Merge pull request #5935 from nextcloud/aio-helm-update

Helm Chart updates

.github/dependabot.yml

@@ -7,6 +7,9 @@ updates:
     time: "12:00"
   open-pull-requests-limit: 10
   rebase-strategy: "disabled"
+  labels:
+  - 3. to review
+  - dependencies
 - package-ecosystem: composer
   directory: "/php/"
   schedule:

.github/workflows/helm-release.yml

@@ -41,7 +41,7 @@ jobs:
           helm lint ./nextcloud-aio-helm-chart
 
       - name: Run chart-releaser
-        uses: helm/chart-releaser-action@v1.6.0
+        uses: helm/chart-releaser-action@v1.7.0
         with:
           mark_as_latest: false
           charts_dir: .

Containers/apache/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM caddy:2.8.4-alpine AS caddy
+FROM caddy:2.9.1-alpine AS caddy
 
 # From https://github.com/docker-library/httpd/blob/master/2.4/alpine/Dockerfile
 FROM httpd:2.4.62-alpine3.21

Containers/apache/healthcheck.sh

@@ -3,7 +3,3 @@
 nc -z "$NEXTCLOUD_HOST" 9000 || exit 0
 nc -z 127.0.0.1 8000 || exit 1
 nc -z 127.0.0.1 "$APACHE_PORT" || exit 1
-if ! nc -z "$NC_DOMAIN" 443; then
-    echo "Could not reach $NC_DOMAIN on port 443."
-    exit 1
-fi

Containers/borgbackup/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.0
+FROM alpine:3.21.2
 
 RUN set -ex; \
     \

Containers/borgbackup/backupscript.sh

@@ -521,7 +521,7 @@ if [ "$BORG_MODE" = check ]; then
     # Perform the check
     if ! borg check -v --verify-data; then
         echo "Some errors were found while checking the backup integrity!"
-        echo "Check the AIO interface for advices on how to proceed now!"
+        echo "Check the AIO interface for advice on how to proceed now!"
         exit 1
     fi
 

Containers/clamav/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/Cisco-Talos/clamav-docker/blob/main/clamav/1.3/alpine/Dockerfile
-FROM clamav/clamav:1.4.1-17
+FROM clamav/clamav:1.4.1-22
 
 COPY clamav.conf /clamav.conf
 COPY --chmod=775 start.script /start.script

Containers/collabora/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/tree/master/docker
-FROM collabora/code:24.04.10.2.1
+FROM collabora/code:24.04.11.3.1
 
 USER root
 ARG DEBIAN_FRONTEND=noninteractive

Containers/docker-socket-proxy/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM haproxy:3.1.1-alpine
+FROM haproxy:3.1.2-alpine
 
 # hadolint ignore=DL3002
 USER root

Containers/domaincheck/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.0
+FROM alpine:3.21.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache bash lighttpd netcat-openbsd; \

Containers/fulltextsearch/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from here https://github.com/elastic/elasticsearch/blob/main/distribution/docker/src/docker/Dockerfile
-FROM elasticsearch:8.17.0
+FROM elasticsearch:8.17.1
 
 USER root
 

Containers/imaginary/Dockerfile

@@ -1,7 +1,7 @@
 # syntax=docker/dockerfile:latest
-FROM golang:1.23.4-alpine3.21 AS go
+FROM golang:1.23.5-alpine3.21 AS go
 
-ENV IMAGINARY_HASH=8f36a26c448be8c151a3878404b75fcd1cd3cf0c
+ENV IMAGINARY_HASH=1d4e251cfcd58ea66f8361f8721d7b8cc85002a3
 
 RUN set -ex; \
     apk add --no-cache \
@@ -13,7 +13,7 @@ RUN set -ex; \
         build-base; \
     go install github.com/h2non/imaginary@"$IMAGINARY_HASH";
 
-FROM alpine:3.21.0
+FROM alpine:3.21.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache \

Containers/mastercontainer/Dockerfile

@@ -1,12 +1,12 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:27.4.1-cli AS docker
+FROM docker:27.5.0-cli AS docker
 
 # Caddy is a requirement
-FROM caddy:2.8.4-alpine AS caddy
+FROM caddy:2.9.1-alpine AS caddy
 
 # From https://github.com/docker-library/php/blob/master/8.3/alpine3.21/fpm/Dockerfile
-FROM php:8.3.14-fpm-alpine3.21
+FROM php:8.3.16-fpm-alpine3.21
 
 EXPOSE 80
 EXPOSE 8080

Containers/mastercontainer/start.sh

@@ -283,6 +283,15 @@ if [ "$?" = 6 ]; then
     exit 1
 fi
 
+# Check if auth.docker.io is reachable
+# Solves issues like https://github.com/nextcloud/all-in-one/discussions/5268
+if ! curl https://auth.docker.io/token | grep -q token; then
+    print_red "Could not reach https://auth.docker.io."
+    echo "Most likely is something blocking access to it."
+    echo "You should be able to fix this by using https://github.com/nextcloud/all-in-one/tree/main/manual-install"
+    exit 1
+fi
+
 # Check that no changes have been made to timezone settings since AIO only supports running in Etc/UTC timezone
 if [ -n "$TZ" ]; then
     print_red "The environmental variable TZ has been set which is not supported by AIO since it only supports running in the default Etc/UTC timezone!"

Containers/nextcloud/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM php:8.3.14-fpm-alpine3.21
+FROM php:8.3.16-fpm-alpine3.21
 
 ENV PHP_MEMORY_LIMIT=512M
 ENV PHP_UPLOAD_LIMIT=16G
@@ -8,7 +8,7 @@ ENV SOURCE_LOCATION=/usr/src/nextcloud
 ENV REDIS_DB_INDEX=0
 
 # AIO settings start # Do not remove or change this line!
-ENV NEXTCLOUD_VERSION=30.0.4
+ENV NEXTCLOUD_VERSION=30.0.5
 ENV AIO_TOKEN=123456
 ENV AIO_URL=localhost
 # AIO settings end # Do not remove or change this line!
@@ -125,6 +125,7 @@ RUN set -ex; \
 # set recommended PHP.ini settings
 # see https://docs.nextcloud.com/server/stable/admin_manual/configuration_server/server_tuning.html#enable-php-opcache
     { \
+        echo 'opcache.max_accelerated_files=10000'; \
         echo 'opcache.memory_consumption=256'; \
         echo 'opcache.interned_strings_buffer=64'; \
         echo 'opcache.save_comments=1'; \
@@ -146,7 +147,7 @@ RUN set -ex; \
     \
     { \
         echo 'session.save_handler = redis'; \
-        echo 'session.save_path = "tcp://${REDIS_HOST}:6379/${REDIS_DB_INDEX}?auth=${REDIS_HOST_PASSWORD}"'; \
+        echo 'session.save_path = "tcp://${REDIS_HOST}:6379?database=${REDIS_DB_INDEX}${REDIS_USER_AUTH}&auth[]=${REDIS_HOST_PASSWORD}"'; \
         echo 'redis.session.locking_enabled = 1'; \
         echo 'redis.session.lock_retries = -1'; \
         echo 'redis.session.lock_wait_time = 10000'; \

Containers/nextcloud/config/redis.config.php

@@ -18,4 +18,8 @@ if (getenv('REDIS_HOST')) {
   if (getenv('REDIS_DB_INDEX')) {
     $CONFIG['redis']['dbindex'] = (int) getenv('REDIS_DB_INDEX');
   }
+
+  if (getenv('REDIS_USER_AUTH') !== false) {
+    $CONFIG['redis']['user'] = str_replace("&auth[]=", "", getenv('REDIS_USER_AUTH'));
+  }
 }

Containers/nextcloud/entrypoint.sh

@@ -158,7 +158,13 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
 # Check connection to appstore start # Do not remove or change this line!
             while true; do
                 echo -e "Checking connection to appstore"
-                CURL_STATUS="$(curl -LI "https://apps.nextcloud.com/" -o /dev/null -w '%{http_code}\n' -s)"
+                APPSTORE_URL="https://apps.nextcloud.com/"
+                if grep -q appstoreurl /var/www/html/config/config.php; then
+                    set -x
+                    APPSTORE_URL="$(grep appstoreurl /var/www/html/config/config.php | grep -oP 'https://.*v[0-9]+')"
+                    set +x
+                fi
+                CURL_STATUS="$(curl -LI "$APPSTORE_URL" -o /dev/null -w '%{http_code}\n' -s)"
                 if [[ "$CURL_STATUS" = "200" ]]
                 then
                     echo "Appstore is reachable"
@@ -858,17 +864,20 @@ else
 fi
 
 # Docker socket proxy
+# app_api is a shipped app
+if [ -d "/var/www/html/custom_apps/app_api" ]; then
+    php /var/www/html/occ app:disable app_api
+    rm -r "/var/www/html/custom_apps/app_api"
+fi
 if [ "$DOCKER_SOCKET_PROXY_ENABLED" = 'yes' ]; then
-    if ! [ -d "/var/www/html/custom_apps/app_api" ]; then
-        php /var/www/html/occ app:install app_api
-    elif [ "$(php /var/www/html/occ config:app:get app_api enabled)" != "yes" ]; then
+    if [ "$(php /var/www/html/occ config:app:get app_api enabled)" != "yes" ]; then
         php /var/www/html/occ app:enable app_api
-    elif [ "$SKIP_UPDATE" != 1 ]; then
-        php /var/www/html/occ app:update app_api
     fi
 else
-    if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/app_api" ]; then
-        php /var/www/html/occ app:remove app_api
+    if [ "$REMOVE_DISABLED_APPS" = yes ]; then
+        if [ "$(php /var/www/html/occ config:app:get app_api enabled)" != "no" ]; then
+            php /var/www/html/occ app:disable app_api
+        fi
     fi
 fi
 

