app]: The Nextcloud All-in-One interface allows users to install, configure, and
+manage their Nextcloud instance and related containers via a secure web interface and API.
+It automates and simplifies complex tasks such as container orchestration, backups, updates,
+and service management for users deploying Nextcloud in Docker environments.

Containers/mastercontainer/mastercontainer.conf

@@ -1,5 +1,5 @@
-Listen 8000
-Listen 8080
+Listen 127.0.0.1:8000
+Listen 8080 https
 
 # Deny access to .ht files
 <Files ".ht*">
@@ -7,8 +7,8 @@ Listen 8080
 </Files>
 
 # Http host
-<VirtualHost *:8000>
-    ServerName localhost
+<VirtualHost 127.0.0.1:8000>
+    ServerName 127.0.0.1
 
     # Add error log
     CustomLog /proc/self/fd/1 proxy

Containers/mastercontainer/start.sh

@@ -375,6 +375,11 @@ export TZ=Etc/UTC
 # Fix apache startup
 rm -f /var/run/apache2/httpd.pid
 
+# Fix caddy startup
+if [ -d "/mnt/docker-aio-config/caddy/locks" ]; then
+    rm -rf /mnt/docker-aio-config/caddy/locks/*
+fi
+
 # Fix the Caddyfile format
 caddy fmt --overwrite /Caddyfile
 

Containers/nextcloud/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM php:8.3.25-fpm-alpine3.22
+FROM php:8.3.26-fpm-alpine3.22
 
 ENV PHP_MEMORY_LIMIT=512M
 ENV PHP_UPLOAD_LIMIT=16G
@@ -8,7 +8,7 @@ ENV SOURCE_LOCATION=/usr/src/nextcloud
 ENV REDIS_DB_INDEX=0
 
 # AIO settings start # Do not remove or change this line!
-ENV NEXTCLOUD_VERSION=31.0.9
+ENV NEXTCLOUD_VERSION=31.0.10
 ENV AIO_TOKEN=123456
 ENV AIO_URL=localhost
 # AIO settings end # Do not remove or change this line!
@@ -84,7 +84,7 @@ RUN set -ex; \
 # pecl will claim success even if one install fails, so we need to perform each install separately
     pecl install -o igbinary-3.2.16; \
     pecl install APCu-5.1.27; \
-    pecl install -D 'enable-memcached-igbinary="yes"' memcached-3.3.0; \
+    pecl install -D 'enable-memcached-igbinary="yes"' memcached-3.4.0; \
     pecl install -oD 'enable-redis-igbinary="yes" enable-redis-zstd="yes" enable-redis-lz4="yes"' redis-6.2.0; \
    pecl install -o imagick-3.8.0; \
     \
@@ -132,7 +132,7 @@ RUN set -ex; \
         echo 'upload_max_filesize=${PHP_UPLOAD_LIMIT}'; \
         echo 'post_max_size=${PHP_UPLOAD_LIMIT}'; \
         echo 'max_execution_time=${PHP_MAX_TIME}'; \
-        echo 'max_input_time=${PHP_MAX_TIME}'; \
+        echo 'max_input_time=-1'; \
         echo 'default_socket_timeout=${PHP_MAX_TIME}'; \
     } > /usr/local/etc/php/conf.d/nextcloud.ini; \
     \
@@ -156,7 +156,7 @@ RUN set -ex; \
     ; \
     \
     curl -fsSL -o nextcloud.tar.bz2 \
-        "https://download.nextcloud.com/server/releases/nextcloud-${NEXTCLOUD_VERSION}.tar.bz2"; \
+        "https://github.com/nextcloud-releases/server/releases/download/v${NEXTCLOUD_VERSION}/nextcloud-${NEXTCLOUD_VERSION}.tar.bz2"; \
     curl -fsSL -o nextcloud.tar.bz2.asc \
         "https://download.nextcloud.com/server/releases/nextcloud-${NEXTCLOUD_VERSION}.tar.bz2.asc"; \
     export GNUPGHOME="$(mktemp -d)"; \

Containers/nextcloud/README.md

@@ -0,0 +1,35 @@
+# Nextcloud All-in-One ``nextcloud`` Container
+
+This folder contains the OCI/Docker container definition, along with associated resources and configuration files, for building the `nextcloud` container as part of the [Nextcloud All-in-One](https://github.com/nextcloud/all-in-one) project. This container hosts PHP and the Nextcloud Server application.
+
+## Overview
+
+The Nextcloud container provides the core Nextcloud application environment, including the necessary dependencies and configuration for seamless integration into the All-in-One stack. The container hosts:
+
+- The PHP SAPI/backend (php-fpm)
+- Nextcloud background jobs and scheduled tasks, which are handled via cron
+- Miscellaneous minor support services specific to AIO's Nextcloud deployment (health and exec)
+
+## Contents
+
+- **Dockerfile**: Instructions for building the Nextcloud container image.
+- **Entrypoint script**: The `start.sh` script is used for container initialization and runtime configuration before starting supervisord.
+- **Nextcloud configuration files**: Specific to running in a containerized setting and/or within AIO.
+- **Supervisor**: The `supervisord.conf` file defines the long-running services hosted within the container (php-fpm, cron, etc.).
+
+## Usage
+
+This container is intended to be used as part of the All-in-One deployment and is not meant to be used on its own. Among other requirements, it needs a web server container (which AIO provides in a dedicated Apache container). It is designed to be orchestrated by the [All-in-One mastercontainer](https://github.com/nextcloud/all-in-one/tree/main/Containers/mastercontainer) or used within an [AIO Manual Installation](https://github.com/nextcloud/all-in-one/tree/main/manual-install) or [AIO Helm chart](https://github.com/nextcloud/all-in-one/tree/main/nextcloud-aio-helm-chart).
+
+## Documentation
+
+- [Nextcloud All-in-One Documentation](https://github.com/nextcloud/all-in-one#readme)
+- [Nextcloud Documentation](https://docs.nextcloud.com/)
+
+## Contributing
+
+Contributions are welcome! Please follow the Nextcloud project's guidelines and submit pull requests or issues via the main repository.
+
+## License
+
+This folder and its contents are licensed under the [GNU AGPLv3](https://www.gnu.org/licenses/agpl-3.0.html), in line with the rest of Nextcloud All-in-One.

Containers/nextcloud/config/postgres.config.php

@@ -0,0 +1,9 @@
+<?php
+if (getenv('NEXTCLOUD_TRUSTED_CERTIFICATES_POSTGRES')) {
+  $CONFIG = array(
+    'pgsql_ssl' => array(
+      'mode' => 'verify-ca',
+      'rootcert' => '/var/www/html/data/certificates/POSTGRES',
+    ),
+  );
+}

Containers/nextcloud/config/s3.config.php

@@ -4,8 +4,9 @@ if (getenv('OBJECTSTORE_S3_BUCKET')) {
   $use_path = getenv('OBJECTSTORE_S3_USEPATH_STYLE');
   $use_legacyauth = getenv('OBJECTSTORE_S3_LEGACYAUTH');
   $autocreate = getenv('OBJECTSTORE_S3_AUTOCREATE');
+  $multibucket = getenv('OBJECTSTORE_S3_MULTIBUCKET');
   $CONFIG = array(
-    'objectstore' => array(
+    $multibucket === 'true' ? 'objectstore_multibucket' : 'objectstore' => array(
       'class' => '\OC\Files\ObjectStore\S3',
       'arguments' => array(
         'bucket' => getenv('OBJECTSTORE_S3_BUCKET'),
@@ -16,12 +17,12 @@ if (getenv('OBJECTSTORE_S3_BUCKET')) {
         'port' => getenv('OBJECTSTORE_S3_PORT') ?: '',
         'storageClass' => getenv('OBJECTSTORE_S3_STORAGE_CLASS') ?: '',
         'objectPrefix' => getenv("OBJECTSTORE_S3_OBJECT_PREFIX") ? getenv("OBJECTSTORE_S3_OBJECT_PREFIX") : "urn:oid:",
-        'autocreate' => (strtolower($autocreate) === 'false' || $autocreate == false) ? false : true,
-        'use_ssl' => (strtolower($use_ssl) === 'false' || $use_ssl == false) ? false : true,
+        'autocreate' => strtolower($autocreate) !== 'false',
+        'use_ssl' => strtolower($use_ssl) !== 'false',
         // required for some non Amazon S3 implementations
-        'use_path_style' => $use_path == true && strtolower($use_path) !== 'false',
+        'use_path_style' => strtolower($use_path) === 'true',
         // required for older protocol versions
-        'legacy_auth' => $use_legacyauth == true && strtolower($use_legacyauth) !== 'false'
+        'legacy_auth' => strtolower($use_legacyauth) === 'true'
       )
     )
   );

Containers/nextcloud/entrypoint.sh

@@ -25,31 +25,34 @@ if [ "$DATABASE_TYPE" = postgres ]; then
     export DATABASE_TYPE=pgsql
 fi
 
-# Only start container if redis is accessible
+# Only start container if Redis is accessible
 # shellcheck disable=SC2153
 while ! nc -z "$REDIS_HOST" "6379"; do
-    echo "Waiting for redis to start..."
+    echo "Waiting for Redis to start..."
     sleep 5
 done
 
