This environment variable when set to "true" will allow usage
of self-signed certificates.
Signed-off-by: Anupam Kumar <kyteinsky@gmail.com>
Signed-off-by: Simon L. <szaimen@e.mail.de>
Signed-off-by: Simon L. <szaimen@e.mail.de>
Revert "aio-interface: disable talk-recording correctly"
This reverts commit e9711aae78db91359aa6d6bfaf87f60a4453287c.
Update containers.twig
Hello again!
Ruikai Wang from the LiteSpeed team was gracious enough to teach us how it's done, and so, we added it here as well with step by step instructions and images.
You can change the text or remove the credits there without asking, so feel free!
Thanks for the awesome stuff.
Signed-off-by: Morrow Shore <97566823+MorrowShore@users.noreply.github.com>
Due to some testing its possible to install the agent via occ and the frontend by setting this on 60s. Lower values didn't work in my testing.
Signed-off-by: Bastian Derigs <155444921+derigs@users.noreply.github.com>
See: https://github.com/nextcloud/all-in-one/discussions/6064
`pihole/pihole@latest` has been updated to `v6`,
breaking the Web Admin interface at (http://192.168.x.x:8573/admin)
(Pi-hole itself continues working fine, it seems)
**Cause:** V6 replaced `lighttpd` with an *embedded webserver*
and changed most `pi-hole.json` *environment variables*.
**Fix:** This PR updates the environment variables to match the new v6 configuration.
Stopping and starting the container will apply the changes and
should fix the Web Admin interface.
Signed-off-by: David Hund <david.hund@gmail.com>
-If you use Cloudflare Tunnel or Cloudflare Proxy, see https://github.com/nextcloud/all-in-one#notes-on-cloudflare-proxytunnel for known issues/limitations and workarounds.
-For issues with Collabora or Talk, make sure to follow https://github.com/nextcloud/all-in-one/discussions/1358. It may already resolve your issue and makes it easier to help you.
-Before submitting a bug report, please read through the documentation available at https://github.com/nextcloud/all-in-one#faq
-Additional documentation is available here: https://github.com/nextcloud/all-in-one/discussions/categories/wiki
- You should also read through existing questions and their answer here: https://github.com/nextcloud/all-in-one/discussions/categories/questions
- Additional threads can be found here: https://help.nextcloud.com/tag/aio
- Existing feature requests are listed here: https://github.com/nextcloud/all-in-one/discussions/categories/ideas
--->
<!--- Please fill out the whole template below -->
echo"⚠️⚠️⚠️ '.noaiobackup' file was found in the preview directory. Excluding the preview directory from backup!"
fi
# Make sure that there is always a borg.config file before creating a new backup
if ! [ -f "/nextcloud_aio_volumes/nextcloud_aio_mastercontainer/data/borg.config"];then
@@ -203,7 +217,7 @@ if [ "$BORG_MODE" = backup ]; then
# Create the backup
echo"Starting the backup..."
get_start_time
if ! borg create "${BORG_OPTS[@]}""${BORG_EXCLUDE[@]}""::$CURRENT_DATE-nextcloud-aio""/nextcloud_aio_volumes/" --exclude-from /borg_excludes;then
if ! borg create "${BORG_OPTS[@]}""${BORG_INCLUDE[@]}""${BORG_EXCLUDE[@]}""::$CURRENT_DATE-nextcloud-aio""/nextcloud_aio_volumes/" --exclude-from /borg_excludes;then
echo"Deleting the failed backup archive..."
borg delete --stats "::$CURRENT_DATE-nextcloud-aio"
echo"Backup failed!"
@@ -320,16 +334,30 @@ if [ "$BORG_MODE" = restore ]; then
fi
echo"Restoring '$SELECTED_ARCHIVE'..."
# Exclude previews from restore if selected to speed up process
<p><a href="https://github.com/nextcloud/all-in-one#how-to-easily-log-in-to-the-aio-interface">Click here for more infos on this feature (e.g. also on how to change the link in the button)</a></p>
This container bundles caddy and auto-configures it for you. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden by listening on `bw.$NC_DOMAIN`, if installed. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart by listening on `mail.$NC_DOMAIN`, if installed. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin by listening on `media.$NC_DOMAIN`, if installed. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap by listening on `ldap.$NC_DOMAIN`, if installed. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb by listening on `tables.$NC_DOMAIN`, if installed.
This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed.
### Notes
- This container is incompatible with the [npmplus](https://github.com/nextcloud/all-in-one/tree/main/community-containers/npmplus) community container. So make sure that you do not enable both at the same time!