Containers/notify-push/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.0
+FROM alpine:3.21.2
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh

Containers/notify-push/start.sh

@@ -62,7 +62,7 @@ fi
 
 # Set sensitive values as env
 export DATABASE_URL="$DATABASE_TYPE://oc_$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB"
-export REDIS_URL="redis://:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
+export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
 
 # Run it
 /nextcloud/custom_apps/notify_push/bin/"$CPU_ARCH"/notify_push \

Containers/redis/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From https://github.com/docker-library/redis/blob/master/7.2/alpine/Dockerfile
-FROM redis:7.2.6-alpine
+FROM redis:7.2.7-alpine
 
 COPY --chmod=775 start.sh /start.sh
 

Containers/talk/Dockerfile

@@ -2,7 +2,7 @@
 FROM nats:2.10.24-scratch AS nats
 FROM eturnal/eturnal:1.12.1 AS eturnal
 FROM strukturag/nextcloud-spreed-signaling:2.0.1 AS signaling
-FROM alpine:3.21.0 AS janus
+FROM alpine:3.21.2 AS janus
 
 ARG JANUS_VERSION=v1.3.0
 WORKDIR /src
@@ -34,7 +34,7 @@ RUN set -ex; \
     make configs; \
     rename -v ".jcfg.sample" ".jcfg" /usr/local/etc/janus/*.jcfg.sample
 
-FROM alpine:3.21.0
+FROM alpine:3.21.2
 ENV ETURNAL_ETC_DIR="/conf"
 COPY --from=janus     --chmod=777 --chown=1000:1000 /usr/local                          /usr/local
 COPY --from=eturnal   --chmod=777 --chown=1000:1000 /opt/eturnal                        /opt/eturnal

Containers/watchtower/Dockerfile

@@ -2,7 +2,7 @@
 # From https://github.com/containrrr/watchtower/blob/main/dockerfiles/Dockerfile.self-contained
 FROM containrrr/watchtower:1.7.1 AS watchtower
 
-FROM alpine:3.21.0
+FROM alpine:3.21.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \

Containers/whiteboard/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/nextcloud/whiteboard/blob/main/Dockerfile
-FROM ghcr.io/nextcloud-releases/whiteboard:v1.0.4
+FROM ghcr.io/nextcloud-releases/whiteboard:v1.0.5
 
 USER root
 RUN set -ex; \

Containers/whiteboard/start.sh

@@ -11,7 +11,7 @@ if [ -z "$REDIS_DB_INDEX" ]; then
     REDIS_DB_INDEX=0
 fi
 
-export REDIS_URL="redis://:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
+export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
 
 # Run it
 exec npm run server:start

community-containers/caddy/readme.md

@@ -9,6 +9,7 @@ This container bundles caddy and auto-configures it for you. It also covers http
 - If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin, make sure that you point `media.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyfin.
 - If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap, make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
 - If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb, make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
+- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr, make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
 - After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
 - You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup.
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack

community-containers/calcardbackup/calcardbackup.json

@@ -0,0 +1,37 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-calcardbackup",
+            "display_name": "Calendar and contacts backup",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/calcardbackup",
+            "image": "waja/calcardbackup",
+            "image_tag": "latest",
+            "restart": "unless-stopped",
+            "environment": [
+                "CRON_TIME=0 0 * * *",
+                "INIT_BACKUP=yes",
+                "BACKUP_DIR=/backup",
+                "NC_DIR=/nextcloud",
+                "NC_HOST=%NC_DOMAIN%",
+                "DB_HOST=nextcloud-aio-database",
+                "DB_PORT=5432",
+                "CALCARD_OPTS=-ltm 5"
+            ],
+            "volumes": [
+                {
+                    "source": "nextcloud_aio_calcardbackup",
+                    "destination": "/backup",
+                    "writeable": true
+                },
+                {
+                    "source": "nextcloud_aio_nextcloud",
+                    "destination": "/nextcloud",
+                    "writeable": false
+                }
+            ],
+            "backup_volumes": [
+                "nextcloud_aio_calcardbackup"
+            ]
+        }
+    ]
+}

community-containers/calcardbackup/readme.md

@@ -0,0 +1,15 @@
+## calcardbackup  
+This container packages calcardbackup which is a tool that exports calendars and addressbooks from Nextcloud to .ics and .vcf files and saves them to a compressed file.
+  
+### Notes  
+- Backups will be created at 00:00 CEST every day. Make sure that this does not conflict with the configured daily backups inside AIO.
+- All the exports will be included in AIOs backup solution
+- You can find the exports in the nextcloud_aio_calcardbackup volume
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack  
+  
+### Repository  
+https://github.com/waja/docker-calcardbackup
+
+### Maintainer
+https://github.com/pailloM
+  

community-containers/facerecognition/facerecognition.json

@@ -16,10 +16,7 @@
             "aio_variables": [
                 "nextcloud_memory_limit=2048M"
             ],
-            "devices": [
-                "/dev/dri"
-            ],
-            "enable_nvidia_gpu": true,
+            "enable_nvidia_gpu": false,
             "nextcloud_exec_commands": [
                 "php /var/www/html/occ app:install facerecognition",
                 "php /var/www/html/occ app:enable facerecognition", 

community-containers/facerecognition/readme.md

@@ -3,6 +3,7 @@ This container bundles the external model of facerecognition and auto-configures
 
 ### Notes
 - This container needs imaginary in order to analyze modern file format images. Make sure to enable imaginary in the AIO interface before adding this container.
+- The image analysis is currently set to fixed value of `1G`. See [this](https://github.com/search?q=repo%3Anextcloud%2Fall-in-one+1G+path%3A%2F%5Ecommunity-containers%5C%2Ffacerecognition%5C%2F%2F&type=code)
 - Facerecognition is by default disabled for all users, if you want to enable facerecognition for all users, you can run the following before adding this container:
     ```bash
     # Go into the container

community-containers/fail2ban/fail2ban.json

@@ -25,6 +25,16 @@
                     "source": "nextcloud_aio_vaultwarden_logs",
                     "destination": "/vaultwarden",
                     "writeable": false
+                },
+                {
+                    "source": "nextcloud_aio_jellyfin",
+                    "destination": "/jellyfin",
+                    "writeable": false
+                },
+                {
+                    "source": "nextcloud_aio_jellyseerr",
+                    "destination": "/jellyseerr",
+                    "writeable": false
                 }
             ]
         }

community-containers/fail2ban/readme.md

@@ -1,5 +1,5 @@
 ## Fail2ban
-This container bundles fail2ban and auto-configures it for you in order to block ip-addresses automatically. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden, if installed.
+This container bundles fail2ban and auto-configures it for you in order to block ip-addresses automatically. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden, https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin, and https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr, if installed.
 
 ### Notes
 - If you get an error like `"ip6tables v1.8.9 (legacy): can't initialize ip6tables table filter': Table does not exist (do you need to insmod?)"`, you need to enable ip6tables on your host via `sudo modprobe ip6table_filter`.

community-containers/jellyfin/readme.md

@@ -8,6 +8,7 @@ This container bundles Jellyfin and auto-configures it for you.
 - In order to access your Jellyfin outside the local network, you have to set up your own reverse proxy. You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) and [Jellyfin's networking documentation](https://jellyfin.org/docs/general/networking/#running-jellyfin-behind-a-reverse-proxy), OR use the [Caddy](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy) community container that will automatically configure `media.$NC_DOMAIN` to redirect to your Jellyfin.
 - ⚠️ After the initial start, Jellyfin shows a configuration page to set up the root password, etc. **Be careful to initialize your Jellyfin before adding the DNS record.**
 - If you have a firewall like ufw configured, you might need to open all Jellyfin ports in there first in order to make it work. Especially port 8096 is important!
+- If you want to secure the installation with fail2ban, you might want to check out https://github.com/nextcloud/all-in-one/tree/main/community-containers/fail2ban
 - The data of Jellyfin will be automatically included in AIO's backup solution!
 - See [here](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) how to add it to the AIO stack.
 