 # Check permissions in ncdata
-touch "$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
-if ! [ -f "$NEXTCLOUD_DATA_DIR/this-is-a-test-file" ]; then
-    echo "The www-data user doesn't seem to have access rights in the datadir.
-Most likely are the files located on a drive that does not follow linux permissions.
-Please adjust the permissions like mentioned below.
-The found permissions are:
-$(stat -c "%u:%g %a" "$NEXTCLOUD_DATA_DIR")
-(userID:groupID permissions)
-but they should be:
-33:0 750
-(userID:groupID permissions)
-Also make sure that the parent directories on the host of the directory that you've chosen as datadir are publicly readable with e.g. 'sudo chmod +r /mnt' (adjust the command accordingly to your case) and the same for all subdirectories.
-Additionally, if you want to use a Fuse-mount as datadir, set 'allow_other' as additional mount option.
-For SMB/CIFS mounts as datadir, see https://github.com/nextcloud/all-in-one#can-i-use-a-cifssmb-share-as-nextclouds-datadir"
+test_file="$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
+touch "$test_file"
+if ! [ -f "$test_file" ]; then
+    echo "The www-data user does not appear to have access rights to the data directory."
+    echo "It is possible that the files are on a filesystem that does not support standard Linux permissions,"
+    echo "or the permissions simply need to be adjusted. Please change the permissions as described below."
+    echo "Current permissions are:"
+    stat -c "%u:%g %a" "$NEXTCLOUD_DATA_DIR"
+    echo "(userID:groupID permissions)"
+    echo "They should be:"
+    echo "33:0 750"
+    echo "(userID:groupID permissions)"
+    echo "Also, ensure that all parent directories on the host of your chosen data directory are publicly readable."
+    echo "For example: sudo chmod +r /mnt  (adjust this command as needed)."
+    echo "If you want to use a FUSE mount as the data directory, add 'allow_other' as an additional mount option."
+    echo "For SMB/CIFS mounts as the data directory, see:"
+    echo "  https://github.com/nextcloud/all-in-one#can-i-use-a-cifssmb-share-as-nextclouds-datadir"
     exit 1
 fi
-rm "$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
+rm -f "$test_file"
 
 if [ -f /var/www/html/version.php ]; then
     # shellcheck disable=SC2016
@@ -71,26 +74,31 @@ fi
 
 # Don't start the container if Nextcloud is not compatible with the PHP version
 if [ -f "/var/www/html/lib/versioncheck.php" ] && ! php /var/www/html/lib/versioncheck.php; then
-    echo "It seems like your installed Nextcloud is not compatible with the by the container provided PHP version."
-    echo "This most likely happened because you tried to restore an old Nextcloud version from backup that is not compatible with the PHP version that comes with the container."
-    echo "Please try to restore a more recent backup which contains a Nextcloud version that is compatible with the PHP version that comes with the container."
-    echo "If you do not have a more recent backup, feel free to have a look at this documentation: https://github.com/nextcloud/all-in-one/blob/main/manual-upgrade.md"
+    echo "Your installed Nextcloud version is not compatible with the PHP version provided by this image."
+    echo "This typically occurs when you restore an older Nextcloud backup that does not support the"
+    echo "PHP version included in this image."
+    echo "Please restore a more recent backup that includes a compatible Nextcloud version."
+    echo "If you do not have a more recent backup, refer to the manual upgrade documentation:"
+    echo "  https://github.com/nextcloud/all-in-one/blob/main/manual-upgrade.md"
     exit 1
 fi
 
 # Do not start the container if the last update failed
 if [ -f "$NEXTCLOUD_DATA_DIR/update.failed" ]; then
     echo "The last Nextcloud update failed."
-    echo "Please restore from backup and try again!"
-    echo "If you do not have a backup in place, you can simply delete the update.failed file in the datadir which will allow the container to start again."
+    echo "Please restore from a backup and try again."
+    echo "If you do not have a backup, you can delete the update.failed file in the data directory"
+    echo "to allow the container to start again."
     exit 1
 fi
 
 # Do not start the container if the install failed
 if [ -f "$NEXTCLOUD_DATA_DIR/install.failed" ]; then
     echo "The initial Nextcloud installation failed."
-    echo "Please reset AIO properly and try again. For further clues what went wrong, check the logs above."
-    echo "See https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance"
+    echo "For more information about what went wrong, check the logs above."
+    echo "Please reset AIO properly and try again."
+    echo "See:"
+    echo "  https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance"
     exit 1
 fi
 
@@ -143,7 +151,7 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
         if [ "$installed_version" != "0.0.0.0" ]; then
 # Check connection to appstore start # Do not remove or change this line!
             while true; do
-                echo -e "Checking connection to appstore"
+                echo -e "Checking connection to the app store..."
                 APPSTORE_URL="https://apps.nextcloud.com/api/v1"
                 if grep -q appstoreurl /var/www/html/config/config.php; then
                     set -x
@@ -154,10 +162,10 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
                 CURL_STATUS="$(curl -LI "$APPSTORE_URL"/apps.json -o /dev/null -w '%{http_code}\n' -s)"
                 if [[ "$CURL_STATUS" = "200" ]]
                 then
-                    echo "Appstore is reachable"
+                    echo "App store is reachable."
                     break
                 else
-                    echo "Curl didn't produce a 200 status, is appstore reachable?"
+                    echo "Curl did not return a 200 status. Is the app store reachable?"
                     sleep 5
                 fi
             done
@@ -167,21 +175,21 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
 
             php /var/www/html/occ maintenance:mode --off
 
-            echo "Getting and backing up the status of apps for later, this might take a while..."
+            echo "Getting and backing up the status of apps for later; this might take a while..."
             NC_APPS="$(find /var/www/html/custom_apps/ -type d -maxdepth 1 -mindepth 1 | sed 's|/var/www/html/custom_apps/||g')"
             if [ -z "$NC_APPS" ]; then
-                echo "No apps detected, aborting export of app status..."
+                echo "No apps detected. Aborting export of app status..."
                 APPSTORAGE="no-export-done"
             else
                 mapfile -t NC_APPS_ARRAY <<< "$NC_APPS"
                 declare -Ag APPSTORAGE
-                echo "Disabling apps before the update in order to make the update procedure more safe. This can take a while..."
+                echo "Disabling apps before the update to make the update procedure safer. This can take a while..."
                 for app in "${NC_APPS_ARRAY[@]}"; do
                     if APPSTORAGE[$app]="$(php /var/www/html/occ config:app:get "$app" enabled)"; then
                         php /var/www/html/occ app:disable "$app"
                     else
                         APPSTORAGE[$app]=""
-                        echo "Not disabling $app because the occ command to get the enabled state was failing."
+                        echo "Not disabling $app because the occ command to get its enabled state failed."
                     fi
                 done
             fi
@@ -195,8 +203,13 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
             run_upgrade_if_needed_due_to_app_update
         fi
 
-        echo "Initializing nextcloud $image_version ..."
-        rsync -rlD --delete --exclude-from=/upgrade.exclude "$SOURCE_LOCATION/" /var/www/html/
+        echo "Initializing Nextcloud $image_version ..."
+
+        # Copy over initial data from Nextcloud archive
+        rsync -rlD --delete \
+            --exclude-from=/upgrade.exclude \
+            "$SOURCE_LOCATION/" \
+            /var/www/html/
 
         # Copy custom_apps from Nextcloud archive
         if ! directory_empty "$SOURCE_LOCATION/custom_apps"; then
@@ -204,22 +217,47 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
             for app in "$SOURCE_LOCATION/custom_apps"/*; do
                 app_id="$(basename "$app")"
                 mkdir -p "/var/www/html/custom_apps/$app_id"
-                rsync -rlD --delete --include "/$app_id/" --exclude '/*' "$SOURCE_LOCATION/custom_apps/" /var/www/html/custom_apps/
+                rsync -rlD --delete \
+                    --include "/$app_id/" \
+                    --exclude '/*' \
+                    "$SOURCE_LOCATION/custom_apps/" \
+                    /var/www/html/custom_apps/
             done
             set +x
         fi
 
-        # Copy over initial data from Nextcloud archive
+        # Copy these from Nextcloud archive if they don't exist yet (i.e. new install)
         for dir in config data custom_apps themes; do
             if [ ! -d "/var/www/html/$dir" ] || directory_empty "/var/www/html/$dir"; then
-                rsync -rlD --include "/$dir/" --exclude '/*' "$SOURCE_LOCATION/" /var/www/html/
+                rsync -rlD \
+                    --include "/$dir/" \
+                    --exclude '/*' \
+                    "$SOURCE_LOCATION/" \
+                    /var/www/html/
             fi
         done
-        rsync -rlD --delete --include '/config/' --exclude '/*' --exclude '/config/CAN_INSTALL' --exclude '/config/config.sample.php' --exclude '/config/config.php' "$SOURCE_LOCATION/" /var/www/html/
-        rsync -rlD --include '/version.php' --exclude '/*' "$SOURCE_LOCATION/" /var/www/html/
+
+        rsync -rlD --delete \
+            --include '/config/' \
+            --exclude '/*' \
+            --exclude '/config/CAN_INSTALL' \
+            --exclude '/config/config.sample.php' \
+            --exclude '/config/config.php' \
+            "$SOURCE_LOCATION/" \
+            /var/www/html/
+
+        rsync -rlD \
+            --include '/version.php' \
+            --exclude '/*' \
+            "$SOURCE_LOCATION/" \
+            /var/www/html/
+
         echo "Initializing finished"
 
-        #install
+        ################
+        # Fresh Install
+        ################
+        
         if [ "$installed_version" = "0.0.0.0" ]; then
             echo "New Nextcloud instance."
 
