increase to 13.0.2

Signed-off-by: Simon L. <szaimen@e.mail.de>

.github/workflows/fail-on-prerelease.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: "Check latest published release isn't a prerelease"
-        uses: actions/github-script@ed597411d8f924073f98dfc5c65a23a2325f34cd # v6
+        uses: actions/github-script@3a2844b7e9c422d3c10d287c895573f7108da1b3 # v6
         with:
           script: |
             const tags = await github.rest.repos.listTags({

.github/workflows/helm-release.yml

@@ -32,7 +32,7 @@ jobs:
 
       # See https://github.com/helm/chart-releaser-action/issues/6
       - name: Set up Helm
-        uses: azure/setup-helm@1a275c3b69536ee54be43f2070a358922e12c8d4 # v4
+        uses: azure/setup-helm@dda3372f752e03dde6b3237bc9431cdc2f7a02a2 # v5.0.0
         with:
           version: v3.6.3
 

.github/workflows/lint-helm.yml

@@ -16,7 +16,7 @@ jobs:
           fetch-depth: 0
 
       - name: Install Helm
-        uses: azure/setup-helm@1a275c3b69536ee54be43f2070a358922e12c8d4 # v4
+        uses: azure/setup-helm@dda3372f752e03dde6b3237bc9431cdc2f7a02a2 # v5.0.0
         with:
           version: v3.11.1
 

.github/workflows/lint-yaml.yml

@@ -36,7 +36,7 @@ jobs:
             line-length: warning
 
       - name: Install the latest version of uv
-        uses: astral-sh/setup-uv@37802adc94f370d6bfd71619e3f0bf239e1f3b78 # v7.6.0
+        uses: astral-sh/setup-uv@08807647e7069bb48b6ef5acd8ec9567f424441b # v8.1.0
 
       - name: Check GitHub actions
         run: uvx zizmor --min-severity medium .github/workflows/*.yml

.github/workflows/playwright-on-push.yml

@@ -5,12 +5,14 @@ on:
     paths:
       - 'php/**'
       - 'Containers/mastercontainer/*.Caddyfile'
+      - 'Containers/mastercontainer/start.sh'
   push:
     branches:
       - main
     paths:
       - 'php/**'
       - 'Containers/mastercontainer/*.Caddyfile'
+      - 'Containers/mastercontainer/start.sh'
 
 concurrency:
   group: playwright-${{ github.head_ref || github.run_id }}
@@ -55,7 +57,7 @@ jobs:
           rm -r ./session
           composer install --no-dev
           composer clear-cache
-          sudo chmod 777 -R ./
+          sudo chmod 777 -R ../
 
       - name: Start fresh development server
         run: |
@@ -72,6 +74,7 @@ jobs:
             --volume ./php:/var/www/docker-aio/php \
             --volume ./Containers/mastercontainer/internal.Caddyfile:/internal.Caddyfile \
             --volume ./Containers/mastercontainer/headers.Caddyfile:/headers.Caddyfile \
+            --volume ./Containers/mastercontainer/start.sh:/start.sh \
             --volume /var/run/docker.sock:/var/run/docker.sock:ro \
             --env SKIP_DOMAIN_VALIDATION=true \
             --env APACHE_PORT=11000 \
@@ -103,6 +106,7 @@ jobs:
             --volume ./php:/var/www/docker-aio/php \
             --volume ./Containers/mastercontainer/internal.Caddyfile:/internal.Caddyfile \
             --volume ./Containers/mastercontainer/headers.Caddyfile:/headers.Caddyfile \
+            --volume ./Containers/mastercontainer/start.sh:/start.sh \
             --volume /var/run/docker.sock:/var/run/docker.sock:ro \
             --env SKIP_DOMAIN_VALIDATION=false \
             --env APACHE_PORT=11000 \

Containers/apache/Dockerfile

@@ -2,7 +2,7 @@
 FROM caddy:2.11.2-alpine AS caddy
 
 # From https://github.com/docker-library/httpd/blob/master/2.4/alpine/Dockerfile
-FROM httpd:2.4.66-alpine3.23
+FROM httpd:2.4.67-alpine3.23
 
 COPY --from=caddy /usr/bin/caddy /usr/bin/caddy
 

Containers/apache/healthcheck.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 nc -z "$NEXTCLOUD_HOST" 9000 || exit 0
 nc -z 127.0.0.1 8000 || exit 1
 nc -z 127.0.0.1 "$APACHE_PORT" || exit 1

Containers/apache/nextcloud.conf

@@ -7,7 +7,7 @@ Listen 8000
     LogFormat "%{X-Forwarded-For}i %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" proxy
     ErrorLog /proc/self/fd/2
     ErrorLogFormat "[%t] [%l] [%E] [client: %{X-Forwarded-For}i] [%M] [%{User-Agent}i]"
-    LogLevel warn
+    LogLevel ${AIO_LOG_LEVEL}
 
     # KeepAlive On: allow the same TCP connection to carry multiple HTTP requests.
     # Without this each asset (JS, CSS, image) would require a full TCP handshake,

Containers/apache/start.sh

@@ -1,10 +1,20 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if [ -z "$NC_DOMAIN" ]; then
     echo "NC_DOMAIN and NEXTCLOUD_HOST need to be provided. Exiting!"
     exit 1
 fi
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    export SUPERVISORD_STDOUT=/dev/stdout
+else
+    export SUPERVISORD_STDOUT=NONE
+fi
+
 # Need write access to /mnt/data
 if ! [ -w /mnt/data ]; then
     echo "Cannot write to /mnt/data"

Containers/apache/supervisord.conf

@@ -5,11 +5,11 @@ pidfile=/var/run/supervisord/supervisord.pid
 childlogdir=/var/log/supervisord/
 logfile_maxbytes=50MB                           
 logfile_backups=10                              
-loglevel=error
+loglevel=%(ENV_AIO_LOG_LEVEL)s
 
 [program:apache]
 # Stdout logging is disabled as otherwise the logs are spammed
-stdout_logfile=NONE
+stdout_logfile=%(ENV_SUPERVISORD_STDOUT)s
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
 command=apachectl -DFOREGROUND

Containers/borgbackup/backupscript.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Functions
 get_start_time(){
     START_TIME=$(date +%s)
@@ -40,7 +44,7 @@ if [ -z "$BORG_REMOTE_REPO" ] && ! mountpoint -q "$MOUNT_DIR"; then
 fi
 
 # Check if repo is uninitialized
-if [ "$BORG_MODE" != backup ] && [ "$BORG_MODE" != test ] && ! borg info > /dev/null; then
+if [ "$BORG_MODE" != backup ] && [ "$BORG_MODE" != test ] && ! borg "$BORG_LOG_LEVEL_FLAG" info > /dev/null; then
     if [ -n "$BORG_REMOTE_REPO" ]; then
         echo "The repository is uninitialized or cannot connect to remote. Cannot perform check or restore."
     else
@@ -123,7 +127,7 @@ if [ "$BORG_MODE" = backup ]; then
     fi
 
     # Initialize the repository if can't get info from target
-    if ! borg info > /dev/null; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" info > /dev/null; then
         # Don't initialize if already initialized
         if [ -f "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/borg.config" ]; then
             if [ -n "$BORG_REMOTE_REPO" ]; then
@@ -140,14 +144,14 @@ if [ "$BORG_MODE" = backup ]; then
 
         echo "Initializing repository..."
         NEW_REPOSITORY=1
-        if ! borg init --debug --encryption=repokey-blake2; then
+        if ! borg "$BORG_LOG_LEVEL_FLAG" init --encryption=repokey-blake2; then
             echo "Could not initialize borg repository."
             exit 1
         fi
 
         if [ -z "$BORG_REMOTE_REPO" ]; then
             # borg config only works for local repos; it's up to the remote to ensure the disk isn't full
-            borg config :: additional_free_space 2G
+            borg "$BORG_LOG_LEVEL_FLAG" config :: additional_free_space 2G
 
             # Fix too large Borg cache
             # https://borgbackup.readthedocs.io/en/stable/faq.html#the-borg-cache-eats-way-too-much-disk-space-what-can-i-do
@@ -156,7 +160,7 @@ if [ "$BORG_MODE" = backup ]; then
             touch "/root/.cache/borg/$BORG_ID/chunks.archive.d"
         fi
 
-        if ! borg info > /dev/null; then
+        if ! borg "$BORG_LOG_LEVEL_FLAG" info > /dev/null; then
             echo "Borg can't get info from the repo it created. Something is wrong."
             exit 1
         fi
@@ -216,9 +220,9 @@ if [ "$BORG_MODE" = backup ]; then
     # Create the backup
     echo "Starting the backup..."
     get_start_time
-    if ! borg create "${BORG_OPTS[@]}" "${BORG_INCLUDE[@]}" "${BORG_EXCLUDE[@]}" "::$CURRENT_DATE-nextcloud-aio" "/nextcloud_aio_volumes/" --exclude-from /borg_excludes; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" create "${BORG_OPTS[@]}" "${BORG_INCLUDE[@]}" "${BORG_EXCLUDE[@]}" "::$CURRENT_DATE-nextcloud-aio" "/nextcloud_aio_volumes/" --exclude-from /borg_excludes; then
         echo "Deleting the failed backup archive..."
-        borg delete --stats "::$CURRENT_DATE-nextcloud-aio"
+        borg "$BORG_LOG_LEVEL_FLAG" delete --stats "::$CURRENT_DATE-nextcloud-aio"
         echo "Backup failed!"
         echo "You might want to check the backup integrity via the AIO interface."
         if [ "$NEW_REPOSITORY" = 1 ]; then
@@ -237,14 +241,14 @@ if [ "$BORG_MODE" = backup ]; then
 
     # Prune archives
     echo "Pruning the archives..."
-    if ! borg prune --stats --glob-archives '*_*-nextcloud-aio' "${BORG_PRUNE_OPTS[@]}"; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" prune --stats --glob-archives '*_*-nextcloud-aio' "${BORG_PRUNE_OPTS[@]}"; then
         echo "Failed to prune archives!"
         exit 1
     fi
 
     # Compact archives
     echo "Compacting the archives..."
-    if ! borg compact; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" compact; then
         echo "Failed to compact archives!"
         exit 1
     fi
@@ -261,19 +265,19 @@ if [ "$BORG_MODE" = backup ]; then
                 fi
             done
             echo "Starting the backup for additional volumes..."
-            if ! borg create "${BORG_OPTS[@]}" "::$CURRENT_DATE-additional-docker-volumes" "/docker_volumes/"; then
+            if ! borg "$BORG_LOG_LEVEL_FLAG" create "${BORG_OPTS[@]}" "::$CURRENT_DATE-additional-docker-volumes" "/docker_volumes/"; then
                 echo "Deleting the failed backup archive..."
-                borg delete --stats "::$CURRENT_DATE-additional-docker-volumes"
+                borg "$BORG_LOG_LEVEL_FLAG" delete --stats "::$CURRENT_DATE-additional-docker-volumes"
                 echo "Backup of additional docker-volumes failed!"
                 exit 1
             fi
             echo "Pruning additional volumes..."
-            if ! borg prune --stats --glob-archives '*_*-additional-docker-volumes' "${BORG_PRUNE_OPTS[@]}"; then
+            if ! borg "$BORG_LOG_LEVEL_FLAG" prune --stats --glob-archives '*_*-additional-docker-volumes' "${BORG_PRUNE_OPTS[@]}"; then
                 echo "Failed to prune additional docker-volumes archives!"
                 exit 1
             fi
             echo "Compacting additional volumes..."
-            if ! borg compact; then
+            if ! borg "$BORG_LOG_LEVEL_FLAG" compact; then
                 echo "Failed to compact additional docker-volume archives!"
                 exit 1
             fi
@@ -291,19 +295,19 @@ if [ "$BORG_MODE" = backup ]; then
                 EXCLUDE_DIRS+=(--exclude "/host_mounts/$directory/")
             done
             echo "Starting the backup for additional host mounts..."
-            if ! borg create "${BORG_OPTS[@]}" "${EXCLUDE_DIRS[@]}" "::$CURRENT_DATE-additional-host-mounts" "/host_mounts/"; then
+            if ! borg "$BORG_LOG_LEVEL_FLAG" create "${BORG_OPTS[@]}" "${EXCLUDE_DIRS[@]}" "::$CURRENT_DATE-additional-host-mounts" "/host_mounts/"; then
                 echo "Deleting the failed backup archive..."
-                borg delete --stats "::$CURRENT_DATE-additional-host-mounts"
+                borg "$BORG_LOG_LEVEL_FLAG" delete --stats "::$CURRENT_DATE-additional-host-mounts"
                 echo "Backup of additional host-mounts failed!"
                 exit 1
             fi
             echo "Pruning additional host mounts..."
-            if ! borg prune --stats --glob-archives '*_*-additional-host-mounts' "${BORG_PRUNE_OPTS[@]}"; then
+            if ! borg "$BORG_LOG_LEVEL_FLAG" prune --stats --glob-archives '*_*-additional-host-mounts' "${BORG_PRUNE_OPTS[@]}"; then
                 echo "Failed to prune additional host-mount archives!"
                 exit 1
             fi
             echo "Compacting additional host mounts..."
-            if ! borg compact; then
+            if ! borg "$BORG_LOG_LEVEL_FLAG" compact; then
                 echo "Failed to compact additional host-mount archives!"
                 exit 1
             fi
@@ -385,7 +389,7 @@ if [ "$BORG_MODE" = restore ]; then
 
     if [ -z "$BORG_REMOTE_REPO" ]; then
         mkdir -p /tmp/borg
-        if ! borg mount "::$SELECTED_ARCHIVE" /tmp/borg; then
+        if ! borg "$BORG_LOG_LEVEL_FLAG" mount "::$SELECTED_ARCHIVE" /tmp/borg; then
             echo "Could not mount the backup!"
             exit 1
         fi
@@ -432,7 +436,7 @@ if [ "$BORG_MODE" = restore ]; then
         #
         # Older backups may still contain files we've since excluded, so we have to exclude on extract as well.
         cd /  # borg extract has no destination arg and extracts to CWD
-        if ! borg extract "::$SELECTED_ARCHIVE" --progress --exclude-from /borg_excludes "${ADDITIONAL_BORG_EXCLUDES[@]}" --pattern '+nextcloud_aio_volumes/**'
+        if ! borg "$BORG_LOG_LEVEL_FLAG" extract "::$SELECTED_ARCHIVE" --progress --exclude-from /borg_excludes "${ADDITIONAL_BORG_EXCLUDES[@]}" --pattern '+nextcloud_aio_volumes/**'
         then
             RESTORE_FAILED=1
             echo "Failed to extract backup archive."
@@ -464,7 +468,7 @@ if [ "$BORG_MODE" = restore ]; then
                     \) \
                     | LC_ALL=C sort \
                     | LC_ALL=C comm -23 - \
-                        <(borg list "::$SELECTED_ARCHIVE" --short --exclude-from /borg_excludes  --pattern '+nextcloud_aio_volumes/**' | LC_ALL=C sort) \
+                        <(borg "$BORG_LOG_LEVEL_FLAG" list "::$SELECTED_ARCHIVE" --short --exclude-from /borg_excludes  --pattern '+nextcloud_aio_volumes/**' | LC_ALL=C sort) \
                     > /tmp/local_files_not_in_backup
             then
                 RESTORE_FAILED=1
@@ -552,7 +556,7 @@ if [ "$BORG_MODE" = check ]; then
     echo "Checking the backup integrity..."
 
     # Perform the check
-    if ! borg check -v --verify-data; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" check -v --verify-data; then
         echo "Some errors were found while checking the backup integrity!"
         echo "Check the AIO interface for advice on how to proceed now!"
         exit 1
@@ -570,7 +574,7 @@ if [ "$BORG_MODE" = "check-repair" ]; then
     echo "Checking the backup integrity and repairing it..."
 