- Make sure that no other service is using port 443 on your host as otherwise the containers will fail to start. You can check this with `sudo netstat -tulpn | grep 443` before installing AIO.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden, make sure that you point `bw.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for vaultwarden.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart, make sure that you point `mail.your-nc-domain.com` to your server using an A, AAAA or CNAME record so that caddy can get a certificate automatically for stalwart.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin, make sure that you point `media.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyfin.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap, make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb, make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
- If you want to use this with https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr, make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
- If you want to use this with [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden), make sure that you point `bw.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for vaultwarden.
- If you want to use this with [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart), make sure that you point `mail.your-nc-domain.com` to your server using an A, AAAA or CNAME record so that caddy can get a certificate automatically for stalwart.
- If you want to use this with [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin), make sure that you point `media.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyfin.
- If you want to use this with [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap), make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
- If you want to use this with [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb), make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
- If you want to use this with [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr), make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
- After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
- You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup.
- You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup.**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
This container allows to manage insides of other containers via a GUI inside a Web session by allowing to run docker commands from inside this container.
### Notes
- After adding and starting the container, you need to visit `https://ip.address.of.this.server:5804` in order to log in with the user `container-management` and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning).
- Then, you should see a terminal. There you can use any docker command. ⚠️ Be very carefully while doing that as can break your instance!
- There are also some pre-made scripts that make configuring some of the community containers easier. For example scripts for [LLDAP](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) and [Facerecognition](https://github.com/nextcloud/all-in-one/tree/main/community-containers/facerecognition).
- ⚠️ After you are done doing your operations, remove the container for better security again from the stack: https://github.com/nextcloud/all-in-one/tree/main/community-containers#how-to-remove-containers-from-aios-stack
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -4,7 +4,8 @@ This container bundles the external model of facerecognition and auto-configures
### Notes
- This container needs imaginary in order to analyze modern file format images. Make sure to enable imaginary in the AIO interface before adding this container.
- The image analysis is currently set to fixed value of `1G`. See [this](https://github.com/search?q=repo%3Anextcloud%2Fall-in-one+1G+path%3A%2F%5Ecommunity-containers%5C%2Ffacerecognition%5C%2F%2F&type=code)
- Facerecognition is by default disabled for all users, if you want to enable facerecognition for all users, you can run the following before adding this container:
- Facerecognition is by default disabled for all users. If you want to enable facerecognition for all users, you can run the following commands before adding this container:<br>
**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /facerecognition.sh`.
@@ -22,7 +23,8 @@ This container bundles the external model of facerecognition and auto-configures
# Exit the container shell
exit
```
- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.
- If facerecognition shall analyze shared files & folders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_shared_files --value true`), groupfolders (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_group_files --value true`) and/or external storages (`sudo docker exec --user www-data -it nextcloud-aio-nextcloud php occ config:app:set facerecognition handle_external_files --value true`) in Nextcloud, you need to enable support for it manually first by running the mentioned commands before adding this container. See https://github.com/matiasdelellis/facerecognition/wiki/Settings#hidden-settings for further notes on each of these settings.<br>
**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -4,6 +4,7 @@ This container bundles fail2ban and auto-configures it for you in order to block
### Notes
- If you get an error like `"ip6tables v1.8.9 (legacy): can't initialize ip6tables table filter': Table does not exist (do you need to insmod?)"`, you need to enable ip6tables on your host via `sudo modprobe ip6table_filter`.
- If you get an error like `stderr: 'iptables: No chain/target/match by that name.'` and `stderr: 'ip6tables: No chain/target/match by that name.'`, you need to follow https://github.com/szaimen/aio-fail2ban/issues/9#issuecomment-2026898790 in order to resolve this.
- You can unban ip addresses like so for example: `docker exec -it nextcloud-aio-fail2ban fail2ban-client set nextcloud unbanip 203.113.167.162`. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -4,8 +4,8 @@ This container bundles Jellyseerr and auto-configures it for you.
### Notes
- This container is only intended to be used inside home networks as it uses http for its management page by default.
- After adding and starting the container, you can directly visit `http://ip.address.of.server:5055` and access your new Jellyseerr instance, which can be used to manage Plex, Jellyfin, and Emby.
- In order to access your Jellyseerr outside the local network, you have to set up your own reverse proxy. You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) and [Jellyseerr's reverse proxy documentation.](https://docs.jellyseerr.dev/extending-jellyseerr/reverse-proxy), OR use the Caddy community container that will automatically configure requests.$NC_DOMAIN to redirect to your Jellyseerr.
- If you want to secure the installation with fail2ban, you might want to check out https://github.com/nextcloud/all-in-one/tree/main/community-containers/fail2ban
- In order to access your Jellyseerr outside the local network, you have to set up your own reverse proxy. You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) and [Jellyseerr's reverse proxy documentation.](https://docs.jellyseerr.dev/extending-jellyseerr/reverse-proxy), OR use the Caddy community container that will automatically configure requests.$NC_DOMAIN to redirect to your Jellyseerr. Note that it is recommended to [enable CSRF protection in Jellyseerr](https://docs.jellyseerr.dev/using-jellyseerr/settings/general#enable-csrf-protection) for added security if you plan to use Jellyseerr outside the local network, but make sure to read up on it and understand the caveats first.
