adjust some details

Signed-off-by: Simon L. <szaimen@e.mail.de>

.github/workflows/codespell.yml

@@ -12,7 +12,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
       - name: Check spelling
         uses: codespell-project/actions-codespell@406322ec52dd7b488e48c1c4b82e2a8b3a1bf630 # v2
         with:

.github/workflows/community-containers.yml

@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
       - name: Validate structure
         run: |
           CONTAINERS="$(find ./community-containers -mindepth 1 -maxdepth 1 -type d)"

.github/workflows/dependency-updates.yml

@@ -10,8 +10,8 @@ jobs:
     name: Run dependency update script
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
-    - uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+    - uses: actions/checkout@v5
+    - uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
       with:
         php-version: 8.4
         extensions: apcu

.github/workflows/docker-lint.yml

@@ -25,7 +25,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Install hadolint
         run: |

.github/workflows/helm-release.yml

@@ -13,10 +13,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Turnstyle
-        uses: softprops/turnstyle@807f6009e7cee5c2c9faa41ccef03a8bb24b06ab # v2
+        uses: softprops/turnstyle@bff843227669a0c34c7f791ebd53a4b7c2a3febd # v2
         with:
           continue-after-seconds: 180
         env:

.github/workflows/imaginary-update.yml

@@ -10,7 +10,7 @@ jobs:
     name: update to latest imaginary commit on master branch
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v5
     - name: Run imaginary-update
       run: |
         # Imaginary

.github/workflows/json-validator.yml

@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
       - name: Validate Json
         run: |
           sudo apt-get update

.github/workflows/lint-helm.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 

.github/workflows/lint-php.yml

@@ -33,10 +33,10 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
+        uses: actions/checkout@ff7abcd0c3c05ccf6adc123a8cd1fd4fb30fb493 # v4.1.1
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: ${{ matrix.php-versions }}
           coverage: none

.github/workflows/nextcloud-update.yml

@@ -11,7 +11,7 @@ jobs:
     name: Run nextcloud-update script
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v5
     - name: Run nextcloud-update script
       run: |
         # Inspired by https://github.com/nextcloud/docker/blob/master/update.sh

.github/workflows/php-deprecation-detector.yml

@@ -16,9 +16,9 @@ jobs:
     name: PHP Deprecation Detector
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
       - name: Set up php
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/playwright.yml

@@ -13,9 +13,9 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
 
-      - uses: actions/setup-node@v4
+      - uses: actions/setup-node@v5
         with:
           node-version: lts/*
 

.github/workflows/psalm-update-baseline.yml

@@ -10,10 +10,10 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
 
       - name: Set up php
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/psalm.yml

@@ -26,10 +26,10 @@ jobs:
     name: static-psalm-analysis
     steps:
       - name: Checkout
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
+        uses: actions/checkout@ff7abcd0c3c05ccf6adc123a8cd1fd4fb30fb493 # v4.1.1
 
       - name: Set up php
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/shellcheck.yml

@@ -15,7 +15,7 @@ jobs:
     name: Check Shell
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v5
     - name: Run Shellcheck
       uses: ludeeus/action-shellcheck@00cae500b08a931fb5698e11e79bfbd38e612a38 # v2.0.0
       with:

.github/workflows/talk.yml

@@ -10,7 +10,7 @@ jobs:
     name: update talk
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v5
     - name: Run talk-container-update
       run: |
         # Recording

.github/workflows/twig-lint.yml

@@ -24,10 +24,10 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@ec406be512d7077f68eed36e63f4d91bc006edc4 # v2
+        uses: shivammathur/setup-php@bf6b4fbd49ca58e4608c9c89fba0b8d90bd2a39f # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/update-copyright.yml

@@ -8,4 +8,4 @@ jobs:
     name: update copyright
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5

.github/workflows/update-helm.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
       - name: update helm chart
         run: |
           set -x

.github/workflows/update-yaml.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
       - name: update yaml files
         run: |
           sudo bash manual-install/update-yaml.sh

Containers/apache/Caddyfile

@@ -15,6 +15,7 @@
 }
 
 https://{$ADDITIONAL_TRUSTED_DOMAIN}:443,
+http://{$APACHE_HOST}:23973, # For Collabora callback and WOPI requests, see containers.json
 {$PROTOCOL}://{$NC_DOMAIN}:{$APACHE_PORT} {
     header -Server
     header -X-Powered-By

Containers/collabora/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/blob/master/docker/from-packages/Dockerfile
-FROM collabora/code:25.04.5.1.1
+FROM collabora/code:25.04.5.2.1
 
 USER root
 ARG DEBIAN_FRONTEND=noninteractive

Containers/fulltextsearch/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from here https://github.com/elastic/elasticsearch/blob/main/distribution/docker/src/docker/Dockerfile
-FROM elasticsearch:8.19.2
+FROM elasticsearch:8.19.4
 
 USER root
 

Containers/imaginary/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM golang:1.25.0-alpine3.22 AS go
+FROM golang:1.25.1-alpine3.22 AS go
 
 ENV IMAGINARY_HASH=1d4e251cfcd58ea66f8361f8721d7b8cc85002a3
 

Containers/mastercontainer/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:28.3.3-cli AS docker
+FROM docker:28.4.0-cli AS docker
 
 # Caddy is a requirement
 FROM caddy:2.10.2-alpine AS caddy
@@ -49,7 +49,7 @@ RUN set -ex; \
     apk add --no-cache --virtual .build-deps \
         autoconf \
         build-base; \
-    pecl install APCu-5.1.26; \
+    pecl install APCu-5.1.27; \
     docker-php-ext-enable apcu; \
     rm -r /tmp/pear; \
     runDeps="$( \

Containers/nextcloud/Dockerfile

@@ -8,7 +8,7 @@ ENV SOURCE_LOCATION=/usr/src/nextcloud
 ENV REDIS_DB_INDEX=0
 
 # AIO settings start # Do not remove or change this line!
-ENV NEXTCLOUD_VERSION=31.0.8
+ENV NEXTCLOUD_VERSION=31.0.9
 ENV AIO_TOKEN=123456
 ENV AIO_URL=localhost
 # AIO settings end # Do not remove or change this line!
@@ -83,7 +83,7 @@ RUN set -ex; \
     \
 # pecl will claim success even if one install fails, so we need to perform each install separately
     pecl install -o igbinary-3.2.16; \
-    pecl install APCu-5.1.26; \
+    pecl install APCu-5.1.27; \
     pecl install -D 'enable-memcached-igbinary="yes"' memcached-3.3.0; \
     pecl install -oD 'enable-redis-igbinary="yes" enable-redis-zstd="yes" enable-redis-lz4="yes"' redis-6.2.0; \
    pecl install -o imagick-3.8.0; \

Containers/nextcloud/entrypoint.sh

@@ -198,6 +198,18 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
         echo "Initializing nextcloud $image_version ..."
         rsync -rlD --delete --exclude-from=/upgrade.exclude "$SOURCE_LOCATION/" /var/www/html/
 
+        # Copy custom_apps from Nextcloud archive
+        if ! directory_empty "$SOURCE_LOCATION/custom_apps"; then
+            set -x
+            for app in "$SOURCE_LOCATION/custom_apps"/*; do
+                app_id="$(basename "$app")"
+                mkdir -p "/var/www/html/custom_apps/$app_id"
+                rsync -rlD --delete --include "/$app_id/" --exclude '/*' "$SOURCE_LOCATION/custom_apps/" /var/www/html/custom_apps/
+            done
+            set +x
+        fi
+
+        # Copy over initial data from Nextcloud archive
         for dir in config data custom_apps themes; do
             if [ ! -d "/var/www/html/$dir" ] || directory_empty "/var/www/html/$dir"; then
                 rsync -rlD --include "/$dir/" --exclude '/*' "$SOURCE_LOCATION/" /var/www/html/
@@ -356,7 +368,7 @@ DATADIR_PERMISSION_CONF
                 read -ra STARTUP_APPS_ARRAY <<< "$STARTUP_APPS"
                 for app in "${STARTUP_APPS_ARRAY[@]}"; do
                     if ! echo "$app" | grep -q '^-'; then 
-                        if [ -z "$(find /var/www/html/apps -type d -maxdepth 1 -mindepth 1 -name "$app" )" ]; then
+                        if [ -z "$(find /var/www/html/apps /var/www/html/custom_apps -type d -maxdepth 1 -mindepth 1 -name "$app" )" ]; then
                             # If not shipped, install and enable the app
                             php /var/www/html/occ app:install "$app"
                         else