     # Perform the check-repair
-    if ! echo YES | borg check -v --repair; then
+    if ! echo YES | borg "$BORG_LOG_LEVEL_FLAG" check -v --repair; then
         echo "Some errors were found while checking and repairing the backup integrity!"
         exit 1
     fi
@@ -584,7 +588,7 @@ fi
 # Do the backup test
 if [ "$BORG_MODE" = test ]; then
     if [ -n "$BORG_REMOTE_REPO" ]; then
-        if ! borg info > /dev/null; then
+        if ! borg "$BORG_LOG_LEVEL_FLAG" info > /dev/null; then
             echo "Borg could not get info from the remote repo."
             echo "See the above borg info output for details."
             exit 1
@@ -605,12 +609,12 @@ if [ "$BORG_MODE" = test ]; then
         fi
     fi
 
-    if ! borg list >/dev/null; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" list >/dev/null; then
         echo "The entered path seems to be valid but could not open the backup archive."
         echo "Most likely the entered password was wrong so please adjust it accordingly!"
         exit 1
     else
-        if ! borg list | grep "nextcloud-aio"; then
+        if ! borg "$BORG_LOG_LEVEL_FLAG" list | grep "nextcloud-aio"; then
             echo "The backup archive does not contain a valid Nextcloud AIO backup."
             echo "Most likely was the archive not created via Nextcloud AIO."
             exit 1
@@ -623,7 +627,7 @@ fi
 
 if [ "$BORG_MODE" = list ]; then
     echo "Updating backup list..."
-    if ! borg info > /dev/null; then
+    if ! borg "$BORG_LOG_LEVEL_FLAG" info > /dev/null; then
         echo "Could not update the backup list."
         exit 1
     fi

Containers/borgbackup/start.sh

@@ -1,5 +1,16 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+if [ "$AIO_LOG_LEVEL" = "warn" ]; then
+    BORG_LOG_LEVEL_FLAG="--warning"
+else
+    BORG_LOG_LEVEL_FLAG="--$AIO_LOG_LEVEL"
+fi
+export BORG_LOG_LEVEL_FLAG
+
 # Variables
 export MOUNT_DIR="/mnt/borgbackup"
 export BORG_BACKUP_DIRECTORY="$MOUNT_DIR/borg"  # necessary even when remote to store the aio-lockfile
@@ -48,7 +59,7 @@ fi
 rm -f "/nextcloud_aio_volumes/nextcloud_aio_database_dump/backup-is-running"
 
 # Get a list of all available borg archives
-if borg list &>/dev/null; then
+if borg "$BORG_LOG_LEVEL_FLAG" list &>/dev/null; then
     borg list | grep "nextcloud-aio" | awk -F " " '{print $1","$3,$4}' > "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/backup_archives.list"
 else
     echo "" > "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/backup_archives.list"

Containers/clamav/Dockerfile

@@ -13,6 +13,15 @@ RUN set -ex; \
     sed -i "s|#\?PCREMaxFileSize.*|PCREMaxFileSize 2000M|g" /etc/clamav/clamd.conf; \
 # StreamMaxLength must be synced with av_stream_max_length inside the Nextcloud files_antivirus plugin
     sed -i "s|#\?StreamMaxLength.*|StreamMaxLength 2000M|g" /etc/clamav/clamd.conf; \
+# By default clamd keeps the old signature database in RAM while loading the new one,
+# briefly doubling memory usage (~1 GB extra) during each freshclam update cycle.
+# Setting ConcurrentDatabaseReload to "no" makes clamd unload the old database first,
+# eliminating that transient peak and significantly reducing maximum RAM consumption.
+    sed -i "s|#\?ConcurrentDatabaseReload.*|ConcurrentDatabaseReload no|g" /etc/clamav/clamd.conf; \
+# The default thread pool is 10-12 threads, each reserving its own stack and scan buffers.
+# The Nextcloud antivirus plugin sends one file at a time, so 2 threads are sufficient
+# and avoids the idle per-thread memory overhead of the larger default pool.
+    sed -i "s|#\?MaxThreads.*|MaxThreads 2|g" /etc/clamav/clamd.conf; \
     sed -i "s|#\?TCPSocket|TCPSocket|g" /etc/clamav/clamd.conf; \
     sed -i "s|^LocalSocket .*|LocalSocket /tmp/clamd.sock|g" /etc/clamav/clamd.conf; \
     sed -i "s|Example| |g" /etc/clamav/clamav-milter.conf; \

Containers/clamav/healthcheck.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if [ "$(echo "PING" | nc 127.0.0.1 3310)" != "PONG" ]; then
 	echo "ERROR: Unable to contact server"
 	exit 1

Containers/clamav/start.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+	set -x
+fi
+
 # Print out clamav version for compliance reasons
 clamscan --version
 

Containers/clamav/supervisord.conf

@@ -1,12 +1,11 @@
 [supervisord]
 nodaemon=true
-nodaemon=true
 logfile=/var/log/supervisord/supervisord.log
 pidfile=/var/run/supervisord/supervisord.pid
 childlogdir=/var/log/supervisord/
 logfile_maxbytes=50MB                           
 logfile_backups=10                              
-loglevel=error
+loglevel=%(ENV_AIO_LOG_LEVEL)s
 
 [program:freshclam]
 stdout_logfile=/dev/stdout

Containers/collabora/Dockerfile

@@ -5,6 +5,7 @@ FROM collabora/code:25.04.9.4.1
 USER root
 ARG DEBIAN_FRONTEND=noninteractive
 
+COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
 USER 1001
@@ -18,3 +19,5 @@ LABEL com.centurylinklabs.watchtower.enable="false" \
     org.opencontainers.image.source="https://github.com/nextcloud/all-in-one" \
     org.opencontainers.image.vendor="Nextcloud" \
     org.opencontainers.image.documentation="https://github.com/nextcloud/all-in-one/blob/main/readme.md"
+
+ENTRYPOINT ["/start.sh"]

Containers/collabora/start.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+if [ "$AIO_LOG_LEVEL" = "warn" ]; then
+    COLLABORA_LOG_LEVEL="warning"
+elif [ "$AIO_LOG_LEVEL" = "info" ]; then
+    COLLABORA_LOG_LEVEL="notice"
+else
+    COLLABORA_LOG_LEVEL="$AIO_LOG_LEVEL"
+fi
+
+# Replace the hardcoded log level in extra_params with the translated one
+extra_params+=" --o:logging.level=$COLLABORA_LOG_LEVEL --o:logging.level_startup=$COLLABORA_LOG_LEVEL"
+export extra_params
+
+exec /start-collabora-online.sh "$@"

Containers/docker-socket-proxy/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM haproxy:3.3.6-alpine
+FROM haproxy:3.3.8-alpine
 
 # hadolint ignore=DL3002
 USER root

Containers/docker-socket-proxy/healthcheck.sh

@@ -1,4 +1,8 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 nc -z "$NEXTCLOUD_HOST" 9001 || exit 0
 nc -z 127.0.0.1 2375 || exit 1

Containers/docker-socket-proxy/start.sh

@@ -1,5 +1,9 @@
 #!/bin/sh
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Only start container if nextcloud is accessible
 while ! nc -z "$NEXTCLOUD_HOST" 9001; do
     echo "Waiting for Nextcloud to start..."
@@ -18,6 +22,8 @@ else
     HAPROXYFILE="$(sed "s# || { src NC_IPV6_PLACEHOLDER }##g" /tmp/haproxy.cfg)"
 fi
 echo "$HAPROXYFILE" > /tmp/haproxy.cfg
-set +x
+if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+    set +x
+fi
 
 haproxy -f /tmp/haproxy.cfg -db

Containers/domaincheck/start.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if [ -z "$INSTANCE_ID" ]; then
     echo "You need to provide an instance id."
     exit 1
@@ -14,6 +18,20 @@ fi
 CONF_FILE="$(sed "s|ipv6-placeholder|\[::\]:$APACHE_PORT|" /lighttpd.conf)"
 echo "$CONF_FILE" > /etc/lighttpd/lighttpd.conf
 
+# shellcheck disable=SC2235
+if ([ "$AIO_LOG_LEVEL" = 'debug' ] || [ "$AIO_LOG_LEVEL" = 'info' ]) && ! grep -q debug.log-request-handling /etc/lighttpd/lighttpd.conf; then
+    cat << CONF_FILE >> /etc/lighttpd/lighttpd.conf
+debug.log-request-handling = "enable"
+CONF_FILE
+fi
+
+if [ "$AIO_LOG_LEVEL" = 'debug' ] && ! grep -q debug.log-request-header /etc/lighttpd/lighttpd.conf; then
+    cat << CONF_FILE >> /etc/lighttpd/lighttpd.conf
+debug.log-request-header = "enable"
+debug.log-response-header = "enable"
+CONF_FILE
+fi
+
 # Check config file
 lighttpd -tt -f /etc/lighttpd/lighttpd.conf
 

Containers/fulltextsearch/Dockerfile

@@ -1,21 +1,19 @@
 # syntax=docker/dockerfile:latest
-# Probably from here https://github.com/elastic/elasticsearch/blob/main/distribution/docker/src/docker/Dockerfile
-FROM elasticsearch:8.19.14
+# Probably from here https://github.com/elastic/dockerfiles/blob/9.3/elasticsearch/Dockerfile
+FROM elasticsearch:9.4.0
 
 USER root
 
-ARG DEBIAN_FRONTEND=noninteractive
-
-# hadolint ignore=DL3008
+# hadolint ignore=DL3041
 RUN set -ex; \
     \
-    apt-get update; \
-    apt-get upgrade -y; \
-    apt-get install -y --no-install-recommends \
+    microdnf update -y; \
+    microdnf install -y --setopt=tsflags=nodocs \
         tzdata \
     ; \
-    rm -rf /var/lib/apt/lists/*;
+    microdnf clean all;
 
+COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
 USER 1000:0
@@ -30,3 +28,5 @@ LABEL com.centurylinklabs.watchtower.enable="false" \
     org.opencontainers.image.vendor="Nextcloud" \
     org.opencontainers.image.documentation="https://github.com/nextcloud/all-in-one/blob/main/readme.md"
 ENV ES_JAVA_OPTS="-Xms512M -Xmx512M"
+
+ENTRYPOINT ["/start.sh"]

Containers/fulltextsearch/healthcheck.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 curl -fs "http://127.0.0.1:9200/_cluster/health?filter_path=status" | grep -qE '"status":"(green|yellow)"' || exit 1

Containers/fulltextsearch/start.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+ELASTIC_LOG_LEVEL="$(echo "$AIO_LOG_LEVEL" | tr '[:lower:]' '[:upper:]')"
+
+exec env "logger.level=$ELASTIC_LOG_LEVEL" /usr/local/bin/docker-entrypoint.sh "$@"

Containers/imaginary/Dockerfile

@@ -1,7 +1,7 @@
 # syntax=docker/dockerfile:latest
 FROM golang:1.26.2-alpine3.23 AS go
 
-ENV IMAGINARY_HASH=6a274b488759a896aff02f52afee6e50b5e3a3ee
+ENV IMAGINARY_HASH=6a274b488759a896aff02f52afee6e50b5e3a3ee
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \
@@ -33,7 +33,8 @@ COPY --from=go /go/bin/imaginary /usr/local/bin/imaginary
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
-ENV PORT=9000
+ENV PORT=9000 \
+    AIO_LOG_LEVEL=warn
 
 USER 65534
 

Containers/imaginary/healthcheck.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 
-wget -q -O /dev/null "http://127.0.0.1:${PORT}/health" || exit 1
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+nc -z 127.0.0.1 "$PORT" || exit 1

Containers/imaginary/start.sh

@@ -1,5 +1,20 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+GOLANG_LOG="$(case "$AIO_LOG_LEVEL" in
+    debug) printf 'info' ;;
+    info) printf 'info' ;;
+    warn) printf 'warning' ;;
+    error) printf 'error' ;;
+esac)"
+export GOLANG_LOG
+if [ "$AIO_LOG_LEVEL" = "debug" ]; then
+    export DEBUG='*'
+fi
+
 echo "Imaginary has started"
 
 IMAGINARY_ARGS=(-return-size -max-allowed-resolution 222.2)
@@ -8,4 +23,4 @@ if [ -n "$IMAGINARY_SECRET" ]; then
     IMAGINARY_ARGS+=(-key "$IMAGINARY_SECRET")
 fi
 
-imaginary "${IMAGINARY_ARGS[@]}" "$@"
+exec imaginary "${IMAGINARY_ARGS[@]}" "$@"

Containers/mastercontainer/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:29.4.0-cli AS docker
+FROM docker:29.4.1-cli AS docker
 
 ARG CADDY_REMOTE_HOST_HASH=b21775afa730ffb52a24ddff310c8a6d1fd37276
 
@@ -56,14 +56,13 @@ RUN set -ex; \
     { \
         echo 'apc.shm_size=32M'; \
     } >> /usr/local/etc/php/conf.d/docker-php-ext-apcu.ini; \
-    docker-php-ext-install -j "$(nproc)" opcache; \
     { \
         echo 'opcache.enable=1'; \
         echo 'opcache.memory_consumption=32'; \
         echo 'opcache.interned_strings_buffer=8'; \
         echo 'opcache.max_accelerated_files=4000'; \
         echo 'opcache.validate_timestamps=0'; \
-    } >> /usr/local/etc/php/conf.d/docker-php-ext-opcache.ini; \
+    } > /usr/local/etc/php/conf.d/docker-php-ext-opcache.ini; \
     rm -r /tmp/pear; \
     runDeps="$( \
         scanelf --needed --nobanner --format '%n#p' --recursive /usr/local/lib/php/extensions \

Containers/mastercontainer/backup-time-file-watcher.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 restart_process() {
     echo "Restarting cron.sh because daily backup time was set, changed or unset."
     pkill cron.sh

Containers/mastercontainer/cron.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 while true; do
     if [ -f "/mnt/docker-aio-config/data/daily_backup_time" ]; then
         set -x
@@ -17,7 +21,9 @@ while true; do
         else
             export SEND_SUCCESS_NOTIFICATIONS=0
         fi
-        set +x
+        if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+            set +x
+        fi
         if [ -f "/mnt/docker-aio-config/data/daily_backup_running" ]; then
             export LOCK_FILE_PRESENT=1
         else

Containers/mastercontainer/daily-backup.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 echo "Daily backup script has started"
 
 # Check if initial configuration has been done, otherwise this script should do nothing.

Containers/mastercontainer/headers.Caddyfile

@@ -18,12 +18,12 @@ header {
     Referrer-Policy "no-referrer" # Tells the browser to never sent a Referer header. See https://developer.mozilla.org/de/docs/Web/HTTP/Reference/Headers/Referrer-Policy
     X-Robots-Tag "noindex, nofollow" # Tells web crawlers to not index this page. See https://developer.mozilla.org/de/docs/Web/HTTP/Reference/Headers/X-Robots-Tag
     Origin-Agent-Cluster "?1" # Isolates AIO from other same site pages. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Headers/Origin-Agent-Cluster
-    Cross-Origin-Opener-Policy "same-origin"; # AIO does not use any popup, still we can isolate its BCG if it is opened as a pop up by another page. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Headers/Cross-Origin-Opener-Policy
-    Cross-Origin-Embedder-Policy "require-corp"; # Harder rules for cross origin embeds. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Headers/Cross-Origin-Embedder-Policy
-    Cross-Origin-Resource-Policy "same-origin"; # Only allow the same origin to load resources. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Guides/Cross-Origin_Resource_Policy
+    Cross-Origin-Opener-Policy "same-origin" # AIO does not use any popup, still we can isolate its BCG if it is opened as a pop up by another page. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Headers/Cross-Origin-Opener-Policy
+    Cross-Origin-Embedder-Policy "require-corp" # Harder rules for cross origin embeds. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Headers/Cross-Origin-Embedder-Policy
+    Cross-Origin-Resource-Policy "same-origin" # Only allow the same origin to load resources. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Guides/Cross-Origin_Resource_Policy
 
     # Permissions-Policy disables browser features that AIO does not use. Since there is no "deny all" option, all known features need to be listed explicitly. See https://developer.mozilla.org/en-US/docs/Web/HTTP/Reference/Headers/Permissions-Policy
-    Permissions-Policy "accelerometer=(), ambient-light-sensor=(), aria-notify=(), attribution-reporting=(), autoplay=(), battery=(), bluetooth=(), browsing-topics=(), camera=(), captured-surface-control=(), ch-ua-high-entropy-values=(), compute-pressure=(), cross-origin-isolated=(), deferred-fetch=(), deferred-fetch-minimal=(), display-capture=(), document-domain=(), encrypted-media=(), execution-while-not-rendered=(), execution-while-out-of-viewport=(), fullscreen=(), gamepad=(), geolocation=(), gyroscope=(), hid=(), identity-credentials-get=(), idle-detection=(), language-detector=(), local-fonts=(), magnetometer=(), microphone=(), midi=(), on-device-speech-recognition=(), otp-credentials=(), payment=(), picture-in-picture=(), private-state-token-issuance=(), private-state-token-redemption=(), publickey-credentials-create=(), publickey-credentials-get=(), screen-wake-lock=(), serial=(), speaker-selection=(), storage-access=(), summarizer=(), translator=(), usb=(), web-share=(), window-management=(), xr-spatial-tracking=()"
+    Permissions-Policy "accelerometer=(), ambient-light-sensor=(), aria-notify=(), attribution-reporting=(), autoplay=(), bluetooth=(), browsing-topics=(), camera=(), captured-surface-control=(), ch-ua-high-entropy-values=(), compute-pressure=(), cross-origin-isolated=(), deferred-fetch=(), deferred-fetch-minimal=(), display-capture=(), encrypted-media=(), fullscreen=(), gamepad=(), geolocation=(), gyroscope=(), hid=(), identity-credentials-get=(), idle-detection=(), local-fonts=(), local-network=(), local-network-access=(), loopback-network=(), magnetometer=(), microphone=(), midi=(), on-device-speech-recognition=(), otp-credentials=(), payment=(), picture-in-picture=(), private-state-token-issuance=(), private-state-token-redemption=(), publickey-credentials-create=(), publickey-credentials-get=(), screen-wake-lock=(), serial=(), storage-access=(), summarizer=(), usb=(), web-share=(), window-management=(), xr-spatial-tracking=()"
 
     -Server
     -X-Powered-By

Containers/mastercontainer/healthcheck.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if [ -f "/mnt/docker-aio-config/data/configuration.json" ]; then
     nc -z 127.0.0.1 80 || exit 1
     nc -z 127.0.0.1 8080 || exit 1