@@ -233,22 +271,37 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
                 INSTALL_OPTIONS+=(--data-dir "$NEXTCLOUD_DATA_DIR")
             fi
 
-            # We do our own permission check so the permission check is not needed
-            cat << DATADIR_PERMISSION_CONF > /var/www/html/config/datadir.permission.config.php
+        # Skip the default permission check (we do our own)
+        cat > /var/www/html/config/datadir.permission.config.php <<'EOF'
 <?php
-    \$CONFIG = array (
-    'check_data_directory_permissions' => false
-);
-DATADIR_PERMISSION_CONF
+    $CONFIG = array (
+        'check_data_directory_permissions' => false
+    );
+EOF
+
+            # Write out postgres root cert
+            if [ -n "$NEXTCLOUD_TRUSTED_CERTIFICATES_POSTGRES" ]; then
+                mkdir /var/www/html/data/certificates
+                echo "$NEXTCLOUD_TRUSTED_CERTIFICATES_POSTGRES" > "/var/www/html/data/certificates/POSTGRES"
+            fi
 
             echo "Installing with $DATABASE_TYPE database"
             # Set a default value for POSTGRES_PORT
             if [ -z "$POSTGRES_PORT" ]; then
-              POSTGRES_PORT=5432
+                POSTGRES_PORT=5432
             fi
-            # shellcheck disable=SC2153
-            INSTALL_OPTIONS+=(--database "$DATABASE_TYPE" --database-name "$POSTGRES_DB" --database-user "$POSTGRES_USER" --database-pass "$POSTGRES_PASSWORD" --database-host "$POSTGRES_HOST" --database-port "$POSTGRES_PORT")
 
+            # Add database options to INSTALL_OPTIONS
+            # shellcheck disable=SC2153
+            INSTALL_OPTIONS+=(
+                --database "$DATABASE_TYPE"
+                --database-name "$POSTGRES_DB"
+                --database-user "$POSTGRES_USER"
+                --database-pass "$POSTGRES_PASSWORD"
+                --database-host "$POSTGRES_HOST"
+                --database-port "$POSTGRES_PORT"
+            )
+            
             echo "Starting Nextcloud installation..."
             if ! php /var/www/html/occ maintenance:install "${INSTALL_OPTIONS[@]}"; then
                 echo "Installation of Nextcloud failed!"
@@ -270,7 +323,7 @@ DATADIR_PERMISSION_CONF
 
                 if [ "$try" -ge "$max_retries" ]; then
                     echo "Installation of Nextcloud failed!"
-                    echo "Install errors: $(cat /var/www/html/data/nextcloud.log)"
+                    echo "Installation errors: $(cat /var/www/html/data/nextcloud.log)"
                     touch "$NEXTCLOUD_DATA_DIR/install.failed"
                     exit 1
                 fi
@@ -306,10 +359,12 @@ DATADIR_PERMISSION_CONF
                 installed_version="$(php -r 'require "/var/www/html/version.php"; echo implode(".", $OC_Version);')"
                 INSTALLED_MAJOR="${installed_version%%.*}"
                 IMAGE_MAJOR="${image_version%%.*}"
+                # If a valid upgrade path, trigger the Nextcloud built-in Updater
                 if ! [ "$INSTALLED_MAJOR" -gt "$IMAGE_MAJOR" ]; then
                     php /var/www/html/updater/updater.phar --no-interaction --no-backup
                     if ! php /var/www/html/occ -V || php /var/www/html/occ status | grep maintenance | grep -q 'true'; then
                         echo "Installation of Nextcloud failed!"
+                        # TODO: Add a hint here about what to do / where to look / updater.log? 
                         touch "$NEXTCLOUD_DATA_DIR/install.failed"
                         exit 1
                     fi
@@ -386,11 +441,11 @@ DATADIR_PERMISSION_CONF
         #upgrade
         else
             touch "$NEXTCLOUD_DATA_DIR/update.failed"
-            echo "Upgrading nextcloud from $installed_version to $image_version..."
+            echo "Upgrading Nextcloud from $installed_version to $image_version..."
             php /var/www/html/occ config:system:delete integrity.check.disabled
             if ! php /var/www/html/occ upgrade || ! php /var/www/html/occ -V; then
                 echo "Upgrade failed. Please restore from backup."
-                bash /notify.sh "Nextcloud update to $image_version failed!" "Please restore from backup!"
+                bash /notify.sh "Nextcloud update to $image_version failed!" "Please restore from backup."
                 exit 1
             fi
 
@@ -398,7 +453,7 @@ DATADIR_PERMISSION_CONF
             installed_version="$(php -r 'require "/var/www/html/version.php"; echo implode(".", $OC_Version);')"
 
             rm "$NEXTCLOUD_DATA_DIR/update.failed"
-            bash /notify.sh "Nextcloud update to $image_version successful!" "Feel free to inspect the Nextcloud container logs for more info."
+            bash /notify.sh "Nextcloud update to $image_version successful!" "You may inspect the Nextcloud container logs for more information."
 
             php /var/www/html/occ app:update --all
 
@@ -406,7 +461,7 @@ DATADIR_PERMISSION_CONF
 
             # Restore app status
             if [ "${APPSTORAGE[0]}" != "no-export-done" ]; then
-                echo "Restoring the status of apps. This can take a while..."
+                echo "Restoring app statuses. This may take a while..."
                 for app in "${!APPSTORAGE[@]}"; do
                     if [ -n "${APPSTORAGE[$app]}" ]; then
                         if [ "${APPSTORAGE[$app]}" != "no" ]; then
@@ -418,13 +473,13 @@ DATADIR_PERMISSION_CONF
                                     php /var/www/html/occ maintenance:mode --off
                                 fi
                                 run_upgrade_if_needed_due_to_app_update
-                                echo "The $app app could not get enabled. Probably because it is not compatible with the new Nextcloud version."
+                                echo "The $app app could not be re-enabled, probably because it is not compatible with the new Nextcloud version."
                                 if [ "$app" = apporder ]; then
                                     CUSTOM_HINT="The apporder app was deprecated. A possible replacement is the side_menu app, aka 'Custom menu'."
                                 else
-                                    CUSTOM_HINT="Most likely because it is not compatible with the new Nextcloud version."
+                                    CUSTOM_HINT="Most likely, it is not compatible with the new Nextcloud version."
                                 fi
-                                bash /notify.sh "Could not enable the $app app after the Nextcloud update!" "$CUSTOM_HINT Feel free to look at the Nextcloud update logs and force-enable the app again from the app-store UI."
+                                bash /notify.sh "Could not re-enable the $app app after the Nextcloud update!" "$CUSTOM_HINT Feel free to review the Nextcloud update logs and force-enable the app again if you wish."
                                 continue
                             fi
                             # Only restore the group settings, if the app was enabled (and is thus compatible with the new NC version)
@@ -446,7 +501,7 @@ DATADIR_PERMISSION_CONF
             php /var/www/html/occ config:app:set updatenotification notify_groups --value="[]"
 
             # Apply optimization
-            echo "Doing some optimizations..."
+            echo "Performing some optimizations..."
             if [ "$NEXTCLOUD_SKIP_DATABASE_OPTIMIZATION" != yes ]; then
                 php /var/www/html/occ maintenance:repair --include-expensive
                 php /var/www/html/occ db:add-missing-indices
@@ -477,10 +532,10 @@ if [ -z "$OBJECTSTORE_S3_BUCKET" ] && [ -z "$OBJECTSTORE_SWIFT_URL" ]; then
     # Check if appdata is present
     # If not, something broke (e.g. changing ncdatadir after aio was first started)
     if [ -z "$(find "$NEXTCLOUD_DATA_DIR/" -maxdepth 1 -mindepth 1 -type d -name "appdata_*")" ]; then
-        echo "Appdata is not present. Did you maybe change the datadir after the initial Nextcloud installation? This is not supported!"
+        echo "Appdata is not present. Did you change the datadir after the initial Nextcloud installation? This is not supported!"
         echo "See https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir"
-        echo "If you adjusted the datadir to be located on an external drive, make sure that the drive is still mounted!"
-        echo "In the datadir was found:"
+        echo "If you moved the datadir to an external drive, make sure that the drive is still mounted."
+        echo "The following was found in the datadir:"
         ls -la "$NEXTCLOUD_DATA_DIR/"
         exit 1
     fi
@@ -672,7 +727,7 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
             fi
         fi
     else
-        echo "Warning: No ipv4-address found for $COLLABORA_HOST."
+        echo "Warning: No IPv4 address found for $COLLABORA_HOST."
     fi
     if [ -n "$COLLABORA_IPv6_ADDRESS" ]; then
         if ! echo "$COLLABORA_ALLOW_LIST" | grep -q "$COLLABORA_IPv6_ADDRESS"; then
@@ -683,7 +738,7 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
             fi
         fi
     else
-        echo "No ipv6-address found for $COLLABORA_HOST."
+        echo "No IPv6 address found for $COLLABORA_HOST."
     fi
     if [ -n "$COLLABORA_ALLOW_LIST" ]; then
         PRIVATE_IP_RANGES='127.0.0.1/8,192.168.0.0/16,172.16.0.0/12,10.0.0.0/8,fd00::/8,::1'
@@ -697,7 +752,7 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
         fi
         php /var/www/html/occ config:app:set richdocuments wopi_allowlist --value="$COLLABORA_ALLOW_LIST"
     else
-        echo "Warning: wopi_allowlist is empty which should not be the case!"
+        echo "Warning: wopi_allowlist is empty; this should not be the case!"
     fi
 else
     if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/richdocuments" ]; then
@@ -707,15 +762,20 @@ fi
 