Containers/talk/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM nats:2.11.8-scratch AS nats
+FROM nats:2.11.9-scratch AS nats
 FROM eturnal/eturnal:1.12.1 AS eturnal
 FROM strukturag/nextcloud-spreed-signaling:2.0.4 AS signaling
 FROM alpine:3.22.1 AS janus

Containers/watchtower/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM ghcr.io/nicholas-fedor/watchtower:v1.11.7 AS watchtower
+FROM ghcr.io/nicholas-fedor/watchtower:1.11.8 AS watchtower
 
 FROM alpine:3.22.1
 

Containers/whiteboard/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/nextcloud/whiteboard/blob/main/Dockerfile
-FROM ghcr.io/nextcloud-releases/whiteboard:v1.1.3
+FROM ghcr.io/nextcloud-releases/whiteboard:v1.2.0
 
 USER root
 RUN set -ex; \

community-containers/caddy/caddy.json

@@ -23,7 +23,8 @@
             "environment": [
                 "TZ=%TIMEZONE%",
                 "NC_DOMAIN=%NC_DOMAIN%",
-                "APACHE_PORT=%APACHE_PORT%"
+                "APACHE_PORT=%APACHE_PORT%",
+                "NEXTCLOUD_EXPORTER_CADDY_PASSWORD=%NEXTCLOUD_EXPORTER_CADDY_PASSWORD%"
             ],
             "volumes": [
                 {
@@ -37,6 +38,9 @@
                     "writeable": false
                 }
             ],
+            "secrets": [
+                "NEXTCLOUD_EXPORTER_CADDY_PASSWORD"
+            ],
             "aio_variables": [
                 "apache_ip_binding=@INTERNAL",
                 "apache_port=11000"

community-containers/caddy/readme.md

@@ -1,5 +1,5 @@
 ## Caddy with geoblocking
-This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed.
+This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed. It also covers [nextcloud-exporter](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter) by listening on `metrics.$NC_DOMAIN`, if installed.
 
 ### Notes
 - This container is incompatible with the [npmplus](https://github.com/nextcloud/all-in-one/tree/main/community-containers/npmplus) community container. So make sure that you do not enable both at the same time!
@@ -10,6 +10,7 @@ This container bundles caddy and auto-configures it for you. It also covers [vau
 - If you want to use this with [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap), make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
 - If you want to use this with [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb), make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
 - If you want to use this with [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr), make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
+- If you want to use this with [nextcloud-exporter](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter), make sure that you point `metrics.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nextcloud-exporter.
 - After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
 - You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack

community-containers/facerecognition/facerecognition.json

@@ -10,18 +10,21 @@
             "restart": "unless-stopped",
             "environment": [
                 "TZ=%TIMEZONE%",
-                "API_KEY=some-super-secret-api-key",
+                "API_KEY=%FACERECOGNITION_API_KEY%",
                 "FACE_MODEL=3"
             ],
             "aio_variables": [
                 "nextcloud_memory_limit=2048M"
             ],
+            "secrets": [
+                "FACERECOGNITION_API_KEY"
+            ],
             "enable_nvidia_gpu": false,
             "nextcloud_exec_commands": [
                 "php /var/www/html/occ app:install facerecognition",
                 "php /var/www/html/occ app:enable facerecognition", 
                 "php /var/www/html/occ config:system:set facerecognition.external_model_url --value nextcloud-aio-facerecognition:5000",
-                "php /var/www/html/occ config:system:set facerecognition.external_model_api_key --value some-super-secret-api-key",
+                "php /var/www/html/occ config:system:set facerecognition.external_model_api_key --value %FACERECOGNITION_API_KEY%",
                 "php /var/www/html/occ face:setup -m 5",
                 "php /var/www/html/occ face:setup -M 1G",
                 "php /var/www/html/occ config:app:set facerecognition analysis_image_area --value 4320000",

community-containers/languagetool/languagetool.json

@@ -0,0 +1,16 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-languagetool",
+            "display_name": "LanguageTool for Collabora",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/languagetool",
+            "image": "erikvl87/languagetool",
+            "image_tag": "latest",
+            "internal_port": "8010",
+            "restart": "unless-stopped",
+            "environment": [
+                "TZ=%TIMEZONE%"
+            ]
+        }
+    ]
+}

community-containers/languagetool/readme.md

@@ -0,0 +1,13 @@
+## LanguageTool for Collabora
+This container bundles a LanguageTool for Collabora which adds spell checking functionality to Collabora.
+
+### Notes
+- Make sure to have collabora enabled via the AIO interface
+- After adding this container via the AIO Interface, while all containers are still stopped, you need to scroll down to the `Additional Collabora options` section and enter `--o:languagetool.enabled=true --o:languagetool.base_url=http://nextcloud-aio-languagetool:8010/v2`.
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/Erikvl87/docker-languagetool
+
+### Maintainer
+https://github.com/szaimen

community-containers/nextcloud-exporter/nextcloud-exporter.json

@@ -0,0 +1,35 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-nextcloud-exporter",
+            "display_name": "Prometheus Nextcloud Exporter",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter",
+            "image": "ghcr.io/xperimental/nextcloud-exporter",
+            "image_tag": "0.8.0",
+            "internal_port": "9205",
+            "restart": "unless-stopped",
+            "ports": [
+                {
+                  "ip_binding": "127.0.0.1",
+                  "port_number": "9205",
+                  "protocol": "tcp"
+                }
+            ],
+            "environment": [
+                "TZ=%TIMEZONE%",
+                "NEXTCLOUD_SERVER=https://%NC_DOMAIN%",
+                "NEXTCLOUD_AUTH_TOKEN=%NEXTCLOUD_EXPORTER_TOKEN%",
+                "NEXTCLOUD_LISTEN_ADDRESS=0.0.0.0:9205",
+                "NEXTCLOUD_TIMEOUT=5s"
+            ],
+            "ui_secret": "NEXTCLOUD_EXPORTER_CADDY_PASSWORD",
+            "secrets": [
+                "NEXTCLOUD_EXPORTER_TOKEN",
+                "NEXTCLOUD_EXPORTER_CADDY_PASSWORD"
+            ],
+            "nextcloud_exec_commands": [
+                "php /var/www/html/occ config:app:set serverinfo token --value %NEXTCLOUD_EXPORTER_TOKEN%"
+            ]
+        }
+    ]
+}