community-containers/jellyseerr/jellyseerr.json

@@ -0,0 +1,34 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-jellyseerr",
+            "display_name": "Jellyseerr",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr",
+            "image": "fallenbagel/jellyseerr",
+            "image_tag": "latest",
+            "internal_port": "5055",
+            "restart": "unless-stopped",
+            "ports": [
+                {
+                    "ip_binding": "%APACHE_IP_BINDING%",
+                    "port_number": "5055",
+                    "protocol": "tcp"
+                }
+            ],
+            "environment": [
+                "PORT=5055",
+                "TZ=%TIMEZONE%"
+            ],
+            "volumes": [
+                {
+                    "source": "nextcloud_aio_jellyseerr",
+                    "destination": "/app/config",
+                    "writeable": true
+                }
+            ],
+            "backup_volumes": [
+                "nextcloud_aio_jellyseerr"
+            ]
+        }
+    ]
+}

community-containers/jellyseerr/readme.md

@@ -0,0 +1,16 @@
+## Jellyseerr
+This container bundles Jellyseerr and auto-configures it for you.
+
+### Notes
+- This container is only intended to be used inside home networks as it uses http for its management page by default.
+- After adding and starting the container, you can directly visit `http://ip.address.of.server:5055` and access your new Jellyseerr instance, which can be used to manage Plex, Jellyfin, and Emby.
+- In order to access your Jellyseerr outside the local network, you have to set up your own reverse proxy. You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) and [Jellyseerr's reverse proxy documentation.](https://docs.jellyseerr.dev/extending-jellyseerr/reverse-proxy), OR use the Caddy community container that will automatically configure requests.$NC_DOMAIN to redirect to your Jellyseerr.
+- If you want to secure the installation with fail2ban, you might want to check out https://github.com/nextcloud/all-in-one/tree/main/community-containers/fail2ban
+- The config of Jellyseerr will be automatically included in AIO's backup solution!
+- See [here](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) how to add it to the AIO stack.
+
+### Repository
+https://github.com/Fallenbagel/jellyseerr
+
+### Maintainer
+https://github.com/Anvil5465

community-containers/local-ai/local-ai.json

@@ -29,10 +29,7 @@
                     "writeable": false
                 }
             ],
-            "devices": [
-                "/dev/dri"
-            ],
-            "enable_nvidia_gpu": true,
+            "enable_nvidia_gpu": false,
             "nextcloud_exec_commands": [
                 "mkdir '/mnt/ncdata/admin/files/nextcloud-aio-local-ai'",
                 "touch '/mnt/ncdata/admin/files/nextcloud-aio-local-ai/models.yaml'",

community-containers/local-ai/readme.md

@@ -7,7 +7,7 @@ This container bundles Local AI and auto-configures it for you.
 - Example for content of `models.yaml` (if you add all of them, it takes around 10GB additional space):
 ```yaml
 # Stable Diffusion in NCNN with c++, supported txt2img and img2img 
-- url: github:mudler/LocalAI/gallery/stablediffusion.yaml
+- url: github:mudler/LocalAI/blob/master/gallery/stablediffusion.yaml
   name: Stable_diffusion
 ```
 -  To make it work, you first need to browse `https://your-nc-domain.com/settings/admin/ai` and enable or disable specific features for your models in the openAI settings. Afterwards using the Nextcloud Assistant should work.

community-containers/npmplus/readme.md

@@ -3,7 +3,6 @@ This container contains a fork of the Nginx Proxy Manager, which is a WebUI for
 
 ### Notes
 - This container is incompatible with the [caddy](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy) community container. So make sure that you do not enable both at the same time!
-- You can ignore the NPM configuration of the reverse-proxy.md. The NPMplus fork already contains the changes of the advanced tab.
 - Make sure that no other service is using port `443 (tcp/upd)` or `81 (tcp)` on your host as otherwise the containers will fail to start. You can check this with `sudo netstat -tulpn | grep "443\|81"` before installing AIO.
 - Please change the default login data first, after you can read inside the logs that the default config for AIO is created and there are no errors.
 - After the container was started the first time, please check the logs for errors. Then you can open NPMplus on `https://<ip>:81` and change the password. 
@@ -11,7 +10,7 @@ This container contains a fork of the Nginx Proxy Manager, which is a WebUI for
 - If you want to use NPMplus behind a domain and outside localhost just create a new proxy host inside the NPMplus which proxies to `https`, `127.0.0.1` and port `81` - all other settings should be the same as for the AIO host.
 - If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume
 - The data (certs, configs, etc.) of NPMplus will be automatically included in AIOs backup solution!
-- **Important:** you always need to enable https for your hosts, since `DISABLE_HTTP` is set to true
+- **Important:** you always need to enable https for your hosts, since `DISABLE_HTTP` is set to true by default
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 
 ### Repository and Documentation

compose.yaml

@@ -29,11 +29,11 @@ services:
       # NEXTCLOUD_STARTUP_APPS: deck twofactor_totp tasks calendar contacts notes # Allows to modify the Nextcloud apps that are installed on starting AIO the first time. See https://github.com/nextcloud/all-in-one#how-to-change-the-nextcloud-apps-that-are-installed-on-the-first-startup
       # NEXTCLOUD_ADDITIONAL_APKS: imagemagick # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value. See https://github.com/nextcloud/all-in-one#how-to-add-os-packages-permanently-to-the-nextcloud-container
       # NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS: imagick # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value. See https://github.com/nextcloud/all-in-one#how-to-add-php-extensions-permanently-to-the-nextcloud-container
-      # NEXTCLOUD_ENABLE_DRI_DEVICE: true # This allows to enable the /dev/dri device in the Nextcloud container. ⚠️⚠️⚠️ Warning: this only works if the '/dev/dri' device is present on the host! If it should not exist on your host, don't set this to true as otherwise the Nextcloud container will fail to start! See https://github.com/nextcloud/all-in-one#how-to-enable-hardware-acceleration-for-nextcloud
-      # ENABLE_NVIDIA_GPU: true # This allows to enable the NVIDIA runtime and GPU access for containers that profit from it. ⚠️⚠️⚠️ Warning: this only works if an NVIDIA gpu is installed on the server. See https://github.com/nextcloud/all-in-one#how-to-enable-hardware-acceleration-for-nextcloud.
+      # NEXTCLOUD_ENABLE_DRI_DEVICE: true # This allows to enable the /dev/dri device for containers that profit from it. ⚠️⚠️⚠️ Warning: this only works if the '/dev/dri' device is present on the host! If it should not exist on your host, don't set this to true as otherwise the Nextcloud container will fail to start! See https://github.com/nextcloud/all-in-one#how-to-enable-hardware-acceleration-for-nextcloud
+      # NEXTCLOUD_ENABLE_NVIDIA_GPU: true # This allows to enable the NVIDIA runtime and GPU access for containers that profit from it. ⚠️⚠️⚠️ Warning: this only works if an NVIDIA gpu is installed on the server. See https://github.com/nextcloud/all-in-one#how-to-enable-hardware-acceleration-for-nextcloud.
       # NEXTCLOUD_KEEP_DISABLED_APPS: false # Setting this to true will keep Nextcloud apps that are disabled in the AIO interface and not uninstall them if they should be installed. See https://github.com/nextcloud/all-in-one#how-to-keep-disabled-apps
       # SKIP_DOMAIN_VALIDATION: false # This should only be set to true if things are correctly configured. See https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-skip-the-domain-validation
-      # TALK_PORT: 3478 # This allows to adjust the port that the talk container is using. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-talk-port
+      # TALK_PORT: 3478 # This allows to adjust the port that the talk container is using which is exposed on the host. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-talk-port
       # WATCHTOWER_DOCKER_SOCKET_PATH: /var/run/docker.sock # Needs to be specified if the docker socket on the host is not located in the default '/var/run/docker.sock'. Otherwise mastercontainer updates will fail. For macos it needs to be '/var/run/docker.sock'
     # security_opt: ["label:disable"] # Is needed when using SELinux
 

manual-install/latest.yml

@@ -251,7 +251,7 @@ services:
       - "9980"
     environment:
       - aliasgroup1=https://${NC_DOMAIN}:443
-      - extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true ${COLLABORA_SECCOMP_POLICY} --o:remote_font_config.url=https://${NC_DOMAIN}/apps/richdocuments/settings/fonts.json --o:net.post_allow_host[0]=0.0.0.0/0 --o:net.post_allow_host[1]=::/0
+      - extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true ${COLLABORA_SECCOMP_POLICY} --o:remote_font_config.url=https://${NC_DOMAIN}/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+
       - dictionaries=${COLLABORA_DICTIONARIES}
       - TZ=${TIMEZONE}
       - server_name=${NC_DOMAIN}

manual-install/readme.md

@@ -6,11 +6,13 @@ You can run the containers that are build for AIO with docker-compose. This come
 - You can run it without a container having access to the docker socket
 - You can modify all values on your own
 - You can run the containers with docker swarm
+- You can run this in environments where access to docker.io is not possible. See [this issue](https://github.com/nextcloud/all-in-one/discussions/5268).
 