 # OnlyOffice
 if [ "$ONLYOFFICE_ENABLED" = 'yes' ]; then
+    # Determine OnlyOffice port based on host pattern
     if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
         ONLYOFFICE_PORT=80
     else
         ONLYOFFICE_PORT=443
     fi
+
+    # Wait for OnlyOffice to become available
     while ! nc -z "$ONLYOFFICE_HOST" "$ONLYOFFICE_PORT"; do
-        echo "waiting for OnlyOffice to become available..."
+        echo "Waiting for OnlyOffice to become available..."
         sleep 5
     done
+
+    # Install or enable OnlyOffice app as needed
     if ! [ -d "/var/www/html/custom_apps/onlyoffice" ]; then
         php /var/www/html/occ app:install onlyoffice
     elif [ "$(php /var/www/html/occ config:app:get onlyoffice enabled)" != "yes" ]; then
@@ -723,16 +783,25 @@ if [ "$ONLYOFFICE_ENABLED" = 'yes' ]; then
     elif [ "$SKIP_UPDATE" != 1 ]; then
         php /var/www/html/occ app:update onlyoffice
     fi
+
+    # Set OnlyOffice configuration
     php /var/www/html/occ config:system:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
     php /var/www/html/occ config:app:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
     php /var/www/html/occ config:system:set onlyoffice jwt_header --value="AuthorizationJwt"
+
+    # Adjust the OnlyOffice host if using internal pattern
     if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
         ONLYOFFICE_HOST="$NC_DOMAIN/onlyoffice"
         export ONLYOFFICE_HOST
     fi
+
     php /var/www/html/occ config:app:set onlyoffice DocumentServerUrl --value="https://$ONLYOFFICE_HOST"
 else
-    if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/onlyoffice" ] && [ -n "$ONLYOFFICE_SECRET" ] && [ "$(php /var/www/html/occ config:system:get onlyoffice jwt_secret)" = "$ONLYOFFICE_SECRET" ]; then
+    # Remove OnlyOffice app if disabled and removal is requested
+    if [ "$REMOVE_DISABLED_APPS" = yes ] && \
+       [ -d "/var/www/html/custom_apps/onlyoffice" ] && \
+       [ -n "$ONLYOFFICE_SECRET" ] && \
+       [ "$(php /var/www/html/occ config:system:get onlyoffice jwt_secret)" = "$ONLYOFFICE_SECRET" ]; then
         php /var/www/html/occ app:remove onlyoffice
     fi
 fi
@@ -778,7 +847,7 @@ fi
 if [ -d "/var/www/html/custom_apps/spreed" ]; then
     if [ "$TALK_RECORDING_ENABLED" = 'yes' ]; then
         while ! nc -z "$TALK_RECORDING_HOST" 1234; do
-            echo "waiting for Talk Recording to become available..."
+            echo "Waiting for Talk Recording to become available..."
             sleep 5
         done
         # TODO: migrate to occ command if that becomes available
@@ -793,12 +862,12 @@ fi
 if [ "$CLAMAV_ENABLED" = 'yes' ]; then
     count=0
     while ! nc -z "$CLAMAV_HOST" 3310 && [ "$count" -lt 90 ]; do
-        echo "waiting for clamav to become available..."
+        echo "Waiting for ClamAV to become available..."
         count=$((count+5))
         sleep 5
     done
     if [ "$count" -ge 90 ]; then
-        echo "Clamav did not start in time. Skipping initialization and disabling files_antivirus app."
+        echo "ClamAV did not start in time. Skipping initialization and disabling files_antivirus app."
         php /var/www/html/occ app:disable files_antivirus
     else
         if ! [ -d "/var/www/html/custom_apps/files_antivirus" ]; then
@@ -812,8 +881,11 @@ if [ "$CLAMAV_ENABLED" = 'yes' ]; then
         php /var/www/html/occ config:app:set files_antivirus av_port --value="3310"
         php /var/www/html/occ config:app:set files_antivirus av_host --value="$CLAMAV_HOST"
         php /var/www/html/occ config:app:set files_antivirus av_stream_max_length --value="$CLAMAV_MAX_SIZE"
-        php /var/www/html/occ config:app:set files_antivirus av_max_file_size --value="$CLAMAV_MAX_SIZE"
+        php /var/www/html/occ config:app:set files_antivirus av_max_file_size --value="-1"
         php /var/www/html/occ config:app:set files_antivirus av_infected_action --value="only_log"
+        if [ -n "$CLAMAV_BLOCKLISTED_DIRECTORIES" ]; then
+            php /var/www/html/occ config:app:set files_antivirus av_blocklisted_directories --value="$CLAMAV_BLOCKLISTED_DIRECTORIES"
+        fi
     fi
 else
     if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/files_antivirus" ]; then
@@ -842,7 +914,7 @@ fi
 if [ "$FULLTEXTSEARCH_ENABLED" = 'yes' ]; then
     count=0
     while ! nc -z "$FULLTEXTSEARCH_HOST" "$FULLTEXTSEARCH_PORT" && [ "$count" -lt 90 ]; do
-        echo "waiting for Fulltextsearch to become available..."
+        echo "Waiting for Fulltextsearch to become available..."
         count=$((count+5))
         sleep 5
     done
@@ -879,14 +951,14 @@ if [ "$FULLTEXTSEARCH_ENABLED" = 'yes' ]; then
 
         # Do the index
         if ! [ -f "$NEXTCLOUD_DATA_DIR/fts-index.done" ]; then
-            echo "Waiting 10s before activating FTS..."
+            echo "Waiting 10 seconds before activating fulltextsearch..."
             sleep 10
             echo "Activating fulltextsearch..."
             if php /var/www/html/occ fulltextsearch:test && php /var/www/html/occ fulltextsearch:index "{\"errors\": \"reset\"}" --no-readline; then
                 touch "$NEXTCLOUD_DATA_DIR/fts-index.done"
             else
                 echo "Fulltextsearch failed. Could not index."
-                echo "Feel free to follow https://github.com/nextcloud/all-in-one/discussions/1709 if you want to skip the indexing in the future."
+                echo "If you want to skip indexing in the future, see https://github.com/nextcloud/all-in-one/discussions/1709"
             fi
         fi
     fi

Containers/notify-push/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh

Containers/notify-push/start.sh

@@ -66,8 +66,13 @@ if [ "$POSTGRES_USER" = nextcloud ]; then
     export POSTGRES_USER
 fi
 
+# Postgres root cert
+if [ -f "/nextcloud/data/certificates/POSTGRES" ]; then
+    POSTGRES_CERT="?sslmode=verify-ca&sslrootcert=/nextcloud/data/certificates/POSTGRES"
+fi
+
 # Set sensitive values as env
-export DATABASE_URL="$DATABASE_TYPE://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB"
+export DATABASE_URL="$DATABASE_TYPE://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB$POSTGRES_CERT"
 export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
 
 # Run it

Containers/onlyoffice/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From https://github.com/ONLYOFFICE/Docker-DocumentServer/blob/master/Dockerfile
-FROM onlyoffice/documentserver:9.0.4.1
+FROM onlyoffice/documentserver:9.1.0.1
 
 # USER root is probably used
 

Containers/redis/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From https://github.com/docker-library/redis/blob/master/7.2/alpine/Dockerfile
-FROM redis:7.2.10-alpine
+FROM redis:7.2.11-alpine
 
 COPY --chmod=775 start.sh /start.sh
 

Containers/talk-recording/Dockerfile

@@ -1,10 +1,10 @@
 # syntax=docker/dockerfile:latest
-FROM python:3.13.7-alpine3.22
+FROM python:3.14.0-alpine3.22
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
-ENV RECORDING_VERSION=v0.1
+ENV RECORDING_VERSION=v0.2.0
 ENV ALLOW_ALL=false
 ENV HPB_PROTOCOL=https
 ENV NC_PROTOCOL=https

Containers/talk-recording/recording.conf

@@ -1,3 +1,5 @@
+# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
+# SPDX-License-Identifier: AGPL-3.0-or-later
 [logs]
 # Log level based on numeric values of Python logging levels:
 # - Critical: 50
@@ -12,6 +14,11 @@
 # IP and port to listen on for HTTP requests.
 #listen = 127.0.0.1:8000
 
+[app]
+# Comma separated list of trusted proxies (IPs or CIDR networks) that may set
+# the "X-Forwarded-For" header.
+#trustedproxies =
+
 [backend]
 # Allow any hostname as backend endpoint. This is extremely insecure and should
 # only be used during development.
@@ -100,6 +107,18 @@
 # ffmpeg. The options given here fully override the default global options.
 #common = ffmpeg -loglevel level+warning -n
 
+# The (additional) options given to ffmpeg for the audio input. The options
+# given here extend the default options for the audio input, although they do
+# not override them.
+# Default options: '-f pulse -i {AUDIO_SOURCE}'
+#inputaudio =
+
+# The (additional) options given to ffmpeg for the video input. The options
+# given here extend the default options for the video input, although they do
+# not override them.
+# Default options: '-f x11grab -draw_mouse 0 -video_size {WIDTH}x{HEIGHT} -i {VIDEO_SOURCE}'
+#inputvideo =
+
 # The options given to ffmpeg to encode the audio output. The options given here
 # fully override the default options for the audio output.
 #outputaudio = -c:a libopus
@@ -120,4 +139,31 @@
 # will use Google Chrome, or Chromium if Google Chrome is not installed.
 # Allowed values: firefox, chrome
 # Defaults to firefox
-# browser = firefox
+#browser = firefox
+
+# Path to the Selenium driver to use for recordings.
+# If set the driver must match the browser being used (for example,
+# "/usr/bin/geckodriver" for "firefox"). If no driver is explicitly set Selenium
+# Manager will try to find the right one in $PATH, downloading it as a fallback.
+# Note that Selenium Manager does not work in some architectures (for example,
+# Linux on arm64/aarch64), so in those architectures the driver must be
+# explicitly set.
+#driverPath =
+
+# Path to the browser executable to use for recordings.
+# If set the executable must match the browser being used (for example,
+# "/usr/bin/firefox-esr" for "firefox"). If no executable is explicitly set
+# Selenium Manager will try to find the right one in $PATH. Depending on the
+# installed Selenium version if the executable is not found Selenium Manager may
+# also download the browser as a fallback.
+# Note that Selenium Manager does not work in some architectures (for example,
+# Linux on arm64/aarch64); in those architectures the Selenium driver will try
+# to find the executable, but the executable may need to be explicitly set if
+# not found by the driver.
+#browserPath =
+
+[stats]
+# Comma-separated list of IP addresses (or CIDR networks) that are allowed to
+# access the stats endpoint.
+# Leave commented to only allow access from "127.0.0.1".
+#allowed_ips =

Containers/talk-recording/start.sh

@@ -59,6 +59,8 @@ extensionvideo = .webm
 
 [recording]
 browser = firefox
+driverPath = /usr/bin/geckodriver
+browserPath = /usr/bin/firefox
 RECORDING_CONF
 
 exec "$@"