- If you want to secure the installation with fail2ban, you might want to check out https://github.com/nextcloud/all-in-one/tree/main/community-containers/fail2ban. Note that [enabling the proxy support option in Jellyseerr](https://docs.jellyseerr.dev/using-jellyseerr/settings/general#enable-proxy-support) is required for this to work properly.
- The config of Jellyseerr will be automatically included in AIO's backup solution!
- See [here](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) how to add it to the AIO stack.
This container bundles LibreTranslate and auto-configures it for you.
> [!WARNING]
> The LibreTranslate container and app is deprecated!
> Please use the [translate2 app](https://apps.nextcloud.com/apps/translate2) instead.
> You can activate it by first enabling the Docker-Socket-Proxy in the AIO-interface and then heading over to `https://your-nc-domain.com/settings/apps/tools` and installing and enabling the `Local Machine Translation` app.
### Notes
- After the initial startup is done, you might want to change the default language to translate from and to via:
**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /lldap.sh`.
@@ -8,7 +8,7 @@ This container contains a fork of the Nginx Proxy Manager, which is a WebUI for
- After the container was started the first time, please check the logs for errors. Then you can open NPMplus on `https://<ip>:81` and change the password.
- The default password is `iArhP1j7p1P6TA92FA2FMbbUGYqwcYzxC4AVEe12Wbi94FY9gNN62aKyF1shrvG4NycjjX9KfmDQiwkLZH1ZDR9xMjiG2QmoHXi` and the default email is `admin@example.org`
- If you want to use NPMplus behind a domain and outside localhost just create a new proxy host inside the NPMplus which proxies to `https`, `127.0.0.1` and port `81` - all other settings should be the same as for the AIO host.
- If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume
- If you want to set env options from this [compose.yaml](https://github.com/ZoeyVid/NPMplus/blob/develop/compose.yaml), please set them inside the `.env` file which you can find in the `nextcloud_aio_npmplus` volume**Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
- The data (certs, configs, etc.) of NPMplus will be automatically included in AIOs backup solution!
- **Important:** you always need to enable https for your hosts, since `DISABLE_HTTP` is set to true by default
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -6,7 +6,7 @@ This container bundles pi-hole and auto-configures it for you.
- Make sure that no dns server is already running by checking with `sudo netstat -tulpn | grep 53`. Otherwise the container will not be able to start!
- The DHCP functionality of Pi-hole has been disabled!
- The data of pi-hole will be automatically included in AIOs backup solution!
- After adding and starting the container, you can visit `http://ip.address.of.this.server:8573/admin` in order to log in with the admin key that you can retrieve when running `sudo docker inspect nextcloud-aio-pihole | grep WEBPASSWORD`. There you can configure the pi-hole setup. Also you can add local dns records.
- After adding and starting the container, you can visit `http://ip.address.of.this.server:8573/admin` in order to log in with the admin key that you can see next to the container in the AIO interface. There you can configure the pi-hole setup. Also you can add local dns records.
- You can configure your home network now to use pi-hole as its dns server by configuring your router.
- Additionally, you can configure the docker daemon to use that by editing `/etc/docker/daemon.json` and adding ` { "dns" : [ "ip.address.of.this.server" , "8.8.8.8" ] } `.
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -5,9 +5,8 @@ This directory features containers that are built for AIO which allows to add ad
All containers that are in this directory are community maintained so the responsibility is on the community to keep them updated and secure. There is no guarantee that this will be the case in the future.
## How to use this?
Before adding any additional container, make sure to create a backup via the AIO interface!
Afterwards, you might want to add additional community containers to the default AIO stack. You can do so by adding `--env AIO_COMMUNITY_CONTAINERS="container1 container2"` to the docker run command of the mastercontainer (but before the last line `nextcloud/all-in-one:latest`! If it was started already, you will need to stop the mastercontainer, remove it (no data will be lost) and recreate it using the docker run command that you initially used) and customize the value to your fitting. It must match the folder names in this directory! ⚠️⚠️⚠️ Please review the folder for documentation on each of the containers before adding them! Not reviewing the documentation for each of them first might break starting the AIO containers because e.g. fail2ban only works on Linux and not on Docker Desktop! **Hint:** If the containers where running already, in order to actually start the added container, you need to click on `Stop containers` and the `Update and start containers` in order to actually start it.
Starting with v11 of AIO, the management of Community Containers is done via the AIO interface (it is the last section in the AIO interface, so only visible if you scroll down).