 ### Disadvantages
 - You lose the AIO interface
 - You lose update notifications and automatic updates
 - You lose all AIO backup and restore features
+- You lose the built-in [Docker Socket Proxy container](https://github.com/nextcloud/docker-socket-proxy#readme) (needed for [Nextcloud App API](https://github.com/nextcloud/app_api#nextcloud-appapi))
 - You lose all community containers: https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers
 - **You need to know what you are doing, especially when modifying the compose.yaml file**
 - For updating, you need to strictly follow the at the bottom described update routine
@@ -23,7 +25,7 @@ git clone https://github.com/nextcloud/all-in-one.git
 cd all-in-one/manual-install
 ```
 Then copy the sample.conf to default environment file, e.g. `cp sample.conf .env`, open the new conf file, e.g. with `nano .env`, edit all values that are marked with `# TODO!`, close and save the file. (Note: there is no clamav image for arm64).<br>
-⚠️ **Warning**: Do not use the symbols `@` and `:` in your passwords. These symbols are used to build database connection strings. You will experience issues when using these symbols!
+⚠️ **Warning**: Do not use the symbols `@` and `:` in your passwords. These symbols are used to build database connection strings. You will experience issues when using these symbols! Also please note that values inside the latest.yaml that are not exposed as variables are not officially supported to be changed. See for example [this report](https://github.com/nextcloud/all-in-one/issues/5612).
 
 Now copy the provided yaml file to a compose.yaml file by running `cp latest.yml compose.yaml`.
 

manual-install/sample.conf

@@ -37,5 +37,5 @@ NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts notes"
 NEXTCLOUD_TRUSTED_CACERTS_DIR=/usr/local/share/ca-certificates/my-custom-ca          # Nextcloud container will trust all the Certification Authorities, whose certificates are included in the given directory.
 NEXTCLOUD_UPLOAD_LIMIT=16G          # This allows to change the upload limit of the Nextcloud container
 REMOVE_DISABLED_APPS=yes        # Setting this to no keep Nextcloud apps that are disabled via their switch and not uninstall them if they should be installed in Nextcloud.
-TALK_PORT=3478          # This allows to adjust the port that the talk container is using.
+TALK_PORT=3478          # This allows to adjust the port that the talk container is using. It should be set to something higher than 1024! Otherwise it might not work!
 UPDATE_NEXTCLOUD_APPS="no"          # When setting to "yes" (with quotes), it will automatically update all installed Nextcloud apps upon container startup on saturdays.

manual-install/update-yaml.sh

@@ -87,7 +87,7 @@ sed -i 's|NEXTCLOUD_TRUSTED_CACERTS_DIR=|NEXTCLOUD_TRUSTED_CACERTS_DIR=/usr/loca
 sed -i 's|UPDATE_NEXTCLOUD_APPS=|UPDATE_NEXTCLOUD_APPS="no"          # When setting to "yes" (with quotes), it will automatically update all installed Nextcloud apps upon container startup on saturdays.|' sample.conf
 sed -i 's|APACHE_PORT=|APACHE_PORT=443          # Changing this to a different value than 443 will allow you to run it behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else).|' sample.conf
 sed -i 's|APACHE_IP_BINDING=|APACHE_IP_BINDING=0.0.0.0          # This can be changed to e.g. 127.0.0.1 if you want to run AIO behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) and if that is running on the same host and using localhost to connect|' sample.conf
-sed -i 's|TALK_PORT=|TALK_PORT=3478          # This allows to adjust the port that the talk container is using.|' sample.conf
+sed -i 's|TALK_PORT=|TALK_PORT=3478          # This allows to adjust the port that the talk container is using. It should be set to something higher than 1024! Otherwise it might not work!|' sample.conf
 sed -i 's|NC_DOMAIN=|NC_DOMAIN=yourdomain.com          # TODO! Needs to be changed to the domain that you want to use for Nextcloud.|' sample.conf
 sed -i 's|NEXTCLOUD_PASSWORD=|NEXTCLOUD_PASSWORD=          # TODO! This is the password of the initially created Nextcloud admin with username "admin".|' sample.conf
 sed -i 's|TIMEZONE=|TIMEZONE=Europe/Berlin          # TODO! This is the timezone that your containers will use.|' sample.conf

migration.md

@@ -14,7 +14,7 @@ The procedure for migrating only the files works like this:
 1. Install Nextcloud AIO on a new server/linux installation, enter your domain and wait until all containers are running
 1. Recreate all users that were present on your former installation
 1. Take a backup using Nextcloud AIO's built-in backup solution (so that you can easily restore to this state again) (Note: this will stop all containers and is expected: don't start the container again at this point!)
-1. Restore the datadirectory of your former instance: for `/path/to/nextcloud/data/` run `sudo docker cp --follow-link /path/to/nextcloud/data/. nextcloud-aio-nextcloud:/mnt/ncdata/` Note: the `/.` and `/` at the end are necessary.
+1. Restore the datadirectory of your former instance: for `/path/to/old/nextcloud/data/` run `sudo docker cp --follow-link /path/to/old/nextcloud/data/. nextcloud-aio-nextcloud:/mnt/ncdata/` Note: the `/.` and `/` at the end are necessary.
 1. Next, run `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chown -R 33:0 /mnt/ncdata/` and `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chmod -R 750 /mnt/ncdata/` to apply the correct permissions. (Or if `NEXTCLOUD_DATADIR` was provided, apply `chown -R 33:0` and `chmod -R 750` to the chosen path.)
 1. Start the containers again and wait until all containers are running
 1. Run `sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan-app-data && sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ files:scan --all` in order to scan all files in the datadirectory.

nextcloud-aio-helm-chart/Chart.yaml

@@ -1,6 +1,6 @@
 name: nextcloud-aio-helm-chart
 description: A generated Helm Chart for Nextcloud AIO from Skippbox Kompose
-version: 10.1.1
+version: 10.4.0
 apiVersion: v2
 keywords:
   - latest

nextcloud-aio-helm-chart/templates/nextcloud-aio-apache-deployment.yaml

@@ -61,7 +61,7 @@ spec:
               value: "{{ .Values.TIMEZONE }}"
             - name: WHITEBOARD_HOST
               value: nextcloud-aio-whiteboard
-          image: nextcloud/aio-apache:20241216_102930
+          image: nextcloud/aio-apache:20250122_091948
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-clamav-deployment.yaml

@@ -53,7 +53,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
       containers:
         - env:
             - name: CLAMD_STARTUP_TIMEOUT
@@ -62,7 +61,7 @@ spec:
               value: "{{ .Values.NEXTCLOUD_UPLOAD_LIMIT }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-clamav:20241216_102930
+          image: nextcloud/aio-clamav:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -92,7 +91,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           volumeMounts:
             - mountPath: /var/lib/clamav
               subPath: data

nextcloud-aio-helm-chart/templates/nextcloud-aio-collabora-deployment.yaml

@@ -31,10 +31,10 @@ spec:
             - name: dictionaries
               value: "{{ .Values.COLLABORA_DICTIONARIES }}"
             - name: extra_params
-              value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true {{ .Values.COLLABORA_SECCOMP_POLICY }} --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json --o:net.post_allow_host[0]=0.0.0.0/0 --o:net.post_allow_host[1]=::/0
+              value: --o:ssl.enable=false --o:ssl.termination=true --o:mount_jail_tree=false --o:logging.level=warning --o:home_mode.enable=true {{ .Values.COLLABORA_SECCOMP_POLICY }} --o:remote_font_config.url=https://{{ .Values.NC_DOMAIN }}/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+
             - name: server_name
               value: "{{ .Values.NC_DOMAIN }}"
-          image: nextcloud/aio-collabora:20241216_102930
+          image: nextcloud/aio-collabora:20250122_091948
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-database-deployment.yaml

@@ -52,7 +52,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
       containers:
         - env:
             - name: PGTZ
@@ -65,7 +64,7 @@ spec:
               value: nextcloud
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-postgresql:20241216_102930
+          image: nextcloud/aio-postgresql:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -93,7 +92,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           volumeMounts:
             - mountPath: /var/lib/postgresql/data
               subPath: data

nextcloud-aio-helm-chart/templates/nextcloud-aio-fulltextsearch-deployment.yaml

@@ -54,7 +54,7 @@ spec:
               value: basic
             - name: xpack.security.enabled
               value: "false"
-          image: nextcloud/aio-fulltextsearch:20241216_102930
+          image: nextcloud/aio-fulltextsearch:20250122_091948
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-imaginary-deployment.yaml

@@ -38,7 +38,7 @@ spec:
               value: "{{ .Values.IMAGINARY_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-imaginary:20241216_102930
+          image: nextcloud/aio-imaginary:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -66,6 +66,4 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add:
-                - NET_BIND_SERVICE
 {{- end }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-nextcloud-deployment.yaml

@@ -90,6 +90,8 @@ spec:
               value: "{{ .Values.NEXTCLOUD_PASSWORD }}"
             - name: ADMIN_USER
               value: admin
+            - name: APACHE_HOST
+              value: nextcloud-aio-apache
             - name: APACHE_PORT
               value: "{{ .Values.APACHE_PORT }}"
             - name: CLAMAV_ENABLED
@@ -178,7 +180,7 @@ spec:
               value: "{{ .Values.WHITEBOARD_ENABLED }}"
             - name: WHITEBOARD_SECRET
               value: "{{ .Values.WHITEBOARD_SECRET }}"
-          image: nextcloud/aio-nextcloud:20241216_102930
+          image: nextcloud/aio-nextcloud:20250122_091948
           {{- if eq (.Values.RPSS_ENABLED | default "no") "yes" }} # AIO-config - do not change this comment!
           securityContext:
             # The items below only work in container context
@@ -189,7 +191,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           {{- end }} # AIO-config - do not change this comment!
           readinessProbe:
             exec:

nextcloud-aio-helm-chart/templates/nextcloud-aio-notify-push-deployment.yaml

@@ -53,7 +53,7 @@ spec:
               value: nextcloud-aio-redis
             - name: REDIS_HOST_PASSWORD