community-containers/nextcloud-exporter/readme.md

@@ -0,0 +1,72 @@
+## Prometheus Nextcloud Exporter
+
+A Prometheus exporter that collects metrics from your Nextcloud instance for monitoring and alerting.
+
+### How to install
+
+See the [Community Containers documentation](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) for instructions on how to install this in your Nextcloud All-in-One setup.
+
+### Security & Access
+
+**Important:** This container is configured to bind only to `127.0.0.1` (localhost) for security reasons. Prometheus exporters typically don't include authentication, so direct network exposure is not recommended.
+
+#### Access Options
+
+1. **With Caddy Container (Recommended)**: If you also install the [Caddy community container](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy), it will automatically configure secure HTTPS access to your metrics with authentication at `metrics.your-domain.com`
+
+   **Getting Authentication Credentials**: 
+   - **Username**: Always `metrics`
+   - **Password**: After deploying the nextcloud-exporter container, the automatically generated password will be displayed in the AIO interface. Look for it in the container section below the container name "Prometheus Nextcloud Exporter". 
+
+2. **Custom Reverse Proxy**: Set up your own reverse proxy (nginx, Apache, etc.) to provide HTTPS and authentication. See configuration guides:
+   - [NGINX Authentication](https://nginx.org/en/docs/http/ngx_http_auth_basic_module.html) + [Reverse Proxy](https://docs.nginx.com/nginx/admin-guide/web-server/reverse-proxy/)
+   - [Apache Authentication](https://httpd.apache.org/docs/2.4/howto/auth.html) + [Reverse Proxy](https://httpd.apache.org/docs/2.4/mod/mod_proxy.html)
+   - [Traefik BasicAuth](https://doc.traefik.io/traefik/middlewares/http/basicauth/)
+   - [Prometheus Security Best Practices](https://prometheus.io/docs/operating/security/)
+
+3. **Direct Local Access**: Access metrics directly from the server at `http://127.0.0.1:9205/metrics` (no authentication)
+
+### What it monitors
+- User activity (active users hourly, daily)
+- File counts and storage usage
+- System health and database size
+- App statistics and update availability
+- Nextcloud performance metrics
+
+### Prometheus Configuration
+
+For **local server access** (if Prometheus runs on the same server):
+```yaml
+scrape_configs:
+  - job_name: 'nextcloud'
+    scrape_interval: 90s
+    static_configs:
+      - targets: ['127.0.0.1:9205']
+    metrics_path: /metrics
+    scheme: http
+```
+
+For **Caddy integration** (secure external access):
+```yaml
+scrape_configs:
+  - job_name: 'nextcloud'
+    scrape_interval: 90s
+    static_configs:
+      - targets: ['metrics.your-domain.com']
+    metrics_path: /
+    scheme: https
+    basic_auth:
+      username: 'metrics'
+      password: 'your-generated-password'
+```
+
+### Visualization
+
+Compatible with Grafana for creating monitoring dashboards:
+- Pre-built dashboard available: [Grafana Dashboard #20716](https://grafana.com/grafana/dashboards/20716-nextcloud/)
+
+### Repository
+https://github.com/xperimental/nextcloud-exporter
+
+### Maintainer
+https://github.com/grotax

community-containers/overleaf/overleaf.json

@@ -0,0 +1,101 @@
+{
+  "aio_services_v1": [
+    {
+      "container_name": "nextcloud-aio-overleaf",
+      "display_name": "Overleaf",
+      "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/overleaf",
+      "image": "sharelatex/sharelatex",
+      "image_tag": "5",
+      "internal_port": "8050",
+      "restart": "unless-stopped",
+      "depends_on": [
+        "nextcloud-aio-overleaf-mongo",
+        "nextcloud-aio-overleaf-redis"
+      ],
+      "ports": [
+        {
+          "ip_binding": "%APACHE_IP_BINDING%",
+          "port_number": "8050",
+          "protocol": "tcp"
+        }
+      ],
+      "environment": [
+        "TZ=%TIMEZONE%",
+        "OVERLEAF_MONGO_URL=mongodb://nextcloud-aio-overleaf-mongo/sharelatex",
+        "OVERLEAF_REDIS_HOST=nextcloud-aio-overleaf-redis",
+        "REDIS_HOST=nextcloud-aio-overleaf-redis",
+        "OVERLEAF_APP_NAME='Overleaf Community Edition'",
+        "ENABLED_LINKED_FILE_TYPES=project_file,project_output_file",
+        "ENABLE_CONVERSIONS=true",
+        "EMAIL_CONFIRMATION_DISABLED=true",
+        "OVERLEAF_SITE_URL=https://overleaf.%NC_DOMAIN%",
+        "WEB_PORT=8050"
+      ],
+      "volumes": [
+        {
+          "source": "nextcloud_aio_overleaf",
+          "destination": "/var/lib/overleaf",
+          "writeable": true
+        }
+      ],
+      "backup_volumes": [
+        "nextcloud_aio_overleaf"
+      ],
+      "nextcloud_exec_commands": [
+        "echo 'Installing integration_overleaf app...'",
+        "php /var/www/html/occ app:install integration_overleaf",
+        "php /var/www/html/occ app:enable integration_overleaf",
+        "echo 'Configuring overleaf url...'",
+        "php /var/www/html/occ config:app:set overleaf_server --value https://overleaf.%NC_DOMAIN%"
+      ]
+    },
+    {
+      "container_name": "nextcloud-aio-overleaf-redis",
+      "display_name": "Overleaf Redis",
+      "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/overleaf",
+      "image": "redis",
+      "image_tag": "6.2",
+      "internal_port": "6379",
+      "restart": "unless-stopped",
+      "environment": [
+        "TZ=%TIMEZONE%"
+      ],
+      "volumes": [
+        {
+          "source": "nextcloud_aio_overleaf_redis",
+          "destination": "/data",
+          "writeable": true
+        }
+      ]
+    },
+    {
+      "container_name": "nextcloud-aio-overleaf-mongo",
+      "display_name": "Overleaf MongoDB",
+      "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/overleaf",
+      "image": "mongo",
+      "image_tag": "6.0",
+      "internal_port": "27017",
+      "restart": "unless-stopped",
+      "environment": [
+        "TZ=%TIMEZONE%",
+        "MONGO_INITDB_DATABASE=sharelatex"
+      ],
+      "command": "--replSet overleaf",
+      "volumes": [
+        {
+          "source": "nextcloud_aio_overleaf_mongo",
+          "destination": "/data/db",
+          "writeable": true
+        },
+                {
+          "source": "./bin/shared/mongodb-init-replica-set.js",
+          "destination": "/docker-entrypoint-initdb.d/mongodb-init-replica-set.js",
+          "writeable": false
+        }
+      ],
+      "backup_volumes": [
+        "nextcloud_aio_overleaf_mongo"
+      ]
+    }
+  ]
+}

community-containers/overleaf/readme.md

@@ -0,0 +1,16 @@
+## Overleaf (Community Edition)
+This community container deploys Overleaf CE with its required MongoDB and Redis services.
+
+### Notes
+- After adding and starting the container, you can directly visit http://ip.address.of.server:8050/ to access your new Overleaf instance.
+- To access Overleaf outside your local network with HTTPS, set up a reverse proxy in front of AIO. You can either follow the generic reverse proxy guide: https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md or use the community Caddy container which can be adjusted to forward a subdomain like `overleaf.$NC_DOMAIN` to port 8050 on this server.
+- Initial user/admin creation is handled inside Overleaf. This container does not integrate Overleaf authentication with Nextcloud users.
+- If you run a firewall (e.g., ufw), ensure port 8050 is allowed or that your reverse proxy can reach it locally.
+- The data directories for Overleaf and MongoDB are persisted and included in AIO backups automatically.
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers for how to add it to the AIO stack.
+
+### Repository
+https://github.com/overleaf/overleaf
+
+### Maintainer
+https://github.com/docjyj