Containers/mastercontainer/session-deduplicator.sh

@@ -16,6 +16,10 @@ compare_times() {
     fi
 }
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 while true; do
     compare_times
     sleep 2

Containers/mastercontainer/start.sh

@@ -20,6 +20,10 @@ case "${1}" in
 esac
 }
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Check if running as root user
 if [ "$EUID" != "0" ]; then
     print_red "Container does not run as root user. This is not supported."
@@ -333,6 +337,22 @@ else
     export NEXTCLOUD_DRI_GID=""
 fi
 
+# Log level logics
+if [ -n "$AIO_LOG_LEVEL" ] && ! echo "$AIO_LOG_LEVEL" | grep -q "^debug$\|^info$\|^warn$\|^error$"; then
+    print_red "AIO_LOG_LEVEL must be one of 'debug', 'info', 'warn' or 'error'.
+It is set to '$AIO_LOG_LEVEL'".
+    exit 1
+fi
+if [ -z "$AIO_LOG_LEVEL" ]; then
+    export AIO_LOG_LEVEL="warn"
+fi
+
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    export SUPERVISORD_STDOUT=/dev/stdout
+else
+    export SUPERVISORD_STDOUT=NONE
+fi
+
 # Check if ghcr.io is reachable
 # Solves issues like https://github.com/nextcloud/all-in-one/discussions/5268
 if ! curl --no-progress-meter https://ghcr.io/v2/ >/dev/null; then

Containers/mastercontainer/supervisord.conf

@@ -5,12 +5,12 @@ pidfile=/var/run/supervisord/supervisord.pid
 childlogdir=/var/log/supervisord/
 logfile_maxbytes=50MB                           
 logfile_backups=10                 
-loglevel=error
+loglevel=%(ENV_AIO_LOG_LEVEL)s
 user=root
 
 [program:php-fpm]
 # Stdout logging is disabled as otherwise the logs are spammed
-stdout_logfile=NONE
+stdout_logfile=%(ENV_SUPERVISORD_STDOUT)s
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
 command=php-fpm
@@ -58,7 +58,7 @@ user=root
 
 [program:domain-validator]
 # Logging is disabled as otherwise all attempts will be logged which spams the logs
-stdout_logfile=NONE
-stderr_logfile=NONE
+stdout_logfile=%(ENV_SUPERVISORD_STDOUT)s
+stderr_logfile=%(ENV_SUPERVISORD_STDOUT)s
 command=php -S 127.0.0.1:9876 /var/www/docker-aio/php/domain-validator.php
 user=www-data

Containers/nextcloud/Dockerfile

@@ -8,7 +8,7 @@ ENV SOURCE_LOCATION=/usr/src/nextcloud
 ENV REDIS_DB_INDEX=0
 
 # AIO settings start # Do not remove or change this line!
-ENV NEXTCLOUD_VERSION=33.0.2
+ENV NEXTCLOUD_VERSION=33.0.3
 ENV AIO_TOKEN=123456
 ENV AIO_URL=localhost
 # AIO settings end # Do not remove or change this line!
@@ -142,7 +142,7 @@ RUN set -ex; \
     \
     { \
         echo 'session.save_handler = redis'; \
-        echo 'session.save_path = "tcp://${REDIS_HOST}:${REDIS_PORT}?database=${REDIS_DB_INDEX}${REDIS_USER_AUTH}&auth[]=${REDIS_HOST_PASSWORD}"'; \
+        echo 'session.save_path = "tcp://${REDIS_HOST}:${REDIS_PORT}?database=${REDIS_DB_INDEX}${REDIS_USER_AUTH}&auth[]=${REDIS_HOST_PASSWORD}&timeout=3.0&read_timeout=10.0"'; \
         echo 'redis.session.locking_enabled = 1'; \
         echo 'redis.session.lock_retries = -1'; \
         echo '; 100ms in microseconds - prevents timeout on long requests such as large file uploads'; \
@@ -244,27 +244,27 @@ RUN set -ex; \
         imagemagick-tiff \
         coreutils; \
     \
-# Use dynamic pm mode: spare workers stay alive between requests so every request is served immediately
-# without waiting for a new process to spawn (unlike ondemand which forks on every request when idle).
-# pm.max_children: upper bound on worker processes; synced with max DB connections and MaxRequestWorkers.
-# Set high so users never hit an artificial limit under peak load — spare-server bounds keep idle memory usage low.
+    grep -q '^pm = dynamic' /usr/local/etc/php-fpm.d/www.conf; \
+    sed -i 's/^pm = dynamic/pm = ondemand/' /usr/local/etc/php-fpm.d/www.conf; \
+# Sync this with max db connections and MaxRequestWorkers
+# We don't actually expect so many children but don't want to limit it artificially because people will report issues otherwise.
+# Also children will usually be terminated again after the process is done due to the ondemand setting
     sed -i 's/^pm.max_children =.*/pm.max_children = 5000/' /usr/local/etc/php-fpm.d/www.conf; \
-# pm.start_servers: number of workers pre-forked at container startup.
-# Having 2 workers ready immediately means the first requests after boot are served without any spawn delay.
-    sed -i '/^;pm.start_servers/s/^;//' /usr/local/etc/php-fpm.d/www.conf; \
-    sed -i 's/^pm.start_servers =.*/pm.start_servers = 2/' /usr/local/etc/php-fpm.d/www.conf; \
-# pm.min_spare_servers: floor of idle workers kept alive at all times.
-# Guarantees at least 1 ready worker so a sudden burst of requests is handled without any fork wait.
-    sed -i '/^;pm.min_spare_servers/s/^;//' /usr/local/etc/php-fpm.d/www.conf; \
-    sed -i 's/^pm.min_spare_servers =.*/pm.min_spare_servers = 1/' /usr/local/etc/php-fpm.d/www.conf; \
-# pm.max_spare_servers: ceiling of idle workers kept alive during quiet periods.
-# Capping at 3 limits idle memory consumption while still keeping a small ready pool.
-    sed -i '/^;pm.max_spare_servers/s/^;//' /usr/local/etc/php-fpm.d/www.conf; \
-    sed -i 's/^pm.max_spare_servers =.*/pm.max_spare_servers = 3/' /usr/local/etc/php-fpm.d/www.conf; \
-# pm.max_requests: recycle each worker after handling 500 requests.
-# PHP extensions and apps can leak memory over time; recycling prevents those leaks from accumulating indefinitely.
-    sed -i '/^;pm.max_requests/s/^;//' /usr/local/etc/php-fpm.d/www.conf; \
-    sed -i 's/^pm.max_requests =.*/pm.max_requests = 500/' /usr/local/etc/php-fpm.d/www.conf; \
+# With pm = ondemand, workers are killed after pm.process_idle_timeout seconds
+# of inactivity.  The upstream default is 10 s, which is aggressive: after a
+# brief quiet period (e.g. desktop-sync clients polling every few seconds), all
+# workers are reaped and the next request burst must wait for fresh forks.  On
+# a loaded host that spawn latency can push Apache past its FastCGI timeout and
+# produce a 502.  300 s (5 min) keeps a warm pool through normal sync-client
+# polling cycles while still reclaiming memory during genuinely idle periods.
+    sed -i 's/^;*pm.process_idle_timeout\s*=.*/pm.process_idle_timeout = 300s/' /usr/local/etc/php-fpm.d/www.conf; \
+# Set request_terminate_timeout so that PHP-FPM forcibly kills workers that
+# exceed the wall-clock limit.  Without this (default = 0 = disabled) a worker
+# stuck on a slow DB query, a stalled Redis connection, or a hung syscall is
+# never reaped.  Over time these zombies fill up pm.max_children, leaving no
+# free slots for legitimate requests and causing Apache to return 502 Bad
+# Gateway upstream.
+    sed -i "s|^;*request_terminate_timeout = .*|request_terminate_timeout = \${PHP_MAX_TIME}|" /usr/local/etc/php-fpm.d/www.conf; \
     sed -i 's|access.log = /proc/self/fd/2|access.log = /proc/self/fd/1|' /usr/local/etc/php-fpm.d/docker.conf; \
     \
     echo "[ -n \"\$TERM\" ] && [ -f /root.motd ] && cat /root.motd" >> /root/.bashrc; \

Containers/nextcloud/config/apps.config.php

@@ -16,6 +16,12 @@ $CONFIG = array (
 if (getenv('APPS_ALLOWLIST')) {
     $CONFIG['appsallowlist'] = explode(" ", getenv('APPS_ALLOWLIST'));
 }
-if (getenv('NEXTCLOUD_APP_STORE_URL')) {
-    $CONFIG['appstoreurl'] = getenv('NEXTCLOUD_APP_STORE_URL');
+
+$appStoreUrl = getenv('NEXTCLOUD_APP_STORE_URL');
+if ($appStoreUrl) {
+    if ($appStoreUrl === 'no') {
+        $CONFIG['appstoreenabled '] = false;
+    } else {
+        $CONFIG['appstoreurl'] = getenv('NEXTCLOUD_APP_STORE_URL');
+    }
 }

Containers/nextcloud/config/redis.config.php

@@ -7,8 +7,8 @@ if (getenv('REDIS_MODE') !== 'rediscluster') {
 
   if (getenv('REDIS_HOST')) {
     $CONFIG['redis']['host'] = (string) getenv('REDIS_HOST');
-    $CONFIG['redis']['timeout'] = 1.5;
-    $CONFIG['redis']['read_timeout'] = 1.5;
+    $CONFIG['redis']['timeout'] = 3.0;
+    $CONFIG['redis']['read_timeout'] = 10.0;
   }
 
   if (getenv('REDIS_HOST_PASSWORD')) {
@@ -23,6 +23,10 @@ if (getenv('REDIS_MODE') !== 'rediscluster') {
     $CONFIG['redis']['dbindex'] = (int) getenv('REDIS_DB_INDEX');
   }
 
+  if (getenv('REDIS_PREFIX')) {
+    $CONFIG['redis']['memcache_customprefix'] = getenv('REDIS_PREFIX');
+  }
+
   if (getenv('REDIS_USER_AUTH')) {
     $CONFIG['redis']['user'] = str_replace("&auth[]=", "", getenv('REDIS_USER_AUTH'));
   }
@@ -60,6 +64,10 @@ if (getenv('REDIS_MODE') !== 'rediscluster') {
     $CONFIG['redis.cluster']['user'] = str_replace("&auth[]=", "", getenv('REDIS_USER_AUTH'));
   }
 
+  if (getenv('REDIS_PREFIX')) {
+    $CONFIG['redis.cluster']['memcache_customprefix'] = getenv('REDIS_PREFIX');
+  }
+
   if (getenv('NEXTCLOUD_TRUSTED_CERTIFICATES_REDIS')) {
     $CONFIG['redis.cluster']['ssl_context']['cafile'] = '/var/www/html/data/certificates/ca-bundle.crt';
   }

Containers/nextcloud/cron.sh

@@ -1,4 +1,9 @@
 #!/bin/bash
+
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 wait_for_cron() {
     set -x
     while [ -n "$(pgrep -f /var/www/html/cron.php)" ]; do

Containers/nextcloud/entrypoint.sh

@@ -10,6 +10,10 @@ directory_empty() {
     [ -z "$(ls -A "$1/")" ]
 }
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 run_upgrade_if_needed_due_to_app_update() {
     if php /var/www/html/occ status | grep maintenance | grep -q true; then
         php /var/www/html/occ maintenance:mode --off
@@ -20,6 +24,14 @@ run_upgrade_if_needed_due_to_app_update() {
     fi
 }
 
+NEXTCLOUD_LOG_LEVEL="$(case "$AIO_LOG_LEVEL" in
+    debug) printf '0' ;;
+    info) printf '1' ;;
+    warn) printf '2' ;;
+    error) printf '3' ;;
+esac)"
+export NEXTCLOUD_LOG_LEVEL
+
 # Create cert bundle
 if env | grep -q NEXTCLOUD_TRUSTED_CERTIFICATES_; then
 
@@ -75,7 +87,9 @@ if env | grep -q NEXTCLOUD_TRUSTED_CERTIFICATES_; then
     cat "$CERTIFICATE_BUNDLE"
 
     # Disable debug mode
-    set +x
+    if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+        set +x
+    fi
 fi
 
 # Adjust DATABASE_TYPE to by Nextcloud supported value
@@ -115,6 +129,11 @@ rm -f "$test_file"
 if [ -f /var/www/html/version.php ]; then
     # shellcheck disable=SC2016
     installed_version="$(php -r 'require "/var/www/html/version.php"; echo implode(".", $OC_Version);')"
+    if [ -z "$installed_version" ]; then
+        echo "Could not determine the installed Nextcloud version via php -r. The PHP installation might be broken."
+        echo "Please check the container logs and your PHP installation."
+        exit 1
+    fi
 else
     installed_version="0.0.0.0"
 fi
@@ -217,7 +236,9 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
                 if grep -q appstoreurl /var/www/html/config/config.php; then
                     set -x
                     APPSTORE_URL="$(grep appstoreurl /var/www/html/config/config.php | grep -oP 'https://.*v[0-9]+')"
-                    set +x
+                    if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+                        set +x
+                    fi
                 fi
                 # Default appstoreurl parameter in config.php defaults to 'https://apps.nextcloud.com/api/v1' so we check for the apps.json file stored in there
                 CURL_STATUS="$(curl -LI "$APPSTORE_URL"/apps.json -o /dev/null -w '%{http_code}\n' -s)"
@@ -284,7 +305,9 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
                     "$SOURCE_LOCATION/custom_apps/" \
                     /var/www/html/custom_apps/
             done
-            set +x
+            if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+                set +x
+            fi
         fi
 
         # Copy these from Nextcloud archive if they don't exist yet (i.e. new install)
@@ -437,12 +460,20 @@ EOF
             # Apply log settings
             echo "Applying default settings..."
             mkdir -p /var/www/html/data
-            php /var/www/html/occ config:system:set loglevel --value="2" --type=integer
-            php /var/www/html/occ config:system:set log_type --value="file"
-            php /var/www/html/occ config:system:set logfile --value="/var/www/html/data/nextcloud.log"
+            php /var/www/html/occ config:system:set loglevel --value="$NEXTCLOUD_LOG_LEVEL" --type=integer
+            if [ "$NEXTCLOUD_LOG_TYPE" = "errorlog" ]; then
+                php /var/www/html/occ config:system:set log_type --value="errorlog"
+                php /var/www/html/occ config:system:set log_type_audit --value="errorlog"
+                php /var/www/html/occ app:disable logreader
+            else
+                php /var/www/html/occ config:system:set log_type --value="file"
+                php /var/www/html/occ config:system:set log_type_audit --value="file"
+                php /var/www/html/occ app:enable logreader
+                php /var/www/html/occ config:system:set logfile --value="/var/www/html/data/nextcloud.log"
+                php /var/www/html/occ config:system:set logfile_audit --value="/var/www/html/data/audit.log"
+            fi
             php /var/www/html/occ config:system:set log_rotate_size --value="10485760" --type=integer
             php /var/www/html/occ app:enable admin_audit
-            php /var/www/html/occ config:app:set admin_audit logfile --value="/var/www/html/data/audit.log"
             php /var/www/html/occ config:system:set log.condition apps 0 --value="admin_audit"
 
             # Apply preview settings
@@ -640,8 +671,18 @@ fi
 # Adjusting log files to be stored on a volume
 echo "Adjusting log files..."
 php /var/www/html/occ config:system:set upgrade.cli-upgrade-link --value="https://github.com/nextcloud/all-in-one/discussions/2726"
-php /var/www/html/occ config:system:set logfile --value="/var/www/html/data/nextcloud.log"
-php /var/www/html/occ config:app:set admin_audit logfile --value="/var/www/html/data/audit.log"
+php /var/www/html/occ config:system:set loglevel --value="$NEXTCLOUD_LOG_LEVEL" --type=integer
+if [ "$NEXTCLOUD_LOG_TYPE" = "errorlog" ]; then
+    php /var/www/html/occ config:system:set log_type --value="errorlog"
+    php /var/www/html/occ config:system:set log_type_audit --value="errorlog"
+    php /var/www/html/occ app:disable logreader
+else
+    php /var/www/html/occ config:system:set log_type --value="file"
+    php /var/www/html/occ config:system:set log_type_audit --value="file"
+    php /var/www/html/occ app:enable logreader
+    php /var/www/html/occ config:system:set logfile --value="/var/www/html/data/nextcloud.log"
+    php /var/www/html/occ config:system:set logfile_audit --value="/var/www/html/data/audit.log"
+fi
 php /var/www/html/occ config:system:set updatedirectory --value="/nc-updater"
 if [ -n "$NEXTCLOUD_SKELETON_DIRECTORY" ]; then
     if [ "$NEXTCLOUD_SKELETON_DIRECTORY" = "empty" ]; then
@@ -742,7 +783,9 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
     if echo "$COLLABORA_HOST" | grep -q "nextcloud-.*-collabora"; then
         COLLABORA_HOST="$NC_DOMAIN"
     fi
-    set +x
+    if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+        set +x
+    fi
     # Remove richdcoumentscode if it should be incorrectly installed
     if [ -d "/var/www/html/custom_apps/richdocumentscode" ]; then
         php /var/www/html/occ app:remove richdocumentscode
@@ -863,7 +906,9 @@ if [ "$TALK_ENABLED" = 'yes' ]; then
     if [ -z "$TURN_DOMAIN" ]; then
         TURN_DOMAIN="$TALK_HOST"
     fi
-    set +x
+    if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+        set +x
+    fi
     if ! [ -d "/var/www/html/custom_apps/spreed" ]; then
         php /var/www/html/occ app:install spreed
     elif [ "$(php /var/www/html/occ config:app:get spreed enabled)" != "yes" ]; then

Containers/nextcloud/healthcheck.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Set a default value for POSTGRES_PORT
 if [ -z "$POSTGRES_PORT" ]; then
     POSTGRES_PORT=5432

Containers/nextcloud/notify-all.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if [[ "$EUID" = 0 ]]; then
     COMMAND=(sudo -E -u www-data php /var/www/html/occ)
 else

Containers/nextcloud/notify.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if [[ "$EUID" = 0 ]]; then
     COMMAND=(sudo -E -u www-data php /var/www/html/occ)
 else

Containers/nextcloud/run-exec-commands.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Wait until the apache container is ready
 while ! nc -z "$APACHE_HOST" "$APACHE_PORT"; do
     echo "Waiting for $APACHE_HOST to become available..."