               value: "{{ .Values.REDIS_PASSWORD }}"
-          image: nextcloud/aio-notify-push:20241216_102930
+          image: nextcloud/aio-notify-push:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -81,7 +81,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           volumeMounts:
             - mountPath: /nextcloud
               name: nextcloud-aio-nextcloud

nextcloud-aio-helm-chart/templates/nextcloud-aio-onlyoffice-deployment.yaml

@@ -42,7 +42,7 @@ spec:
               value: "{{ .Values.ONLYOFFICE_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-onlyoffice:20241216_102930
+          image: nextcloud/aio-onlyoffice:20250122_091948
           readinessProbe:
             exec:
               command:

nextcloud-aio-helm-chart/templates/nextcloud-aio-redis-deployment.yaml

@@ -39,7 +39,7 @@ spec:
               value: "{{ .Values.REDIS_PASSWORD }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-redis:20241216_102930
+          image: nextcloud/aio-redis:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -67,7 +67,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           volumeMounts:
             - mountPath: /data
               name: nextcloud-aio-redis

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-deployment.yaml

@@ -52,7 +52,7 @@ spec:
               value: "{{ .Values.TURN_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk:20241216_102930
+          image: nextcloud/aio-talk:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -84,5 +84,4 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
 {{- end }}

nextcloud-aio-helm-chart/templates/nextcloud-aio-talk-recording-deployment.yaml

@@ -44,7 +44,7 @@ spec:
               value: "{{ .Values.RECORDING_SECRET }}"
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-talk-recording:20241216_102930
+          image: nextcloud/aio-talk-recording:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -72,7 +72,6 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           volumeMounts:
             - mountPath: /tmp
               name: nextcloud-aio-talk-recording

nextcloud-aio-helm-chart/templates/nextcloud-aio-whiteboard-deployment.yaml

@@ -46,7 +46,7 @@ spec:
               value: redis
             - name: TZ
               value: "{{ .Values.TIMEZONE }}"
-          image: nextcloud/aio-whiteboard:20241216_102930
+          image: nextcloud/aio-whiteboard:20250122_091948
           readinessProbe:
             exec:
               command:
@@ -74,5 +74,4 @@ spec:
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
 {{- end }}

nextcloud-aio-helm-chart/update-helm.sh

@@ -55,7 +55,7 @@ yq -i 'del(.services.[].tmpfs)' latest.yml
 # Remove cap_drop in order to add it later again easier
 yq -i 'del(.services.[].cap_drop)' latest.yml
 # Remove SYS_NICE for imaginary as it is not supported with RPSS
-sed -i "s|- SYS_NICE$|- NET_BIND_SERVICE|" latest.yml
+yq -i 'del(.services."nextcloud-aio-imaginary".cap_add)' latest.yml
 # cap SYS_ADMIN is called CAP_SYS_ADMIN in k8s
 sed -i "s|- SYS_ADMIN$|- CAP_SYS_ADMIN|" latest.yml
 
@@ -461,10 +461,9 @@ cat << EOL > /tmp/security.conf
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
 EOL
 # shellcheck disable=SC1083
-find ./ \( -not -name '*collabora-deployment.yaml*' -not -name '*imaginary-deployment.yaml*' -not -name '*onlyoffice-deployment.yaml*' -name "*deployment.yaml" \) -exec sed -i "/^          securityContext:$/r /tmp/security.conf" \{} \; 
+find ./ \( -not -name '*collabora-deployment.yaml*' -not -name '*apache-deployment.yaml*' -not -name '*onlyoffice-deployment.yaml*' -name "*deployment.yaml" \) -exec sed -i "/^          securityContext:$/r /tmp/security.conf" \{} \; 
 
 cat << EOL > /tmp/security.conf
             # The items below only work in container context
@@ -475,9 +474,11 @@ cat << EOL > /tmp/security.conf
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
+              add: ["NET_BIND_SERVICE"]
 EOL
+
 # shellcheck disable=SC1083
-find ./ -name '*imaginary-deployment.yaml*' -exec sed -i "/^          securityContext:$/r /tmp/security.conf" \{} \; 
+find ./ -name '*apache-deployment.yaml*' -exec sed -i "/^          securityContext:$/r /tmp/security.conf" \{} \; 
 
 cat << EOL > /tmp/security.conf
           {{- if eq (.Values.RPSS_ENABLED | default "no") "yes" }} # AIO-config - do not change this comment!
@@ -490,7 +491,6 @@ cat << EOL > /tmp/security.conf
               {{- else }}
               drop: ["NET_RAW"]
               {{- end }}
-              add: ["NET_BIND_SERVICE"]
           {{- end }} # AIO-config - do not change this comment!
 EOL
 # shellcheck disable=SC1083

nextcloud-aio-helm-chart/values.yaml

@@ -34,7 +34,7 @@ NEXTCLOUD_STARTUP_APPS: deck twofactor_totp tasks calendar contacts notes
 NEXTCLOUD_TRUSTED_CACERTS_DIR:        # Setting this to any value allows to automatically import root certificates into the Nextcloud container
 NEXTCLOUD_UPLOAD_LIMIT: 16G          # This allows to change the upload limit of the Nextcloud container
 REMOVE_DISABLED_APPS: yes        # Setting this to no keep Nextcloud apps that are disabled via their switch and not uninstall them if they should be installed in Nextcloud.
-TALK_PORT: 3478          # This allows to adjust the port that the talk container is using.
+TALK_PORT: 3478          # This allows to adjust the port that the talk container is using. It should be set to something higher than 1024! Otherwise it might not work!
 UPDATE_NEXTCLOUD_APPS: no          # When setting to yes (with quotes), it will automatically update all installed Nextcloud apps upon container startup on saturdays.
 
 STORAGE_CLASS:        # By setting this, you can adjust the storage class for your volumes

php/composer.lock

@@ -502,16 +502,16 @@
         },
         {
             "name": "php-di/invoker",
-            "version": "2.3.4",
+            "version": "2.3.6",
             "source": {
                 "type": "git",
                 "url": "https://github.com/PHP-DI/Invoker.git",
-                "reference": "33234b32dafa8eb69202f950a1fc92055ed76a86"
+                "reference": "59f15608528d8a8838d69b422a919fd6b16aa576"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/PHP-DI/Invoker/zipball/33234b32dafa8eb69202f950a1fc92055ed76a86",
-                "reference": "33234b32dafa8eb69202f950a1fc92055ed76a86",
+                "url": "https://api.github.com/repos/PHP-DI/Invoker/zipball/59f15608528d8a8838d69b422a919fd6b16aa576",
+                "reference": "59f15608528d8a8838d69b422a919fd6b16aa576",
                 "shasum": ""
             },
             "require": {
@@ -545,7 +545,7 @@
             ],
             "support": {
                 "issues": "https://github.com/PHP-DI/Invoker/issues",
-                "source": "https://github.com/PHP-DI/Invoker/tree/2.3.4"
+                "source": "https://github.com/PHP-DI/Invoker/tree/2.3.6"
             },
             "funding": [
                 {
@@ -553,7 +553,7 @@
                     "type": "github"
                 }
             ],
-            "time": "2023-09-08T09:24:21+00:00"
+            "time": "2025-01-17T12:49:27+00:00"
         },
         {
             "name": "php-di/php-di",
@@ -1348,12 +1348,12 @@
             },
             "type": "library",
             "extra": {
+                "thanks": {
+                    "url": "https://github.com/symfony/contracts",
+                    "name": "symfony/contracts"
+                },
                 "branch-alias": {
                     "dev-main": "3.5-dev"
-                },
-                "thanks": {
-                    "name": "symfony/contracts",
-                    "url": "https://github.com/symfony/contracts"
                 }
             },
             "autoload": {
@@ -1633,16 +1633,16 @@
         },
         {
             "name": "twig/twig",
-            "version": "v3.17.1",
+            "version": "v3.18.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/twigphp/Twig.git",
-                "reference": "677ef8da6497a03048192aeeb5aa3018e379ac71"
+                "reference": "acffa88cc2b40dbe42eaf3a5025d6c0d4600cc50"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/twigphp/Twig/zipball/677ef8da6497a03048192aeeb5aa3018e379ac71",
-                "reference": "677ef8da6497a03048192aeeb5aa3018e379ac71",
+                "url": "https://api.github.com/repos/twigphp/Twig/zipball/acffa88cc2b40dbe42eaf3a5025d6c0d4600cc50",
+                "reference": "acffa88cc2b40dbe42eaf3a5025d6c0d4600cc50",
                 "shasum": ""
             },
             "require": {
@@ -1697,7 +1697,7 @@
             ],
             "support": {
                 "issues": "https://github.com/twigphp/Twig/issues",
-                "source": "https://github.com/twigphp/Twig/tree/v3.17.1"
+                "source": "https://github.com/twigphp/Twig/tree/v3.18.0"
             },
             "funding": [
                 {
@@ -1709,7 +1709,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2024-12-12T09:58:10+00:00"
+            "time": "2024-12-29T10:51:50+00:00"
         }
     ],
     "packages-dev": [
@@ -1973,13 +1973,13 @@
             },
             "type": "library",
             "extra": {
-                "branch-alias": {
-                    "dev-main": "3.x-dev"
-                },
                 "phpstan": {
                     "includes": [
                         "extension.neon"
                     ]
+                },
+                "branch-alias": {
+                    "dev-main": "3.x-dev"
                 }
             },
             "autoload": {
@@ -2940,16 +2940,16 @@
         },
         {
             "name": "symfony/console",
-            "version": "v6.4.15",
+            "version": "v6.4.17",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/console.git",
-                "reference": "f1fc6f47283e27336e7cebb9e8946c8de7bff9bd"
+                "reference": "799445db3f15768ecc382ac5699e6da0520a0a04"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/console/zipball/f1fc6f47283e27336e7cebb9e8946c8de7bff9bd",
-                "reference": "f1fc6f47283e27336e7cebb9e8946c8de7bff9bd",
+                "url": "https://api.github.com/repos/symfony/console/zipball/799445db3f15768ecc382ac5699e6da0520a0a04",
+                "reference": "799445db3f15768ecc382ac5699e6da0520a0a04",
                 "shasum": ""
             },
             "require": {
@@ -3014,7 +3014,7 @@
                 "terminal"
             ],
             "support": {
-                "source": "https://github.com/symfony/console/tree/v6.4.15"
+                "source": "https://github.com/symfony/console/tree/v6.4.17"
             },
             "funding": [