compose.yaml

@@ -1,8 +1,8 @@
 services:
   nextcloud-aio-mastercontainer:
-    image: ghcr.io/nextcloud-releases/all-in-one:latest
-    init: true
-    restart: always
+    image: ghcr.io/nextcloud-releases/all-in-one:latest # This is the container image used. You can switch to ghcr.io/nextcloud-releases/all-in-one:beta if you want to help testing new releases. See https://github.com/nextcloud/all-in-one#how-to-switch-the-channel
+    init: true # This setting makes sure that signals from main process inside the container are correctly forwarded to children. See https://docs.docker.com/reference/compose-file/services/#init
+    restart: always # This makes sure that the container starts always together with the host OS. See https://docs.docker.com/reference/compose-file/services/#restart
     container_name: nextcloud-aio-mastercontainer # This line is not allowed to be changed as otherwise AIO will not work correctly
     volumes:
       - nextcloud_aio_mastercontainer:/mnt/docker-aio-config # This line is not allowed to be changed as otherwise the built-in backup solution will not work
@@ -11,9 +11,9 @@ services:
     # networks: ["nextcloud-aio"]
     ports:
       - 80:80 # Can be removed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
-      - 8080:8080
+      - 8080:8080 # This is the AIO interface, served via https and self-signed certificate. See https://github.com/nextcloud/all-in-one#explanation-of-used-ports
       - 8443:8443 # Can be removed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
-    # security_opt: ["label:disable"] # Is needed when using SELinux
+    # security_opt: ["label:disable"] # Is needed when using SELinux. See https://github.com/nextcloud/all-in-one#are-there-known-problems-when-selinux-is-enabled
     # environment: # Is needed when using any of the options below
       # AIO_DISABLE_BACKUP_SECTION: false # Setting this to true allows to hide the backup section in the AIO interface. See https://github.com/nextcloud/all-in-one#how-to-disable-the-backup-section
       # APACHE_PORT: 11000 # Is needed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
@@ -39,7 +39,7 @@ services:
       # WATCHTOWER_DOCKER_SOCKET_PATH: /var/run/docker.sock # Needs to be specified if the docker socket on the host is not located in the default '/var/run/docker.sock'. Otherwise mastercontainer updates will fail. For macos it needs to be '/var/run/docker.sock'
 
 #   # Optional: Caddy reverse proxy. See https://github.com/nextcloud/all-in-one/discussions/575
-#   # Alternatively, use Tailscale if you don't have a domain yet. See https://github.com/nextcloud/all-in-one/discussions/5439
+#   # Alternatively, use Tailscale if you don't have a domain yet. See https://github.com/nextcloud/all-in-one/discussions/6817
 #   # Hint: You need to uncomment APACHE_PORT: 11000 above, adjust cloud.example.com to your domain and uncomment the necessary docker volumes at the bottom of this file in order to make it work
 #   # You can find further examples here: https://github.com/nextcloud/all-in-one/discussions/588
 #   caddy:

local-instance.md

@@ -9,7 +9,7 @@ It is possible due to several reasons that you do not want or cannot open Nextcl
 - [5. Buy a certificate and use that](#5-buy-a-certificate-and-use-that)
 
 ## 1. Tailscale
-This is the recommended way. For a reverse proxy example guide for Tailscale, see this guide by @flll: https://github.com/nextcloud/all-in-one/discussions/5439
+This is the recommended way. For a reverse proxy example guide for Tailscale, see this guide by [@Perseus333](https://github.com/Perseus333): https://github.com/nextcloud/all-in-one/discussions/6817
 
 ## 2. The normal way
 The normal way is the following:

manual-install/latest.yml

@@ -255,7 +255,7 @@ services:
     expose:
       - "9980"
     environment:
-      - aliasgroup1=https://${NC_DOMAIN}:443
+      - aliasgroup1=https://${NC_DOMAIN}:443,http://nextcloud-aio-apache:23973
       - extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:logging.level_startup=warning --o:home_mode.enable=true --o:remote_font_config.url=https://${NC_DOMAIN}/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+
       - dictionaries=${COLLABORA_DICTIONARIES}
       - TZ=${TIMEZONE}

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 11.6.0
+version: 11.9.0
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -61,7 +61,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: WHITEBOARD_HOST
               value: nextcloud-aio-whiteboard
-          image: ghcr.io/nextcloud-releases/aio-apache:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-apache:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -36,7 +36,7 @@ spec:
         {{- end }}
       initContainers:
         - name: init-subpath
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250927_081431
           command:
             - mkdir
             - "-p"
@@ -59,7 +59,7 @@ spec:
               value: "{{ .Values.NEXTCLOUD_UPLOAD_LIMIT }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-clamav:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-clamav:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -28,14 +28,14 @@ spec:
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
             - name: aliasgroup1
-              value: https://{{ .Values.NC_DOMAIN }}:443
+              value: https://{{ .Values.NC_DOMAIN }}:443,http://nextcloud-aio-apache:23973
             - name: dictionaries
               value: "{{ .Values.COLLABORA_DICTIONARIES }}"
             - name: extra_params
               value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:logging.level_startup=warning --o:home_mode.enable=true --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: ghcr.io/nextcloud-releases/aio-collabora:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-collabora:20250927_081431
           readinessProbe:
             exec:
               command:
@@ -61,5 +61,7 @@ spec:
               add:
                 - MKNOD
                 - CAP_SYS_ADMIN
+                - SYS_CHROOT
+                - FOWNER
                 - CHOWN
 {{- end }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -35,7 +35,7 @@ spec:
         {{- end }}
       initContainers:
         - name: init-subpath
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250927_081431
           command:
             - mkdir
             - "-p"
@@ -64,7 +64,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-postgresql:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-postgresql:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -24,7 +24,7 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250927_081431
           command:
             - chmod
             - "777"
@@ -54,7 +54,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: ghcr.io/nextcloud-releases/aio-fulltextsearch:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-fulltextsearch:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -38,7 +38,7 @@ spec:
               value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-imaginary:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-imaginary:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -38,7 +38,7 @@ spec:
 # AIO settings start # Do not remove or change this line!
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250927_081431
           command:
             - chmod
             - "777"
@@ -188,7 +188,7 @@ spec:
               value: "{{ .Values.WHITEBOARD_ENABLED }}"
             - name: WHITEBOARD_SECRET
               value: "{{ .Values.WHITEBOARD_SECRET }}"
-          image: ghcr.io/nextcloud-releases/aio-nextcloud:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-nextcloud:20250927_081431
           {{- if eq (.Values.RPSS_ENABLED | default "no") "yes" }} # AIO-config - do not change this comment!
           securityContext:
             # The items below only work in container context

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -55,7 +55,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-notify-push:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-notify-push:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -24,7 +24,7 @@ spec:
     spec:
       initContainers:
         - name: init-volumes
-          image: ghcr.io/nextcloud-releases/aio-alpine:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-alpine:20250927_081431
           command:
             - chmod
             - "777"
@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-onlyoffice:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-onlyoffice:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -39,7 +39,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-redis:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-redis:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -52,7 +52,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-talk:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-talk:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -44,7 +44,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-talk-recording:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-talk-recording:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-whiteboard-deployment.yaml

@@ -48,7 +48,7 @@ spec:
               value: redis
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: ghcr.io/nextcloud-releases/aio-whiteboard:20250822_112758
+          image: ghcr.io/nextcloud-releases/aio-whiteboard:20250927_081431
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/update-helm.sh

@@ -27,7 +27,7 @@ cp latest.yml latest.yml.backup
 
 # Additional config
 # shellcheck disable=SC1083
-sed -i -E '/^( *- )(NET_RAW|SYS_NICE|MKNOD|SYS_ADMIN|CHOWN)$/!s/( *- )([A-Z_]+)$/\1\2=${\2}/' latest.yml
+sed -i -E '/^( *- )(NET_RAW|SYS_NICE|MKNOD|SYS_ADMIN|CHOWN|SYS_CHROOT|FOWNER)$/!s/( *- )([A-Z_]+)$/\1\2=${\2}/' latest.yml
 cp sample.conf /tmp/
 sed -i 's|^|export |' /tmp/sample.conf
 # shellcheck disable=SC1091