Containers/nextcloud/start.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Set a default value for POSTGRES_PORT
 if [ -z "$POSTGRES_PORT" ]; then
     POSTGRES_PORT=5432
@@ -25,7 +29,7 @@ fi
 # Fix false database connection on old instances
 if [ -f "/var/www/html/config/config.php" ]; then
     sleep 2
-    while ! sudo -E -u www-data psql -d "postgresql://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB" -c "select now()"; do
+    while ! sudo -E -u www-data env PGPASSWORD="$POSTGRES_PASSWORD" psql -h "$POSTGRES_HOST" -p "$POSTGRES_PORT" -U "$POSTGRES_USER" -d "$POSTGRES_DB" -c "select now()"; do
         echo "Waiting for the database to start..."
         sleep 5
     done
@@ -53,7 +57,9 @@ if ! [ -f "/dev-dri-group-was-added" ] && [ -n "$(find /dev -maxdepth 1 -mindept
     usermod -aG "$GROUP" www-data
     touch "/dev-dri-group-was-added"
 fi
-set +x
+if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+    set +x
+fi
 
 # Check datadir permissions
 sudo -E -u www-data touch "$NEXTCLOUD_DATA_DIR/this-is-a-test-file" &>/dev/null
@@ -170,6 +176,8 @@ if [ "$THIS_IS_AIO" = "true" ] && [ "$APACHE_PORT" = 443 ]; then
     sed -i "/^listen.allowed_clients/s/,$//" /usr/local/etc/php-fpm.d/www.conf
     grep listen.allowed_clients /usr/local/etc/php-fpm.d/www.conf
 fi
-set +x
+if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+    set +x
+fi
 
 exec "$@"

Containers/nextcloud/supervisord.conf

@@ -6,7 +6,7 @@ pidfile=/var/run/supervisord/supervisord.pid
 childlogdir=/var/log/supervisord/
 logfile_maxbytes=50MB                           ; maximum size of logfile before rotation
 logfile_backups=10                              ; number of backed up logfiles
-loglevel=error
+loglevel=%(ENV_AIO_LOG_LEVEL)s
 user=root
 
 [program:php-fpm]
@@ -25,6 +25,14 @@ stderr_logfile_maxbytes=0
 command=/cron.sh
 user=www-data
 
+[program:taskprocessing-worker]
+stdout_logfile=/dev/stdout
+stdout_logfile_maxbytes=0
+stderr_logfile=/dev/stderr
+stderr_logfile_maxbytes=0
+command=php /var/www/html/occ taskprocessing:worker --timeout 300
+user=www-data
+
 [program:run-exec-commands]
 stdout_logfile=/dev/stdout
 stdout_logfile_maxbytes=0

Containers/notify-push/healthcheck.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 if ! nc -z "$NEXTCLOUD_HOST" 9001; then
     exit 0
 fi

Containers/notify-push/start.sh

@@ -1,5 +1,11 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+export RUST_LOG="$AIO_LOG_LEVEL"
+
 if [ -z "$NEXTCLOUD_HOST" ]; then
     echo "NEXTCLOUD_HOST needs to be provided. Exiting!"
     exit 1
@@ -39,8 +45,6 @@ fi
 echo "notify-push was started"
 
 # Run it
-/var/www/html/custom_apps/notify_push/bin/"$CPU_ARCH"/notify_push \
+exec /var/www/html/custom_apps/notify_push/bin/"$CPU_ARCH"/notify_push \
     --port 7867 \
     /var/www/html/config/config.php
-
-exec "$@"

Containers/onlyoffice/healthcheck.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 nc -z 127.0.0.1 80 || exit 1

Containers/postgresql/Dockerfile

@@ -14,6 +14,7 @@ RUN set -ex; \
         bash \
         openssl \
         shadow \
+        netcat-openbsd \
         grep; \
     \
 # We need to use the same gid and uid as on old installations

Containers/postgresql/healthcheck.sh

@@ -1,7 +1,14 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 test -f "/mnt/data/backup-is-running" && exit 0
 
-psql -d "postgresql://oc_$POSTGRES_USER:$POSTGRES_PASSWORD@127.0.0.1:11000/$POSTGRES_DB" -c "select now()" && exit 0
+# If database import is running, do not continue with the health check
+if nc -z 127.0.0.1 11000; then
+    exit 0
+fi
 
-psql -d "postgresql://oc_$POSTGRES_USER:$POSTGRES_PASSWORD@127.0.0.1:5432/$POSTGRES_DB" -c "select now()" || exit 1
+PGPASSWORD="$POSTGRES_PASSWORD" psql -h 127.0.0.1 -p 5432 -U "oc_$POSTGRES_USER" -d "$POSTGRES_DB" -c "select now()" || exit 1

Containers/postgresql/init-user-db.sh

@@ -1,10 +1,16 @@
 #!/bin/bash
+
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 set -ex
 
 touch "$DUMP_DIR/initialization.failed"
 
-psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" --dbname "$POSTGRES_DB" <<-EOSQL
-	CREATE USER "oc_$POSTGRES_USER" WITH PASSWORD '$POSTGRES_PASSWORD' CREATEDB;
+psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" --dbname "$POSTGRES_DB" \
+	-v "pg_new_password=$POSTGRES_PASSWORD" <<-EOSQL
+	CREATE USER "oc_$POSTGRES_USER" WITH PASSWORD :'pg_new_password' CREATEDB;
 	ALTER DATABASE "$POSTGRES_DB" OWNER TO "oc_$POSTGRES_USER";
 	GRANT ALL PRIVILEGES ON DATABASE "$POSTGRES_DB" TO "oc_$POSTGRES_USER";
 	GRANT ALL PRIVILEGES ON SCHEMA public TO "oc_$POSTGRES_USER";

Containers/postgresql/start.sh

@@ -1,5 +1,17 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+POSTGRES_LOG_MIN_MESSAGES="$(case "$AIO_LOG_LEVEL" in
+    debug) printf 'debug1' ;;
+    info) printf 'info' ;;
+    warn) printf 'warning' ;;
+    error) printf 'error' ;;
+esac)"
+export POSTGRES_LOG_MIN_MESSAGES
+
 # Variables
 DATADIR="/var/lib/postgresql/data"
 export DUMP_DIR="/mnt/data"
@@ -85,7 +97,7 @@ if ( [ -f "$DATADIR/PG_VERSION" ] && [ "$PG_MAJOR" != "$(cat "$DATADIR/PG_VERSIO
     exec docker-entrypoint.sh postgres &
 
     # Wait for creation
-    while ! psql -d "postgresql://oc_$POSTGRES_USER:$POSTGRES_PASSWORD@127.0.0.1:11000/$POSTGRES_DB" -c "select now()"; do
+    while ! psql -h 127.0.0.1 -p 11000 -U "oc_$POSTGRES_USER" -d "$POSTGRES_DB" -c "select now()"; do
         echo "Waiting for the database to start."
         sleep 5
     done
@@ -107,8 +119,9 @@ if ( [ -f "$DATADIR/PG_VERSION" ] && [ "$PG_MAJOR" != "$(cat "$DATADIR/PG_VERSIO
         exit 1
     elif [ "$DB_OWNER" != "oc_$POSTGRES_USER" ]; then
         DIFFERENT_DB_OWNER=1
-        psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" --dbname "$POSTGRES_DB" <<-EOSQL
-            CREATE USER "$DB_OWNER" WITH PASSWORD '$POSTGRES_PASSWORD' CREATEDB;
+        psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" --dbname "$POSTGRES_DB" \
+            -v "pg_new_password=$POSTGRES_PASSWORD" <<-EOSQL
+            CREATE USER "$DB_OWNER" WITH PASSWORD :'pg_new_password' CREATEDB;
             ALTER DATABASE "$POSTGRES_DB" OWNER TO "$DB_OWNER";
             GRANT ALL PRIVILEGES ON DATABASE "$POSTGRES_DB" TO "$DB_OWNER";
             GRANT ALL PRIVILEGES ON SCHEMA public TO "$DB_OWNER";
@@ -165,6 +178,12 @@ if [ -f "/var/lib/postgresql/data/postgresql.conf" ]; then
         sed -i 's|#log_checkpoints.*|log_checkpoints = off|' "$PGCONF"
     fi
 
+    if grep -q "^#\?log_min_messages" /var/lib/postgresql/data/postgresql.conf; then
+        sed -i "s|^#\?log_min_messages.*|log_min_messages = $POSTGRES_LOG_MIN_MESSAGES|" /var/lib/postgresql/data/postgresql.conf
+    else
+        echo "log_min_messages = $POSTGRES_LOG_MIN_MESSAGES" >> /var/lib/postgresql/data/postgresql.conf
+    fi
+
     # Closing idling connections automatically seems to break any logic so was reverted again to default where it is disabled
     if grep -q "^idle_session_timeout" "$PGCONF"; then
         sed -i 's|^idle_session_timeout.*|#idle_session_timeout|' "$PGCONF"
@@ -222,12 +241,16 @@ do_database_dump() {
         pg_ctl stop -m fast
         rm "$DUMP_DIR/export.failed"
         echo 'Database dump successful!'
-        set +x
+        if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+            set +x
+        fi
         exit 0
     else
         pg_ctl stop -m fast
         echo "Database dump unsuccessful!"
-        set +x
+        if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+            set +x
+        fi
         exit 1
     fi
 }

Containers/redis/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From https://github.com/redis/docker-library-redis/blob/release/8.2/alpine/Dockerfile
-FROM redis:8.6.2-alpine
+FROM redis:8.6.3-alpine
 
 COPY --chmod=775 start.sh /start.sh
 

Containers/redis/healthcheck.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 redis-cli -a "$REDIS_HOST_PASSWORD" PING || exit 1

Containers/redis/start.sh

@@ -1,5 +1,19 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+# Redis only supports [debug, verbose, notice, warning, nothing] as log level
+if [ "$AIO_LOG_LEVEL" = "warn" ] || [ "$AIO_LOG_LEVEL" = "error" ]; then
+    REDIS_LOG_LEVEL="warning"
+elif [ "$AIO_LOG_LEVEL" = "info" ]; then
+    REDIS_LOG_LEVEL="notice"
+else
+    REDIS_LOG_LEVEL="$AIO_LOG_LEVEL"
+fi
+export REDIS_LOG_LEVEL
+
 # Show wiki if vm.overcommit is disabled
 if [ "$(sysctl -n vm.overcommit_memory)" != "1" ]; then
     echo "Memory overcommit is disabled but necessary for safe operation"
@@ -16,7 +30,7 @@ fi
 
 # Build the redis-server argument list.
 REDIS_ARGS=(
-    --loglevel warning
+    --loglevel "$REDIS_LOG_LEVEL"
     --save "" # Disable RDB persistence (Redis is used as a pure cache/lock store)
     --maxmemory-policy allkeys-lru # Evict least-recently-used keys when memory is full
     --lazyfree-lazy-eviction yes # Perform evictions in a background thread

Containers/talk-recording/Dockerfile

@@ -4,12 +4,13 @@ FROM python:3.14.3-alpine3.23
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
-ENV RECORDING_VERSION=v0.2.1
-ENV ALLOW_ALL=false
-ENV HPB_PROTOCOL=https
-ENV NC_PROTOCOL=https
-ENV SKIP_VERIFY=false
-ENV HPB_PATH=/standalone-signaling/
+ENV RECORDING_VERSION=v0.2.1 \
+    ALLOW_ALL=false \
+    HPB_PROTOCOL=https \
+    NC_PROTOCOL=https \
+    SKIP_VERIFY=false \
+    HPB_PATH=/standalone-signaling/ \
+    AIO_LOG_LEVEL=warn
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \

Containers/talk-recording/healthcheck.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 nc -z 127.0.0.1 1234 || exit 1

Containers/talk-recording/start.sh

@@ -1,5 +1,17 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+TALK_RECORDING_LOG_LEVEL="$(case "$AIO_LOG_LEVEL" in
+    debug) printf '10' ;;
+    info) printf '20' ;;
+    warn) printf '30' ;;
+    error) printf '40' ;;
+esac)"
+export TALK_RECORDING_LOG_LEVEL
+
 # Variables
 if [ -z "$NC_DOMAIN" ]; then
     echo "You need to provide the NC_DOMAIN."
@@ -49,7 +61,7 @@ fi
 cat << RECORDING_CONF > "/conf/recording.conf"
 [logs]
 # 30 means Warning
-level = 30
+level = ${TALK_RECORDING_LOG_LEVEL}
 
 [http]
 listen = 0.0.0.0:1234

Containers/talk/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM nats:2.12.7-scratch AS nats
+FROM nats:2.14.0-scratch AS nats
 FROM eturnal/eturnal:1.12.2-alpine AS eturnal
 FROM strukturag/nextcloud-spreed-signaling:2.1.1 AS signaling
 FROM alpine:3.23.4 AS janus
@@ -37,7 +37,8 @@ RUN set -ex; \
 
 FROM alpine:3.23.4
 ENV ETURNAL_ETC_DIR="/conf"
-ENV SKIP_CERT_VERIFY=false
+ENV SKIP_CERT_VERIFY=false \
+    AIO_LOG_LEVEL=warn
 COPY --from=janus     --chmod=777 --chown=1000:1000 /usr/local                          /usr/local
 COPY --from=eturnal   --chmod=777 --chown=1000:1000 /opt/eturnal                        /opt/eturnal
 COPY --from=nats      --chmod=777 --chown=1000:1000 /nats-server                        /usr/local/bin/nats-server

Containers/talk/healthcheck.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 nc -z 127.0.0.1 8081 || exit 1
 nc -z 127.0.0.1 8188 || exit 1
 nc -z 127.0.0.1 4222 || exit 1

Containers/talk/start.sh

@@ -1,5 +1,23 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+if [ "$AIO_LOG_LEVEL" = "warn" ]; then
+    ETURNAL_LOG_LEVEL="warning"
+else
+    ETURNAL_LOG_LEVEL="$AIO_LOG_LEVEL"
+fi
+export ETURNAL_LOG_LEVEL
+JANUS_LOG_LEVEL="$(case "$AIO_LOG_LEVEL" in
+    debug) printf '7' ;;
+    info) printf '4' ;;
+    warn) printf '3' ;;
+    error) printf '1' ;;
+esac)"
+export JANUS_LOG_LEVEL
+
 # Variables
 if [ -z "$NC_DOMAIN" ]; then
     echo "You need to provide the NC_DOMAIN."
@@ -31,7 +49,9 @@ if mountpoint -q /usr/local/share/ca-certificates; then
         fi
     done
     export SSL_CERT_FILE=/tmp/ca-certificates.crt
-    set +x
+    if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+        set +x
+    fi
 fi
 
 set -x
@@ -40,7 +60,9 @@ IPv4_ADDRESS_TALK_RELAY="$(hostname -i | grep -oP '[0-9]+\.[0-9]+\.[0-9]+\.[0-9]
 IPv4_ADDRESS_TALK="$(dig "$TALK_HOST" IN A +short +search | grep '^[0-9.]\+$' | sort | head -n1)"
 # shellcheck disable=SC2153
 IPv6_ADDRESS_TALK="$(dig "$TALK_HOST" AAAA +short +search | grep '^[0-9a-f:]\+$' | sort | head -n1)"
-set +x
+if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+    set +x
+fi
 
 if [ -n "$IPv4_ADDRESS_TALK" ] && [ "$IPv4_ADDRESS_TALK_RELAY" = "$IPv4_ADDRESS_TALK" ]; then
     IPv4_ADDRESS_TALK=""
@@ -53,7 +75,9 @@ if grep -q "1" /sys/module/ipv6/parameters/disable \
 || grep -q "1" /proc/sys/net/ipv6/conf/default/disable_ipv6; then
     IP_BINDING="0.0.0.0"
 fi
-set +x
+if [ "$AIO_LOG_LEVEL" != 'debug' ]; then
+    set +x
+fi
 