⚠️⚠️⚠️ Please review the folder for documentation on each of the containers before adding them! Not reviewing the documentation for each of them first might break starting the AIO containers because e.g. fail2ban only works on Linux and not on Docker Desktop! **Hint:** If the containers where running already, in order to actually start the added container, you need to click on `Stop containers` and the `Update and start containers` in order to actually start it.
## How to add containers?
Simply submit a PR by creating a new folder in this directory: https://github.com/nextcloud/all-in-one/tree/main/community-containers with the name of your container. It must include a json file with the same name and with correct syntax and a readme.md with additional information. You might get inspired by caddy, fail2ban, local-ai, libretranslate, plex, pi-hole or vaultwarden (subfolders in this directory). For a full-blown example of the json file, see https://github.com/nextcloud/all-in-one/blob/main/php/containers.json. The json-schema that it validates against can be found here: https://github.com/nextcloud/all-in-one/blob/main/php/containers-schema.json.
@@ -16,8 +15,6 @@ Simply submit a PR by creating a new folder in this directory: https://github.co
Yes, see [this list](https://github.com/nextcloud/all-in-one/issues/5251) for already existing ideas for new community containers. Feel free to pick one up and add it to this folder by following the instructions above.
## How to remove containers from AIOs stack?
In some cases, you might want to remove some community containers from the AIO stack again. Here is how to do this.
You can remove containers now via the web interface.
First, do a backup from the AIO interface in order to save the current state. Do not start the containers again afterwards! Now simply recreate the mastercontainer and remove any container from the `--env AIO_COMMUNITY_CONTAINERS="container1 container2"` that you do not actually need. If you want to remove all, simply use `--env AIO_COMMUNITY_CONTAINERS=" "`.
After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`).
After removing the containers, there might be some data left on your server that you might want to remove. You can get rid of the data by first running `sudo docker rm nextcloud-aio-container1`, (adjust `container1` accordingly) per community-container that you removed. Then run `sudo docker image prune -a` in order to remove all images that are not used anymore. As last step you can get rid of persistent data of these containers that is stored in volumes. You can check if there is some by running `sudo docker volume ls` and look for any volume that matches the ones that you removed. If so, you can remove them with `sudo docker volume rm nextcloud_aio_volume-id` (of course you need to adjust the `volume-id`). **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
This container bundles Scrutiny and auto-configures it for you.
This container bundles Scrutiny which is a frontend for SMART stats and auto-configures it for you.
### Notes
- This container should only be run in home networks
- ⚠️ This container mounts all devices from the host inside the container in order to be able to access the drives and smartctl stats which is a security issue. However no better solution was found for the time being.
- This container only works on Linux and not on Docker-Desktop.
- After adding and starting the container, you need to visit `http://internal.ip.of.server:8000` which will show the dashboard for your drives.
- It currently does not support sending notifications as no good solution was found yet that makes this possible. See https://github.com/szaimen/aio-scrutiny/issues/3
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
This container bundles an SMB-server and allows to configure it via a graphical shell script.
### Notes
- This container should only be run in home networks
- This container currently only works on amd64. See https://github.com/szaimen/aio-smbserver/issues/3
- After adding and starting the container, you need to visit `https://internal.ip.of.server:5803` in order to log in with the `smbserver` user and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning). Then type in `bash /smbserver.sh` and you will see a graphical UI for configuring the smb-server interactively.
- The config data of SMB-server will be automatically included in AIOs backup solution!
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
@@ -6,7 +6,7 @@ This container bundles vaultwarden and auto-configures it for you.
- Currently, only `bw.$NC_DOMAIN` is supported as subdomain! So if Nextcloud is using `your-domain.com`, vaultwarden will use `bw.your-domain.com`. The reverse proxy and domain must be configured accordingly!
- If you want to secure the installation with fail2ban, you might want to check out https://github.com/nextcloud/all-in-one/tree/main/community-containers/fail2ban
- The data of Vaultwarden will be automatically included in AIOs backup solution!
- After adding and starting the container, you need to visit `https://bw.your-domain.com/admin` in order to log in with the admin key that you can retrieve when running `sudo docker inspect nextcloud-aio-vaultwarden | grep ADMIN_TOKEN`. There you can configure smtp first and then invite users via mail. After this is done, you might disable the admin panel via the reverse proxy by blocking connections to the subdirectory.
- After adding and starting the container, you need to visit `https://bw.your-domain.com/admin` in order to log in with the admin key that you can see next to the container in the AIO interface. There you can configure smtp first and then invite users via mail. After this is done, you might disable the admin panel via the reverse proxy by blocking connections to the subdirectory.
- If using the caddy community container, the vaultwarden admin interface can be disabled by creating a `block-vaultwarden-admin` file in the `nextcloud-aio-caddy` folder when you open the Nextcloud files app with the default `admin` user. Afterwards restart all containers from the AIO interface and the admin interface should be disabled! You can unlock the admin interface by removing the file again and afterwards restarting the containers via the AIO interface.
- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
container_name:nextcloud-aio-mastercontainer# This line is not allowed to be changed as otherwise AIO will not work correctly
@@ -14,12 +14,12 @@ services:
- 8443:8443# Can be removed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
# environment: # Is needed when using any of the options below
# AIO_DISABLE_BACKUP_SECTION: false # Setting this to true allows to hide the backup section in the AIO interface. See https://github.com/nextcloud/all-in-one#how-to-disable-the-backup-section
# AIO_COMMUNITY_CONTAINERS: # With this variable, you can add community containers very easily. See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers
# APACHE_PORT: 11000 # Is needed when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else). See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
# APACHE_IP_BINDING: 127.0.0.1 # Should be set when running behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) that is running on the same host. See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
# APACHE_ADDITIONAL_NETWORK: frontend_net # (Optional) Connect the apache container to an additional docker network. Needed when behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) running in a different docker network on same server. See https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md
# BORG_RETENTION_POLICY: --keep-within=7d --keep-weekly=4 --keep-monthly=6 # Allows to adjust borgs retention policy. See https://github.com/nextcloud/all-in-one#how-to-adjust-borgs-retention-policy
# COLLABORA_SECCOMP_DISABLED: false # Setting this to true allows to disable Collabora's Seccomp feature. See https://github.com/nextcloud/all-in-one#how-to-disable-collaboras-seccomp-feature
# FULLTEXTSEARCH_JAVA_OPTIONS: "-Xms1024M -Xmx1024M" # Allows to adjust the fulltextsearch java options. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-fulltextsearch-java-options
# NEXTCLOUD_DATADIR: /mnt/ncdata # Allows to set the host directory for Nextcloud's datadir. ⚠️⚠️⚠️ Warning: do not set or adjust this value after the initial Nextcloud installation is done! See https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir
# NEXTCLOUD_MOUNT: /mnt/ # Allows the Nextcloud container to access the chosen directory on the host. See https://github.com/nextcloud/all-in-one#how-to-allow-the-nextcloud-container-to-access-directories-on-the-host
# NEXTCLOUD_UPLOAD_LIMIT: 16G # Can be adjusted if you need more. See https://github.com/nextcloud/all-in-one#how-to-adjust-the-upload-limit-for-nextcloud
It will now also select the developer channel for all other containers automatically.
@@ -19,6 +19,9 @@ It will now also select the developer channel for all other containers automatic
## How to publish new releases?
Simply use https://github.com/nextcloud/all-in-one/issues/180 as template.
## How to update existing instances to a new major Nextcloud version?
Simply use https://github.com/nextcloud/all-in-one/issues/6198 as template.
## How to build new containers
Go to https://github.com/nextcloud-releases/all-in-one/actions/workflows/repo-sync.yml and run the workflow that will first sync the repo and then build new container that automatically get published to `develop` and `develop-arm64`.
@@ -27,6 +30,8 @@ Before testing, make sure that at least the amd64 containers are built successfu
There is a testing-VM available for the maintainer of AIO that allows for some final testing before releasing new version. See [this](https://cloud.nextcloud.com/apps/collectives/Nextcloud%20Handbook/Technical/AIO%20testing%20VM?fileId=6350152) for details.
Additionally, there are now E2E tests available that can be run via https://github.com/nextcloud/all-in-one/actions/workflows/playwright.yml
## How to promote builds from develop to beta
1. Verify that no job is running here: https://github.com/nextcloud-releases/all-in-one/actions/workflows/build_images.yml
2. Go to https://github.com/nextcloud-releases/all-in-one/actions/workflows/promote-to-beta.yml, click on `Run workflow`.
@@ -36,8 +41,19 @@ This is documented here: https://github.com/nextcloud-releases/all-in-one/tree/m
## How to promote builds from beta to latest
1. Verify that GitHub Services are running correctly: https://www.githubstatus.com/
1. Verify that no job is running here: https://github.com/nextcloud-releases/all-in-one/actions/workflows/promote-to-beta.yml
2. Go to https://github.com/nextcloud-releases/all-in-one/actions/workflows/promote-to-latest.yml, click on `Run workflow`.
1. Go to https://github.com/nextcloud-releases/all-in-one/actions/workflows/promote-to-latest.yml, click on `Run workflow`.
## How to connect to the database?
Simply run `sudo docker exec -it nextcloud-aio-database psql -U oc_nextcloud nextcloud_database` and you should be in.
## How to locally build and test changes to mastercontainer?
1. Push changes to your own git fork and branch.
1. Use below commands to build mastercontainer image for a custom git url and branch:
1. Since the hash of a locally built image doesn't match the latest release mastercontainer, it prompts for a mandatory update. To temporarily bypass the update suffix `?bypass_mastercontainer_update` to the URL. Eg: `https://localhost:8080/containers?bypass_mastercontainer_update`
> This will enable ipv6 for all new docker networks by default! You can alternatively create the `nextcloud-aio` network with ipv6 support by hand manually via docker network create or via compose.yaml.