php/composer.lock

@@ -502,16 +502,16 @@
         },
         {
             "name": "php-di/invoker",
-            "version": "2.3.6",
+            "version": "2.3.7",
             "source": {
                 "type": "git",
                 "url": "https://github.com/PHP-DI/Invoker.git",
-                "reference": "59f15608528d8a8838d69b422a919fd6b16aa576"
+                "reference": "3c1ddfdef181431fbc4be83378f6d036d59e81e1"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/PHP-DI/Invoker/zipball/59f15608528d8a8838d69b422a919fd6b16aa576",
-                "reference": "59f15608528d8a8838d69b422a919fd6b16aa576",
+                "url": "https://api.github.com/repos/PHP-DI/Invoker/zipball/3c1ddfdef181431fbc4be83378f6d036d59e81e1",
+                "reference": "3c1ddfdef181431fbc4be83378f6d036d59e81e1",
                 "shasum": ""
             },
             "require": {
@@ -521,7 +521,7 @@
             "require-dev": {
                 "athletic/athletic": "~0.1.8",
                 "mnapoli/hard-mode": "~0.3.0",
-                "phpunit/phpunit": "^9.0"
+                "phpunit/phpunit": "^9.0 || ^10 || ^11 || ^12"
             },
             "type": "library",
             "autoload": {
@@ -545,7 +545,7 @@
             ],
             "support": {
                 "issues": "https://github.com/PHP-DI/Invoker/issues",
-                "source": "https://github.com/PHP-DI/Invoker/tree/2.3.6"
+                "source": "https://github.com/PHP-DI/Invoker/tree/2.3.7"
             },
             "funding": [
                 {
@@ -553,7 +553,7 @@
                     "type": "github"
                 }
             ],
-            "time": "2025-01-17T12:49:27+00:00"
+            "time": "2025-08-30T10:22:22+00:00"
         },
         {
             "name": "php-di/php-di",
@@ -1727,16 +1727,16 @@
     "packages-dev": [
         {
             "name": "amphp/amp",
-            "version": "v3.1.0",
+            "version": "v3.1.1",
             "source": {
                 "type": "git",
                 "url": "https://github.com/amphp/amp.git",
-                "reference": "7cf7fef3d667bfe4b2560bc87e67d5387a7bcde9"
+                "reference": "fa0ab33a6f47a82929c38d03ca47ebb71086a93f"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/amphp/amp/zipball/7cf7fef3d667bfe4b2560bc87e67d5387a7bcde9",
-                "reference": "7cf7fef3d667bfe4b2560bc87e67d5387a7bcde9",
+                "url": "https://api.github.com/repos/amphp/amp/zipball/fa0ab33a6f47a82929c38d03ca47ebb71086a93f",
+                "reference": "fa0ab33a6f47a82929c38d03ca47ebb71086a93f",
                 "shasum": ""
             },
             "require": {
@@ -1796,7 +1796,7 @@
             ],
             "support": {
                 "issues": "https://github.com/amphp/amp/issues",
-                "source": "https://github.com/amphp/amp/tree/v3.1.0"
+                "source": "https://github.com/amphp/amp/tree/v3.1.1"
             },
             "funding": [
                 {
@@ -1804,7 +1804,7 @@
                     "type": "github"
                 }
             ],
-            "time": "2025-01-26T16:07:39+00:00"
+            "time": "2025-08-27T21:42:00+00:00"
         },
         {
             "name": "amphp/byte-stream",
@@ -2037,16 +2037,16 @@
         },
         {
             "name": "amphp/parallel",
-            "version": "v2.3.1",
+            "version": "v2.3.2",
             "source": {
                 "type": "git",
                 "url": "https://github.com/amphp/parallel.git",
-                "reference": "5113111de02796a782f5d90767455e7391cca190"
+                "reference": "321b45ae771d9c33a068186b24117e3cd1c48dce"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/amphp/parallel/zipball/5113111de02796a782f5d90767455e7391cca190",
-                "reference": "5113111de02796a782f5d90767455e7391cca190",
+                "url": "https://api.github.com/repos/amphp/parallel/zipball/321b45ae771d9c33a068186b24117e3cd1c48dce",
+                "reference": "321b45ae771d9c33a068186b24117e3cd1c48dce",
                 "shasum": ""
             },
             "require": {
@@ -2109,7 +2109,7 @@
             ],
             "support": {
                 "issues": "https://github.com/amphp/parallel/issues",
-                "source": "https://github.com/amphp/parallel/tree/v2.3.1"
+                "source": "https://github.com/amphp/parallel/tree/v2.3.2"
             },
             "funding": [
                 {
@@ -2117,7 +2117,7 @@
                     "type": "github"
                 }
             ],
-            "time": "2024-12-21T01:56:09+00:00"
+            "time": "2025-08-27T21:55:40+00:00"
         },
         {
             "name": "amphp/parser",
@@ -3571,16 +3571,16 @@
         },
         {
             "name": "phpstan/phpdoc-parser",
-            "version": "2.2.0",
+            "version": "2.3.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/phpstan/phpdoc-parser.git",
-                "reference": "b9e61a61e39e02dd90944e9115241c7f7e76bfd8"
+                "reference": "1e0cd5370df5dd2e556a36b9c62f62e555870495"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/phpstan/phpdoc-parser/zipball/b9e61a61e39e02dd90944e9115241c7f7e76bfd8",
-                "reference": "b9e61a61e39e02dd90944e9115241c7f7e76bfd8",
+                "url": "https://api.github.com/repos/phpstan/phpdoc-parser/zipball/1e0cd5370df5dd2e556a36b9c62f62e555870495",
+                "reference": "1e0cd5370df5dd2e556a36b9c62f62e555870495",
                 "shasum": ""
             },
             "require": {
@@ -3612,9 +3612,9 @@
             "description": "PHPDoc parser with support for nullable, intersection and generic types",
             "support": {
                 "issues": "https://github.com/phpstan/phpdoc-parser/issues",
-                "source": "https://github.com/phpstan/phpdoc-parser/tree/2.2.0"
+                "source": "https://github.com/phpstan/phpdoc-parser/tree/2.3.0"
             },
-            "time": "2025-07-13T07:04:09+00:00"
+            "time": "2025-08-30T15:50:23+00:00"
         },
         {
             "name": "revolt/event-loop",
@@ -3883,16 +3883,16 @@
         },
         {
             "name": "symfony/console",
-            "version": "v6.4.24",
+            "version": "v6.4.25",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/console.git",
-                "reference": "59266a5bf6a596e3e0844fd95e6ad7ea3c1d3350"
+                "reference": "273fd29ff30ba0a88ca5fb83f7cf1ab69306adae"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/console/zipball/59266a5bf6a596e3e0844fd95e6ad7ea3c1d3350",
-                "reference": "59266a5bf6a596e3e0844fd95e6ad7ea3c1d3350",
+                "url": "https://api.github.com/repos/symfony/console/zipball/273fd29ff30ba0a88ca5fb83f7cf1ab69306adae",
+                "reference": "273fd29ff30ba0a88ca5fb83f7cf1ab69306adae",
                 "shasum": ""
             },
             "require": {
@@ -3957,7 +3957,7 @@
                 "terminal"
             ],
             "support": {
-                "source": "https://github.com/symfony/console/tree/v6.4.24"
+                "source": "https://github.com/symfony/console/tree/v6.4.25"
             },
             "funding": [
                 {
@@ -3977,7 +3977,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2025-07-30T10:38:54+00:00"
+            "time": "2025-08-22T10:21:53+00:00"
         },
         {
             "name": "symfony/filesystem",
@@ -4449,16 +4449,16 @@
         },
         {
             "name": "symfony/string",
-            "version": "v7.3.2",
+            "version": "v7.3.3",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/string.git",
-                "reference": "42f505aff654e62ac7ac2ce21033818297ca89ca"
+                "reference": "17a426cce5fd1f0901fefa9b2a490d0038fd3c9c"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/string/zipball/42f505aff654e62ac7ac2ce21033818297ca89ca",
-                "reference": "42f505aff654e62ac7ac2ce21033818297ca89ca",
+                "url": "https://api.github.com/repos/symfony/string/zipball/17a426cce5fd1f0901fefa9b2a490d0038fd3c9c",
+                "reference": "17a426cce5fd1f0901fefa9b2a490d0038fd3c9c",
                 "shasum": ""
             },
             "require": {
@@ -4516,7 +4516,7 @@
                 "utf8"
             ],
             "support": {
-                "source": "https://github.com/symfony/string/tree/v7.3.2"
+                "source": "https://github.com/symfony/string/tree/v7.3.3"
             },
             "funding": [
                 {
@@ -4536,7 +4536,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2025-07-10T08:47:49+00:00"
+            "time": "2025-08-25T06:35:40+00:00"
         },
         {
             "name": "vimeo/psalm",