 # Turn
 cat << TURN_CONF > "/conf/eturnal.yml"
@@ -66,7 +90,7 @@ eturnal:
       port: $TALK_PORT
       transport: tcp
   log_dir: stdout
-  log_level: warning
+  log_level: ${ETURNAL_LOG_LEVEL}
   secret: "$TURN_SECRET"
   relay_ipv4_addr: "$IPv4_ADDRESS_TALK_RELAY"
   relay_ipv6_addr: "$IPv6_ADDRESS_TALK"

Containers/talk/supervisord.conf

@@ -5,7 +5,7 @@ pidfile=/var/run/supervisord/supervisord.pid
 childlogdir=/var/log/supervisord/
 logfile_maxbytes=50MB                           
 logfile_backups=10                              
-loglevel=error
+loglevel=%(ENV_AIO_LOG_LEVEL)s
 
 [program:nats-server]
 stdout_logfile=/dev/stdout
@@ -30,8 +30,7 @@ stdout_logfile=/dev/stdout
 stdout_logfile_maxbytes=0
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
-# debug-level 3 means warning
-command=janus --config=/conf/janus.jcfg --disable-colors --log-stdout --full-trickle --debug-level 3
+command=janus --config=/conf/janus.jcfg --disable-colors --log-stdout --full-trickle --debug-level %(ENV_JANUS_LOG_LEVEL)s
 # Start alongside eturnal; signaling connects to Janus via WebSocket
 priority=20
 

Containers/watchtower/start.sh

@@ -1,5 +1,9 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 # Check if socket is available and readable
 if ! [ -e "/var/run/docker.sock" ]; then
     echo "Docker socket is not available. Cannot continue."
@@ -17,7 +21,7 @@ if [ -f /run/.containerenv ]; then
 fi
 
 if [ -n "$CONTAINER_TO_UPDATE" ]; then
-    exec /watchtower --cleanup --debug --run-once "$CONTAINER_TO_UPDATE"
+    exec /watchtower --cleanup --log-level "$AIO_LOG_LEVEL" --run-once "$CONTAINER_TO_UPDATE"
 else
     echo "'CONTAINER_TO_UPDATE' is not set. Cannot update anything."
     exit 1

Containers/whiteboard/healthcheck.sh

@@ -1,4 +1,8 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
 nc -z "$REDIS_HOST" "$REDIS_PORT" || exit 0
 nc -z 127.0.0.1 3002 || exit 1

Containers/whiteboard/start.sh

@@ -1,5 +1,11 @@
 #!/bin/bash
 
+if [ "$AIO_LOG_LEVEL" = 'debug' ]; then
+    set -x
+fi
+
+export LOG_LEVEL="$AIO_LOG_LEVEL"
+
 # Only start container if nextcloud is accessible
 while ! nc -z "$REDIS_HOST" "$REDIS_PORT"; do
     echo "Waiting for redis to start..."

community-containers/local-ai/readme.md

@@ -5,7 +5,6 @@ This container bundles Local AI and auto-configures it for you. It support hardw
 Documentation is available on the container repository. This documentation is regularly updated and is intended to be as simple and detailed as possible. Thanks for all your feedback!
 
 - See https://github.com/docjyJ/aio-local-ai-vulkan#getting-started for getting start with this container.
-- See [this guide](https://github.com/nextcloud/all-in-one/discussions/5430) for how to improve AI task pickup speed
 - Note that Nextcloud supports only one server for AI queries, so this container cannot be used at the same time as other AI containers.
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 

community-containers/readme.md

@@ -4,9 +4,65 @@ This directory features containers that are built for AIO which allows to add ad
 ## Disclaimers
 All containers that are in this directory are community maintained so the responsibility is on the community to keep them updated and secure. There is no guarantee that this will be the case in the future.
 
+## Overview
+
+```mermaid
+flowchart TD
+    %% ── Styles ───────────────────────────────────────────────────────────────────
+    classDef community fill:#FDEBD0,stroke:#E67E22,color:#222
+    classDef group     fill:#FEF9E7,stroke:#F39C12,color:#333
+
+    subgraph COMM_AI["🤖 AI & Language"]
+        LAI(["🧠  Local AI\nPrivate AI assistant"]):::community
+        LT(["✏️  LanguageTool\nSpell & grammar check"]):::community
+        LTRANS(["🌐  LibreTranslate\nTranslation engine"]):::community
+        FACE(["🙂  FaceRecognition\nPhoto AI processor"]):::community
+    end
+
+    subgraph COMM_BACKUP["💾 Backup & Storage"]
+        BV(["📦  Borgbackup Viewer\nBrowse backups"]):::community
+        CALB(["📅  CalCardBackup\nCalendar/Contacts backup"]):::community
+        MINIO(["🗃️  MinIO\nS3-compatible storage"]):::community
+        SMB(["📂  SMB Server\nWindows file sharing"]):::community
+    end
+
+    subgraph COMM_EXTRA["🌟 Extra Services"]
+        HA(["🏠  Home Assistant\nHome automation"]):::community
+        STLW(["📧  Stalwart\nMail server"]):::community
+        NOCO(["🗂️  NocoDB\nNo-code database"]):::community
+        JSER(["🎯  Jellyseerr\nMedia request manager"]):::community
+        NOTIF(["📣  Notifications\nExternal push notify"]):::community
+    end
+
+    subgraph COMM_MEDIA["🎬 Media"]
+        PLEX(["🎞️  Plex\nMedia Server"]):::community
+        JELLY(["🎬  Jellyfin\nMedia Server"]):::community
+        DLNA(["📡  DLNA\nMedia Streaming"]):::community
+        MEMTR(["📸  Memories\nVideo Transcoder"]):::community
+        MKV(["💿  MakeMKV\nBlu-ray / DVD rip"]):::community
+    end
+
+    subgraph COMM_MONITOR["📊 Monitoring & Infra"]
+        GLAN(["📈  Glances\nSystem monitoring"]):::community
+        EXP(["📊  Nextcloud Exporter\nPrometheus metrics"]):::community
+        SCRU(["💽  Scrutiny\nDisk health (S.M.A.R.T.)"]):::community
+        CMGMT(["🐳  Container Mgmt\nDocker web console"]):::community
+    end
+
+    subgraph COMM_SEC["🔒 Security & Network"]
+        F2B(["🚫  Fail2ban\nBrute-force protection"]):::community
+        PIH(["🕳️  Pi-hole\nAd & DNS blocker"]):::community
+        VW(["🔐  Vaultwarden\nPassword Manager"]):::community
+        LDAP(["👥  LLDAP\nLight LDAP / Users"]):::community
+        CADDY(["🌐  Caddy\nReverse Proxy + Geoblocking"]):::community
+        NPMPLUS(["🌐  NPMplus\nNginx Proxy Manager"]):::community
+    end
+```
+
 ## How to use this?
 Starting with v11 of AIO, the management of Community Containers is done via the AIO interface (it is the last section in the AIO interface, so only visible if you scroll down). 
-⚠️⚠️⚠️ Please review the folder for documentation on each of the containers before adding them! Not reviewing the documentation for each of them first might break starting the AIO containers because e.g. fail2ban only works on Linux and not on Docker Desktop! **Hint:** If the containers where running already, in order to actually start the added container, you need to click on `Stop containers` and the `Update and start containers` in order to actually start it.
+
+⚠️⚠️⚠️ Please review the folder for documentation on each of the containers before adding them! Not reviewing the documentation for each of them first might break starting the AIO containers because some containers are not compatible with each other and more.
 
 ## How to add containers?
 Simply submit a PR by creating a new folder in this directory: https://github.com/nextcloud/all-in-one/tree/main/community-containers with the name of your container. It must include a json file with the same name and with correct syntax and a readme.md with additional information. You might get inspired by caddy, fail2ban, local-ai, libretranslate, plex, pi-hole or vaultwarden (subfolders in this directory). For a full-blown example of the json file, see https://github.com/nextcloud/all-in-one/blob/main/php/containers.json. The json-schema that it validates against can be found here: https://github.com/nextcloud/all-in-one/blob/main/php/containers-schema.json.

compose.yaml

@@ -22,6 +22,7 @@ services:
       # APACHE_IP_BINDING: 127.0.0.1 # Should be set when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) that is running on the same host. See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
       # APACHE_ADDITIONAL_NETWORK: frontend_net # (Optional) Connect the apache container to an additional docker network. Needed when behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) running in a different docker network on same server. See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
       # BORG_RETENTION_POLICY: --keep-within=7d --keep-weekly=4 --keep-monthly=6 # Allows to adjust borgs retention policy. See https://github.com/nextcloud/all-in-one#how-to-adjust-borgs-retention-policy
+      # AIO_LOG_LEVEL: warn # Allows to globally adjust the log level of the included AIO components. Supported values: debug, info, warn, error. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-log-level-for-aio-components
       # COLLABORA_SECCOMP_DISABLED: false # Setting this to true allows to disable Collabora's Seccomp feature. See https://github.com/nextcloud/all-in-one#how-to-disable-collaboras-seccomp-feature
       # DOCKER_API_VERSION: 1.44 # You can adjust the internally used docker api version with this variable. ⚠️⚠️⚠️ Warning: please note that only the default api version (unset this variable) is supported and tested by the maintainers of Nextcloud AIO. So use this on your own risk and things might break without warning. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-internally-used-docker-api-version
       # FULLTEXTSEARCH_JAVA_OPTIONS: "-Xms1024M -Xmx1024M" # Allows to adjust the fulltextsearch java options. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-fulltextsearch-java-options

local-instance.md

@@ -3,15 +3,23 @@ It is possible due to several reasons that you do not want or cannot open Nextcl
 
 ### Content
 - [1. Tailscale](#1-tailscale)
-- [2. The normal way](#2-the-normal-way)
-- [3. Use the ACME DNS-challenge](#3-use-the-acme-dns-challenge)
-- [4. Use Cloudflare](#4-use-cloudflare)
-- [5. Buy a certificate and use that](#5-buy-a-certificate-and-use-that)
+- [2. Pangolin](#2-pangolin)
+- [3. The normal way](#3-the-normal-way)
+- [4. Use the ACME DNS-challenge](#4-use-the-acme-dns-challenge)
+- [5. Use Cloudflare](#5-use-cloudflare)
+- [6. Buy a certificate and use that](#6-buy-a-certificate-and-use-that)
 
 ## 1. Tailscale
 This is the recommended way. For a reverse proxy example guide for Tailscale, see this guide by [@Perseus333](https://github.com/Perseus333): https://github.com/nextcloud/all-in-one/discussions/6817
 
-## 2. The normal way
+## 2. Pangolin
+[Pangolin](https://pangolin.net/) is an open-source, WireGuard-based remote access platform similar in concept to Tailscale. It uses the **Newt** connector to create outbound-only encrypted tunnels — no inbound ports need to be opened on your firewall. Pangolin handles TLS automatically, providing a valid certificate for your Nextcloud domain.
+
+You can use either [Pangolin Cloud](https://app.pangolin.net/) (free tier available) or [self-host your own Pangolin server](https://docs.pangolin.net/self-host/quick-install) on a VPS. For private/local-only access, self-hosting Pangolin on a machine within your local network means that Nextcloud never needs to be exposed to the public internet.
+
+For the reverse proxy configuration details and a step-by-step setup guide, see the [Pangolin section in the reverse proxy documentation](./reverse-proxy.md#pangolin).
+
+## 3. The normal way
 The normal way is the following:
 1. Set up your domain correctly to point to your home network
 1. Set up a reverse proxy by following the [reverse proxy documentation](./reverse-proxy.md) but only open port 80 (which is needed for the ACME challenge to work - however no real traffic will use this port).
@@ -21,12 +29,12 @@ The normal way is the following:
 
 **Hint:** You may have a look at [this video](https://youtu.be/zk-y2wVkY4c) for a more complete but possibly outdated example.
 
-## 3. Use the ACME DNS-challenge
+## 4. Use the ACME DNS-challenge
 You can alternatively use the ACME DNS-challenge to get a valid certificate for Nextcloud. Here is described how to set it up using an external caddy reverse proxy: https://github.com/nextcloud/all-in-one#how-to-get-nextcloud-running-using-the-acme-dns-challenge
 
-## 4. Use Cloudflare
+## 5. Use Cloudflare
 If you do not have any control over the network, you may think about using Cloudflare Tunnel to get a valid certificate for your Nextcloud. However it will be opened to the public internet then. See https://github.com/nextcloud/all-in-one#how-to-run-nextcloud-behind-a-cloudflare-tunnel how to set this up.
 
-## 5. Buy a certificate and use that
+## 6. Buy a certificate and use that
 If none of the above ways work for you, you may simply buy a certificate from an issuer for your domain. You then download the certificate onto your server, configure AIO in [reverse proxy mode](./reverse-proxy.md) and use the certificate for your domain in your reverse proxy config.
 

manual-install/latest.yml

@@ -186,6 +186,7 @@ services:
       - WHITEBOARD_ENABLED
     stop_grace_period: 600s
     restart: unless-stopped
+    shm_size: 134217728
     cap_drop:
       - NET_RAW
 

manual-install/sample.conf

@@ -25,6 +25,7 @@ APACHE_IP_BINDING=0.0.0.0          # This can be changed to e.g. 127.0.0.1 if yo
 APACHE_MAX_SIZE=17179869184          # This needs to be an integer and in sync with NEXTCLOUD_UPLOAD_LIMIT
 APACHE_PORT=443          # Changing this to a different value than 443 will allow you to run it behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else).
 ADDITIONAL_COLLABORA_OPTIONS=['--o:security.seccomp=true']          # You can add additional collabora options here by using the array syntax.
+AIO_LOG_LEVEL=warn          # Allows to adjust the global AIO log level. Valid values are debug, info, warn and error.
 COLLABORA_DICTIONARIES="de_DE en_GB en_US es_ES fr_FR it nl pt_BR pt_PT ru"        # You can change this in order to enable other dictionaries for collabora
 FULLTEXTSEARCH_JAVA_OPTIONS="-Xms512M -Xmx512M"          # Allows to adjust the fulltextsearch java options.
 INSTALL_LATEST_MAJOR=no        # Setting this to yes will install the latest Major Nextcloud version upon the first installation
@@ -34,7 +35,7 @@ NEXTCLOUD_DATADIR=nextcloud_aio_nextcloud_data          # You can change this to
 NEXTCLOUD_MAX_TIME=3600          # This allows to change the upload time limit of the Nextcloud container
 NEXTCLOUD_MEMORY_LIMIT=512M          # This allows to change the PHP memory limit of the Nextcloud container
 NEXTCLOUD_MOUNT=/mnt/          # This allows the Nextcloud container to access directories on the host. It must never be equal to the value of NEXTCLOUD_DATADIR!
-NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts notes"        # Allows to modify the Nextcloud apps that are installed on starting AIO the first time
+NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts notes"        # Allows to modify the Nextcloud apps that are installed on starting AIO the first time. You can also disable apps by using a hyphen in front of them. E.g. "-app_api"
 NEXTCLOUD_TRUSTED_CACERTS_DIR=/usr/local/share/ca-certificates/my-custom-ca          # Nextcloud container will trust all the Certification Authorities, whose certificates are included in the given directory.
 NEXTCLOUD_UPLOAD_LIMIT=16G          # This allows to change the upload limit of the Nextcloud container
 REMOVE_DISABLED_APPS=yes        # Setting this to no keep Nextcloud apps that are disabled via their switch and not uninstall them if they should be installed in Nextcloud.

manual-install/update-yaml.sh

@@ -100,8 +100,9 @@ sed -i 's|NC_DOMAIN=|NC_DOMAIN=yourdomain.com          # TODO! Needs to be chang
 sed -i 's|NEXTCLOUD_PASSWORD=|NEXTCLOUD_PASSWORD=          # TODO! This is the password of the initially created Nextcloud admin with username "admin".|' sample.conf
 sed -i 's|TIMEZONE=|TIMEZONE=Europe/Berlin          # TODO! This is the timezone that your containers will use.|' sample.conf
 sed -i 's|COLLABORA_SECCOMP_POLICY=|COLLABORA_SECCOMP_POLICY=--o:security.seccomp=true          # Changing the value to false allows to disable the seccomp feature of the Collabora container.|' sample.conf
+sed -i 's|AIO_LOG_LEVEL=|AIO_LOG_LEVEL=warn          # Allows to adjust the global AIO log level. Valid values are debug, info, warn and error.|' sample.conf
 sed -i 's|FULLTEXTSEARCH_JAVA_OPTIONS=|FULLTEXTSEARCH_JAVA_OPTIONS="-Xms512M -Xmx512M"          # Allows to adjust the fulltextsearch java options.|' sample.conf
-sed -i 's|NEXTCLOUD_STARTUP_APPS=|NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts notes"        # Allows to modify the Nextcloud apps that are installed on starting AIO the first time|' sample.conf
+sed -i 's|NEXTCLOUD_STARTUP_APPS=|NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts notes"        # Allows to modify the Nextcloud apps that are installed on starting AIO the first time. You can also disable apps by using a hyphen in front of them. E.g. "-app_api"|' sample.conf
 sed -i 's|NEXTCLOUD_ADDITIONAL_APKS=|NEXTCLOUD_ADDITIONAL_APKS=imagemagick        # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value.|' sample.conf
 sed -i 's|NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=|NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=imagick        # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value.|' sample.conf
 sed -i 's|INSTALL_LATEST_MAJOR=|INSTALL_LATEST_MAJOR=no        # Setting this to yes will install the latest Major Nextcloud version upon the first installation|' sample.conf

migration.md

@@ -3,7 +3,7 @@
 There are basically three ways how to migrate from an already existing Nextcloud installation to Nextcloud AIO (if you ran AIO on the former installation already, you can follow [these steps](https://github.com/nextcloud/all-in-one#how-to-migrate-from-aio-to-aio)):
 
 1. Migrate only the files which is the easiest way (this excludes all calendar data for example)
-1. Migrate the files and the database which is much more complicated (and doesn't work on former snap installations)
+1. Migrate the files and the database which is much more complicated (with special handling required for former snap installations, see [below](#migrating-from-a-snap-installation))
 1. Use the user_migration app that allows to migrate some of the user's data from a former instance to a new instance but needs to be done manually for each user
 
 ## Migrate only the files 
@@ -21,7 +21,7 @@ The procedure for migrating only the files works like this:
 1. If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
 
 ## Migrate the files and the database
-**Please note**: this is much more complicated than migrating only the files and also not as failproof so be warned! Also, this will not work on former snap installations as the snap is read-only and thus you cannot install the necessary `pdo_pgsql` PHP extension. So if migrating from snap, you will need to use one of the other methods. However you could try to ask if the snaps maintainer could add this one small PHP extension to the snap here: https://github.com/nextcloud-snap/nextcloud-snap/issues which would allow for an easy migration.
+**Please note**: this is much more complicated than migrating only the files and also not as failproof so be warned! If you are migrating from a snap installation, please first follow the [dedicated snap migration steps](#migrating-from-a-snap-installation) below, which show you how to perform the database conversion using a temporary Docker container. Once done, you can continue from step 5 of this guide.
 