Containers/talk/Dockerfile

@@ -1,10 +1,10 @@
 # syntax=docker/dockerfile:latest
-FROM nats:2.11.9-scratch AS nats
-FROM eturnal/eturnal:1.12.1 AS eturnal
+FROM nats:2.12.1-scratch AS nats
+FROM eturnal/eturnal:1.12.2-alpine AS eturnal
 FROM strukturag/nextcloud-spreed-signaling:2.0.4 AS signaling
-FROM alpine:3.22.1 AS janus
+FROM alpine:3.22.2 AS janus
 
-ARG JANUS_VERSION=v1.3.2
+ARG JANUS_VERSION=v1.3.3
 WORKDIR /src
 RUN set -ex; \
     apk upgrade --no-cache -a; \
@@ -35,7 +35,7 @@ RUN set -ex; \
     make configs; \
     rename -v ".jcfg.sample" ".jcfg" /usr/local/etc/janus/*.jcfg.sample
 
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 ENV ETURNAL_ETC_DIR="/conf"
 ENV SKIP_CERT_VERIFY=false
 COPY --from=janus     --chmod=777 --chown=1000:1000 /usr/local                          /usr/local

Containers/watchtower/Dockerfile

@@ -1,7 +1,7 @@
 # syntax=docker/dockerfile:latest
-FROM ghcr.io/nicholas-fedor/watchtower:1.11.8 AS watchtower
+FROM ghcr.io/nicholas-fedor/watchtower:1.12.1 AS watchtower
 
-FROM alpine:3.22.1
+FROM alpine:3.22.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \

Containers/whiteboard/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/nextcloud/whiteboard/blob/main/Dockerfile
-FROM ghcr.io/nextcloud-releases/whiteboard:v1.2.0
+FROM ghcr.io/nextcloud-releases/whiteboard:v1.3.0
 
 USER root
 RUN set -ex; \

community-containers/calcardbackup/readme.md

@@ -2,7 +2,7 @@
 This container packages calcardbackup which is a tool that exports calendars and addressbooks from Nextcloud to .ics and .vcf files and saves them to a compressed file.
   
 ### Notes  
-- Backups will be created at 00:00 CEST every day. Make sure that this does not conflict with the configured daily backups inside AIO.
+- Backups will be created at 00:00 UTC every day. Make sure that this does not conflict with the configured daily backups inside AIO.
 - All the exports will be included in AIOs backup solution
 - You can find the exports in the nextcloud_aio_calcardbackup volume
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack  

community-containers/lldap/lldap.json

@@ -27,7 +27,7 @@
         "LLDAP_JWT_SECRET",
         "LLDAP_LDAP_USER_PASS"
       ],
-      "ui_secret": "LLDAP_JWT_SECRET",
+      "ui_secret": "LLDAP_LDAP_USER_PASS",
       "volumes": [
         {
           "source": "nextcloud_aio_lldap",

community-containers/lldap/readme.md

@@ -18,10 +18,7 @@ Functionality with this configuration:
 
 > For simplicity, this configuration is done via the command line (don't worry, it's very simple).
 
-First, you need to retrieve the LLDAP admin password, this will be used later on. Which you need to type in or copy and paste:
-```bash
-sudo docker inspect nextcloud-aio-lldap | grep LLDAP_LDAP_USER_PASS
-```
+First, you need to retrieve the LLDAP admin password that you can see next to the container in the AIO interface. There you can configure smtp first and then invite users via mail.
 
 Now go into the Nextcloud container:<br>
 **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /lldap.sh`.

community-containers/minio/minio.json

@@ -0,0 +1,41 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-minio",
+            "image_tag": "v2",
+            "display_name": "Minio S3 Storage",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/minio",
+            "image": "ghcr.io/szaimen/aio-minio",
+            "internal_port": "9000",
+            "environment": [
+                "MINIO_ROOT_USER=nextcloud",
+                "MINIO_ROOT_PASSWORD=%MINIO_ROOT_PASSWORD%"
+            ],
+            "secrets": [
+                "MINIO_ROOT_PASSWORD"
+            ],
+            "volumes": [
+            {
+                "source": "nextcloud_aio_minio",
+                "destination": "/data",
+                "writeable": true
+            }
+            ],
+            "backup_volumes": [
+                "nextcloud_aio_minio"
+            ],
+            "nextcloud_exec_commands": [
+                "php /var/www/html/occ config:system:set objectstore class --value 'OC\\Files\\ObjectStore\\S3'",
+                "php /var/www/html/occ config:system:set objectstore arguments autocreate --value true --type bool",
+                "php /var/www/html/occ config:system:set objectstore arguments use_path_style --value true --type bool",
+                "php /var/www/html/occ config:system:set objectstore arguments use_ssl --value false --type bool",
+                "php /var/www/html/occ config:system:set objectstore arguments region --value ''",
+                "php /var/www/html/occ config:system:set objectstore arguments bucket --value nextcloud",
+                "php /var/www/html/occ config:system:set objectstore arguments key --value nextcloud",
+                "php /var/www/html/occ config:system:set objectstore arguments secret --value %MINIO_ROOT_PASSWORD%",
+                "php /var/www/html/occ config:system:set objectstore arguments port --value 9000",
+                "php /var/www/html/occ config:system:set objectstore arguments hostname --value nextcloud-aio-minio"
+            ]
+        }
+    ]
+}

community-containers/minio/readme.md

@@ -0,0 +1,18 @@
+## Minio
+This container bundles minio s3 storage and auto-configures it for you.
+
+>[!WARNING]
+> Enabling this container will remove access to all the files formerly written to the data directory.
+> So only enable this on a clean instance directly after installing AIO.
+> All additional users that are added via Nextcloud afterwards are going to work correctly.
+> Also, after enabling and using it, make sure to not disable the container as you cannot migrate from s3 to local storage anymore and s3 is a critical part of your infrastructure from then on.
+
+### Notes
+- The data of Minio will be automatically included in AIOs backup solution!
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/szaimen/aio-minio
+
+### Maintainer
+https://github.com/szaimen

community-containers/nextcloud-exporter/nextcloud-exporter.json

@@ -5,7 +5,7 @@
             "display_name": "Prometheus Nextcloud Exporter",
             "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter",
             "image": "ghcr.io/xperimental/nextcloud-exporter",
-            "image_tag": "0.8.0",
+            "image_tag": "0.9.0",
             "internal_port": "9205",
             "restart": "unless-stopped",
             "ports": [

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 11.8.0
+version: 11.10.0
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -61,7 +61,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: WHITEBOARD_HOST
               value: nextcloud-aio-whiteboard
-          image: ghcr.io/nextcloud-releases/aio-apache:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-apache:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -36,7 +36,7 @@ spec:
         {{- end }}
       initContainers:
         - name: init-subpath
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-alpine:20251015_082711
           command:
             - mkdir
             - "-p"
@@ -59,7 +59,7 @@ spec:
               value: "{{ .Values.NEXTCLOUD_UPLOAD_LIMIT }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-clamav:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-clamav:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -35,7 +35,7 @@ spec:
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:logging.level_startup=warning --o:home_mode.enable=true --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: ghcr.io/nextcloud-releases/aio-collabora:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-collabora:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -35,7 +35,7 @@ spec:
         {{- end }}
       initContainers:
         - name: init-subpath
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-alpine:20251015_082711
           command:
             - mkdir
             - "-p"
@@ -64,7 +64,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-postgresql:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-postgresql:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -24,7 +24,7 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-alpine:20251015_082711
           command:
             - chmod
             - "777"
@@ -54,7 +54,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: ghcr.io/nextcloud-releases/aio-fulltextsearch:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-fulltextsearch:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -38,7 +38,7 @@ spec:
               value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-imaginary:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-imaginary:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -38,7 +38,7 @@ spec:
 # AIO settings start # Do not remove or change this line!
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-alpine:20251015_082711
           command:
             - chmod
             - "777"
@@ -188,7 +188,7 @@ spec:
               value: "{{ .Values.WHITEBOARD_ENABLED }}"
             - name: WHITEBOARD_SECRET
               value: "{{ .Values.WHITEBOARD_SECRET }}"
-          image: ghcr.io/nextcloud-releases/aio-nextcloud:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-nextcloud:20251015_082711
           {{- if eq (.Values.RPSS_ENABLED | default "no") "yes" }} # AIO-config - do not change this comment!
           securityContext:
             # The items below only work in container context

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -55,7 +55,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-notify-push:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-notify-push:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -24,7 +24,7 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-alpine:20251015_082711
           command:
             - chmod
             - "777"
@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-onlyoffice:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-onlyoffice:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -39,7 +39,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-redis:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-redis:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -52,7 +52,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-talk:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-talk:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -44,7 +44,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-talk-recording:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-talk-recording:20251015_082711
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-whiteboard-deployment.yaml