php/containers-schema.json

@@ -81,7 +81,7 @@
 							"properties": {
 								"ip_binding": {
 									"type": "string",
-									"pattern": "^(%[A-Z_]+%)?$"
+									"pattern": "^((%[A-Z_]+%)|127\\.0\\.0\\.1)?$"
 								},
 								"port_number": {
 									"type": "string",

php/containers.json

@@ -379,7 +379,7 @@
       ],
       "internal_port": "9980",
       "environment": [
-        "aliasgroup1=https://%NC_DOMAIN%:443",
+        "aliasgroup1=https://%NC_DOMAIN%:443,http://nextcloud-aio-apache:23973",
         "extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:logging.level_startup=warning --o:home_mode.enable=true %COLLABORA_SECCOMP_POLICY% --o:remote_font_config.url=https://%NC_DOMAIN%/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+",
         "dictionaries=%COLLABORA_DICTIONARIES%",
         "TZ=%TIMEZONE%",
@@ -389,7 +389,7 @@
       "restart": "unless-stopped",
       "nextcloud_exec_commands": [
         "echo 'Activating Collabora config...'",
-        "php /var/www/html/occ richdocuments:activate-config"
+        "php /var/www/html/occ richdocuments:activate-config --wopi-url='http://nextcloud-aio-apache:23973' --callback-url='http://nextcloud-aio-apache:23973'"
       ],
       "profiles": [
         "collabora"

php/public/style.css

@@ -220,7 +220,7 @@ svg:not(:has(use)) .fallback-text {
 }
 
 .login > .monospace {
-    font-family: monospace;
+    font-family: monospace, monospace, system-ui, -apple-system, 'Segoe UI', Roboto, Oxygen-Sans, Cantarell, Ubuntu, 'Helvetica Neue', 'Noto Sans', 'Liberation Sans', Arial, sans-serif, 'Apple Color Emoji', 'Segoe UI Emoji', 'Segoe UI Symbol', 'Noto Color Emoji';
     font-size: 17px;
 }
 
@@ -251,7 +251,7 @@ svg:not(:has(use)) .fallback-text {
     min-width: 100vw;
     position: fixed;
     width: 100vw;
-    background-image: url("img/jenna-kim-the-globe.webp");
+    background-image: url("img/jo-myoung-hee-fluid.webp");
     background-position: center;
     background-repeat: no-repeat;
     background-size: cover;
@@ -260,7 +260,7 @@ svg:not(:has(use)) .fallback-text {
 }
 
 html[data-theme="dark"] .wrapper {
-    background-image: url("img/jenna-kim-the-globe-dark.webp");
+    background-image: url("img/jo-myoung-hee-fluid-dark.webp");
 }
 
 form {

php/src/Container/Container.php

@@ -19,8 +19,6 @@ readonly class Container {
         private ContainerEnvironmentVariables $containerEnvironmentVariables,
         /** @var string[] */
         private array                         $dependsOn,
-        /** @var string[] */
-        private array                         $secrets,
         private string                        $uiSecret,
         /** @var string[] */
         private array                         $devices,
@@ -82,10 +80,6 @@ readonly class Container {
         return $this->maxShutdownTime;
     }
 
-    public function GetSecrets() : array {
-        return $this->secrets;
-    }
-
     public function GetUiSecret() : string {
         return $this->dockerActionManager->GetAndGenerateSecretWrapper($this->uiSecret);
     }

php/src/ContainerDefinitionFetcher.php

@@ -239,9 +239,12 @@ readonly class ContainerDefinitionFetcher {
                 $internalPort = $entry['internal_port'];
             }
 
-            $secrets = [];
             if (isset($entry['secrets'])) {
-                $secrets = $entry['secrets'];
+                // All secrets are registered with the configuration when they 
+                // are discovered so they can be later generated at time-of-use.
+                foreach ($entry['secrets'] as $secret) {
+                    $this->configurationManager->RegisterSecret($secret);
+                }
             }
 
             $uiSecret = '';
@@ -320,7 +323,6 @@ readonly class ContainerDefinitionFetcher {
                 $volumes,
                 $variables,
                 $dependsOn,
-                $secrets,
                 $uiSecret,
                 $devices,
                 $enableNvidiaGpu,

php/src/Controller/DockerController.php

@@ -177,7 +177,7 @@ readonly class DockerController {
         }
 
         if (isset($request->getParsedBody()['install_latest_major'])) {
-            $installLatestMajor = 31;
+            $installLatestMajor = 32;
         } else {
             $installLatestMajor = "";
         }

php/src/Data/ConfigurationManager.php

@@ -7,6 +7,8 @@ use AIO\Controller\DockerController;
 
 class ConfigurationManager
 {
+    private array $secrets = [];
+
     public function GetConfig() : array
     {
         if(file_exists(DataConst::GetConfigFile()))
@@ -50,13 +52,15 @@ class ConfigurationManager
         return $config['secrets'][$secretId];
     }
 
-    public function GetSecret(string $secretId) : string {
-        $config = $this->GetConfig();
-        if(!isset($config['secrets'][$secretId])) {
-            $config['secrets'][$secretId] = "";
+    public function GetRegisteredSecret(string $secretId) : string {
+        if ($this->secrets[$secretId]) {
+            return $this->GetAndGenerateSecret($secretId);
         }
+        throw new \Exception("The secret " . $secretId . " was not registered. Please check if it is defined in secrets of containers.json.");
+    }
 
-        return $config['secrets'][$secretId];
+    public function RegisterSecret(string $secretId) : void {
+        $this->secrets[$secretId] = true;
     }
 
     private function DoubleSafeBackupSecret(string $borgBackupPassword) : void {

php/src/Docker/DockerActionManager.php

@@ -221,10 +221,6 @@ readonly class DockerActionManager {
             $requestBody['HostConfig']['Binds'] = $volumes;
         }
 
-        foreach ($container->GetSecrets() as $secret) {
-            $this->configurationManager->GetAndGenerateSecret($secret);
-        }
-
         $aioVariables = $container->GetAioVariables()->GetVariables();
         foreach ($aioVariables as $variable) {
             $config = $this->configurationManager->GetConfig();
@@ -566,18 +562,10 @@ readonly class DockerActionManager {
             // Allow to get local ip-address of caddy container and add it to trusted proxies automatically
             'CADDY_IP_ADDRESS' => in_array('caddy', $this->configurationManager->GetEnabledCommunityContainers(), true) ? gethostbyname('nextcloud-aio-caddy') : '',
             'WHITEBOARD_ENABLED' => $this->configurationManager->isWhiteboardEnabled() ? 'yes' : '',
-            default => $this->getSecretOrThrow($placeholder),
+            default => $this->configurationManager->GetRegisteredSecret($placeholder),
         };
     }
 
-    private function getSecretOrThrow(string $secretName): string {
-        $secret = $this->configurationManager->GetSecret($secretName);
-        if ($secret === "") {
-            throw new \Exception("The secret " . $secretName . " is empty. Cannot substitute its value. Please check if it is defined in secrets of containers.json.");
-        }
-        return $secret;
-    }
-
     private function isContainerUpdateAvailable(string $id): string {
         $container = $this->containerDefinitionFetcher->GetContainerById($id);
 

php/templates/containers.twig

@@ -17,7 +17,7 @@
 
     <div class="container">
         <main>
-            <h1>Nextcloud AIO v11.7.0</h1>
+            <h1>Nextcloud AIO v11.9.0</h1>
 