 The procedure for migrating the files and the database works like this:
 1. Make sure that your old instance is on exactly the same version like the version used in Nextcloud AIO. (e.g. 23.0.0) You can find the used version here: [click here](https://github.com/nextcloud/all-in-one/search?l=Dockerfile&q=NEXTCLOUD_VERSION&type=). If not, simply upgrade your former installation to that version or wait until the version used in Nextcloud AIO got updated to the same version of your former installation or the other way around.
@@ -87,6 +87,130 @@ If not, feel free to restore the AIO instance from backup and start at step 8 ag
 
 If the restored data is older than any clients you want to continue to sync, for example if the server was down for a period of time during migration, you may want to take a look at [Synchronising with clients after migration](/migration.md#synchronising-with-clients-after-migration) below.
 
+### Migrating from a snap installation
+
+**Disclaimer:** it might be possible that the guide below is not working 100% correctly, yet. Improvements to it are very welcome!
+
+Since the Nextcloud snap is read-only, it is not possible to install the `pdo_pgsql` PHP extension inside the snap to perform the MySQL-to-PostgreSQL database conversion required by AIO. As a workaround, a temporary [nextcloud/docker](https://github.com/nextcloud/docker) container can be used as an intermediate environment that already includes `pdo_pgsql` and can convert the snap's MySQL database to PostgreSQL for you.
+
+This procedure covers steps 1–3 of the regular migration above (version matching, app updates, and database conversion) and also produces the `database-dump.sql` needed for step 4. Once finished, continue from step 5 of the [Migrate the files and the database](#migrate-the-files-and-the-database) procedure above.
+
+1. **Create a backup of the snap before doing anything else**, so you can restore the snap to its current state if anything goes wrong:
+    ```
+    sudo snap save nextcloud
+    ```
+    This creates a snapshot that can be restored later with `sudo snap restore <snapshot-id>`. The snapshot ID is shown in the output of `snap save`. You can also list existing snapshots with `snap saved`.
+1. Note the exact Nextcloud version of your snap installation:
+    ```
+    sudo nextcloud.occ -V
+    ```
+1. Make sure that this version matches exactly the version used in Nextcloud AIO. You can find the AIO version here: [click here](https://github.com/nextcloud/all-in-one/search?l=Dockerfile&q=NEXTCLOUD_VERSION&type=). If they do not match, upgrade your snap with `sudo snap refresh nextcloud --channel=<major-version>/stable` or wait for AIO to be updated to the same version.
+1. Update all installed Nextcloud apps to their latest versions:
+    ```
+    sudo nextcloud.occ app:update --all
+    ```
+1. Retrieve the necessary configuration values from the snap using `nextcloud.occ` and store them in environment variables. Do this **before** stopping the snap, as `nextcloud.occ` requires the snap services to be running:
+    ```
+    export INSTANCEID=$(sudo nextcloud.occ config:system:get instanceid)
+    export PASSWORDSALT=$(sudo nextcloud.occ config:system:get passwordsalt)
+    export SECRET=$(sudo nextcloud.occ config:system:get secret)
+    export TABLE_PREFIX=$(sudo nextcloud.occ config:system:get dbtableprefix || echo "oc_")
+    export SNAP_DATA=$(sudo nextcloud.occ config:system:get datadirectory)
+    # Note down SNAP_DATA — you will need it later when copying files
+    echo "Snap data directory: $SNAP_DATA"
+    ```
+1. Export a dump of the snap's MySQL database:
+    ```
+    sudo nextcloud.mysqldump > ~/mysql-dump.sql
+    ```
+1. Stop the snap to prevent further writes during the migration:
+    ```
+    sudo snap stop nextcloud
+    ```
+1. Set up environment variables for the temporary containers (adjust the version and passwords as needed):
+    ```
+    export NEXTCLOUD_VERSION="29.0.0"  # Replace with the exact version from step 2
+    export MYSQL_PASSWORD="mysql-temp-password"
+    export PG_USER="ncadmin"
+    export PG_PASSWORD="my-temporary-pg-password"
+    export PG_DATABASE="nextcloud_db"
+    ```
+1. Create a Docker network for the temporary migration containers:
+    ```
+    docker network create nextcloud-migration
+    ```
+1. Start a temporary MySQL container and import the snap database dump into it:
+    ```
+    docker run -d \
+      --name mysql-migration \
+      --network nextcloud-migration \
+      -e MYSQL_ROOT_PASSWORD="mysql-root-temp" \
+      -e MYSQL_DATABASE="nextcloud" \
+      -e MYSQL_USER="nextcloud" \
+      -e MYSQL_PASSWORD="$MYSQL_PASSWORD" \
+      mysql:8
+    # Wait for MySQL to finish starting up before importing
+    until docker exec mysql-migration mysqladmin ping -h localhost --silent 2>/dev/null; do sleep 1; done
+    docker exec -i mysql-migration mysql -u nextcloud -p"$MYSQL_PASSWORD" nextcloud < ~/mysql-dump.sql
+    ```
+1. Start a temporary PostgreSQL container as the migration target:
+    ```
+    docker run -d \
+      --name postgres-migration \
+      --network nextcloud-migration \
+      -e POSTGRES_USER="$PG_USER" \
+      -e POSTGRES_PASSWORD="$PG_PASSWORD" \
+      -e POSTGRES_DB="$PG_DATABASE" \
+      postgres:16
+    ```
+1. Create a temporary config file for the migration container using the values retrieved in step 5:
+    ```
+    cat > /tmp/migration-config.php << EOF
+    <?php
+    \$CONFIG = array(
+      'instanceid' => '$INSTANCEID',
+      'passwordsalt' => '$PASSWORDSALT',
+      'secret' => '$SECRET',
+      'dbtype' => 'mysql',
+      'dbname' => 'nextcloud',
+      'dbhost' => 'mysql-migration',
+      'dbport' => '',
+      'dbtableprefix' => '$TABLE_PREFIX',
+      'dbuser' => 'nextcloud',
+      'dbpassword' => '$MYSQL_PASSWORD',
+      'datadirectory' => '$SNAP_DATA',
+      'installed' => true,
+    );
+    EOF
+    ```
+1. Run a temporary nextcloud/docker container to convert the MySQL database to PostgreSQL. Note that the container image version must match the Nextcloud version you noted in step 2, and that `pdo_pgsql` is already included in the `nextcloud` Docker image:
+    ```
+    docker run --rm \
+      --network nextcloud-migration \
+      --entrypoint bash \
+      -v /tmp/migration-config.php:/var/www/html/config/config.php:rw \
+      -v "${SNAP_DATA}:${SNAP_DATA}:ro" \
+      nextcloud:${NEXTCLOUD_VERSION}-apache \
+      -c "php /var/www/html/occ db:convert-type --all-apps --password '$PG_PASSWORD' pgsql '$PG_USER' postgres-migration '$PG_DATABASE'"
+    ```
+    **Please note:** The `occ` command may print a warning about being run as root — this can be safely ignored for this migration step.
+1. Export the converted PostgreSQL database:
+    ```
+    docker exec postgres-migration pg_dump -U "$PG_USER" "$PG_DATABASE" > ~/database-dump.sql
+    ```
+    **Please note:** The exact name of the database export file is important! (`database-dump.sql`)
+1. Clean up the temporary containers and network:
+    ```
+    docker rm -f mysql-migration postgres-migration
+    docker network rm nextcloud-migration
+    ```
+1. You now have a `~/database-dump.sql`. Continue from step 5 of the [Migrate the files and the database](#migrate-the-files-and-the-database) procedure above. When those steps ask for your old data directory path, use the `$SNAP_DATA` value noted in step 5 (typically `/var/snap/nextcloud/common`). If you have opened a new shell session since then, you can retrieve it again with `sudo nextcloud.occ config:system:get datadirectory` (requires the snap to be running) or read it directly from `/var/snap/nextcloud/current/nextcloud/config/config.php`.
+1. Once you have verified that the migration to AIO was successful and everything is working correctly, you can permanently remove the Nextcloud snap from your system:
+    ```
+    sudo snap remove --purge nextcloud
+    ```
+    The `--purge` flag removes the snap along with all its saved snapshots and data. Omit it if you want to keep the snap snapshots as a fallback. **Only do this after you are fully satisfied that your AIO instance is working correctly**, as this action cannot be undone.
+
 ## Use the user_migration app
 A new way since the Nextcloud update to 24 is to use the new [user_migration app](https://apps.nextcloud.com/apps/user_migration#app-gallery). It allows to export the most important data on one instance and import it on a different Nextcloud instance. For that, you need to install and enable the user_migration app on your old instance, trigger the export for the user, create the user on the new instance, log in with that user and import the archive that was created during the export. This then needs to be done for each user that you want to migrate.
 

php/composer.lock

@@ -1532,7 +1532,7 @@
         },
         {
             "name": "symfony/polyfill-ctype",
-            "version": "v1.36.0",
+            "version": "v1.37.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/polyfill-ctype.git",
@@ -1591,7 +1591,7 @@
                 "portable"
             ],
             "support": {
-                "source": "https://github.com/symfony/polyfill-ctype/tree/v1.36.0"
+                "source": "https://github.com/symfony/polyfill-ctype/tree/v1.37.0"
             },
             "funding": [
                 {
@@ -1615,7 +1615,7 @@
         },
         {
             "name": "symfony/polyfill-mbstring",
-            "version": "v1.36.0",
+            "version": "v1.37.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/polyfill-mbstring.git",
@@ -1676,7 +1676,7 @@
                 "shim"
             ],
             "support": {
-                "source": "https://github.com/symfony/polyfill-mbstring/tree/v1.36.0"
+                "source": "https://github.com/symfony/polyfill-mbstring/tree/v1.37.0"
             },
             "funding": [
                 {
@@ -1700,7 +1700,7 @@
         },
         {
             "name": "symfony/polyfill-php81",
-            "version": "v1.36.0",
+            "version": "v1.37.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/polyfill-php81.git",
@@ -1756,7 +1756,7 @@
                 "shim"
             ],
             "support": {
-                "source": "https://github.com/symfony/polyfill-php81/tree/v1.36.0"
+                "source": "https://github.com/symfony/polyfill-php81/tree/v1.37.0"
             },
             "funding": [
                 {
@@ -4284,16 +4284,16 @@
         },
         {
             "name": "symfony/polyfill-intl-grapheme",
-            "version": "v1.36.0",
+            "version": "v1.37.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/polyfill-intl-grapheme.git",
-                "reference": "ad1b7b9092976d6c948b8a187cec9faaea9ec1df"
+                "reference": "4864388bfbd3001ce88e234fab652acd91fdc57e"
             },
             "dist": {
                 "type": "zip",
-                "url": "https://api.github.com/repos/symfony/polyfill-intl-grapheme/zipball/ad1b7b9092976d6c948b8a187cec9faaea9ec1df",
-                "reference": "ad1b7b9092976d6c948b8a187cec9faaea9ec1df",
+                "url": "https://api.github.com/repos/symfony/polyfill-intl-grapheme/zipball/4864388bfbd3001ce88e234fab652acd91fdc57e",
+                "reference": "4864388bfbd3001ce88e234fab652acd91fdc57e",
                 "shasum": ""
             },
             "require": {
@@ -4342,7 +4342,7 @@
                 "shim"
             ],
             "support": {
-                "source": "https://github.com/symfony/polyfill-intl-grapheme/tree/v1.36.0"
+                "source": "https://github.com/symfony/polyfill-intl-grapheme/tree/v1.37.0"
             },
             "funding": [
                 {
@@ -4362,11 +4362,11 @@
                     "type": "tidelift"
                 }
             ],
-            "time": "2026-04-10T16:19:22+00:00"
+            "time": "2026-04-26T13:13:48+00:00"
         },
         {
             "name": "symfony/polyfill-intl-normalizer",
-            "version": "v1.36.0",
+            "version": "v1.37.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/polyfill-intl-normalizer.git",
@@ -4427,7 +4427,7 @@
                 "shim"
             ],
             "support": {
-                "source": "https://github.com/symfony/polyfill-intl-normalizer/tree/v1.36.0"
+                "source": "https://github.com/symfony/polyfill-intl-normalizer/tree/v1.37.0"
             },
             "funding": [
                 {
@@ -4451,7 +4451,7 @@
         },
         {
             "name": "symfony/polyfill-php84",
-            "version": "v1.36.0",
+            "version": "v1.37.0",
             "source": {
                 "type": "git",
                 "url": "https://github.com/symfony/polyfill-php84.git",
@@ -4507,7 +4507,7 @@
                 "shim"
             ],
             "support": {
-                "source": "https://github.com/symfony/polyfill-php84/tree/v1.36.0"
+                "source": "https://github.com/symfony/polyfill-php84/tree/v1.37.0"
             },
             "funding": [
                 {