3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/4989 in order to recreate the network and enable ipv6 for it.
## Docker Desktop (Windows and macOS)
@@ -25,9 +29,12 @@ Then, on Windows and macOS which use Docker Desktop, you need to go into the set
> This will enable ipv6 for all new docker networks by default! You can alternatively create the `nextcloud-aio` network with ipv6 support by hand manually via dockernetwork create or via compose.yaml.
2. Add these values to the json and make sure to keep the other currently values and that you don't see `Unexpected token in JSON at position ...` before attempting to restart by clicking on `Apply & restart`.
3. Make sure that ipv6 is enabled for the internal `nextcloud-aio` network by running `sudo docker network inspect nextcloud-aio | grep EnableIPv6`. On a new instance, this command should return that it did not find a network with this name. Then you can run `sudo docker network create nextcloud-aio` in order to create the network with ipv6-support. However if it finds the network and its value `EnableIPv6` is set to false, make sure to follow https://github.com/nextcloud/all-in-one/discussions/4989 in order to recreate the network and enable ipv6 for it.
Then copy the sample.conf to default environment file, e.g. `cp sample.conf .env`, open the new conf file, e.g. with `nano .env`, edit all values that are marked with `# TODO!`, close and save the file. (Note: there is no clamav image for arm64).<br>
Then copy the sample.conf to default environment file, e.g. `cp sample.conf .env`, open the new conf file, e.g. with `nano .env`, edit all values that are marked with `# TODO!`, close and save the file.<br>
⚠️ **Warning**: Do not use the symbols `@` and `:` in your passwords. These symbols are used to build database connection strings. You will experience issues when using these symbols! Also please note that values inside the latest.yaml that are not exposed as variables are not officially supported to be changed. See for example [this report](https://github.com/nextcloud/all-in-one/issues/5612).
Now copy the provided yaml file to a compose.yaml file by running `cp latest.yml compose.yaml`.
@@ -32,9 +32,9 @@ Now copy the provided yaml file to a compose.yaml file by running `cp latest.yml
Now you should be ready to go with `sudo docker compose up`.
## Docker profiles
The default profile of `latest.yml` only provide the minimum necessary services: nextcloud, database, redis and apache. To get optional services collabora, talk, whiteboard, talk-recording, clamav, imaginary or fulltextsearch use additional arguments for each of them, for example `--profile collabora`. (Note: there is no clamav image for arm64).
The default profile of `latest.yml` only provide the minimum necessary services: nextcloud, database, redis and apache. To get optional services collabora, talk, whiteboard, talk-recording, clamav, imaginary or fulltextsearch use additional arguments for each of them, for example `--profile collabora`.
For a complete all-in-one with collabora use `sudo docker compose --profile collabora --profile talk --profile talk-recording --profile clamav --profile imaginary --profile fulltextsearch --profile whiteboard up`. (Note: there is no clamav image for arm64).
For a complete all-in-one with collabora use `sudo docker compose --profile collabora --profile talk --profile talk-recording --profile clamav --profile imaginary --profile fulltextsearch --profile whiteboard up`.
## How to update?
Since the AIO containers may change in the future, it is highly recommended to strictly follow the following procedure whenever you want to upgrade your containers.
@@ -24,8 +24,9 @@ WHITEBOARD_ENABLED="no" # Setting this to "yes" (with quotes) enables t
APACHE_IP_BINDING=0.0.0.0 # This can be changed to e.g. 127.0.0.1 if you want to run AIO behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else) and if that is running on the same host and using localhost to connect
APACHE_MAX_SIZE=17179869184 # This needs to be an integer and in sync with NEXTCLOUD_UPLOAD_LIMIT
APACHE_PORT=443 # Changing this to a different value than 443 will allow you to run it behind a web server or reverse proxy (like Apache, Nginx, Caddy, Cloudflare Tunnel and else).
ADDITIONAL_COLLABORA_OPTIONS=['--o:security.seccomp=true'] # You can add additional collabora options here by using the array syntax.
COLLABORA_DICTIONARIES="de_DE en_GB en_US es_ES fr_FR it nl pt_BR pt_PT ru" # You can change this in order to enable other dictionaries for collabora
COLLABORA_SECCOMP_POLICY=--o:security.seccomp=true # Changing the value to false allows to disable the seccomp feature of the Collabora container.
FULLTEXTSEARCH_JAVA_OPTIONS="-Xms512M -Xmx512M" # Allows to adjust the fulltextsearch java options.
INSTALL_LATEST_MAJOR=no # Setting this to yes will install the latest Major Nextcloud version upon the first installation
NEXTCLOUD_ADDITIONAL_APKS=imagemagick # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value.
NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=imagick # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value.
sed -i "s|%COLLABORA_SECCOMP_POLICY% ||g" containers.yml
sed -i '/stop_grace_period:/s/$/s/' containers.yml
sed -i '/: \[\]/d' containers.yml
sed -i 's|- source: |- |' containers.yml
@@ -74,7 +75,7 @@ do
done
sed -i 's|_ENABLED=|_ENABLED="no" # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.|' sample.conf
sed -i 's|CLAMAV_ENABLED=no.*|CLAMAV_ENABLED="no" # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically. Note: arm64 has no clamav support|' sample.conf
sed -i 's|CLAMAV_ENABLED=no.*|CLAMAV_ENABLED="no" # Setting this to "yes" (with quotes) enables the option in Nextcloud automatically.|' sample.conf
sed -i 's|TALK_ENABLED=no|TALK_ENABLED="yes"|' sample.conf
sed -i 's|COLLABORA_ENABLED=no|COLLABORA_ENABLED="yes"|' sample.conf
sed -i 's|COLLABORA_DICTIONARIES=|COLLABORA_DICTIONARIES="de_DE en_GB en_US es_ES fr_FR it nl pt_BR pt_PT ru" # You can change this in order to enable other dictionaries for collabora|' sample.conf
@@ -93,6 +94,7 @@ sed -i 's|NC_DOMAIN=|NC_DOMAIN=yourdomain.com # TODO! Needs to be chang
sed -i 's|NEXTCLOUD_PASSWORD=|NEXTCLOUD_PASSWORD= # TODO! This is the password of the initially created Nextcloud admin with username "admin".|' sample.conf
sed -i 's|TIMEZONE=|TIMEZONE=Europe/Berlin # TODO! This is the timezone that your containers will use.|' sample.conf
sed -i 's|COLLABORA_SECCOMP_POLICY=|COLLABORA_SECCOMP_POLICY=--o:security.seccomp=true # Changing the value to false allows to disable the seccomp feature of the Collabora container.|' sample.conf
sed -i 's|FULLTEXTSEARCH_JAVA_OPTIONS=|FULLTEXTSEARCH_JAVA_OPTIONS="-Xms512M -Xmx512M" # Allows to adjust the fulltextsearch java options.|' sample.conf
sed -i 's|NEXTCLOUD_STARTUP_APPS=|NEXTCLOUD_STARTUP_APPS="deck twofactor_totp tasks calendar contacts notes" # Allows to modify the Nextcloud apps that are installed on starting AIO the first time|' sample.conf
sed -i 's|NEXTCLOUD_ADDITIONAL_APKS=|NEXTCLOUD_ADDITIONAL_APKS=imagemagick # This allows to add additional packages to the Nextcloud container permanently. Default is imagemagick but can be overwritten by modifying this value.|' sample.conf
sed -i 's|NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=|NEXTCLOUD_ADDITIONAL_PHP_EXTENSIONS=imagick # This allows to add additional php extensions to the Nextcloud container permanently. Default is imagick but can be overwritten by modifying this value.|' sample.conf
sed -i "/^ nextcloud-aio-collabora:/r /tmp/additional-collabora.config" containers.yml
sed -i "/^COLLABORA_DICTIONARIES.*/i ADDITIONAL_COLLABORA_OPTIONS=['--o:security.seccomp=true'] # You can add additional collabora options here by using the array syntax." sample.conf
- e.g. `nextcloud/aio-nextcloud:php8.0-latest` or `nextcloud/aio-nextcloud:php8.0-latest-arm64`
- However, if you are unsure check the docker hub (https://hub.docker.com/r/nextcloud/aio-nextcloud/tags)
- e.g. `ghcr.io/nextcloud-releases/aio-nextcloud:php8.0-latest` or `ghcr.io/nextcloud-releases/aio-nextcloud:php8.0-latest-arm64`
- However, if you are unsure check the ghcr.io (https://github.com/nextcloud-releases/all-in-one/pkgs/container/aio-nextcloud/versions?filters%5Bversion_type%5D=tagged) and docker hub: https://hub.docker.com/r/nextcloud/aio-nextcloud/tags?name=php
- Using nano and the arrow keys to navigate:
- `sudo nano /tmp/nextcloud-aio-nextcloud` making changes as above, then `[Ctrl]+[o]` -> `[Enter]` and `[Ctrl]+[x]` to save and exit.
6. Next, stop and remove the current container:
@@ -54,14 +58,11 @@ The only way to fix this on your side is upgrading regularly (e.g. by enabling d
---
## Method 2
## Method 2 using Portainer
#### *Approach using portainer if method 1 does not work for you*
Prerequisite: have all containers from AIO interface running.