@@ -48,7 +48,7 @@ spec:
               value: redis
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-whiteboard:20250918_093027
+          image: ghcr.io/nextcloud-releases/aio-whiteboard:20251015_082711
           readinessProbe:
             exec:
               command:

php/composer.lock

@@ -391,16 +391,16 @@
         },
         {
             "name": "laravel/serializable-closure",
-            "version": "v2.0.4",
+            "version": "v2.0.6",
             "source": {
                 "type": "git",
                 "url": "https://github.com/laravel/serializable-closure.git",
-                "reference": "b352cf0534aa1ae6b4d825d1e762e35d43f8a841"
+                "reference": "038ce42edee619599a1debb7e81d7b3759492819"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/laravel/serializable-closure/zipball/b352cf0534aa1ae6b4d825d1e762e35d43f8a841",
-                "reference": "b352cf0534aa1ae6b4d825d1e762e35d43f8a841",
+                "url": "https://api.github.com/repos/laravel/serializable-closure/zipball/038ce42edee619599a1debb7e81d7b3759492819",
+                "reference": "038ce42edee619599a1debb7e81d7b3759492819",
                 "shasum": ""
             },
             "require": {
@@ -448,7 +448,7 @@
                 "issues": "https://github.com/laravel/serializable-closure/issues",
                 "source": "https://github.com/laravel/serializable-closure"
             },
-            "time": "2025-03-19T13:51:03+00:00"
+            "time": "2025-10-09T13:42:30+00:00"
         },
         {
             "name": "nikic/fast-route",
@@ -3338,16 +3338,16 @@
         },
         {
             "name": "nikic/php-parser",
-            "version": "v5.6.1",
+            "version": "v5.6.2",
             "source": {
                 "type": "git",
                 "url": "https://github.com/nikic/PHP-Parser.git",
-                "reference": "f103601b29efebd7ff4a1ca7b3eeea9e3336a2a2"
+                "reference": "3a454ca033b9e06b63282ce19562e892747449bb"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/nikic/PHP-Parser/zipball/f103601b29efebd7ff4a1ca7b3eeea9e3336a2a2",
-                "reference": "f103601b29efebd7ff4a1ca7b3eeea9e3336a2a2",
+                "url": "https://api.github.com/repos/nikic/PHP-Parser/zipball/3a454ca033b9e06b63282ce19562e892747449bb",
+                "reference": "3a454ca033b9e06b63282ce19562e892747449bb",
                 "shasum": ""
             },
             "require": {
@@ -3390,9 +3390,9 @@
             ],
             "support": {
                 "issues": "https://github.com/nikic/PHP-Parser/issues",
-                "source": "https://github.com/nikic/PHP-Parser/tree/v5.6.1"
+                "source": "https://github.com/nikic/PHP-Parser/tree/v5.6.2"
             },
-            "time": "2025-08-13T20:13:15+00:00"
+            "time": "2025-10-21T19:32:17+00:00"
         },
         {
             "name": "phpdocumentor/reflection-common",
@@ -3883,16 +3883,16 @@
         },
         {
             "name": "symfony/console",
-            "version": "v6.4.25",
+            "version": "v6.4.26",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/console.git",
-                "reference": "273fd29ff30ba0a88ca5fb83f7cf1ab69306adae"
+                "reference": "492de6dfd93910d7d7a729c5a04ddcd2b9e99c4f"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/console/zipball/273fd29ff30ba0a88ca5fb83f7cf1ab69306adae",
-                "reference": "273fd29ff30ba0a88ca5fb83f7cf1ab69306adae",
+                "url": "https://api.github.com/repos/symfony/console/zipball/492de6dfd93910d7d7a729c5a04ddcd2b9e99c4f",
+                "reference": "492de6dfd93910d7d7a729c5a04ddcd2b9e99c4f",
                 "shasum": ""
             },
             "require": {
@@ -3957,7 +3957,7 @@
                 "terminal"
             ],
             "support": {
-                "source": "https://github.com/symfony/console/tree/v6.4.25"
+                "source": "https://github.com/symfony/console/tree/v6.4.26"
             },
             "funding": [
                 {
@@ -3977,7 +3977,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2025-08-22T10:21:53+00:00"
+            "time": "2025-09-26T12:13:46+00:00"
         },
         {
             "name": "symfony/filesystem",
@@ -4449,16 +4449,16 @@
         },
         {
             "name": "symfony/string",
-            "version": "v7.3.3",
+            "version": "v7.3.4",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/string.git",
-                "reference": "17a426cce5fd1f0901fefa9b2a490d0038fd3c9c"
+                "reference": "f96476035142921000338bad71e5247fbc138872"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/string/zipball/17a426cce5fd1f0901fefa9b2a490d0038fd3c9c",
-                "reference": "17a426cce5fd1f0901fefa9b2a490d0038fd3c9c",
+                "url": "https://api.github.com/repos/symfony/string/zipball/f96476035142921000338bad71e5247fbc138872",
+                "reference": "f96476035142921000338bad71e5247fbc138872",
                 "shasum": ""
             },
             "require": {
@@ -4473,7 +4473,6 @@
             },
             "require-dev": {
                 "symfony/emoji": "^7.1",
-                "symfony/error-handler": "^6.4|^7.0",
                 "symfony/http-client": "^6.4|^7.0",
                 "symfony/intl": "^6.4|^7.0",
                 "symfony/translation-contracts": "^2.5|^3.0",
@@ -4516,7 +4515,7 @@
                 "utf8"
             ],
             "support": {
-                "source": "https://github.com/symfony/string/tree/v7.3.3"
+                "source": "https://github.com/symfony/string/tree/v7.3.4"
             },
             "funding": [
                 {
@@ -4536,7 +4535,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2025-08-25T06:35:40+00:00"
+            "time": "2025-09-11T14:36:48+00:00"
         },
         {
             "name": "vimeo/psalm",
@@ -4725,28 +4724,28 @@
         },
         {
             "name": "webmozart/assert",
-            "version": "1.11.0",
+            "version": "1.12.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/webmozarts/assert.git",
-                "reference": "11cb2199493b2f8a3b53e7f19068fc6aac760991"
+                "reference": "541057574806f942c94662b817a50f63f7345360"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/webmozarts/assert/zipball/11cb2199493b2f8a3b53e7f19068fc6aac760991",
-                "reference": "11cb2199493b2f8a3b53e7f19068fc6aac760991",
+                "url": "https://api.github.com/repos/webmozarts/assert/zipball/541057574806f942c94662b817a50f63f7345360",
+                "reference": "541057574806f942c94662b817a50f63f7345360",
                 "shasum": ""
             },
             "require": {
                 "ext-ctype": "*",
+                "ext-date": "*",
+                "ext-filter": "*",
                 "php": "^7.2 || ^8.0"
             },
-            "conflict": {
-                "phpstan/phpstan": "<0.12.20",
-                "vimeo/psalm": "<4.6.1 || 4.6.2"
-            },
-            "require-dev": {
-                "phpunit/phpunit": "^8.5.13"
+            "suggest": {
+                "ext-intl": "",
+                "ext-simplexml": "",
+                "ext-spl": ""
             },
             "type": "library",
             "extra": {
@@ -4777,9 +4776,9 @@
             ],
             "support": {
                 "issues": "https://github.com/webmozarts/assert/issues",
-                "source": "https://github.com/webmozarts/assert/tree/1.11.0"
+                "source": "https://github.com/webmozarts/assert/tree/1.12.0"
             },
-            "time": "2022-06-03T18:03:27+00:00"
+            "time": "2025-10-20T12:43:39+00:00"
         }
     ],
     "aliases": [],

php/src/Data/ConfigurationManager.php

@@ -286,11 +286,6 @@ class ConfigurationManager
             $value = 0;
         }
 
-        // Currently only works on x64. See https://github.com/nextcloud/nextcloud-talk-recording/issues/17
-        if (!$this->isx64Platform()) {
-            $value = 0;
-        }
-
         $config = $this->GetConfig();
         $config['isTalkRecordingEnabled'] = $value;
         $this->WriteConfig($config);

php/templates/containers.twig

@@ -17,7 +17,7 @@
 
     <div class="container">
         <main>
-            <h1>Nextcloud AIO v11.9.0</h1>
+            <h1>Nextcloud AIO v11.11.0</h1>
 
             {# Add 2nd tab warning #}
             <script type="text/javascript" src="second-tab-warning.js"></script>

php/templates/includes/optional-containers.twig

@@ -96,7 +96,7 @@
                 data-initial-state="false"
             {% endif %}
         >
-        <label for="talk-recording">Nextcloud Talk Recording-server (needs Nextcloud Talk being enabled and ~1GB additional RAM and ~2 additional vCPUs, currently <a target="_blank" href="https://github.com/nextcloud/nextcloud-talk-recording/issues/17">only works on x86_64</a>)</label>
+        <label for="talk-recording">Nextcloud Talk Recording-server (needs Nextcloud Talk being enabled and ~1GB additional RAM and ~2 additional vCPUs)</label>
     </p>
     <p>
         <input