                 {
@@ -3030,7 +3030,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2024-11-06T14:19:14+00:00"
+            "time": "2024-12-07T12:07:30+00:00"
         },
         {
             "name": "symfony/filesystem",
@@ -3100,16 +3100,16 @@
         },
         {
             "name": "symfony/finder",
-            "version": "v6.4.13",
+            "version": "v6.4.17",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/finder.git",
-                "reference": "daea9eca0b08d0ed1dc9ab702a46128fd1be4958"
+                "reference": "1d0e8266248c5d9ab6a87e3789e6dc482af3c9c7"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/finder/zipball/daea9eca0b08d0ed1dc9ab702a46128fd1be4958",
-                "reference": "daea9eca0b08d0ed1dc9ab702a46128fd1be4958",
+                "url": "https://api.github.com/repos/symfony/finder/zipball/1d0e8266248c5d9ab6a87e3789e6dc482af3c9c7",
+                "reference": "1d0e8266248c5d9ab6a87e3789e6dc482af3c9c7",
                 "shasum": ""
             },
             "require": {
@@ -3144,7 +3144,7 @@
             "description": "Finds files and directories via an intuitive fluent interface",
             "homepage": "https://symfony.com",
             "support": {
-                "source": "https://github.com/symfony/finder/tree/v6.4.13"
+                "source": "https://github.com/symfony/finder/tree/v6.4.17"
             },
             "funding": [
                 {
@@ -3160,7 +3160,7 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2024-10-01T08:30:56+00:00"
+            "time": "2024-12-29T13:51:37+00:00"
         },
         {
             "name": "symfony/polyfill-intl-grapheme",
@@ -3345,12 +3345,12 @@
             },
             "type": "library",
             "extra": {
+                "thanks": {
+                    "url": "https://github.com/symfony/contracts",
+                    "name": "symfony/contracts"
+                },
                 "branch-alias": {
                     "dev-main": "3.5-dev"
-                },
-                "thanks": {
-                    "name": "symfony/contracts",
-                    "url": "https://github.com/symfony/contracts"
                 }
             },
             "autoload": {

php/containers-schema.json

@@ -187,13 +187,6 @@
 							"pattern": "^[a-z-]+$"
 						}
 					},
-					"networks": {
-						"type": "array",
-						"items": {
-							"type": "string",
-							"pattern": "^nextcloud-aio$"
-						}
-					},
 					"read_only": {
 						"type": "boolean"
 					},

php/containers.json

@@ -67,9 +67,6 @@
         "nextcloud_aio_nextcloud",
         "nextcloud_aio_apache"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "tmpfs": [
         "/var/log/supervisord",
@@ -130,9 +127,6 @@
         "nextcloud_aio_database",
         "nextcloud_aio_database_dump"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "tmpfs": [
         "/var/run/postgresql"
@@ -268,9 +262,6 @@
       "backup_volumes": [
         "nextcloud_aio_nextcloud"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "cap_drop": [
         "NET_RAW"
       ]
@@ -317,9 +308,6 @@
         "POSTGRES_USER=nextcloud"
       ],
       "restart": "unless-stopped",
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "cap_drop": [
         "NET_RAW"
@@ -361,9 +349,6 @@
         "RECORDING_SECRET"
       ],
       "restart": "unless-stopped",
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "cap_drop": [
         "NET_RAW"
@@ -404,9 +389,6 @@
       "profiles": [
         "collabora"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "cap_add": [
         "MKNOD",
         "SYS_ADMIN"
@@ -466,9 +448,6 @@
         "talk",
         "talk-recording"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "tmpfs": [
         "/var/log/supervisord",
@@ -526,9 +505,6 @@
         "/dev/dri"
       ],
       "enable_nvidia_gpu": true,
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "tmpfs": [
         "/conf"
@@ -690,9 +666,6 @@
       "profiles": [
         "clamav"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "tmpfs": [
         "/var/lock",
@@ -745,9 +718,6 @@
       "profiles": [
         "onlyoffice"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "cap_drop": [
         "NET_RAW"
       ]
@@ -785,9 +755,6 @@
       "profiles": [
         "imaginary"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "read_only": true,
       "tmpfs": [
         "/tmp"
@@ -838,9 +805,6 @@
       "profiles": [
         "fulltextsearch"
       ],
-      "networks": [
-        "nextcloud-aio"
-      ],
       "secrets": [
         "FULLTEXTSEARCH_PASSWORD"
       ],
@@ -910,9 +874,6 @@
         "whiteboard"
       ],
       "read_only": true,
-      "networks": [
-        "nextcloud-aio"
-      ],
       "cap_drop": [
         "NET_RAW"
       ]

php/src/Container/Container.php

@@ -23,7 +23,7 @@ readonly class Container {
         private array                         $secrets,
         /** @var string[] */
         private array                         $devices,
-        private bool                          $enable_nvidia_gpu,
+        private bool                          $enableNvidiaGpu,
         /** @var string[] */
         private array                         $capAdd,
         private int                           $shmSize,
@@ -94,7 +94,7 @@ readonly class Container {
     }
 
     public function isNvidiaGpuEnabled() : bool {
-        return $this->enable_nvidia_gpu;
+        return $this->enableNvidiaGpu;
     }
 
     public function GetCapAdds() : array {

php/src/Data/ConfigurationManager.php

@@ -340,9 +340,9 @@ class ConfigurationManager
 
             if (!filter_var($dnsRecordIP, FILTER_VALIDATE_IP, FILTER_FLAG_NO_PRIV_RANGE | FILTER_FLAG_NO_RES_RANGE)) {
                 if ($port === '443') {
-                    throw new InvalidSettingConfigurationException("It seems like the ip-address of the domain is set to an internal or reserved ip-address. This is not supported. (It was found to be set to '" . $dnsRecordIP . "'). Please set it to a public ip-address so that the domain validation can work!");
+                    throw new InvalidSettingConfigurationException("It seems like the ip-address of the domain is set to an internal or reserved ip-address. This is not supported by the domain validation. (It was found to be set to '" . $dnsRecordIP . "'). Please set it to a public ip-address so that the domain validation can work or skip the domain validation!");
                 } else {
-                    error_log("It seems like the ip-address of " . $domain . " is set to an internal or reserved ip-address. (It was found to be set to '" . $dnsRecordIP . "')");
+                    error_log("Info: It seems like the ip-address of " . $domain . " is set to an internal or reserved ip-address. (It was found to be set to '" . $dnsRecordIP . "')");
                 }
             }
 
@@ -989,7 +989,7 @@ class ConfigurationManager
     }
 
     private function GetEnabledNvidiaGpu() : string {
-        $envVariableName = 'ENABLE_NVIDIA_GPU';
+        $envVariableName = 'NEXTCLOUD_ENABLE_NVIDIA_GPU';
         $configName = 'enable_nvidia_gpu';
         $defaultValue = '';
         return $this->GetEnvironmentalVariableOrConfig($envVariableName, $configName, $defaultValue);

php/templates/containers.twig

@@ -17,7 +17,7 @@
 
     <div class="container">
         <main>
-            <h1>Nextcloud AIO v10.2.0</h1>
+            <h1>Nextcloud AIO v10.4.0</h1>
 
             {# Add 2nd tab warning #}
             <script type="text/javascript" src="second-tab-warning.js"></script>
@@ -196,7 +196,7 @@
                                 </p>
                                 <form method="POST" action="/api/configuration" class="xhr">
                                     <label>Local backup location</label> <input type="text" name="borg_restore_host_location" value="{{borg_backup_host_location}}" placeholder="/mnt/backup"/><br>
-                                    <label>Remote borg repo</label> <input type="text" name="borg_restore_remote_repo" value="{{borg_remote_repo}}" placeholder="ssh://user@host:/path/to/repo"/><br>
+                                    <label>Remote borg repo</label> <input type="text" name="borg_restore_remote_repo" value="{{borg_remote_repo}}" placeholder="ssh://user@host:port/path/to/repo"/><br>
                                     <label>Borg passphrase</label> <input type="text" name="borg_restore_password" value="{{borg_restore_password}}" placeholder="encryption password"/><br>
                                     <input type="hidden" name="{{csrf.keys.name}}" value="{{csrf.name}}">
                                     <input type="hidden" name="{{csrf.keys.value}}" value="{{csrf.value}}">
@@ -394,7 +394,7 @@
                                 </p>
                                 <form method="POST" action="/api/configuration" class="xhr">
                                     <label>Local backup location</label> <input type="text" name="borg_backup_host_location" placeholder="/mnt/backup"/><br>
-                                    <label>Remote borg repo</label> <input type="text" name="borg_remote_repo" placeholder="ssh://user@host:/path/to/repo"/><br>
+                                    <label>Remote borg repo</label> <input type="text" name="borg_remote_repo" placeholder="ssh://user@host:port/path/to/repo"/><br>
                                     <input type="hidden" name="{{csrf.keys.name}}" value="{{csrf.name}}">
                                     <input type="hidden" name="{{csrf.keys.value}}" value="{{csrf.value}}">
                                     <input type="submit" value="Submit backup location" />
@@ -435,7 +435,7 @@
                                             <p>You may change the backup path again since the initial backup was not successful. After submitting the new value, you need to click on <strong>Create Backup</strong> to test the new value.</p>
                                             <form method="POST" action="/api/configuration" class="xhr">
                                                 <label>Local backup location</label> <input type="text" name="borg_backup_host_location" placeholder="/mnt/backup"/><br>
-                                                <label>Remote borg repo</label> <input type="text" name="borg_remote_repo" placeholder="ssh://user@host:/path/to/repo"/><br>
+                                                <label>Remote borg repo</label> <input type="text" name="borg_remote_repo" placeholder="ssh://user@host:port/path/to/repo"/><br>
                                                 <input type="hidden" name="{{csrf.keys.name}}" value="{{csrf.name}}">