             {# Add 2nd tab warning #}
             <script type="text/javascript" src="second-tab-warning.js"></script>
@@ -36,7 +36,7 @@
             {% set isBackupOrRestoreRunning = false %}
             {% set isApacheStarting = false %}
             {# Setting newMajorVersion to '' will hide corresponding options/elements, can be set to an integer like 26 in order to show corresponding elements. If set, also increase installLatestMajor in https://github.com/nextcloud/all-in-one/blob/main/php/src/Controller/DockerController.php #}
-            {% set newMajorVersion = '' %}
+            {% set newMajorVersionString = '25 Autumn' %}
 
             {% if is_backup_container_running == true %}
                 {% if borg_backup_mode == 'backup' or borg_backup_mode == 'restore' %}
@@ -118,7 +118,7 @@
                                 <p>Make sure that this server is reachable on port 443 (port 443/tcp is open/forwarded in your firewall/router and 443/udp as well if you want to enable http3) and that you've correctly set up the DNS config for the domain that you enter (set the A record to your public ipv4-address and if you need ipv6, set the AAAA record to your public ipv6-address. A CNAME record is, of course, also possible). You should see hints on what went wrong in the top right corner if your domain is not accepted.</p>
                                 <details>
                                     <summary>Click here for further hints</summary>
-                                    <p>If you do not have a domain yet, you can get one for free e.g. from duckdns.org and others. Recommended is to use <a target="_blank" href="https://github.com/nextcloud/all-in-one/discussions/5439">Tailscale</a></p>
+                                    <p>If you do not have a domain yet, you can get one for free e.g. from duckdns.org and others. Recommended is to use <a target="_blank" href="https://github.com/nextcloud/all-in-one/discussions/6817">Tailscale</a></p>
                                     <p>If you have a dynamic public IP-address, you can use e.g. <a target="_blank" href="https://ddclient.net/">DDclient</a> with a compatible domain provider for DNS updates.</p>
                                     <p>If you only want to install AIO locally without exposing it to the public internet or if you cannot do so, feel free to follow <a target="_blank" href="https://github.com/nextcloud/all-in-one/blob/main/local-instance.md">this documentation</a>.</p>
                                     <p>If you should be using Cloudflare Proxy for your domain, make sure to disable the Proxy feature temporarily as it might block the domain validation attempts.</p>
@@ -290,10 +290,10 @@
                         {% else %}
                             {% if is_mastercontainer_update_available == false %}
                                 <p>Your containers are up-to-date.</p>
-                                {% if newMajorVersion != '' and isAnyRunning == true and isApacheStarting != true %}
+                                {% if newMajorVersionString != '' and isAnyRunning == true and isApacheStarting != true %}
                                     <details>
-                                    <summary>Note about <strong>Nextcloud Hub {{ newMajorVersion - 21 }}</strong></summary>
-                                        <p>If you haven't upgraded to Nextcloud Hub {{ newMajorVersion - 21 }} yet and want to do that now, feel free to follow <strong><a target="_blank" href="https://github.com/nextcloud/all-in-one/discussions/6053">this documentation</a></strong></p>
+                                    <summary>Note about <strong>Nextcloud Hub {{ newMajorVersionString }}</strong></summary>
+                                        <p>If you haven't upgraded to Nextcloud Hub {{ newMajorVersionString }} yet and want to do that now, feel free to follow <strong><a target="_blank" href="https://github.com/nextcloud/all-in-one/discussions/6865">this documentation</a></strong></p>
                                     </details>
                                 {% endif %}
                             {% endif %}
@@ -337,8 +337,8 @@
                                     <form method="POST" action="/api/docker/start" class="xhr">
                                         <input type="hidden" name="{{csrf.keys.name}}" value="{{csrf.name}}">
                                         <input type="hidden" name="{{csrf.keys.value}}" value="{{csrf.value}}">
-                                        {% if newMajorVersion != '' %}
-                                            <input type="checkbox" id="install_latest_major" name="install_latest_major"><label for="install_latest_major">Install Nextcloud Hub {{ newMajorVersion - 21 }} (if unchecked, Nextcloud Hub {{ newMajorVersion - 22 }} will get installed)</label><br>
+                                        {% if newMajorVersionString != '' %}
+                                            <input type="checkbox" id="install_latest_major" name="install_latest_major"><label for="install_latest_major">Install Nextcloud Hub {{ newMajorVersionString }} (if unchecked, Nextcloud Hub 10 will get installed)</label><br>
                                         {% endif %}
                                         <input type="submit" value="Download and start containers" />
                                     </form>

php/templates/layout.twig

@@ -1,7 +1,7 @@
 <html>
     <head>
         <title>AIO</title>
-        <link rel="stylesheet" href="/style.css?v5" media="all" />
+        <link rel="stylesheet" href="/style.css?v6" media="all" />
         <link rel="icon" href="/img/favicon.png">
         <script type="text/javascript" src="forms.js"></script>
         <script type="text/javascript" src="toggle-dark-mode.js"></script>

readme.md

@@ -32,7 +32,7 @@ Included are:
 - A+ security in Nextcloud security scan
 - Ready to be used behind existing [Reverse proxies](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md)
 - Can be used behind [Cloudflare Tunnel](https://github.com/nextcloud/all-in-one#how-to-run-nextcloud-behind-a-cloudflare-tunnel)
-- Can be used via [Tailscale](https://github.com/nextcloud/all-in-one/discussions/5439)
+- Can be used via [Tailscale](https://github.com/nextcloud/all-in-one/discussions/6817)
 - Ready for big file uploads up to 10 GB on public links, [adjustable](https://github.com/nextcloud/all-in-one#how-to-adjust-the-upload-limit-for-nextcloud) (logged in users can upload much bigger files using the webinterface or the mobile/desktop clients since chunking is used in that case)
 - PHP and web server timeouts set to 3600s, [adjustable](https://github.com/nextcloud/all-in-one#how-to-adjust-the-max-execution-time-for-nextcloud) (important for big file uploads)
 - Defaults to a max of 512 MB RAM per PHP process, [adjustable](https://github.com/nextcloud/all-in-one#how-to-adjust-the-php-memory-limit-for-nextcloud)
@@ -282,7 +282,7 @@ Only those (if you access the Mastercontainer Interface internally via port 8080
 - `3478/TCP` and `3478/UDP`: will be used by the Turnserver inside the Talk container and needs to be open/forwarded in your firewall/router
 
 ### Notes on Cloudflare (proxy/tunnel)
-Since Cloudflare Proxy/Tunnel comes with a lot of limitations which are listed below, it is rather recommended to switch to [Tailscale](https://github.com/nextcloud/all-in-one/discussions/5439) if possible.
+Since Cloudflare Proxy/Tunnel comes with a lot of limitations which are listed below, it is rather recommended to switch to [Tailscale](https://github.com/nextcloud/all-in-one/discussions/6817) if possible.
 - Cloudflare Proxy and Cloudflare Tunnel both require Cloudflare to perform TLS termination on their side and thus decrypt all the traffic on their infrastructure. This is a privacy concern and you will need to look for other solutions if it's unacceptable for you.
 - Using Cloudflare Tunnel might potentially slow down Nextcloud since local access via the configured domain is not possible because TLS termination is in that case offloaded to Cloudflare's infrastructure. There is no way to disable this behavior in Cloudflare Tunnel.
 - It is known that the domain validation may not work correctly behind Cloudflare since Cloudflare might block the validation attempt. You can simply skip it in that case by following: https://github.com/nextcloud/all-in-one#how-to-skip-the-domain-validation
@@ -300,7 +300,7 @@ Since Cloudflare Proxy/Tunnel comes with a lot of limitations which are listed b
 Although it does not seems like it is the case but from AIO perspective a Cloudflare Tunnel works like a reverse proxy. So please follow the [reverse proxy documentation](./reverse-proxy.md) where is documented how to make it run behind a Cloudflare Tunnel. However please see the [caveats](https://github.com/nextcloud/all-in-one#notes-on-cloudflare-proxytunnel) before proceeding.
 