php/tests/package-lock.json

@@ -7,20 +7,19 @@
     "": {
       "name": "e2e",
       "version": "1.0.0",
-      "license": "ISC",
+      "license": "AGPL-3.0-or-later",
       "devDependencies": {
-        "@playwright/test": "^1.51.1",
-        "@types/node": "^22.13.10"
+        "@playwright/test": "^1.56.1"
       }
     },
     "node_modules/@playwright/test": {
-      "version": "1.51.1",
-      "resolved": "https://registry.npmjs.org/@playwright/test/-/test-1.51.1.tgz",
-      "integrity": "sha512-nM+kEaTSAoVlXmMPH10017vn3FSiFqr/bh4fKg9vmAdMfd9SDqRZNvPSiAHADc/itWak+qPvMPZQOPwCBW7k7Q==",
+      "version": "1.56.1",
+      "resolved": "https://registry.npmjs.org/@playwright/test/-/test-1.56.1.tgz",
+      "integrity": "sha512-vSMYtL/zOcFpvJCW71Q/OEGQb7KYBPAdKh35WNSkaZA75JlAO8ED8UN6GUNTm3drWomcbcqRPFqQbLae8yBTdg==",
       "dev": true,
       "license": "Apache-2.0",
       "dependencies": {
-        "playwright": "1.51.1"
+        "playwright": "1.56.1"
       },
       "bin": {
         "playwright": "cli.js"
@@ -29,16 +28,6 @@
         "node": ">=18"
       }
     },
-    "node_modules/@types/node": {
-      "version": "22.13.10",
-      "resolved": "https://registry.npmjs.org/@types/node/-/node-22.13.10.tgz",
-      "integrity": "sha512-I6LPUvlRH+O6VRUqYOcMudhaIdUVWfsjnZavnsraHvpBwaEyMN29ry+0UVJhImYL16xsscu0aske3yA+uPOWfw==",
-      "dev": true,
-      "license": "MIT",
-      "dependencies": {
-        "undici-types": "~6.20.0"
-      }
-    },
     "node_modules/fsevents": {
       "version": "2.3.2",
       "resolved": "https://registry.npmjs.org/fsevents/-/fsevents-2.3.2.tgz",
@@ -55,13 +44,13 @@
       }
     },
     "node_modules/playwright": {
-      "version": "1.51.1",
-      "resolved": "https://registry.npmjs.org/playwright/-/playwright-1.51.1.tgz",
-      "integrity": "sha512-kkx+MB2KQRkyxjYPc3a0wLZZoDczmppyGJIvQ43l+aZihkaVvmu/21kiyaHeHjiFxjxNNFnUncKmcGIyOojsaw==",
+      "version": "1.56.1",
+      "resolved": "https://registry.npmjs.org/playwright/-/playwright-1.56.1.tgz",
+      "integrity": "sha512-aFi5B0WovBHTEvpM3DzXTUaeN6eN0qWnTkKx4NQaH4Wvcmc153PdaY2UBdSYKaGYw+UyWXSVyxDUg5DoPEttjw==",
       "dev": true,
       "license": "Apache-2.0",
       "dependencies": {
-        "playwright-core": "1.51.1"
+        "playwright-core": "1.56.1"
       },
       "bin": {
         "playwright": "cli.js"
@@ -74,9 +63,9 @@
       }
     },
     "node_modules/playwright-core": {
-      "version": "1.51.1",
-      "resolved": "https://registry.npmjs.org/playwright-core/-/playwright-core-1.51.1.tgz",
-      "integrity": "sha512-/crRMj8+j/Nq5s8QcvegseuyeZPxpQCZb6HNk3Sos3BlZyAknRjoyJPFWkpNn8v0+P3WiwqFF8P+zQo4eqiNuw==",
+      "version": "1.56.1",
+      "resolved": "https://registry.npmjs.org/playwright-core/-/playwright-core-1.56.1.tgz",
+      "integrity": "sha512-hutraynyn31F+Bifme+Ps9Vq59hKuUCz7H1kDOcBs+2oGguKkWTU50bBWrtz34OUWmIwpBTWDxaRPXrIXkgvmQ==",
       "dev": true,
       "license": "Apache-2.0",
       "bin": {
@@ -85,13 +74,6 @@
       "engines": {
         "node": ">=18"
       }
-    },
-    "node_modules/undici-types": {
-      "version": "6.20.0",
-      "resolved": "https://registry.npmjs.org/undici-types/-/undici-types-6.20.0.tgz",
-      "integrity": "sha512-Ny6QZ2Nju20vw1SRHe3d9jVu6gJ+4e3+MMpqu7pqE5HT6WsTSlce++GQmK5UXS8mzV8DSYHrQH+Xrf2jVcuKNg==",
-      "dev": true,
-      "license": "MIT"
     }
   }
 }

php/tests/package.json

@@ -3,6 +3,6 @@
   "version": "1.0.0",
   "license": "AGPL-3.0-or-later",
   "devDependencies": {
-    "@playwright/test": "^1.51.1"
+    "@playwright/test": "^1.56.1"
   }
 }

readme.md

@@ -52,7 +52,8 @@ Included are:
 - Possibility included to [pass the needed device for hardware transcoding](https://github.com/nextcloud/all-in-one#how-to-enable-hardware-acceleration-for-nextcloud) to the Nextcloud container
 - Possibility included to [store all docker related files on a separate drive](https://github.com/nextcloud/all-in-one#how-to-store-the-filesinstallation-on-a-separate-drive)
 - [LDAP can be used as user backend for Nextcloud](https://github.com/nextcloud/all-in-one/tree/main#ldap)
-- Migration from any former Nextcloud installation to AIO is possible. See [this documentation](https://github.com/nextcloud/all-in-one/blob/main/migration.md)
+- Migration from any former Nextcloud installation to AIO is possible. See [this documentation](https://github.com/nextcloud/all-in-one/blob/main/migration.md). 
+- Migration in the other direction (e.g. from AIO to a VM-based installation) is also possible.
 - [Fail2Ban can be added](https://github.com/nextcloud/all-in-one#fail2ban)
 - [phpMyAdmin, Adminer or pgAdmin can be added](https://github.com/nextcloud/all-in-one#phpmyadmin-adminer-or-pgadmin)
 - [Mail server can be added](https://github.com/nextcloud/all-in-one#mail-server)
@@ -85,66 +86,100 @@ Included are:
 | ![image](https://github.com/user-attachments/assets/6ef5d7b5-86f2-402c-bc6c-b633af2ca7dd) | ![image](https://github.com/user-attachments/assets/939d0fdf-436f-433d-82d3-27548263a040) |
 
 ## How to use this?
->[!WARNING]
-> You should first make sure that you are not using docker installed via snap. You can check this by running `sudo docker info | grep "Docker Root Dir" | grep "/var/snap/docker/"`. If the output should contain the mentioned string `/var/snap/docker/`, you should first uninstall docker snap via `sudo snap remove docker` and then follow the instructions below. ⚠️ Attention: only run the command if this is a clean new docker installation and you are not running any service already using this.
 
-> [!NOTE]
-> The following instructions are meant for installations without a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) already being in place. If you want to run AIO behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else), see the [reverse proxy documentation](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md). Also, the instructions below are especially meant for Linux. For macOS see [this](#how-to-run-aio-on-macos), for Windows see [this](#how-to-run-aio-on-windows) and for Synology see [this](#how-to-run-aio-on-synology-dsm).
+The steps below are written for Linux. For platform-specific guidance see:
+- macOS: [How to run AIO on macOS](#how-to-run-aio-on-macos)
+- Windows: [How to run AIO on Windows](#how-to-run-aio-on-windows)
+- Synology DSM: [How to run AIO on Synology DSM](#how-to-run-aio-on-synology-dsm)
+- TrueNAS SCALE: [Can I run AIO on TrueNAS SCALE?](#can-i-run-aio-on-truenas-scale)
 
-1. Install Docker on your Linux installation by following the official documentation: https://docs.docker.com/engine/install/#supported-platforms.
->[!WARNING]
-> You could use the convenience script below to install docker. However we recommend to not blindly download and execute scripts as sudo. But if you feel like it, you can of course use it. See below: 
+> [!IMPORTANT]  
+> These instructions assume there is no existing web server or reverse proxy (for example Apache, Nginx, Caddy, or Cloudflare Tunnel) that you intend to place in front of AIO. If you plan to run AIO behind an existing web server or reverse proxy, follow the AIO reverse proxy documentation: [Reverse proxy docs](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md)
 
-<details>
-    <summary>Using the convenience script</summary>
+You're encouraged to skim the attached [FAQ](#faq). While we've tried to make things straightforward, Nextcloud is a large and flexible platform. Reading the FAQ will save you time, particularly if edge cases come up.
+
+> [!TIP]  
+> Don't worry about getting everything perfect on the first try — test deployments are cheap and disposable.
+
+1. Install Docker on your Linux host by following the official documentation: [Docker install — supported platforms](https://docs.docker.com/engine/install/#supported-platforms)
+
+> [!WARNING]  
+> Snap-based Docker installations are not supported. Make sure you are not using a snap-based Docker installation (generally only applicable to Ubuntu). To check, run:
+> ```sh
+> sudo docker info | grep "Docker Root Dir" | grep "/var/snap/docker/"
+> ```
+> If you see the following output:
+> ```
+> /var/snap/docker/
+> ```
+> you should migrate to a standard Docker installation and remove the snap-based package before proceeding: [Install Docker on Ubuntu](https://docs.docker.com/engine/install/ubuntu/).
+>
+> ⚠️ To avoid losing data or interrupting services, only remove the Docker snap after you are certain you're not running any existing containers in it.
+>
+> Consult the official Docker documentation or other guides for instructions on migrating existing containers. Once you are certain it's safe, remove the snap-based Docker installation with:
+> ```sh
+> sudo snap remove docker
+> ```
+
+2. If you need IPv6 support, enable it by following: [Docker IPv6 support for AIO](https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md)
+
+3. AIO uses a special `mastercontainer` to orchestrate the various pieces of the Nextcloud stack. To start AIO, launch the `mastercontainer` with the command below:
 
 ```sh
-curl -fsSL https://get.docker.com | sudo sh
+# For Linux and without a web server or reverse proxy already in place:
+sudo docker run \
+  --init \
+  --sig-proxy=false \
+  --name nextcloud-aio-mastercontainer \
+  --restart always \
+  --publish 80:80 \
+  --publish 8080:8080 \
+  --publish 8443:8443 \
+  --volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config \
+  --volume /var/run/docker.sock:/var/run/docker.sock:ro \
+  ghcr.io/nextcloud-releases/all-in-one:latest
 ```
 
+<details>
+  <summary>Explanation of the command</summary>
+
+  - `sudo docker run` — starts a new Docker container. Omit `sudo` if your user is in the `docker` group.  
+  - `--init` — runs an init process inside the container to handle zombie processes.  
+  - `--sig-proxy=false` — prevents Ctrl+C in the attached terminal from stopping the container.  
+  - `--name nextcloud-aio-mastercontainer` — the container name. Do not change this name; mastercontainer updates rely on it.  
+  - `--restart always` — ensures the container restarts automatically with the Docker daemon.  
+  - `--publish 80:80` — publishes container port 80 on host port 80 (used for ACME http-challenge when obtaining certificates). Not required if you run AIO behind a reverse proxy.  
+  - `--publish 8080:8080` — publishes the AIO interface (self-signed certificate) on host port 8080. You may map a different host port if 8080 is in use (e.g. `--publish 8081:8080`).  
+  - `--publish 8443:8443` — publishes the AIO interface with a valid certificate on host port 8443 (requires ports 80 and 8443 to be reachable and a domain pointing to your server). Not required if you run AIO behind a reverse proxy.  
+  - `--volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config` — stores mastercontainer configuration in the named Docker volume. Do not change this volume name; built-in backups depend on it.  
+  - `--volume /var/run/docker.sock:/var/run/docker.sock:ro` — mounts the Docker socket (read-only) so the mastercontainer can manage other containers. On Windows/macOS or when using rootless Docker, this path may need adjustment; see the platform-specific docs. If you change the socket path, also set `WATCHTOWER_DOCKER_SOCKET_PATH` accordingly. If you prefer not to expose the socket, see the manual-install documentation: [Manual install without docker socket access](https://github.com/nextcloud/all-in-one/tree/main/manual-install)  
+  - `ghcr.io/nextcloud-releases/all-in-one:latest` — the mastercontainer image.
+
+  Additional options can be set with environment variables (for example `--env NEXTCLOUD_DATADIR="/mnt/ncdata"` to change Nextcloud's datadir on first startup). See the Customization section and example compose file: [compose.yaml](https://github.com/nextcloud/all-in-one/blob/main/compose.yaml) for more options.
 </details>
 