                                                 <input type="hidden" name="{{csrf.keys.value}}" value="{{csrf.value}}">
                                                 <input type="submit" value="Set backup location again" />

php/templates/includes/optional-containers.twig

@@ -145,7 +145,7 @@
     <input id="options-form-submit" type="submit" value="Save changes" />
     <script type="text/javascript" src="options-form-submit.js?v3"></script>
 </form>
-<p><strong>Minimal system requirements:</strong> When any optional container is enabled, at least 2GB RAM, a dual-core CPU and 40GB system storage are required. When enabling ClamAV,  Nextcloud Talk Recording-server or Fulltextsearch, at least 3GB RAM are required. For Talk Recording-server additional 2 vCPUs are required. When enabling everything, at least 5GB RAM and a quad-core CPU are required. Recommended are at least 1GB more RAM than the minimal requirement. For further advices and recommendations see <strong><a href="https://github.com/nextcloud/all-in-one/discussions/1335">this documentation</a></strong></p>
+<p><strong>Minimal system requirements:</strong> When any optional container is enabled, at least 2GB RAM, a dual-core CPU and 40GB system storage are required. When enabling ClamAV,  Nextcloud Talk Recording-server or Fulltextsearch, at least 3GB RAM are required. For Talk Recording-server additional 2 vCPUs are required. When enabling everything, at least 5GB RAM and a quad-core CPU are required. Recommended are at least 1GB more RAM than the minimal requirement. For further advice and recommendations see <strong><a href="https://github.com/nextcloud/all-in-one/discussions/1335">this documentation</a></strong></p>
 {% if isAnyRunning == true or is_x64_platform == false %}
     <script type="text/javascript" src="disable-clamav.js"></script>
 {% endif %}

readme.md

@@ -429,7 +429,7 @@ Be aware that this solution does not back up files and folders that are mounted
 ---
 
 #### What is getting backed up by AIO's backup solution?
-Backed up will get all important data of your Nextcloud AIO instance like the database, your files and configuration files of the mastercontainer and else. Files and folders that are mounted into Nextcloud using the external storage app are not getting backed up. There is currently no way to exclude the data directory because it would require hacks like running files:scan and would make the backup solution much more unreliable (since the database and your files/folders need to stay in sync). If you still don't want your datadirectory to be backed up, see https://github.com/nextcloud/all-in-one#how-to-enable-automatic-updates-without-creating-a-backup-beforehand for options (there is a hint what needs to be backed up in which order).
+Backed up will get all important data of your Nextcloud AIO instance required to restore the instance, like the database, your files and configuration files of the mastercontainer and else. Files and folders that are mounted into Nextcloud using the external storage app are not getting backed up. There is currently no way to exclude the data directory because it would require hacks like running files:scan and would make the backup solution much more unreliable (since the database and your files/folders need to stay in sync). If you still don't want your datadirectory to be backed up, see https://github.com/nextcloud/all-in-one#how-to-enable-automatic-updates-without-creating-a-backup-beforehand for options (there is a hint what needs to be backed up in which order).
 
 #### How to adjust borgs retention policy?
 The built-in borg-based backup solution has by default a retention policy of `--keep-within=7d --keep-weekly=4 --keep-monthly=6`. See https://borgbackup.readthedocs.io/en/stable/usage/prune.html for what these values mean. You can adjust the retention policy by providing `--env BORG_RETENTION_POLICY="--keep-within=7d --keep-weekly=4 --keep-monthly=6"` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and customize the value to your fitting. ⚠️ Please make sure that this value is valid, otherwise backup pruning will bug out!
@@ -723,7 +723,7 @@ Be aware though that these locations will not be covered by the built-in backup
 > If you can't see the type "local storage" in the external storage admin options, a restart of the containers from the AIO interface may be required.
 
 ### How to adjust the Talk port?
-By default will the talk container use port `3478/UDP` and `3478/TCP` for connections. You can adjust the port by adding e.g. `--env TALK_PORT=3478` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and adjusting the port to your desired value. Best is to use a port over 1024, so e.g. 3479 to not run into this: https://github.com/nextcloud/all-in-one/discussions/2517
+By default will the talk container use port `3478/UDP` and `3478/TCP` for connections. This should be set to something higher than 1024! You can adjust the port by adding e.g. `--env TALK_PORT=3478` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and adjusting the port to your desired value. Best is to use a port over 1024, so e.g. 3479 to not run into this: https://github.com/nextcloud/all-in-one/discussions/2517
 
 ### How to adjust the upload limit for Nextcloud?
 By default, public uploads to Nextcloud are limited to a max of 16G (logged in users can upload much bigger files using the webinterface or the mobile/desktop clients, since chunking is used in that case). You can adjust the upload limit by providing `--env NEXTCLOUD_UPLOAD_LIMIT=16G` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and customize the value to your fitting. It must start with a number and end with `G` e.g. `16G`.
@@ -789,7 +789,7 @@ In order to use that, you need to add `--env NEXTCLOUD_ENABLE_DRI_DEVICE=true` t
 
 This method use the [Nvidia Container Toolkit](https://docs.nvidia.com/datacenter/cloud-native/container-toolkit/latest/index.html) with the nvidia runtime.
 
-In order to use that, you need to add `--env ENABLE_NVIDIA_GPU=true` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) which will enable the nvidia runtime.
+In order to use that, you need to add `--env NEXTCLOUD_ENABLE_NVIDIA_GPU=true` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) which will enable the nvidia runtime.
 
 If you're using WSL2 and want to use the NVIDIA runtime, please follow the instructions to [install the NVIDIA Container Toolkit meta-version in WSL](https://docs.nvidia.com/cuda/wsl-user-guide/index.html#cuda-support-for-wsl-2).
 

reverse-proxy.md

@@ -1,21 +1,66 @@
 # Reverse Proxy Documentation
 
-> [!NOTE]  
-> The maintainers of AIO noticed that this documentation could be improved to make it easier to follow. All contributions that improve this are very welcome!
-
-A [reverse proxy](https://en.wikipedia.org/wiki/Reverse_proxy) is a software service that acts as a gateway between services and a client. It is commonly used to allow a client connected to the Internet to access a website located in the [private subnet](https://en.wikipedia.org/wiki/Private_network) of that web server.
-
-**Please note:** Publishing the AIO interface with a valid certificate to the public internet is **not** the goal of this documentation! If you need a valid certificate for the AIO interface, see [point 5](#5-optional-get-a-valid-certificate-for-the-aio-interface).
+> [!NOTE]
+> Please note that AIO comes secured with TLS out-of-the-box. So you don't need to necessarily set up your own reverse proxy if you only want to run Nextcloud AIO which is much easier. See [the normal readme](https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-use-this) in that case. However if port 443 should already be used because you already run a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else), you need to follow this reverse proxy documentation to set up Nextcloud AIO.
 
+## Introduction
 In order to run Nextcloud behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else), you need to:
-1. specify the port that AIO's integrated Apache container shall use
-2. add a specific config to your web server or reverse proxy
-3. modify the startup command a bit.
-All examples below will use port `11000` as `APACHE_PORT`. This port will be exposed in the private network to receive unencrypted HTTP traffic from the reverse proxy.
+1. add a specific config to your web server or reverse proxy. [See the documentation below.](#1-configure-the-reverse-proxy)
+2. specify the port that AIO's integrated Apache container shall use via the environmental variable `APACHE_PORT` (that runs inside its own container and published this port on the host) and adjust the `docker run` command of AIO. [See the documentation below.](#2-use-this-startup-command).
+3. Open the AIO interface at port `8080` and type in and validate your domain. [See the documentation below.](#4-open-the-aio-interface)
+
+Here one example with all reverse proxy settings for Linux:
+```
+sudo docker run \
+--init \
+--sig-proxy=false \
+--name nextcloud-aio-mastercontainer \
+--restart always \
+--publish 8080:8080 \
+--env APACHE_PORT=11000 \
+--env APACHE_IP_BINDING=0.0.0.0 \
+--env APACHE_ADDITIONAL_NETWORK="" \
+--env SKIP_DOMAIN_VALIDATION=false \
+--volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config \
+--volume /var/run/docker.sock:/var/run/docker.sock:ro \
+nextcloud/all-in-one:latest
+```
+
+<details>
+
+<summary>Explanation of the command</summary>
+
+- `sudo docker run` This command spins up a new docker container. Docker commands can optionally be used without `sudo` if the user is added to the docker group (this is not the same as docker rootless, see FAQ in the normal readme).
+- `--init` This option makes sure that no zombie-processes are created, ever. See [the Docker documentation](https://docs.docker.com/reference/cli/docker/container/run/#init).
+- `--sig-proxy=false` This option allows to exit the container shell that gets attached automatically when using `docker run` by using `[CTRL] + [C]` without shutting down the container.
+- `--name nextcloud-aio-mastercontainer` This is the name of the container. This line is not allowed to be changed, since mastercontainer updates would fail.
+- `--restart always` This is the "restart policy". `always` means that the container should always get started with the Docker daemon. See the Docker documentation for further detail about restart policies: https://docs.docker.com/config/containers/start-containers-automatically/