php/containers.json

@@ -45,6 +45,7 @@
         "COLLABORA_HOST=nextcloud-aio-collabora",
         "TALK_HOST=nextcloud-aio-talk",
         "APACHE_PORT=%APACHE_PORT%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "ONLYOFFICE_HOST=nextcloud-aio-onlyoffice",
         "TZ=%TIMEZONE%",
         "APACHE_MAX_SIZE=%APACHE_MAX_SIZE%",
@@ -120,6 +121,7 @@
         "POSTGRES_PASSWORD=%DATABASE_PASSWORD%",
         "POSTGRES_DB=nextcloud_database",
         "POSTGRES_USER=nextcloud",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "PGTZ=%TIMEZONE%"
       ],
@@ -222,6 +224,7 @@
         "SIGNALING_SECRET=%SIGNALING_SECRET%",
         "ONLYOFFICE_SECRET=%ONLYOFFICE_SECRET%",
         "AIO_URL=%AIO_URL%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "NC_AIO_VERSION=v%AIO_VERSION%",
         "NEXTCLOUD_MOUNT=%NEXTCLOUD_MOUNT%",
         "CLAMAV_ENABLED=%CLAMAV_ENABLED%",
@@ -311,6 +314,7 @@
       ],
       "environment": [
         "NEXTCLOUD_HOST=nextcloud-aio-nextcloud",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%"
       ],
       "restart": "unless-stopped",
@@ -340,6 +344,7 @@
       "internal_port": "6379",
       "environment": [
         "REDIS_HOST_PASSWORD=%REDIS_PASSWORD%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%"
       ],
       "volumes": [
@@ -381,8 +386,9 @@
       "internal_port": "9980",
       "environment": [
         "aliasgroup1=https://%NC_DOMAIN%:443,http://nextcloud-aio-apache.nextcloud-aio:23973",
-        "extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:logging.disable_server_audit=true --o:logging.level=warning --o:logging.level_startup=warning --o:welcome.enable=false --o:fetch_update_check=0 --o:allow_update_popup=false %COLLABORA_SECCOMP_POLICY% --o:remote_font_config.url=https://%NC_DOMAIN%/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+",
+        "extra_params=--o:ssl.enable=false --o:ssl.termination=true --o:logging.disable_server_audit=true --o:welcome.enable=false --o:fetch_update_check=0 --o:allow_update_popup=false %COLLABORA_SECCOMP_POLICY% --o:remote_font_config.url=https://%NC_DOMAIN%/apps/richdocuments/settings/fonts.json --o:net.post_allow.host[0]=.+",
         "dictionaries=%COLLABORA_DICTIONARIES%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "server_name=%NC_DOMAIN%",
         "DONT_GEN_SSL_CERT=1"
@@ -453,6 +459,7 @@
         "TALK_HOST=nextcloud-aio-talk",
         "TURN_SECRET=%TURN_SECRET%",
         "SIGNALING_SECRET=%SIGNALING_SECRET%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "TALK_PORT=%TALK_PORT%",
         "INTERNAL_SECRET=%TALK_INTERNAL_SECRET%"
@@ -500,6 +507,7 @@
       "internal_port": "1234",
       "environment": [
         "NC_DOMAIN=%NC_DOMAIN%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "RECORDING_SECRET=%RECORDING_SECRET%",
         "INTERNAL_SECRET=%TALK_INTERNAL_SECRET%"
@@ -543,6 +551,7 @@
         "BORG_REMOTE_REPO=%BORGBACKUP_REMOTE_REPO%",
         "BORG_PASSWORD=%BORGBACKUP_PASSWORD%",
         "BORG_MODE=%BORGBACKUP_MODE%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "SELECTED_RESTORE_TIME=%SELECTED_RESTORE_TIME%",
         "RESTORE_EXCLUDE_PREVIEWS=%RESTORE_EXCLUDE_PREVIEWS%",
         "BACKUP_RESTORE_PASSWORD=%BACKUP_RESTORE_PASSWORD%",
@@ -610,7 +619,8 @@
       "image": "ghcr.io/nextcloud-releases/aio-watchtower",
       "init": true,
       "environment": [
-        "CONTAINER_TO_UPDATE=nextcloud-aio-mastercontainer"
+        "CONTAINER_TO_UPDATE=nextcloud-aio-mastercontainer",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%"
       ],
       "volumes": [
         {
@@ -641,7 +651,8 @@
       "internal_port": "%APACHE_PORT%",
       "environment": [
         "INSTANCE_ID=%INSTANCE_ID%",
-        "APACHE_PORT=%APACHE_PORT%"
+        "APACHE_PORT=%APACHE_PORT%",
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%"
       ],
       "secrets": [
         "INSTANCE_ID"
@@ -676,6 +687,7 @@
       ],
       "internal_port": "3310",
       "environment": [
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "MAX_SIZE=%NEXTCLOUD_UPLOAD_LIMIT%"
       ],
@@ -721,6 +733,8 @@
       ],
       "internal_port": "80",
       "environment": [
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
+        "LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "JWT_ENABLED=true",
         "JWT_HEADER=AuthorizationJwt",
@@ -764,6 +778,7 @@
       ],
       "internal_port": "9000",
       "environment": [
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "IMAGINARY_SECRET=%IMAGINARY_SECRET%"
       ],
@@ -805,12 +820,12 @@
       ],
       "internal_port": "9200",
       "environment": [
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "ES_JAVA_OPTS=%FULLTEXTSEARCH_JAVA_OPTIONS%",
         "bootstrap.memory_lock=false",
         "cluster.name=nextcloud-aio",
         "discovery.type=single-node",
-        "logger.level=WARN",
         "http.port=9200",
         "xpack.license.self_generated.type=basic",
         "xpack.security.enabled=false",
@@ -845,6 +860,7 @@
       "init": true,
       "internal_port": "2375",
       "environment": [
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%"
       ],
       "volumes": [
@@ -876,7 +892,6 @@
       "environment": [
         "HP_SHARED_KEY=%HP_SHARED_KEY%",
         "NC_INSTANCE_URL=https://%NC_DOMAIN%",
-        "HP_LOG_LEVEL=warning",
         "HP_FRP_DISABLE_TLS=true",
         "TZ=%TIMEZONE%"
       ],
@@ -928,6 +943,7 @@
       ],
       "internal_port": "3002",
       "environment": [
+        "AIO_LOG_LEVEL=%AIO_LOG_LEVEL%",
         "TZ=%TIMEZONE%",
         "NEXTCLOUD_URL=https://%NC_DOMAIN%",
         "JWT_SECRET_KEY=%WHITEBOARD_SECRET%",

php/public/index.php

@@ -45,12 +45,16 @@ $container->set(Guard::class, function () use ($responseFactory) {
 // This is needed because the session cookie was renamed in a previous release. Without this,
 // users that were logged in before the update would be logged out after the container restarts.
 $wasAuthenticated = false;
+$oldSessionTimestamp = null;
 if (!isset($_COOKIE['__Host-Http-PHPSESSID']) && isset($_COOKIE['PHPSESSID'])) {
     session_name('PHPSESSID');
     if (session_start(['save_path' => $dataConst->GetSessionDirectory(), 'use_strict_mode' => true])) {
         $wasAuthenticated = isset($_SESSION[\AIO\Auth\AuthManager::SESSION_KEY]) && $_SESSION[\AIO\Auth\AuthManager::SESSION_KEY] === true;
-        session_unset();
-        session_destroy();
+        $oldSessionTimestamp = isset($_SESSION['date_time']) ? (int)$_SESSION['date_time'] : null;
+        // Do not destroy the old session: if the response carrying the new __Host-Http-PHPSESSID
+        // cookie is lost (e.g., due to a 502 during a mastercontainer update), the client can
+        // retry with the old PHPSESSID cookie and still be authenticated.
+        session_write_close();
     }
 }
 
@@ -68,7 +72,15 @@ session_start([
 ]);
 
 if ($wasAuthenticated) {
-    $container->get(\AIO\Auth\AuthManager::class)->SetAuthState(true);
+    if ($oldSessionTimestamp !== null) {
+        // Use MigrateAuthState to preserve the original login timestamp. This prevents the
+        // session deduplicator from running and keeps the old PHPSESSID session file alive,
+        // so the client can retry with the old cookie if the 502 response causes the new
+        // __Host-Http-PHPSESSID cookie to not be received.
+        $container->get(\AIO\Auth\AuthManager::class)->MigrateAuthState($oldSessionTimestamp);
+    } else {
+        $container->get(\AIO\Auth\AuthManager::class)->SetAuthState(true);
+    }
 }
 $app->add(Guard::class);
 
@@ -91,6 +103,7 @@ $app->post('/api/docker/backup-check-repair', AIO\Controller\DockerController::c
 $app->post('/api/docker/backup-test', AIO\Controller\DockerController::class . ':StartBackupContainerTest');
 $app->post('/api/docker/restore', AIO\Controller\DockerController::class . ':StartBackupContainerRestore');
 $app->post('/api/docker/stop', AIO\Controller\DockerController::class . ':StopContainer');
+$app->post('/api/docker/backup-reset-location', AIO\Controller\DockerController::class . ':DeleteBorgBackupConfig');
 $app->post('/api/docker/prune', AIO\Controller\DockerController::class . ':SystemPrune');
 $app->get('/api/docker/logs', AIO\Controller\DockerController::class . ':GetLogs');
 $app->post('/api/auth/login', AIO\Controller\LoginController::class . ':TryLogin');

php/public/timezone.js

@@ -2,6 +2,6 @@ document.addEventListener("DOMContentLoaded", function(event) {
     // timezone
     let timezone = document.getElementById("timezone");
     if (timezone) {
-        timezone.value = Intl.DateTimeFormat().resolvedOptions().timeZone
+        timezone.placeholder = Intl.DateTimeFormat().resolvedOptions().timeZone
     }
 });

php/src/Auth/AuthManager.php

@@ -42,6 +42,18 @@ readonly class AuthManager {
         $_SESSION[self::SESSION_KEY] = $isLoggedIn;
     }
 
+    /**
+     * Migrates the authenticated state from an old session (different cookie name) to the new session.
+     * Unlike SetAuthState, this method preserves the original login timestamp and does not update
+     * the session_date_file, so the session deduplicator is not triggered. This keeps the old session
+     * file alive in case the response carrying the new cookie is lost (e.g., due to a 502 error during
+     * a mastercontainer update), allowing the client to retry with the old cookie.
+     */
+    public function MigrateAuthState(int $oldTimestamp) : void {
+        $_SESSION[self::SESSION_KEY] = true;
+        $_SESSION['date_time'] = $oldTimestamp;
+    }
+
     public function IsAuthenticated() : bool {
         return isset($_SESSION[self::SESSION_KEY]) && $_SESSION[self::SESSION_KEY] === true;
     }

php/src/Controller/ConfigurationController.php

@@ -3,16 +3,14 @@ declare(strict_types=1);
 
 namespace AIO\Controller;
 
-use AIO\ContainerDefinitionFetcher;
 use AIO\Data\ConfigurationManager;
 use AIO\Data\InvalidSettingConfigurationException;
-use AIO\Docker\DockerActionManager;
 use Psr\Http\Message\ResponseInterface as Response;
 use Psr\Http\Message\ServerRequestInterface as Request;
 
 readonly class ConfigurationController {
     public function __construct(
-        private ConfigurationManager $configurationManager
+        private ConfigurationManager $configurationManager,
     ) {
     }
 
@@ -132,10 +130,6 @@ readonly class ConfigurationController {
                 $this->configurationManager->collaboraAdditionalOptions = $additionalCollaboraOptions;
             }
 
-            if (isset($request->getParsedBody()['delete_borg_backup_location_vars'])) {
-                $this->configurationManager->deleteBorgBackupLocationItems();
-            }
-
             return $response->withStatus(201)->withHeader('Location', '.');
         } catch (InvalidSettingConfigurationException $ex) {
             $response->getBody()->write($ex->getMessage());

php/src/Controller/DockerController.php

@@ -328,6 +328,11 @@ readonly class DockerController {
         return $nonbufResp;
     }
 
+    public function DeleteBorgBackupConfig(Request $request, Response $response, array $args) : Response {
+        $this->dockerActionManager->deleteBorgBackupConfig();
+        return $response->withStatus(201)->withHeader('Location', '.');
+    }
+
     public function SystemPrune(Request $request, Response $response, array $args) : Response {
         // Get streaming response start and closure
         $nonbufResp = $this->startStreamingResponse($response);

php/src/Data/ConfigurationManager.php

@@ -5,6 +5,8 @@ namespace AIO\Data;
 
 use AIO\Auth\PasswordGenerator;
 use AIO\Controller\DockerController;
+use GuzzleHttp\Client;
+use GuzzleHttp\Exception\TransferException;
 
 class ConfigurationManager
 {
@@ -253,6 +255,11 @@ class ConfigurationManager
         set { $this->set('docker_socket_path', $value); }
     }
 
+    public string $aioLogLevel {
+        get => $this->getEnvironmentalVariableOrConfig('AIO_LOG_LEVEL', 'aio_log_level', 'warn');
+        set { $this->set('aio_log_level', $value); }
+    }
+
     public string $trustedCacertsDir {
         get => $this->getEnvironmentalVariableOrConfig('NEXTCLOUD_TRUSTED_CACERTS_DIR', 'trusted_cacerts_dir', '');
         set { $this->set('trusted_cacerts_dir', $value); }
@@ -302,6 +309,9 @@ class ConfigurationManager
         if ($this->config === [] && file_exists(DataConst::GetConfigFile()))
         {
             $configContent = (string)file_get_contents(DataConst::GetConfigFile());
+            if ($configContent === '') {
+                throw new \RuntimeException("The config file " . DataConst::GetConfigFile() . " is empty. It may have been truncated due to low disk space. Please restore it from a backup.");
+            }
             $this->config = json_decode($configContent, true, 512, JSON_THROW_ON_ERROR);
         }
 
@@ -360,7 +370,7 @@ class ConfigurationManager
     }
 
     public function getRegisteredSecret(string $secretId) : string {
-        if ($this->secrets[$secretId]) {
+        if (isset($this->secrets[$secretId])) {
             return $this->getAndGenerateSecret($secretId);
         }
         throw new \Exception("The secret " . $secretId . " was not registered. Please check if it is defined in secrets of containers.json.");
@@ -527,23 +537,22 @@ class ConfigurationManager
             }
 
             // Check if response is correct
-            $ch = curl_init();
-            if ($ch === false) {
-                throw new InvalidSettingConfigurationException('Could not init curl! Please check the logs!');
-            }
             $testUrl = $protocol . $domain . ':443';
-            curl_setopt($ch, CURLOPT_URL, $testUrl);
-            curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
-            curl_setopt($ch, CURLOPT_CONNECTTIMEOUT, 10);
-            curl_setopt($ch, CURLOPT_TIMEOUT, 10);
-            $response = (string)curl_exec($ch);
-            # Get rid of trailing \n
-            $response = str_replace("\n", "", $response);
+            $errorMessage = '';
+            $guzzleClient = new Client(['connect_timeout' => 10, 'timeout' => 10, 'http_errors' => false]);
+            try {
+                $guzzleResponse = $guzzleClient->get($testUrl);
+                # Get rid of trailing \n
+                $response = str_replace("\n", "", (string)$guzzleResponse->getBody());
+            } catch (TransferException $e) {
+                $response = '';
+                $errorMessage = 'The error message was: ' . $e->getMessage();
+            }
 
             if ($response !== $instanceID) {
                 error_log('The response of the connection attempt to "' . $testUrl . '" was: ' . $response);
                 error_log('Expected was: ' . $instanceID);
-                error_log('The error message was: ' . curl_error($ch));
+                error_log($errorMessage);
                 $notice = "Domain does not point to this server or the reverse proxy is not configured correctly. See the mastercontainer logs for more details. ('sudo docker logs -f nextcloud-aio-mastercontainer')";
                 if ($port === '443') {
                     $notice .= " If you should be using Cloudflare, make sure to disable the Cloudflare Proxy feature as it might block the domain validation. Same for any other firewall or service that blocks unencrypted access on port 443.";
@@ -560,7 +569,6 @@ class ConfigurationManager
         $this->set('domain', $domain);
         // Reset the borg restore password when setting the domain
         $this->borgRestorePassword = '';
-        $this->startTransaction();
         $this->commitTransaction();
     }
 
@@ -702,7 +710,21 @@ class ConfigurationManager
         if ($df !== false && (int)$df < $size) {
             throw new InvalidSettingConfigurationException(DataConst::GetDataDirectory() . " does not have enough space for writing the config file! Not writing it back!");
         }
-        file_put_contents(DataConst::GetConfigFile(), $content);
+        // Write to a temp file first to avoid truncating the config file if the
+        // disk fills up mid-write. rename() is atomic on POSIX filesystems, so the
+        // original config is never touched until the new content is fully on disk.
+        $tempFile = DataConst::GetConfigFile() . '.tmp';
+        if (file_put_contents($tempFile, $content) === false) {
+            // The file probably wasn't created, but better check nonetheless.
+            if (file_exists($tempFile)) {
+                unlink($tempFile);
+            }
+            throw new InvalidSettingConfigurationException("Failed to write temporary config file: " . $tempFile);
+        }
+        if (!rename($tempFile, DataConst::GetConfigFile())) {
+            unlink($tempFile);
+            throw new InvalidSettingConfigurationException("Failed to rename " . $tempFile . " to " . DataConst::GetConfigFile());
+        }
         $this->config = [];
     }
 
@@ -1049,6 +1071,7 @@ class ConfigurationManager
             'NC_DOMAIN' => $this->domain,
             'NC_BASE_DN' => $this->getBaseDN(),
             'AIO_TOKEN' => $this->aioToken,
+            'AIO_LOG_LEVEL' => $this->aioLogLevel,
             'BORGBACKUP_REMOTE_REPO' => $this->borgRemoteRepo,
             'BORGBACKUP_MODE' => $this->backupMode,
             'AIO_URL' => $this->aioUrl,

php/src/Docker/DockerActionManager.php

@@ -145,6 +145,27 @@ readonly class DockerActionManager {
         }
     }
 
+    public function deleteBorgBackupConfig(): void {
+        // Delete the borgbackup container
+        $id = 'nextcloud-aio-borgbackup';
+        $borgbackupContainer = $this->containerDefinitionFetcher->GetContainerById($id);
+        $this->DeleteContainer($borgbackupContainer);
+
+        // Delete the borg cache volume
+        $url = $this->BuildApiUrl('volumes/nextcloud_aio_backup_cache');
+        try {
+            $this->guzzleClient->delete($url);
+            error_log('nextcloud_aio_backup_cache volume deleted successfully.');
+        } catch (RequestException $e) {
+            if ($e->getCode() !== 404) {
+                error_log('Could not delete nextcloud_aio_backup_cache volume: ' . $e->getMessage());
+            }
+        }
+
+        // Clear the configuration variables and files
+        $this->configurationManager->deleteBorgBackupLocationItems();
+    }
+
     public function GetLogs(string $id, string $since = ''): string {
         $url = $this->BuildApiUrl(
             sprintf(
@@ -157,11 +178,12 @@ readonly class DockerActionManager {
         $response = "";
         $separator = "\r\n";
         $line = strtok($responseBody, $separator);
-        $response = substr((string)$line, 8) . $separator;
+        if ($line !== false) {
+            $response = substr($line, 8) . $separator;
+        }
 
-        while ($line !== false) {
-            $line = strtok($separator);
-            $response .= substr((string)$line, 8) . $separator;
+        while (($line = strtok($separator)) !== false) {
+            $response .= substr($line, 8) . $separator;
         }
 
         return $response;
@@ -187,7 +209,7 @@ readonly class DockerActionManager {
             ];
 
             if ($volume->name === 'nextcloud_aio_nextcloud_datadir' || $volume->name === 'nextcloud_aio_backupdir') {
-                return;
+                continue;
             }
 