<details>
<summary>Click to expand</summary>
##### 1. Install portainer if not installed:
```bash
docker volume create portainer_data
@@ -93,8 +94,8 @@ Make **note** of the version which is compatible, rounding down to 1 digit after
- In this example we would want php 8.1 since anything with 8.2 or above is incompatible
##### 5. Find the correct container version
In general it should be ```nextcloud/aio-nextcloud:php8.x-latest-arm64``` or `nextcloud/aio-nextcloud:php8.x-latest` replacing `x` with the version you require.
However, if you are unsure check the docker hub (https://hub.docker.com/r/nextcloud/aio-nextcloud/tags)
In general it should be ```ghcr.io/nextcloud-releases/aio-nextcloud:php8.x-latest-arm64``` or `ghcr.io/nextcloud-releases/aio-nextcloud:php8.x-latest` replacing `x` with the version you require.
However, if you are unsure check the ghcr.io (https://github.com/nextcloud-releases/all-in-one/pkgs/container/aio-nextcloud/versions?filters%5Bversion_type%5D=tagged) and docker hub: https://hub.docker.com/r/nextcloud/aio-nextcloud/tags?name=php
##### 6. Replace the container
- Navigate to the ```nextcloud-aio-nextcloud``` container within portainer
@@ -119,5 +120,3 @@ docker rm portainer
docker volume rm portainer_data
```
- Make sure you close port 9443 on your firewall and delete any necessary reverse proxy hosts.
@@ -57,9 +57,9 @@ The procedure for migrating the files and the database works like this:
```
**Please note:** The exact name of the database export file is important! (`database-dump.sql`)<br>
And of course you need to to use the correct name that the Postgresql database has for the export (if `$PG_DATABASE` doesn't work directly).
1. At this point, you can finally install Nextcloud AIO on a new server/linux installation, enter your domain in the AIO interface (use the same domain that you used on your former installation) and wait until all containers are running. Then you should check the included Nextcloud version by running `sudo docker inspect nextcloud-aio-nextcloud | grep NEXTCLOUD_VERSION`. Also install all apps via the apps management site that were installed on the old Nextcloud installation. Otherwise they will show as installed, but will not work.
1. Next, take a backup using Nextcloud AIO's built-in backup solution (so that you can easily restore to this state again) (Note: this will stop all containers and is expected: don't start the container again at this point!)
1. Now, we are slowly starting to import your files and database. First, you need to modify the datadirectory that is stored inside the database export:
1. At this point, you can finally install Nextcloud AIO on a new server/linux installation, enter your domain in the AIO interface (use the same domain that you used on your former installation) and wait until all containers are running. Then you should check the included Nextcloud version by running `sudo docker inspect nextcloud-aio-nextcloud | grep NEXTCLOUD_VERSION`. On the AIO interface, use the passphrase to connect to your newly created Nextcloud instance's admin account. There, install all the Nextcloud apps that were installed on the old Nextcloud installation. If you don't, the migration will show them as installed, but they won't work.
1. Next, take a backup using Nextcloud AIO's built-in backup solution (so that you can easily restore to this state again). Once finished, all containers are automatically stopped and is expected: **don't start the container again at this point!**
1. Now, with the containers still stopped, we are slowly starting to import your files and database. First, you need to modify the datadirectory that is stored inside the database export:
1. Find out what the directory of your old Nextcloud installation is by e.g. opening the config.php file and looking at the value `datadirectory`.
1. Now, create a copy of the database file so that you can simply restore it if you should make a mistake while editing: `cp database-dump.sql database-dump.sql.backup`
1. Next, open the database export with e.g. nano: `nano database-dump.sql`
@@ -81,7 +81,6 @@ The same applies for the second statement, check with `grep " OWNER TO nextcloud
1. Next, run `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chown -R 33:0 /mnt/ncdata/` and `sudo docker run --rm --volume nextcloud_aio_nextcloud_data:/mnt/ncdata:rw alpine chmod -R 750 /mnt/ncdata/` to apply the correct permissions on the datadirectory. (Or if `NEXTCLOUD_DATADIR` was provided, apply `chown -R 33:0` and `chmod -R 750` to the chosen path.)
1. Edit the Nextcloud AIO config.php file using `sudo docker run -it --rm --volume nextcloud_aio_nextcloud:/var/www/html:rw alpine sh -c "apk add --no-cache nano && nano /var/www/html/config/config.php"` and modify only `passwordsalt`, `secret`, `instanceid` and set it to the old values that you used on your old installation. If you are brave, feel free to modify further values e.g. add your old LDAP config or S3 storage config. (Some things like Mail server config can be added back using Nextcloud's webinterface later on).
1. When you are done and saved your changes to the file, finally start the containers again and wait until all containers are running.
1. As last step, install all apps again that were installed before on your old instance by using the webinterface.
Now the whole Nextcloud instance should work again.<br>
If not, feel free to restore the AIO instance from backup and start at step 8 again.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