+- `--publish 8080:8080` This means that port 8080 of the container should get published on the host using port 8080. This port is used for the AIO interface and uses a self-signed certificate by default. You can also use a different host port if port 8080 is already used on your host, for example `--publish 8081:8080` (only the first port can be changed for the host, the second port is for the container and must remain at 8080).
+- `--env APACHE_PORT=11000` This is the port that is published on the host that runs Docker and Nextcloud AIO at which the reverse proxy should point at.
+- `--env APACHE_IP_BINDING=0.0.0.0` This can be modified to allow access to the published port on the host only from certain ip-addresses. [See this documentation](#3-limit-the-access-to-the-apache-container)
+- `--env APACHE_ADDITIONAL_NETWORK=""` This can be used to put the sibling apache container that is created by AIO into a specified network - useful if your reverse proxy runs as a container on the same host. [See this documentation](#adapting-the-sample-web-server-configurations-below)
+- `--env SKIP_DOMAIN_VALIDATION=false` This can be set to `true` if the domain validation does not work and you are sure that you configured everything correctly after you followed [the debug documentation](#6-how-to-debug-things).
+- `--volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config` This means that the files that are created by the mastercontainer will be stored in a docker volume that is called `nextcloud_aio_mastercontainer`. This line is not allowed to be changed, since built-in backups would fail later on.
+- `--volume /var/run/docker.sock:/var/run/docker.sock:ro` The docker socket is mounted into the container which is used for spinning up all the other containers and for further features. It needs to be adjusted on Windows/macOS and on docker rootless. See the applicable documentation on this. If adjusting, don't forget to also set `WATCHTOWER_DOCKER_SOCKET_PATH`! If you dislike this, see https://github.com/nextcloud/all-in-one/tree/main/manual-install.
+- `nextcloud/all-in-one:latest` This is the docker container image that is used.
+- Further options can be set using environment variables, for example `--env NEXTCLOUD_DATADIR="/mnt/ncdata"` (This is an example for Linux. See [this](https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir) for other OS' and for an explanation of what this value does. This specific one needs to be specified upon the first startup if you want to change it to a specific path instead of the default Docker volume). To see explanations and examples for further variables (like changing the location of Nextcloud's datadir or mounting some locations as external storage into the Nextcloud container), read through this readme and look at the docker-compose file: https://github.com/nextcloud/all-in-one/blob/main/compose.yaml
+
+</details>
+
+> [!Note] 
+> If you run into troubles, see [the debug section](#6-how-to-debug-things).
+
+---
+
 > [!IMPORTANT] 
 > If you need HTTPS between Nextcloud and the reverse proxy because it is running on a different server in the same network, simply add another reverse proxy to the chain that runs on the same server like AIO and takes care of HTTPS proxying (most likely via self-signed certificates). Another option would be to create a VPN between the server that runs AIO and the server that runs the reverse proxy which takes care of encrypting the connection.
 
-**Attention:** The process to run Nextcloud behind a reverse proxy consists of at least steps 1, 2 and 4:
+> [!NOTE]
+> Since the Apache container gets created by the mastercontainer, there is **NO** way to provide custom docker labels or custom environmental variables for the Apache container. So please do not attempt to do this because it will fail!
+
+## Content
+
+The process to run Nextcloud behind a reverse proxy consists of at least steps 1, 2 and 4:
 1. **Configure the reverse proxy! See [point 1](#1-configure-the-reverse-proxy)**
 1. **Use this startup command! See [point 2](#2-use-this-startup-command)**
 1. Optional: if the reverse proxy is installed on the same host and in the host network, you should limit the apache container to only listen on localhost. See [point 3](#3-limit-the-access-to-the-apache-container)
@@ -23,8 +68,6 @@ All examples below will use port `11000` as `APACHE_PORT`. This port will be exp
 1. Optional: get a valid certificate for the AIO interface! See [point 5](#5-optional-get-a-valid-certificate-for-the-aio-interface)
 1. Optional: how to debug things? See [point 6](#6-how-to-debug-things)
 
-**Please note:** Since the Apache container gets created by the mastercontainer, there is **NO** way to provide custom docker labels or custom environmental variables for the Apache container. So please do not attempt to do this because it will fail!
-
 ## 1. Configure the reverse proxy
 
 ### Adapting the sample web server configurations below
@@ -368,7 +411,7 @@ server {
 
     client_max_body_size 0;
     client_body_buffer_size 512k;
-    http3_stream_buffer_size 512k;
+    # http3_stream_buffer_size 512k; # uncomment to enable HTTP/3 / QUIC - supported on nginx v1.25.0+
     proxy_read_timeout 86400s;
 
     server_name <your-nc-domain>;
@@ -719,7 +762,8 @@ Add the following `web.config` file to the root of the site you created as the r
   </system.web>
   <system.webServer>
     <rewrite>
-      <rules>
+      <!-- useOriginalURLEncoding needs to be set to false, otherwise IIS will double encode urls causing all files with spaces or special characters to be inaccessible -->
+      <rules useOriginalURLEncoding="false">
         <!-- Force https -->
         <rule name="Https" stopProcessing="true">
           <match url="(.*)" />
@@ -734,7 +778,8 @@ Add the following `web.config` file to the root of the site you created as the r
           <conditions>
             <add input="{HTTPS}" pattern="^ON$" />
           </conditions>
-          <action type="Rewrite" url="http://nc-server-farm:11000/{UNENCODED_URL}" appendQueryString="false" />
+          <!-- Note that {UNENCODED_URL} already contains starting slash, so we must add it directly after the port number without additional slash -->
+          <action type="Rewrite" url="http://nc-server-farm:11000{UNENCODED_URL}" appendQueryString="false" />
         </rule>
       </rules>
     </rewrite>
@@ -789,6 +834,8 @@ sudo docker run \
 --publish 8080:8080 \
 --env APACHE_PORT=11000 \
 --env APACHE_IP_BINDING=0.0.0.0 \
+--env APACHE_ADDITIONAL_NETWORK="" \
+--env SKIP_DOMAIN_VALIDATION=false \
 --volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config \
 --volume /var/run/docker.sock:/var/run/docker.sock:ro \
 nextcloud/all-in-one:latest
@@ -815,6 +862,8 @@ docker run ^
 --publish 8080:8080 ^
 --env APACHE_PORT=11000 ^
 --env APACHE_IP_BINDING=0.0.0.0 ^
+--env APACHE_ADDITIONAL_NETWORK="" ^
+--env SKIP_DOMAIN_VALIDATION=false ^
 --volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config ^
 --volume //var/run/docker.sock:/var/run/docker.sock:ro ^
 nextcloud/all-in-one:latest
@@ -836,7 +885,7 @@ Use this environment variable during the initial startup of the mastercontainer
 
 ## 4. Open the AIO interface
 
-After starting AIO, you should be able to access the AIO Interface via `https://ip.address.of.the.host:8080`.<br>
+After starting AIO, you should be able to access the AIO Interface via `https://ip.address.of.the.host:8080` and type in and validate the domain that you have configured.<br>
 ⚠️ **Important:** do always use an ip-address if you access this port and not a domain as HSTS might block access to it later! (It is also expected that this port uses a self-signed certificate due to security concerns which you need to accept in your browser)<br>
 Enter your domain in the AIO interface that you've used in the reverse proxy config and you should be done. Please do not forget to open/forward port `3478/TCP` and `3478/UDP` in your firewall/router for the Talk container!
 
@@ -871,5 +920,6 @@ If something does not work, follow the steps below:
 1. If you use Cloudflare, you might need to skip the domain validation anyways since it is known that Cloudflare might block the validation attempts. In that case, see the last option below!
 1. If your reverse proxy is configured to use the host network (as recommended in the above docs) or running on the host, make sure that you've configured your firewall to open port 443 (and 80)!
 1. Check if you have a public IPv4- and public IPv6-address. If you only have a public IPv6-address (e.g. due to DS-Lite), make sure to enable IPv6 in Docker and your whole networking infrastructure (e.g. also by adding an AAAA DNS-entry to your domain)!
+1. [Enable Hairpin NAT in your router](https://github.com/nextcloud/all-in-one/discussions/5849) or [set up a local DNS server and add a custom dns-record](https://github.com/nextcloud/all-in-one#how-can-i-access-nextcloud-locally) that allows the server to reach itself locally
 1. Try to configure everything from scratch - if it still does not work by following https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance.
 1. As last resort, you may disable the domain validation by adding `--env SKIP_DOMAIN_VALIDATION=true` to the docker run command. But only use this if you are completely sure that you've correctly configured everything!

tests/QA/060-environmental-variables.md

@@ -21,6 +21,7 @@ See https://github.com/nextcloud/all-in-one#how-to-trust-user-defined-certificat
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_ADDITIONAL_APKS=zip`, the resulting Nextcloud container should have the zip package installed and not imagemagick.
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=inotify`, the resulting Nextcloud container should have the inotify extension installed and not the imagick extension.
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_ENABLE_DRI_DEVICE=true`, the resulting Nextcloud container should have the /dev/dri device mounted into the container. (Only works if a `/dev/dri` device is present on the host)
+- [ ] When starting the mastercontainer with `--env NEXTCLOUD_ENABLE_NVIDIA_GPU=true`, the resulting Nextcloud container should have the nvidia gpu device mounted into the container. (Only works if a Nvidia GPU and runtime is installed on the host)
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_KEEP_DISABLED_APPS=true` it should keep apps in Nextcloud that are disabled in the AIO interface. For example if Collabora is disabled in the AIO interface and you install the richdocuments app in Nextcloud, a restart should not uninstall the richdocuments app in Nextcloud anymore.
 - [ ] When starting the mastercontainer with `--env AIO_COMMUNITY_CONTAINERS="fail2ban"`, it should add the fail2ban container to the container stack and show it in the AIO interface as well as start it, etc.