             $firstChar = substr($volume->name, 0, 1);

php/templates/containers.twig

@@ -24,7 +24,7 @@
             <script type="text/javascript" src="second-tab-warning.js"></script>
 
             {# timezone-prefill #}
-            <script type="text/javascript" src="timezone.js"></script>
+            <script type="text/javascript" src="timezone.js?v1"></script>
 
             {# js for optional containers and additional containers forms #}
             <script type="text/javascript" src="containers-form-submit.js?v7"></script>
@@ -566,8 +566,7 @@
                                         {% endif %}
                                         is wrong or if you want to reset the backup location due to other reasons, you can do so by clicking on the button below.
                                         </p>
-                                        <form method="POST" action="api/configuration" class="xhr">
-                                            <input type="hidden" name="delete_borg_backup_location_vars" value="yes"/>
+                                        <form method="POST" action="api/docker/backup-reset-location" class="xhr">
                                             <input type="hidden" name="{{csrf.keys.name}}" value="{{csrf.name}}">
                                             <input type="hidden" name="{{csrf.keys.value}}" value="{{csrf.value}}">
                                             <input type="submit" value="Reset backup location" data-confirm='Are you sure that you want to reset the backup location?' />

php/templates/includes/aio-version.twig

@@ -1 +1 @@
-13.0.0
+13.0.2

readme.md

@@ -87,6 +87,70 @@ Included are:
 |---|---|
 | ![image](https://github.com/user-attachments/assets/6ef5d7b5-86f2-402c-bc6c-b633af2ca7dd) | ![image](https://github.com/user-attachments/assets/939d0fdf-436f-433d-82d3-27548263a040) |
 
+## Architecture overview
+
+```mermaid
+flowchart TB
+    %% ── Styles ───────────────────────────────────────────────────────────────────
+    classDef user      fill:#FFF3CD,stroke:#F0AD4E,color:#333
+    classDef master    fill:#E8D5F5,stroke:#9B59B6,color:#222
+    classDef core      fill:#D6EAF8,stroke:#2E86C1,color:#222
+    classDef opt       fill:#D5F5E3,stroke:#27AE60,color:#222
+    classDef community fill:#FDEBD0,stroke:#E67E22,color:#222
+    classDef access    fill:#EAFAF1,stroke:#1E8449,color:#222
+
+    %% ── Top row: people ─────────────────────────────────────────────────────────
+    YOU(["🧑‍💻 Admin\n(You)"]):::user
+    ENDUSER(["🧑‍🤝‍🧑 Users\n(family / team)"]):::user
+
+    %% ── Everything that runs inside AIO ─────────────────────────────────────────
+    subgraph AIO["  🐳  Nextcloud AIO  "]
+        MC(["🧠 Mastercontainer\n─────────────────────────\n▸ AIO interface :8080 / :8443\n▸ Manages & updates containers\n▸ Handles backups"]):::master
+
+        subgraph CORE["  📦  Core Stack  (auto-started)  "]
+            PROXY(["🔀 Apache\nProxy & HTTPS"]):::core
+            NC(["☁️ Nextcloud\nApp Server"]):::core
+            DB(["🗄️ PostgreSQL\nDatabase"]):::core
+            CACHE(["⚡ Redis\nCache"]):::core
+            PUSH(["🔔 Notify Push\nReal-time sync"]):::core
+        end
+
+        subgraph OPT["  🧩  Optional Built-in Containers  (enable in AIO interface)  "]
+            COLLA(["📄 Nextcloud Office"]):::opt
+            OO(["📄 OnlyOffice\nDocument Server"]):::opt
+            TALK(["🎙️ Talk\nVideo & Voice calls"]):::opt
+            TALKREC(["🎬 Talk Recording"]):::opt
+            FTS(["🔎 Full-text Search\n(Elasticsearch)"]):::opt
+            IMAG(["🖼️ Imaginary\nImage previews"]):::opt
+            CLAM(["🦠 ClamAV\nAntivirus"]):::opt
+            WB(["🖊️ Whiteboard"]):::opt
+        end
+
+        COMM(["🌍 Community Containers\n──────────────────────\n30+ optional add-ons\nSee community-containers/"]):::community
+        click COMM "https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers" "Browse community containers"
+    end
+
+    %% ── Result node (outside AIO) ────────────────────────────────────────────────
+    NC_URL(["🌐 https://your-domain.com\n✅ Nextcloud — ready to use!"]):::access
+
+    %% ── Flows ────────────────────────────────────────────────────────────────────
+    YOU -->|"① open :8080 or :8443 in browser"| MC
+    MC -->|"② auto-starts & wires up"| CORE
+    MC -. "③ enable in AIO interface" .-> OPT
+    MC -. "④ add via AIO interface" .-> COMM
+
+    PROXY --> NC
+    NC --- DB
+    NC --- CACHE
+    NC --- PUSH
+    OPT -->|"integrate with"| NC
+    COMM -.->|"integrate with"| NC
+
+    CORE -->|"⑤ stack is ready!"| NC_URL
+    ENDUSER -->|"⑥ browser / app"| NC_URL
+    YOU -->|"⑥ use normally"| NC_URL
+```
+
 ## How to use this?
 
 The steps below are written for Linux. For platform-specific guidance see:
@@ -219,6 +283,7 @@ https://your-domain-that-points-to-this-server.tld:8443
     - [Are there known problems when SELinux is enabled?](#are-there-known-problems-when-selinux-is-enabled)
 - [Customization](#customization)
     - [How to adjust the internally used docker api version?](#how-to-adjust-the-internally-used-docker-api-version)
+    - [How to adjust the log level for AIO components?](#how-to-adjust-the-log-level-for-aio-components)
     - [How to change the default location of Nextcloud's Datadir?](#how-to-change-the-default-location-of-nextclouds-datadir)
     - [How to configure custom UID/GID?](#how-to-configure-custom-uidgid)
     - [How to move the appdata folder from the datadir to an ssd to improve the performance?](#how-to-move-the-appdata-folder-from-the-datadir-to-an-ssd-to-improve-the-performance)
@@ -445,6 +510,9 @@ Yes. If SELinux is enabled, you might need to add the `--security-opt label:disa
 ### How to adjust the internally used docker api version?
 If you run an outdated or too new docker version, you might run into problems with the by AIO internally used docker api version. To fix this, you can specify the api version manually. You can do so by adding `--env DOCKER_API_VERSION=1.44` to the docker run command of the mastercontainer (but before the last line `ghcr.io/nextcloud-releases/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used). This variable excepts a string based on the pattern `[0-9].[0-9]+`, so e.g. `1.44`. ⚠️ However please note that only the default api version (unset this variable) is supported and tested by the maintainers of Nextcloud AIO. So use this on your own risk and things might break without warning.
 
+### How to adjust the log level for AIO components?
+You can globally adjust the log level of the included AIO components by adding `--env AIO_LOG_LEVEL=warn` to the docker run command of the mastercontainer. This setting is propagated from the mastercontainer to the built-in sibling containers. If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command or compose file that you initially used. For troubleshooting, `debug` and `info` may additionally re-enable some supervisord child stdout or stderr streams that are normally suppressed in order to keep the default logs concise. Allowed values are `error`, `warn`, `info` and `debug`.
+
 ### How to change the default location of Nextcloud's Datadir?
 > [!WARNING]  
 > Do not set or adjust this value after the initial Nextcloud installation is done! If you still want to do it afterwards, see [this](https://github.com/nextcloud/all-in-one/discussions/890#discussioncomment-3089903) on how to do it.
@@ -1219,7 +1287,7 @@ This project values stability over new features. That means that when a new majo
 AIO ships its own update notifications implementation. It checks if container updates are available. If so, it sends a notification with the title `Container updates available!` on saturdays to Nextcloud users that are part of the `admin` group. If the Nextcloud container image should be older than 90 days (~3 months) and thus badly outdated, AIO sends a notification to all Nextcloud users with the title `AIO is outdated!`. Thus admins should make sure to update the container images at least once every 3 months in order to make sure that the instance gets all security bugfixes as soon as possible.
 
 ### Huge docker logs
-If you should run into issues with huge docker logs, you can adjust the log size by following https://docs.docker.com/config/containers/logging/local/#usage. However for the included AIO containers, this should usually not be needed because almost all of them have the log level set to warn so they should not produce many logs.
+If you should run into issues with huge docker logs, you can adjust the log size by following https://docs.docker.com/config/containers/logging/local/#usage. You can additionally reduce the verbosity of the included AIO containers by setting `AIO_LOG_LEVEL=error` on the mastercontainer. By default, AIO keeps the existing component-specific log defaults, so this should usually not be needed.
 
 <details>
 

reverse-proxy.md

@@ -6,7 +6,7 @@ This guide explains how to connect to Nextcloud AIO securely via HTTPS (TLS) usi
 
 - **Integrated**: AIO's built-in reverse proxy with automatic HTTPS
 - **External**: An external reverse proxy (such as Caddy or Nginx or Cloudflare Proxy)
-- **Secure tunnel**: Tunneling services for private network access or public access without port forwarding (such as Tailscale Serve or Cloudflare Tunnel)
+- **Secure tunnel**: Tunneling services for private network access or public access without port forwarding (such as Tailscale Serve, Cloudflare Tunnel, or Pangolin)
 
 ## Choosing Your Approach
 
@@ -23,6 +23,7 @@ This guide explains how to connect to Nextcloud AIO securely via HTTPS (TLS) usi
 | **Integrated** | Simple setups, single service on port 443 | Public IP, dedicated port 443 | Yes (443) |
 | **External Reverse Proxy** (including Cloudflare Proxy) | Multiple services, existing web server, or users wanting DDoS protection | Existing reverse proxy, willingness to set one up, or Cloudflare account | Yes (443) |
 | **Cloudflare Tunnel** | No port forwarding possible/desired, public access | Cloudflare account | No |
+| **Pangolin** | No port forwarding possible/desired, public or private access, self-hostable tunnel | Pangolin Cloud account or self-hosted Pangolin server | No |
 | **Tailscale Serve** | Private access (tailnet only) | Tailscale account | No |
 | **Tailscale Funnel** | Public access via Tailscale | Tailscale account | No |
 
@@ -68,29 +69,32 @@ Using an existing external reverse proxy is required in particular if port `443/
 > [!NOTE]
 > An external reverse proxy can also facilitate other routing approaches, but Nextcloud AIO only supports having its own dedicated hostname (e.g., `cloud.example.com`). You cannot run it in a subfolder like `example.com/nextcloud/`.[^shared]
 
-### Secure tunnel: Using AIO with a secure tunneling service (*Tailscale, Cloudflare*)
+### Secure tunnel: Using AIO with a secure tunneling service (*Tailscale, Cloudflare, Pangolin*)
 
-Cloudflare and Tailscale offer secure tunneling services that let you access your Nextcloud without opening ports on your firewall. 
+Cloudflare, Tailscale, and Pangolin offer secure tunneling services that let you access your Nextcloud without opening ports on your firewall. 
 
 #### Private network access
 
 For Nextcloud AIO, you can use:
 - **Cloudflare Tunnel (`cloudflared`)** - Secure outbound-only tunnels that don't require exposing ports
 - **Tailscale Serve** - Expose services privately on your Tailscale network (tailnet only)
+- **Pangolin** - WireGuard-based outbound tunnels using the Newt connector; can be used for both private and public access
 
-Both options provide private network access to your Nextcloud AIO instance.
+All three options provide private network access to your Nextcloud AIO instance.
 
 #### Public Internet access (without port forwarding)
 
 To make your Nextcloud AIO instance accessible from the public Internet (not just your private network), you can use:
 - **Cloudflare Tunnel** with public routes enabled (which combines Cloudflare Tunnel with Cloudflare's proxy features)
 - **Tailscale Funnel** - Expose services to the public Internet via Tailscale's infrastructure
+- **Pangolin** - Expose services publicly via Pangolin Cloud or a self-hosted Pangolin server
 
-**Comparison of Cloudflare and Tailscale options:**
+**Comparison of Cloudflare, Tailscale, and Pangolin options:**
 
 | Feature | Access Scope | Inbound Ports Required | Use Case |
 |---------|--------------|----------------|----------|
 | **Cloudflare Tunnel** | Public Internet | None | Public access without port forwarding |
+| **Pangolin** | Public Internet or private | None | Public or private access; self-hostable |
 | **Tailscale Serve** | Your Tailscale network only | None | Private access for you and invited users |
 | **Tailscale Funnel** | Public Internet | None | Public access through Tailscale |
 
@@ -737,6 +741,48 @@ httpServer.on('upgrade', (req, socket, head) => {
 
 </details>
 
+##### Pangolin
+
+<details>
+
+<summary>click here to expand</summary>
+
+[Pangolin](https://pangolin.net/) is an open-source, identity-based remote access platform built on WireGuard that enables secure connectivity to private resources without opening inbound firewall ports. It uses the **Newt** connector as an outbound-only WireGuard tunnel client that runs alongside AIO on your server and connects to a Pangolin server (either Pangolin Cloud or your own self-hosted instance). From AIO's perspective, Pangolin works like a reverse proxy: Pangolin handles TLS and routes public traffic through the tunnel to AIO.
+
+**Requirements:**
+- A [Pangolin Cloud](https://app.pangolin.net/) account **or** a [self-hosted Pangolin server](https://docs.pangolin.net/self-host/quick-install)
+- No open inbound ports required
+
+**Setup:**
+
+1. **Set up Pangolin**: Either sign up for a free [Pangolin Cloud](https://app.pangolin.net/) account, or [self-host Pangolin](https://docs.pangolin.net/self-host/quick-install) on a VPS with a public IP address.
+
+1. **Create a site**: In the Pangolin dashboard, create a new site for the machine that will run AIO. Follow the instructions to generate a **Newt ID** and **Newt secret** for the site.
+
+1. **Deploy Newt on the AIO host**: Run the Newt connector on the same machine as AIO. You can deploy it as a Docker container alongside AIO:
+
+    ```yaml
+    services:
+      newt:
+        image: fosrl/newt
+        restart: unless-stopped
+        environment:
+          - PANGOLIN_ENDPOINT=https://app.pangolin.net  # For Pangolin Cloud; replace with your self-hosted server URL if self-hosting
+          - NEWT_ID=<your-newt-id>
+          - NEWT_SECRET=<your-newt-secret>
+    ```
+
+    Or as a standalone binary — see the [Newt documentation](https://github.com/fosrl/newt) for details.
+
+1. **Create a resource**: In the Pangolin dashboard, create a new resource for the site. Set the target to `http://private.ip.address.of.server:11000`.<br>
+    ⚠️ **Please note:** look into [this](#adapting-the-sample-web-server-configurations-below) to adapt the port and address to match your `APACHE_PORT` and `APACHE_IP_BINDING` settings.
+
+1. **Configure AIO**: When starting AIO, add `--env SKIP_DOMAIN_VALIDATION=true` to disable domain validation (domain validation is known to not work through Pangolin tunnels). Use the domain assigned by Pangolin as your Nextcloud domain when opening the AIO interface.
+
+1. Now continue with [point 2](#2-use-this-startup-command).
+
+</details>
+
 ##### Synology Reverse Proxy
 
 <details>

tests/QA/060-environmental-variables.md

@@ -7,6 +7,8 @@
 - [ ] Make also sure that reverse proxies work by following https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md#reverse-proxy-documentation and following [001-initial-setup.md](./001-initial-setup.md) and [002-new-instance.md](./002-new-instance.md)
 - [ ] When starting the mastercontainer with `--env SKIP_DOMAIN_VALIDATION=true` on a clean instance, it should skip the domain verification. So it should accept any domain that you type in then.
 - [ ] When starting the mastercontainer with `--env DOCKER_API_VERSION=1.44` it should use the mentioned docker API version internally for all requests
+- [ ] When starting the mastercontainer with `--env AIO_LOG_LEVEL=info` on a clean instance, the resulting sibling containers should receive the propagated global log-level variable and the configured components should no longer use their default warning or error levels. This should at least be verified for the mastercontainer, Apache, Nextcloud, Redis and Talk containers. In addition, previously suppressed supervisord stdout or stderr logs should become visible for the affected components.
+- [ ] When starting the mastercontainer with an invalid `AIO_LOG_LEVEL` value like `warning` or `verbose`, the container startup should fail with a message that only `debug`, `info`, `warn` and `error` are allowed.
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_DATADIR="/mnt/testdata"` it should map that location from `/mnt/testdata` to `/mnt/ncdata` inside the Nextcloud container. Not having adjusted the permissions correctly before starting the Nextcloud container the first time will not allow the Nextcloud container to start correctly. See https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir for allowed values.
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_MOUNT="/mnt/"` it should map `/mnt/` to `/mnt/` inside the Nextcloud container. See https://github.com/nextcloud/all-in-one#how-to-allow-the-nextcloud-container-to-access-directories-on-the-host for allowed values.
 - [ ] When starting the mastercontainer with `--env NEXTCLOUD_UPLOAD_LIMIT=11G` it should change Nextclouds upload limit to 11G. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-upload-limit-for-nextcloud for allowed values.