 ### How to run Nextcloud via Tailscale?
-For a reverse proxy example guide for Tailscale, see this guide by @flll: https://github.com/nextcloud/all-in-one/discussions/5439
+For a reverse proxy example guide for Tailscale, see this guide by [@Perseus333](https://github.com/Perseus333): https://github.com/nextcloud/all-in-one/discussions/6817
 
 ### How to get Nextcloud running using the ACME DNS-challenge?
 You can install AIO in reverse proxy mode where is also documented how to get it running using the ACME DNS-challenge for getting a valid certificate for AIO. See the [reverse proxy documentation](./reverse-proxy.md). (Meant is the `Caddy with ACME DNS-challenge` section). Also see https://github.com/dani-garcia/vaultwarden/wiki/Running-a-private-vaultwarden-instance-with-Let%27s-Encrypt-certs#getting-a-custom-caddy-build for additional docs on this topic.
@@ -309,22 +309,22 @@ You can install AIO in reverse proxy mode where is also documented how to get it
 If you do not want to open Nextcloud to the public internet, you may have a look at the following documentation on how to set it up locally: [local-instance.md](./local-instance.md), but keep in mind you're still required to have https working properly.
 
 ### Can I use an ip-address for Nextcloud instead of a domain?
-No and it will not be added. If you only want to run it locally, you may have a look at the following documentation: [local-instance.md](./local-instance.md). Recommended is to use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/5439).
+No and it will not be added. If you only want to run it locally, you may have a look at the following documentation: [local-instance.md](./local-instance.md). Recommended is to use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/6817).
 
 ### Can I run AIO offline or in an airgapped system?
 No. This is not possible and will not be added due to multiple reasons: update checks, app installs via app-store, downloading additional docker images on demand and more.
 
 ### Are self-signed certificates supported for Nextcloud?
-No and they will not be. If you want to run it locally, without opening Nextcloud to the public internet, please have a look at the [local instance documentation](./local-instance.md). Recommended is to use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/5439).
+No and they will not be. If you want to run it locally, without opening Nextcloud to the public internet, please have a look at the [local instance documentation](./local-instance.md). Recommended is to use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/6817).
 
 ### Can I use AIO with multiple domains?
 No and it will not be added. However you can use [this feature](https://github.com/nextcloud/all-in-one/blob/main/multiple-instances.md) in order to create multiple AIO instances, one for each domain.
 
 ### Are other ports than the default 443 for Nextcloud supported?
-No and they will not be. If port 443 and/or 80 is blocked for you, you may use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/5439) if you want to publish it online. If you already run a different service on port 443, please use a dedicated domain for Nextcloud and set it up correctly by following the [reverse proxy documentation](./reverse-proxy.md). However in all cases the Nextcloud interface will redirect you to port 443.
+No and they will not be. If port 443 and/or 80 is blocked for you, you may use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/6817) if you want to publish it online. If you already run a different service on port 443, please use a dedicated domain for Nextcloud and set it up correctly by following the [reverse proxy documentation](./reverse-proxy.md). However in all cases the Nextcloud interface will redirect you to port 443.
 
 ### Can I run Nextcloud in a subdirectory on my domain?
-No and it will not be added. Please use a dedicated (sub-)domain for Nextcloud and set it up correctly by following the [reverse proxy documentation](./reverse-proxy.md). Alternatively, you may use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/5439) if you want to publish it online.
+No and it will not be added. Please use a dedicated (sub-)domain for Nextcloud and set it up correctly by following the [reverse proxy documentation](./reverse-proxy.md). Alternatively, you may use [Tailscale](https://github.com/nextcloud/all-in-one/discussions/6817) if you want to publish it online.
 
 ### How can I access Nextcloud locally?
 Please note that local access is not possible if you are running AIO behind Cloudflare Tunnel since TLS proxying is in that case offloaded to Cloudflares infrastructure. You can fix this by setting up your own reverse proxy that handles TLS proxying locally and will make the steps below work.

reverse-proxy.md

@@ -4,7 +4,7 @@
 > Please note that AIO comes secured with TLS out-of-the-box. So you don't need to necessarily set up your own reverse proxy if you only want to run Nextcloud AIO which is much easier. See [the normal readme](https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-use-this) in that case. However if port 443 should already be used because you already run a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else), you need to follow this reverse proxy documentation to set up Nextcloud AIO.
 
 > [!TIP]
-> If you don't have a domain yet, [Tailscale is recommended](https://github.com/nextcloud/all-in-one/discussions/5439). If you don't have a reverse proxy yet, [Caddy is recommended](https://github.com/nextcloud/all-in-one/discussions/575).
+> If you don't have a domain yet, [Tailscale is recommended](https://github.com/nextcloud/all-in-one/discussions/6817). If you don't have a reverse proxy yet, [Caddy is recommended](https://github.com/nextcloud/all-in-one/discussions/575).
 
 ## Introduction
 In order to run Nextcloud behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else), you need to:
@@ -679,6 +679,9 @@ The examples below define the dynamic configuration in YAML files. If you rather
     entryPoints:
       https:
         address: ":443" # Create an entrypoint called "https" that uses port 443
+        transport:
+          respondingTimeouts:
+            readTimeout: 24h # Allows uploads > 100MB; prevents connection reset due to chunking (public upload-only links)
         # If you want to enable HTTP/3 support, uncomment the line below
         # http3: {}
     
@@ -766,6 +769,9 @@ The examples below define the dynamic configuration in YAML files. If you rather
     entryPoints:
       https:
         address: ":443" # Create an entrypoint called "https" that uses port 443
+        transport:
+          respondingTimeouts:
+            readTimeout: 24h # Allows uploads > 100MB; prevents connection reset due to chunking (public upload-only links)
         # If you want to enable HTTP/3 support, uncomment the line below
         # http3: {}
     
@@ -905,7 +911,7 @@ Add the following `web.config` file to the root of the site you created as the r
 
 <summary>click here to expand</summary>
 
-For a reverse proxy example guide for Tailscale, see this guide by @flll: https://github.com/nextcloud/all-in-one/discussions/5439
+For a reverse proxy example guide for Tailscale, see this guide by [@Perseus333](https://github.com/Perseus333): https://github.com/nextcloud/all-in-one/discussions/6817
 
 </details>
 
@@ -1048,3 +1054,22 @@ If something does not work, follow the steps below:
 1. [Enable Hairpin NAT in your router](https://github.com/nextcloud/all-in-one/discussions/5849) or [set up a local DNS server and add a custom dns-record](https://github.com/nextcloud/all-in-one#how-can-i-access-nextcloud-locally) that allows the server to reach itself locally
 1. Try to configure everything from scratch - if it still does not work by following https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance.
 1. As last resort, you may disable the domain validation by adding `--env SKIP_DOMAIN_VALIDATION=true` to the docker run command. But only use this if you are completely sure that you've correctly configured everything!
+
+## 8. Removing the reverse proxy
+If you, at some point, want to remove the reverse proxy, here are some general steps:
+1. Stop all running containers in the AIO Interface.
+2. Stop and remove the mastercontainer.
+    ```
+    sudo docker stop nextcloud-aio-mastercontainer
+    sudo docker rm nextcloud-aio-mastercontainer  
+    ```
+3. Remove the software and configuration file that you used for the reverse proxy (see section 1).
+4. Restart the mastercontainer with the [docker run command from the main readme](https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-use-this) but add the two options:
+   ```
+   --env APACHE_IP_BINDING=0.0.0.0 \
+   --env APACHE_PORT=443 \   
+    ```
+    Do this *before* the last line of the run command!  
+
+    *The first command ensures that the Apache container is listening on all available network interfaces and the second command configures it to listen to port 443.*
+5. Restart all other containers in the AIO interface.