-2. If you need ipv6 support, you should enable it by following https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md.
-3. Run the command below in order to start the container on Linux and without a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) already in place:
-    ```
-    # For Linux and without a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) already in place:
-    sudo docker run \
-    --init \
-    --sig-proxy=false \
-    --name nextcloud-aio-mastercontainer \
-    --restart always \
-    --publish 80:80 \
-    --publish 8080:8080 \
-    --publish 8443:8443 \
-    --volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config \
-    --volume /var/run/docker.sock:/var/run/docker.sock:ro \
-    ghcr.io/nextcloud-releases/all-in-one:latest
-    ```
-    <details>
-    <summary>Explanation of the command</summary>
+> [!TIP]
+> If you want Nextcloud’s data directory in a different location than the default Docker volume, see "How to change the default location of Nextcloud's Datadir" in this README: [How to change the default location of Nextcloud's Datadir](#how-to-change-the-default-location-of-nextclouds-datadir)
 
-    - `sudo docker run` This command spins up a new docker container. Docker commands can optionally be used without `sudo` if the user is added to the docker group (this is not the same as docker rootless, see FAQ below).
-    - `--init` This option makes sure that no zombie-processes are created, ever. See [the Docker documentation](https://docs.docker.com/reference/cli/docker/container/run/#init).
-    - `--sig-proxy=false` This option allows to exit the container shell that gets attached automatically when using `docker run` by using `[CTRL] + [C]` without shutting down the container.
-    - `--name nextcloud-aio-mastercontainer` This is the name of the container. This line is not allowed to be changed, since mastercontainer updates would fail.
-    - `--restart always` This is the "restart policy". `always` means that the container should always get started with the Docker daemon. See the Docker documentation for further detail about restart policies: https://docs.docker.com/config/containers/start-containers-automatically/
-    - `--publish 80:80` This means that port 80 of the container should get published on the host using port 80. It is used for getting valid certificates for the AIO interface if you want to use port 8443. It is not needed if you run AIO behind a web server or reverse proxy and can get removed in that case as you can simply use port 8080 for the AIO interface then.
-    - `--publish 8080:8080` This means that port 8080 of the container should get published on the host using port 8080. This port is used for the AIO interface and uses a self-signed certificate by default. You can also use a different host port if port 8080 is already used on your host, for example `--publish 8081:8080` (only the first port can be changed for the host, the second port is for the container and must remain at 8080).
-    - `--publish 8443:8443` This means that port 8443 of the container should get published on the host using port 8443. If you publish port 80 and 8443 to the public internet, you can access the AIO interface via this port with a valid certificate. It is not needed if you run AIO behind a web server or reverse proxy and can get removed in that case as you can simply use port 8080 for the AIO interface then.
-    - `--volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config` This means that the files that are created by the mastercontainer will be stored in a docker volume that is called `nextcloud_aio_mastercontainer`. This line is not allowed to be changed, since built-in backups would fail later on.
-    - `--volume /var/run/docker.sock:/var/run/docker.sock:ro` The docker socket is mounted into the container which is used for spinning up all the other containers and for further features. It needs to be adjusted on Windows/macOS and on docker rootless. See the applicable documentation on this. If adjusting, don't forget to also set `WATCHTOWER_DOCKER_SOCKET_PATH`! If you dislike this, see https://github.com/nextcloud/all-in-one/tree/main/manual-install.
-    - `ghcr.io/nextcloud-releases/all-in-one:latest` This is the docker container image that is used.
-    - Further options can be set using environment variables, for example `--env NEXTCLOUD_DATADIR="/mnt/ncdata"` (This is an example for Linux. See [this](https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir) for other OS' and for an explanation of what this value does. This specific one needs to be specified upon the first startup if you want to change it to a specific path instead of the default Docker volume). To see explanations and examples for further variables (like changing the location of Nextcloud's datadir or mounting some locations as external storage into the Nextcloud container), read through this readme and look at the docker-compose file: https://github.com/nextcloud/all-in-one/blob/main/compose.yaml
-    </details>
+> [!NOTE]
+> For production usage (and ease of upgrades and changes), we suggest using the example [Compose file](https://github.com/nextcloud/all-in-one/blob/main/compose.yaml) rather than `docker run`.
 
-    Note: You may be interested in adjusting Nextcloud’s datadir to store the files in a different location than the default docker volume. See [this documentation](https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir) on how to do it.
+4. After the initial startup, open the Nextcloud AIO interface on port 8080 of this server **by IP address**, for example:
+```txt
+https://192.168.5.5:8080
+```
 
-4. After the initial startup, you should be able to open the Nextcloud AIO Interface now on port 8080 of this server.<br>
-E.g. `https://ip.address.of.this.server:8080`<br>
-⚠️ **Important:** do always use an ip-address if you access this port and not a domain as HSTS might block access to it later! (It is also expected that this port uses a self-signed certificate due to security concerns which you need to accept in your browser)<br><br>
-If your firewall/router has port 80 and 8443 open/forwarded and you point a domain to your server, you can get a valid certificate automatically by opening the Nextcloud AIO Interface via:<br>
-`https://your-domain-that-points-to-this-server.tld:8443`
-5. Please do not forget to open port `3478/TCP` and `3478/UDP` in your firewall/router for the Talk container!
+> [!CAUTION]
+> Use an IP address (not a domain) when accessing the AIO interface on port 8080. Accessing via a domain may work temporarily but is likely to break later due to HSTS.
+
+Port 8080 uses a self-signed certificate that you must accept in your browser.
+
+It is also possible to obtain a valid certificate automatically if your firewall/router forwards ports 80 and 8443 and you point a domain to your server. In that case, access the AIO interface using the dedicated port for this purpose (8443), for example:
+```txt
+https://your-domain-that-points-to-this-server.tld:8443
+```
+
+5. If you enable Nextcloud Talk, open port `3478/TCP` and `3478/UDP` in your firewall/router for the Talk (TURN) container.
 
 # FAQ
 - [TOC](#faq)
@@ -359,7 +394,7 @@ You can adjust the MTU size of the docker network by creating it beforehand with
 ```
 docker network create --driver bridge --opt com.docker.network.driver.mtu=1440 nextcloud-aio
 ```
-When you open the AIO interface for the first time after you execute the `docker run` command, it will automatically connect to the `aio-nextcloud` network with the custom MTU. Keep in mind that if you previously started the mastercontainer without creating the network with the extra options, you will need to remove the old `aio-nextcloud` network and recreate it with the new configuration.
+When you open the AIO interface for the first time after you execute the `docker run` command, it will automatically connect to the `nextcloud-aio` network with the custom MTU. Keep in mind that if you previously started the mastercontainer without creating the network with the extra options, you will need to remove the old `nextcloud-aio` network and recreate it with the new configuration.
 
 If you want to use docker compose, you can check out the comments in the `compose.yaml` file for more details.
 
@@ -523,7 +558,11 @@ The Fulltextsearch Java options are by default set to `-Xms512M -Xmx512M` which
 ## Guides
 
 ### How to run AIO on macOS?
-On macOS, there is only one thing different in comparison to Linux: instead of using `--volume /var/run/docker.sock:/var/run/docker.sock:ro`, you need to use `--volume /var/run/docker.sock.raw:/var/run/docker.sock:ro` to run it after you installed [Docker Desktop](https://www.docker.com/products/docker-desktop/) (and don't forget to [enable ipv6](https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md) if you should need that). Apart from that it should work and behave the same like on Linux.
+
+> [!NOTE]
+> On macOS, it is recommended to use OrbStack instead of Docker Desktop which has much better compatibility with docker for Linux compared to Docker Desktop. See https://orbstack.dev/
+
+Generally, on macOS, there is only one thing different for the docker run command in comparison to Linux: instead of using `--volume /var/run/docker.sock:/var/run/docker.sock:ro`, you need to use `--volume /var/run/docker.sock.raw:/var/run/docker.sock:ro` to run it after you installed [Docker Desktop](https://www.docker.com/products/docker-desktop/) (and don't forget to [enable ipv6](https://github.com/nextcloud/all-in-one/blob/main/docker-ipv6-support.md) if you should need that). Apart from that it should work and behave the same like on Linux.
 
 Also, you may be interested in adjusting Nextcloud's Datadir to store the files on the host system. See [this documentation](https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir) on how to do it.
 

reverse-proxy.md

@@ -544,7 +544,9 @@ Also change `<you>@<your-mail-provider-domain>` to a mail address of yours.
 
 <summary>click here to expand</summary>
 
-Unfortunately, it is not possible to configure Nginx-proxy in a way that works because it completely relies on environmental variables of the docker containers itself. Providing these variables does not work as stated above.
+This section refers to the dedicated project named `nginx-proxy`. See its [GitHub repo](https://github.com/nginx-proxy/nginx-proxy). If you should be looking for Nginx, see the `Nginx, Freenginx, Openresty, Angie` section in this docu.
+
+Unfortunately, it is not possible to configure `nginx-proxy` in a way that works because it completely relies on environmental variables of the docker containers itself. Providing these variables does not work as stated above.
 
 If you really want to use AIO, we recommend you to switch to caddy. It is simply amazing!<br>